Cellulose-SO3H: an efficient and biodegradable solid acid for the synthesis of quinazolin-4(1H)-ones

The condensation of 2-aminobenzamide with aldehydes or ketones has been achieved using cellulosesulfonic acid under mild reaction conditions to furnish 2,3-dihydroquinazolin-4(1H)-ones in good yields with a high selectivity. The use of biodegradable solid acid catalyst, cellulosesulfonic acid makes this method quite simple, more convenient, and practical. This catalyst was also found to be very active for the synthesis of hydroxyalkylquinazolin-4-ones from cyclic enol ethers.     

Visible light photoredox-catalyzed phosphorylation of quinoxalin-2(1H)-ones

A visible light photoredox-catalyzed C-3 phosphorylation of quinoxalin-2(1H)-ones with diphenylphosphine oxide has been developed. The reaction was effectively accelerated using an inexpensive eosin B as a photoredox catalyst under ambient air at room temperature without any other metal, oxidant, or additive. This approach offers a facile way to prepare 3-diphenylphosphorylated quinoxalin-2(1H)-one derivatives.     

Silica sulfuric acid: an efficient and reusable catalyst for the one-pot synthesis of 3,4-dihydropyrimidin-2(1H)-ones

Silica sulfuric acid efficiently catalyzes the three-component Biginelli reaction between an aldehyde, a β-dicarbonyl compound and urea or thiourea in refluxing ethanol to afford the corresponding dihydropyrimidinones in high yields. The catalyst is reusable and can be applied several times without any decrease in the yield of the reactions.     

Ceria/vinylpyridine polymer nanocomposite: an ecofriendly catalyst for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones

The three-component condensation of aldehydes, β-ketoesters and urea has been carried out in water using ceria (cerium oxide, CeO₂) nanoparticles supported on poly(4vp-co-dvb) as a catalyst for the preparation of 3,4-dihydropyrimidin-2(1H)-ones in good yields. The catalyst was recovered easily and reused without loss of its activity.     

One-pot synthesis of 3,4-dihydropyrimidin-2(1H)-ones using boric acid as catalyst

A simple effective synthesis of 3,4-dihydropyrimidin-2(1H)-one derivatives, using boric acid as catalyst, from aromatic aldehydes, 1,3-dicarbonyl compounds and urea in glacial acetic acid is described. Compared with the classical Biginelli reaction conditions, this new method has the advantage of excellent yields (86-97%) and short reaction time (0.5-2 h).     

Cu(OTf)2: a reusable catalyst for high-yield synthesis of 3,4-dihydropyrimidin-2(1H)-ones

Copper(II) triflate catalyzes efficiently the three-component condensation reaction of an aldehyde, β-ketoester and urea in acetonitrile to afford the corresponding 3,4-dihydropyrimidin-2(1H)-ones in high yields. The catalyst exhibited remarkable reusable activity.     

Gallium(III) triflate-catalyzed one-pot selective synthesis of 2,3-dihydroquinazolin-4(1H)-ones and quinazolin-4(3H)-ones

A series of 2,3-dihydroquinazolin-4(1H)-ones and quinazolin-4(3H)-ones have been synthesized in good to excellent yields and high selectivity by one-pot reaction using isatoic anhydride, ammonium acetate (or amines), and aldehydes in ethanol or in DMSO under mild conditions, respectively. The reaction was efficiently promoted by 1 mol % Ga(OTf)₃ and the catalyst could be recovered easily after the reactions and reused without evident loss of reactivity.     

Di(1H,1H,2H,2H-perfluorooctyl)-dibenzo-18-crown-6: A “light fluorous” recyclable phase transfer catalyst

A series of dibenzo-18-crown-6 lariat ethers containing two C₇H₁₅ (11), (CH₂)₂C₆F₁₃ (14), (CH₂)₂C₈F₁₇ (15), NHC₇H₁₅ (18) and NHCH₂C₆F₁₃ (19) sidearms were prepared and the single crystal X-ray structure of cis-4,4′-di(1H,1H,2H,2H-perfluorodecyl)-dibenzo-18-crown-6 (15a) is reported. The “light fluorous” dibenzo-18-crown-6 ether (14) has emerged as a stable and robust PTC catalyst, which can be recycled efficiently by fluorous solid-phase extraction, and gives better PTC catalytic activity compared to the parent, non-fluorinated PTC catalyst, dibenzo-18-crown-6, and the alkylated derivative (11) in aliphatic and aromatic nucleophilic substitutions.     

