Electrosorption of sodium cellulose sulfates with different substitution patterns

Various types of sodium cellulose sulfate (SCS), dissolved in a 1M LiCl solution, were investigated by alternating current (AC)polarography. The SCS samples differed in the degree of substitution (DS), thedistribution of substituents within the anhydroglucose unit (AGU), and alongthechain, due to the method of synthesis. The goal was to study theelectrosorptionbehavior, characterized by the shape of the desorption wave in the polarogram,as a function of the chemical structure of the SCS samples. The shape of thedesorption wave reflects domains of different substitution. A superimpositionofparameters like DS and pattern of substitution on the electrosorption behaviorwas observed. The AC polarography method described can be used as a tool todistinguish between an even or uneven distribution of substituents along thecellulose chain.     

Structure Determination of Cellulose Esters via Subsequent Functionalization and NMR Spectroscopy

New paths for the fast and reliable analysis of cellulose esters (CE) via subsequent functionalization and ¹H NMR spectroscopy were studied. Perpropionylation of the CE is an inexpensive and efficient method. For cellulose diacetates used as representative ester well resolved ¹H NMR spectra were obtained, which can be used for the calculation of the over all degree of substitution (DS) and the partial DS values at position 2, 3, and 6. No transesterification occurs during the subsequent acylation and a standard deviation of S² = 1.32 x 10⁻⁴ was found for a series of experiments. In case of more complex ester structures especially with extended aliphatic moieties per-4-nitrobenzoylation need to be applied prior to NMR measurements. The spectra obtained can be completely assigned and applied for the calculation of DS values.     

Synthesis of cellulose benzoates under homogeneous conditions in an ionic liquid

The ionic liquid 1-allyl-3-methylimidazolium chloride (AmimCl) as a reaction medium was studied for the synthesis of cellulose benzoates by homogeneous acylation of dissolved cellulose with benzoyl chlorides in the absence of any catalysts. Cellulose benzoates with a degree of substitution (DS) in the range from about 1 to 3.0 were accessible under mild conditions. The DS of cellulose derivatives increased with the increase of the molar ratio of benzoyl chloride/anhydroglucose unit (AGU) in cellulose, reaction time, and reaction temperature. Benzoylation of cellulose with some 4-substituted benzoyl chlorides including 4-toluoyl chloride, 4-chlorobenzoyl chloride and 4-nitrobenzoyl chloride was also readily carried out under mild conditions. Furthermore, regioselectively substituted mixed cellulose esters were synthesized in this work. All products were characterized by means of FT-IR, ¹H-NMR, and ¹³C-NMR spectroscopy. In addition, at the end of benzoylation of cellulose, the ionic liquid AmimCl was easily recycled. When the recycled AmimCl was used as the reaction media, the cellulose benzoate with a similar DS was obtained under comparable reaction conditions.     

Effect of Molecular Structure on the GasPermeability of Cellulose Aliphatate Esters简

In this work, four kinds of cellulose aliphatate esters, cellulose acetate （CA）, cellulose propionate （CP）, cellulose butyrate （CB） and cellulose acetate butyrate （CAB） are synthesized by the homogeneous acylation reactions in cellulose/AmimC1 solutions. These cellulose aliphatate esters are used to prepare gas separation membranes and the effects of molecular structure, such as substituent type, degree of substitution （DS） and distribution of substituents, on the gas permeability are studied. For CAs, as the DS increases, their gas permeabilities for all five gases （02, N2, CH4, CO and CO2） increase, and the ideal permselectivity significantly increases first and then slightly decreases. At similar DS value, the homogenously synthesized CA （distribution order of acetate substituent： C6 〉 C3 〉 C2） is superior to the heterogeneously synthesized CA （distribution order of acetate substituent： C3 〉 C2 〉 C6） in gas separation. With the increase of chain length of aliphatate substituents from acetate to propionate, and to butyrate, the gas permeability of cellulose aliphatate esters gradually increases. The cellulose mixed ester CAB with short acetate groups and relatively long butyrate groups exhibits higher gas permeability or better permselectivity than individual CA or CB via the alteration of the DS of two substituents.     

Silylation of Cellulose and Starch – Selectivity, Structure Analysis, and Subsequent Reactions

The silylation of cellulose and starch under different starting conditions is reviewed. The control of the degree of substitution (DS) and regioselectivity in dependence of the reaction pathway are discussed in detail. The synthesis of trimethylsilyl cellulose (TMSC) in the system hexamethyldisilazane (HMDS)/ammonia leads to partially and completely silylated products controlled by the amount of the components. Hydrolytic desilylation of TMSC in tetrahydrofuran (THF)/ammonia gives the partially desilylated products. The desilylation proceeds statistically along the polymer chains. The reaction of cellulose dissolved in N,N-dimethylacetamide (DMA)/LiCl with bulky thexyldimethylchlorosilane (TDSCl) in the presence of imidazole leads to 2,6-di-O-TDS cellulose. The silylation of starch dissolved in dimethylsulfoxide (DMSO) with TDSCl/pyridine results in the formation of regioselectively 2-O and 6-O functionalized silyl ethers with DS values up to 1.8. 6-O Silyl ethers of cellulose and starch were synthesized with TDSCl highly activated in the reaction system N-methylpyrrolidone (NMP)/ammonia. Two- dimensional NMR techniques after subsequent modifications of the remaining OH groups have been established as important methods for the characterization of the substitution pattern of the described silyl ethers. In the case of starch, the distribution of the substituents could be detected not only in the anhydroglucose units (AGU) but also in the non-reducing end groups (NEG).     

Homogenous synthesis of 3-allyloxy-2-hydroxypropyl-cellulose in NaOH/urea aqueous system

3-Allyloxy-2-hydroxypropylcelluloses (AHP-celluloses), reactive unsaturated cellulose derivatives, were homogeneously synthesized by the reaction of cellulose with allyl glycidyl ether (AGE) in NaOH/urea aqueous solution. Water-soluble AHP-celluloses with DS_NMR = 0.32–0.67 were prepared from microcrystalline cellulose. The degree of substitution (DS) of AHP-celluloses could be controlled by varying the molar ratio of AGE and NaOH to AGU and the reaction conditions. The structure of AHP-cellulose samples were characterized by means of FT-IR, NMR spectroscopy and size exclusion chromatography. The cellulose ether shows thermoreversible flocculation. Bromination reactions were carried out as subsequent functionalization both to illustrate the reactivity of the allyl function and to determine the DS values.     

Substitution Patterns of Cellulose Ethers - Influence of the Synthetic Pathway

Commercial cellulose ethers are usually prepared under heterogeneous reaction conditions. In contrast, this contribution also describes the derivatization under homogeneous conditions in N-methylmorpholine-N-oxide monohydrate (NMMNO*H₂O) and under heterogeneous conditions after converting native cellulose to amorphous cellulose. Amorphous cellulose is prepared by dissolving cellulose in NMMNO*H₂O followed by precipitation in different media. The degree of order and the porosity of the regenerated cellulose is significantly influenced by the content of water in the precipitating agent. The differences are described by measurements using wide angle X-ray scattering, solid-state ¹³C-NMR, mercury porosimetry, and water/liquid retention values. Three synthetic pathways (heterogeneous, heterogeneous with amorphous cellulose and homogeneous) are compared regarding the structure-property relationship of the cellulose ethers formed. Carboxymethylation, hydroxyethylation, hydroxypropylation and sulfoethylation are considered in detail. The choice of synthetic pathway has a significant influence on the degree of substitution (DS), the distribution of substituents on the level of the anhydroglucose unit (AGU), solubility behavior, and the viscosity of aqueous solutions. In general an increasing solubility and an increasing viscosity are observed from heterogeneous to heterogeneous with amorphous cellulose to homogeneous reaction conditions. There is a remarkable difference between the heterogeneously produced cellulose ethers with a DS distribution C2 ≥ C6 > C3 and the strictly homogeneous etherification in NMMNO*H₂O/organic solvent systems with a DS distribution of C3 > C2 ≫ C6. This high regioselectivity at the secondary OH-groups of the AGU may be caused by the strong solvation behavior of NMMNO*H₂O and thereby a protecting function at the C6-OH-group.     