The rearrangement of 1H,1′H-spiro[quinoline-4,2′-quinoxaline]-2,3′ (3H,4′H)-diones – a new and efficient method for the synthesis of 4-(benzimidazol-2-yl)quinolin-2(1H)-ones

A new and highly efficient method for the synthesis of 4-(benzimidazol-2-yl)quinolin-2(1H)-ones via the rearrangement of spiroquinoxalinones in moderate-to-excellent yields has been developed. The rearrangement represents a facile approach to medicinally important biheterocyclic compounds. Compared to other methods, the present protocol has a number of advantages such as – cost-effectiveness, avoidance of difficult of access quinolin-2-one and benzimidazole derivatives as reaction partners, and easy accessibility of starting materials, making it a highly practical approach to access various 4-(benzimidazol-2-yl)quinolin-2(1H)-ones.     

6-Chloro-2(2H)-pyranone: a new 2(2H)-pyranone synthon

6-Chloro-2(2H)-pyranone, which can be prepared in high yield from commercially available trans-glutaconic acid, undergoes facile Pd/Cu-catalyzed reaction with various 1-alkynes to give rise to the corresponding 6-(1-alkynyl)-2(2H)-pyranones in moderate to good yields. These last hitherto unknown compounds have been used as direct precursors to 6-alkyl- and 6-[(Z)-1-alkenyl]-2(2H)-pyranones.     

Efficient PhB(OH)2-catalyzed one-pot synthesis of 3-substituted isoindolin-1-ones and isobenzofuran-1(3H)-ones under solvent free conditions

An efficient and practical one-pot synthesis of 3-substituted isoindolin-1-ones and isobenzofuran-1(3H)-ones has been developed under solvent free-conditions using non-toxic and cheap phenylboronic acid as excellent catalyst. This strategy involves the sequential two-step Mannich/lactamization cascade reaction of inexpensive 2-formylbenzoic acid with primary amines and a wide variety of ketones, and an aldol/lactonization cascade reaction of 2-formylbenzoic acid with a broad range of ketones.     

Isoquinolin-1(2H)-ones and 1,6-naphthyridin-5(6H)-ones by an N-acylation-SNAr sequence

A new synthesis of 2,3-dialkyl-4-carbomethoxyisoquinolin-1(2H)-ones and 6,7-dialkyl-8-carbomethoxy-1,6-naphthyridin-5(6H)-ones is reported. The process involves treatment of a β-enaminoester with 2-fluoro-5-nitrobenzoyl chloride, 2-fluorobenzoyl chloride or 2-chloronicotinoyl chloride followed by heating in the presence of base. The conversion, which proceeds by an N-acylation-S_NAr reaction sequence, affords 50–86% yields when R¹ is n-alkyl but ≤30% yields when R¹ is α-branched.     

Solid-phase synthesis of 3-alkyl-8-arylamino-1H-imidazo[4,5-g]quinazolin-2(3H)-thiones and 3-alkyl-8-arylamino-1H-imidazo[4,5-g]quinazolin-2(3H)-ones

An efficient approach for the synthesis of 3-alkyl-8-arylamino-1H-imidazo[4,5-g]quinazolin-2(3H)-thiones and 3-alkyl-8-arylamino-1H-imidazo[4,5-g]quinazolin-2(3H)-ones on solid phase has been developed. The reaction conditions were readily amenable and the products were obtained in good yields and purities after their cleavage from the resin.     

Diketene as an alternative substrate for a new Biginelli-like multicomponent reaction: one-pot synthesis of 5-carboxamide substituted 3,4-dihydropyrimidine-2(1H)ones

5-Carboxamide substituted 3,4-dihydropyrimidine-2(1H)one derivatives were synthesized in a simple and efficient method from the one-pot four-component reactions of an aliphatic or aromatic amine, diketene, an aromatic aldehyde and urea or thiourea in the presence of p-toluenesulfonic acid as a catalyst under mild reaction conditions at ambient temperature.     