共反应剂法合成纤维素高级脂肪酸酯

采用乙酸酐为共反应剂合成了纤维素高级脂及酸酯。运用IR,^1H NMR对合成产物的结构进行了表征。结果表明,在纤维素分子骨架上同时接技了高级脂肪酸酯基以及乙酸酯基,产物为纤维素混合酸酯。产物的酯化度值通过^1H NMR确定,可达到1.66。研究了纤维素与系列高级脂肪酸的酯化反应,结果表明,随着高级脂肪酸中碳原子数目的增加,产物的酯化度逐渐减小,而产物质量有一个先增加后减小的趋势。     

Design,synthesis, and characterization of a combined main-chain/side-chain liquid-crystalline polymer based on ethyl cellulose

A novel combined main-chain/side-chain liquid-crystalline polymer based on an ethyl cellulose main chain containing azobenzene mesogens (AzoEC) was successfully synthesized. Molecular characterization of the resulting polymers with different degrees of substitution (DS) was performed with proton nuclear magnetic resonance (¹H NMR), Fourier-transform infrared spectroscopy (FTIR), and gel permeation chromatography (GPC). Thermal stability was investigated by thermogravimetric analysis (TGA). The phase transitions and liquid-crystalline behavior of these polymers were investigated by differential-scanning calorimetry (DSC), polarized optical microscopy (POM), and wide-angle X-ray diffraction (WAXD). The results indicate that DS has substantial effect on the liquid-crystalline behavior of these polymers. AzoEC with low DS only shows the cholesteric phase similar to ethyl cellulose (EC). However, when DS increases to a specific value, AzoEC begins to show fascinating supramolecular structures. The supramolecular structure of AzoEC with maximum DS consisted of a large-scale ordered lamellar structure formed by EC main chains and a small-scale ordered structure formed by azobenzene mesogens.     

Homogenous Carboxymethylation of Cellulose in the New Alkaline Solvent LiOH/Urea Aqueous Solution

In this work, the carboxymethylation of cellulose in a new alkaline cellulose solvent, LiOH/urea aqueous solution, was investigated. Carboxymethyl cellulose (CMC) samples were characterized with FT-IR, NMR, HPLC, and viscosity measurements. Water-soluble CMC with DS = 0.36∼0.65 was prepared, from both Avicel cellulose and cotton linters in the LiOH/urea system. The total DS of CMC could be controlled by varying the molar ratio of reagents and the reaction temperature. The results from structure analysis by HPLC after complete depolymerization showed that the mole fractions of the different carboxymethylated repeating units as well as those of unmodified glucose follow a simple statistic pattern. A distribution of the carboxymethyl groups of the AGU was determined to be in the order O-6 > O-2 > O-3 position at the level.     

在苯-乙醇介质中生成的羧甲基纤维素取代基分布的研究

以三组份两相液体苯 乙醇 水为介质合成羧甲基纤维素（ＣＭＣ），应用１Ｈ ＮＭＲ谱图分析了ＣＭＣ中羧甲基在葡萄糖单元（ＡＧＵ）的Ｃ２、Ｃ３及Ｃ６位上对羟基的取代分布．结果表明，取代基的分布顺序是Ｃ６＞Ｃ２＞Ｃ３；当取代度（ＤＳ）低于１０时，Ｃ２∶Ｃ３∶Ｃ６近似于１４５∶１∶２１５；ＤＳ高于１０以后，分布趋于相同，通过对ＣＭＣ的Ｘ 衍射分析解释了取代基分布规律．同时研究了苯的影响，证实相同取代度下，在苯 乙醇 水中生成的ＣＭＣ试样，其Ｃ６位取代基分布多于在乙醇 水中生成的试样．     

Structural analysis of polymer-brush-type cellulose β-ketoesters by molecular dynamics simulation

The reason for anomalous NMR patterns of cellulose β-ketoesters, which were prepared by reaction between cellulose and ketene dimers having long alkyl chains (AKDs) under homogeneous conditions using a cellulose solvent system, was studied by molecular dynamics simulation. Cellulose/AKD β-ketoester models with degree of substitution (DS) 2.0 and degree of polymerization (DP) 5, 10, 20 or 40, and cellulose/fatty acid ester models with DS 3.0 and DP 5, 10, 20 or 40 were assembled in the simulation. The calculated results were compared with those obtained by NMR and conformation analyses of the actually prepared cellulose derivatives. The molecular dynamics simulation data showed that the average velocities of anhydroglucose units in cellulose/AKD β-ketoesters were approximately one tenth of those in cellulose/fatty acid esters. Thus, cellulose chains in the cellulose/AKD β-ketoesters are extremely restricted in motion by the β-ketoester substituents. The solid-like behavior of cellulose chains in cellulose/AKD β-ketoesters in solution state is, therefore, explainable by strong restriction in motion of cellulose chains by long, branched and bulky substituents introduced into cellulose hydroxyls in high densities via β-ketoester bonds.     

Preparation and characterization of cellulose β-ketoesters prepared by homogeneous reaction with alkylketene dimers: comparison with cellulose/fatty acid esters

Cellulose was dissolved in lithium chloride/1,3-dimethyl-2-imidazolidinone (LiCl/DMI), and reacted with alkylketene dimers (AKDs) under non-aqueous and homogeneous conditions to prepare cellulose/AKD β-ketoesters with high degrees of substitution (DS). Six AKDs synthesized from octanoic, decanoic, dodecanoic, tetradecanoic, hexadecanoic and octadecanoic acids via their fatty acid chlorides were used in this study. The cellulose/AKD β-ketoesters obtained were gummy solid at room temperature, and had DS values ranging from 1.9 to 2.9. Cellulose/fatty acid esters with DS 2.5–2.9 were also prepared as references. ¹³C-NMR spectra of the cellulose/AKD β-ketoesters showed that cellulose carbons and substituent carbons close to cellulose chains were restricted in motion and behaved like solid in solutions. In contrast, the cellulose/fatty acid esters did not demonstrate such anomalous ¹³C-NMR spectra. The unique ¹³C-NMR patterns are characteristic for the cellulose/AKD β-ketoesters, which have long and branched alkyl substituents in each anhydroglucose unit. Size-exclusion chromatography furnished with multi-angle laser light scattering (SEC-MALLS) revealed, on the other hand, that all cellulose/AKD β-ketoesters and cellulose/fatty acid esters prepared had flexible or random-coil conformations in tetrahydrofuran (THF). There were no clear differences in conformation or stiffness of cellulose chains between cellulose/AKD β-ketoesters and cellulose/fatty acid esters.     

Multi-technique surface characterization of bio-based films from sisal cellulose and its esters: a FE-SEM, μ-XPS and ToF-SIMS approach