Indium(III)chloride catalyzed synthesis of novel 1H-pyrazolo[1,2-b]phthalazine-5,10-diones and 1H-pyrazolo[1,2-a]pyridazine-5,8-diones under solvent-free condition

An efficient, inexpensive and environmentally friendly synthesis of novel 3-amino-2-benzoyl-1-aryl-1H-pyrazolo[1,2-b]phthalazine-5,10-dione and 3-amino-2-benzoyl-1-aryl-1H-pyrazolo[1,2-a]pyridazine-5,8-dione derivatives has been developed via one-pot three-component reaction of phthalhydrazide or maleic hydrazide, aldehydes and arylacetonitrile in the presence of catalytic amount of InCl₃ as a Lewis acid catalyst under solvent-free conditions. The most important features of the present protocol are mild reaction conditions, short reaction times, high yields, and a wide range of functional group tolerance.     

Environmentally friendly synthesis of 2-aryl-2,3-dihydroquinazolin-4(1H)-ones by novel Co-CNTs as recoverable catalysts

The objective of this study is to investigate the possibility of using Co-CNTs as a green reaction medium and a catalyst for the cyclo-condensation of o-aminobenzamide with various aldehydes. This inexpensive, non-toxic, and readily available catalyst efficiently catalyzes the above condensation for the synthesis of 2-aryl-2,3-dihydroquinazolin-4(1H)-ones. Compared to the classical reaction, this is a simple, highly yielding, time saving, and environmentally friendly method.     

Efficient synthesis and solid state analysis of 3-(1H-pyrrol-2-yl)quinoxalin-2(1H)-one and 2-(1H-pyrrol-2-yl)-1H-benzo[d]imidazole from pyrrolo-2-ylglyoxyl acid

The synthesis of new pyrrole-functionalized quinoxalines and benzimidazole is described. Our methodology involves the condensation between 2-oxo-2-(1H-pyrrol-2-yl)acetic acid and differently substituted 1,2-phenylene diamines. Depending on the substitution and on the reaction conditions, the synthesis leads to either the pyrrolyl-quinoxaline or -benzimidazole heterocycles. Further insights concerning the structural arrangement of the pyrrolyl-quinoxaline were obtained by solid state analysis, revealing an inverted pyrrole similar to that observed for 2,3-dipyrrolyl quinoxalines. This observation accounts for the fact that strong dipolar interactions or intermolecular H-bonds may govern the structural arrangement in the solid state.     

Efficient synthesis of 2-oxazolidinones and quinazoline-2,4(1H,3H)-diones from CO2 catalyzed by tetrabutylammonium fluoride

By employing tetrabutylammonium fluoride (TBAF) as a catalyst, the various carboxylative cyclizations of the propargylic amines having internal alkynes with CO₂ proceeded to afford the corresponding 2-oxazolidinones. In this case, it was also found that the generated 2-oxazolidinones were tautomerized into the corresponding 2-oxazolones due to the basicity of TBAF. In addition, we performed the synthesis of quinazoline-2,4(1H,3H)-dione from 2-aminobenzonitrile and CO₂ by using TBAF as a catalyst.     

An efficient synthesis of 3,4-dihydropyrimidin-2(1H)-ones catalyzed by thiamine hydrochloride in water under ultrasound irradiation

An environmentally benign aqueous Biginelli protocol for the synthesis of substituted 3,4-dihydropyrimidin-2(1H)-ones using thiamine hydrochloride as a catalyst has been achieved. These ultrasound-assisted reactions proceed efficiently in water in the absence of organic solvent. Utilization of ultrasound irradiation, simple reaction conditions, isolation, and purification makes this manipulation very interesting from an economic and environmental perspective.     

A one-pot Biginelli synthesis of 3,4-dihydropyrimidin-2-(1H)-ones/thiones catalyzed by triphenylphosphine as Lewis base

We report herein the use of triphenylphosphine (TPP) as a new catalyst for the one-pot Biginelli reaction coupling of β-ketoesters, aldehydes and urea (or thiourea) to afford the corresponding dihydropyrimidinones/thiones.