Bio-based films were prepared from LiCl/DMAc solutions containing sisal cellulose esters (acetates, butyrates and hexanoates) with different degrees of substitution (DS 0.7–1.8) and solutions prepared with the cellulose esters and 20 wt% sisal cellulose. A novel approach for characterizing the surface morphology utilized field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS) and contact angle analysis. XPS and ToF-SIMS were a powerful combination while investigating both the ester group distribution on the surface and effects of cellulose content on the film. The surface coverage by ester aliphatic chains was estimated using XPS measurements. Fibrous structures were observed in the FE-SEM images of the cellulose and bio-based films, most likely because the sisal cellulose chains aggregated during dissolution in LiCl/DMAc. Therefore, the cellulose aggregates remained after the formation of the films and removal of the solvent. The XPS results indicated that the cellulose loading on the longer chain cellulose esters films (DS 1.8) increased the surface coverage by ester aliphatic chains (8.2 % for butyrate and 45 % for hexanoate). However, for the shortest ester chains, the surface coverage decreased (acetate, 42 %). The ToF-SIMS analyses of cellulose acetate and cellulose hexanoate films (DS 1.8) revealed that the cellulose ester groups were evenly distributed across the surface of the films.     

Studies on regioselective acylation of cellulose with bulky acid chlorides

The regioselective esterification of cellulose by reaction with bulky acyl halides including pivaloyl chloride, adamantoyl chloride and 2,4,6-trimethylbenzoyl chloride was studied. Functionalization conditions to achieve a given degree of substitution (DS) and the resulting ester substitution pattern were described in detail. One- and two-dimensional NMR spectroscopy techniques were used to confirm the structure of the esters obtained. We compared the effects on substitution of using different esterifying reagents and solvent systems including DMAc/LiCl, DMSO/TBAF, and ionic liquids (ILs).     

Accurate determination of the degree of substitution of long chain cellulose esters

The determination of the degree of substitution (DS) of fatty acid cellulose esters with alkyl chain lengths from C8 to C18 was performed by direct transesterification with trimethylsulphonium hydroxide (TMSH) using tert-butyl methyl ether (MTBE) as a solvent. Transesterification was demonstrated to be quantitative at 75 °C in 60 min. The quantification of the formed fatty acid methyl esters was performed by gas chromatography (GC). After the optimization of the method, long chain cellulose esters (LCCE) could be analyzed in a wide range of DS. The obtained values were compared to those given by other existing protocols. LCCE with DS-values in a range of 5 × 10⁻⁵ to 3 were analyzed with high accuracy. Reproducibility is weakened for high DS values if the sample has a compact aspect limiting the accessibility of TMSH to the ester functions. This method can also be suitable for the analysis of mixed cellulose esters.     

Studies on the homogeneous acetylation of cellulose in the novel solvent dimethyl sulfoxide/tetrabutylammonium fluoride trihydrate

The novel solvent dimethyl sulfoxide (DMSO)/tetrabutylammonium fluoride trihydrate (TBAF . 3H(2)O) was studied for acetylation of linters cellulose. In order to control the degree of substitution (DS), acetylation of the macromolecule was carried out at different reaction time and temperature, molar ratio of reactants, as well as under variation of the concentration of TBAF . 3H(2)O in solution. Cellulose acetate (CA) was accessible with DS ranging from 0.43 to 2.77. The change in concentration of TBAF . 3H(2)O in DMSO showed a strong influence on DS. The most appropriate reaction conditions for acetylation of linters cellulose regarding maximal DS were evaluated. The structure of the CA was characterized by means of FTIR and NMR spectroscopy. The solubility of the CA depends not only on the DS but also on the reaction conditions applied, indicating a different distribution of acetate moieties both within and between polymer chains.     

Homogeneous methylation of wood pulp cellulose dissolved in LiOH/urea/H2O

Spruce sulphite cellulose (number average degree of polymerization 620) dissolved in an aqueous solution of 8% (w/w) LiOH*H₂O and 12% (w/w) urea was methylated with dimethyl sulphate (DMS). By varying the reaction temperature between 22 and 50 °C, the molar ratio between 9 and 15 mol DMS per mol anhydroglucose unit, and the reaction time from 4 to 24 h, methyl cellulose (MC) with degree of substitution (DS) values in the range of 1.07 and 1.59 was prepared. The chemical structure of MC was analysed by FTIR and ¹H NMR spectroscopy. The turbidity (given in nephelometric turbidity units, NTU) of the aqueous solution of MC reached an optimum of 10 NTU for a product obtained with 12 mol DMS/mol AGU at 50 °C. GPC measurements revealed polymer degradation to a certain extent. The intrinsic viscosity and the Huggins constant k of the MC samples increased with increasing DS value. The MC samples possess k values higher than 0.8, indicating association of the polymer chain. The zero-shear viscosity decreased with increase of both temperature and the amount of methylation agent due to the depolymerization. During the heating/cooling cycle (20-90 °C) of the aqueous solutions of MC, it was observed that samples synthesized at 22 °C with DS values lower than 1.3 did not undergo phase separation in aqueous solution. Phase separation hysteresis with a precipitation temperature up to 80 °C was obtained for aqueous solutions of MC with DS values between 1.07 and 1.66 synthesized at higher temperatures. The functionalization pattern determined by GLC of the corresponding partially methylated glucitol acetates is close to randomness and comparable with those of commercial MC samples.     

Dynamic mechanical thermal analysis transitions of partially and fully substituted cellulose fatty esters

The main transitions of cellulose fatty esters with different degrees of substitution (DSs) were investigated with dynamic mechanical thermal analysis. Two distinct main relaxations were observed in partially substituted cellulose esters (PSCEs). They were attributed to the glass‐transition temperature and to the chain local motion of the aliphatic substituents. The temperatures of both transitions decreased when DS or the number of carbon atoms (n) of the acyl substituent increased. Conversely, all the transitions of fully substituted cellulose esters occurred within a narrow temperature range, and they did not vary significantly with n. This phenomenon was explained by the formation of a crystalline phase of the fatty substituents. The presence of few residual OH groups in PSCEs was responsible for a large increase in the storage bending modulus, and it eliminated the effect of n on damping. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 281–288, 2003     

Cellulose alkyl ester/vinyl polymer blends: effects of butyryl substitution and intramolecular copolymer composition on the miscibility

The blend miscibility of cellulose alkyl esters, mainly butyrate (CB) and acetate butyrate (CAB), with synthetic homo- and copolymers comprising N-vinyl pyrrolidone (VP) and/or vinyl acetate (VAc) units, i.e., PVP, PVAc, and P(VP-co-VAc), was examined by differential scanning calorimetry. A miscibility map for the CB/vinyl polymer systems was constructed as a function of the degree of substitution (DS) of CB and the VP fraction of the mixing component. CBs were immiscible with PVAc regardless of the DS used (2.11–2.94), but miscible or immiscible with PVP depending on whether the butyryl DS was <2.5 or >2.5. The critical value of DS≈2.5 is lower than the corresponding one (DS≈2.8) evaluated formally for cellulose acetate (CA)/PVP blend series. This lowering is ascribable to an effect of steric hindrance of the bulky butyryl substituents, leading to suppression of the hydrogen-bonding interactions, as a driving factor for miscibility attainment, between residual hydroxyls of CB and carbonyl groups of PVP. The CB/vinyl copolymer system imparted a ‘miscibility window’ in which the VP/VAc composition participated; viz., CBs of DS≈2.54–2.94 were miscible with some P(VP-co-VAc)s of 30–70Â mol% VP fractions, in spite of the immiscibility with both PVP and PVAc homopolymers. The result was interpreted in terms of another inter-component attraction derived from repulsion between the monomer ingredients constituting the vinyl copolymer component. For CAB/P(VP-co-VAc) blends, it was observed that the VP/VAc range forming such a miscibility window became further expanded, compared with the corresponding series of CB blends. Fourier transform infrared and solid-state ¹³C NMR spectroscopy revealed not only the presence or absence of the intermolecular hydrogen-bonding formation, determined according to the lower or higher DS of the cellulose ester component in the blends considered, but also a difference in the mixing scale between the polymer pairs regarded as miscible by the thermal analysis.