Synthesis and characterization of Poly(N-isopropylacrylamide)/Poly(acrylic acid) semi-IPN nanocomposite microgels

A novel pH- and temperature-sensitive nanocomposite microgel based on linear Poly(acrylic acid) (PAAc) and Poly(N-isopropylacrylamide) (PNIPA) crosslinked by inorganic clay was synthesized by a two-step method. First, PNIPA microgel was prepared via surfactant-free emulsion polymerization by using inorganic clay as a crosslinker, and then AAc monomer was polymerized within the PNIPA microgel. The structure and morphology of the microgel were confirmed by FTIR, WXRD and TEM. The results indicated that the exfoliated clay platelets were dispersed homogeneously in the PNIPA microgels and acted as a multifunctional crosslinker, while the linear PAAc polymer chains incorporated in the PNIPA microgel network to form a semi-interpenetrating polymer network (semi-IPN) structure. The hydrodynamic diameters of the semi-IPN microgels ranged from 360 to 400 nm, which was much smaller than that of the conventional microgel prepared by using N,N′-methylenebis(acrylamide) (MBA) as a chemical crosslinker, the later was about 740 nm. The semi-IPN microgels exhibited good pH- and temperature-sensitivity, which could respond independently to both pH and temperature changes.     

Synthesis and light scattering study of microgels with interpenetrating polymer networks

Monodispersed microgels composed of poly(acrylic acid) (PAAc) and poly(N-isopropylacrylamide) (PNIPAM) interpenetrating polymer networks (IPN) were synthesized by a two-step method, first preparing PNIPAM microgel and then polymerizing acrylic acid that interpenetrates into the PNIPAM network. The growth kinetics of the IPN particle formation was obtained by measuring the turbidity and particle hydrodynamic radius (Rh) as a function of reaction time. IPN and PNIPAM microgels were characterized and compared by dynamic and static light scattering techniques. The concentrated aqueous solutions of the PNIPAM-PAAc IPN microgels exhibit an inverse thermoreversible gelation. In contrast to polymer solutions of poly(NIPAM-co-AAc) that have the inverse thermoreversible gelation, our system can self-assemble into an ordered structure, displaying bright colors. Furthermore, IPN microgels undergo the reversible volume phase transitions in response to both pH and temperature changes associated with PAAc and PNIPAM networks, respectively.     

Functionalised Microgels for Acrylic Coatings

Summary: Aqueous acrylic dispersions of hydroxy-functionalised copolymer microgel particles crosslinked with allyl methacrylate were synthesized by emulsion polymerization. The microgels were investigated as reactive polymer fillers in mixtures with a water-borne film-forming dispersion. Properties of coatings cast from mixtures of aqueous dispersion of hard microgel particles and film-forming water-borne dispersion were investigated. The swelling behaviour of microgels in selected solvents (aliphatic ketones) as a function of microgel composition is discussed as well. It was found that the swelling ability of microgels decreased with growing degree of crosslinking. Microgels comprising copolymerised butyl methacrylate swelled less in aliphatic ketones than microgels without this comonomer. This work was focused mainly on the influence of microgels incorporated in the commercial solvent-borne acrylic binders on the properties of coatings. It was shown that the application of microgels that were redispersed in acetone did not affect the surface appearance and transparency of coatings. Moreover, the presence of microgel network precursors accelerated film curing at ambient temperature and improved the final hardness of coatings.     

Synthesis and aqueous solution properties of sterically stabilized pH-responsive polyampholyte microgels

Emulsion copolymerization of poly(methacrylic acid) and poly(2-(diethylamino)ethyl methacrylate) (PMAA/PDEA) yielded pH-responsive polyampholyte microgels of 200-300 nm in diameter. These microgels showed enhanced hydrophilic behavior in aqueous medium at low and high pH, but formed large aggregates of approximately 2500 nm at intermediate pH. To achieve colloidal stability at intermediate pH, a second batch of microgels of identical monomer composition were synthesized, where monomethoxy-capped poly(ethylene glycol)methacrylate (PEGMA) was grafted onto the surface of these particles. Dynamic light-scattering measurements showed that the hydrodynamic radius, Rh, of sterically stabilized microgels was approximately 100 nm at intermediate pH and increased to 120 and 200 nm at pH 2 and 10, respectively. Between pH 4 and 6, these microgels possessed mobility close to zero and a negative second virial coefficient, A2, due to overall charge neutralization near the isoelectric pH. From the Rh, mobility, and A2, cross-linked MAA-DEA microgels with and without PEGMA retained their polyampholytic properties in solution. By varying the composition of MAA and DEA in the microgel, it is possible to vary the isoelectric point of the colloidal particles. These new microgels are being explored for use in the delivery of DNA and proteins.     

Microgels containing methacrylic acid: effects of composition on pH-triggered swelling and gelation behaviours

pH-responsive microgels are cross-linked polymer colloids that swell when the pH approaches the pK _a of the particles. In this work, we present a comprehensive investigation of pH-triggered particle swelling and gel formation for a range of microgels containing methacrylic acid (MAA). The microgels investigated have the general composition poly(A/MAA/X), where A and X are the primary co-monomer and cross-linking monomer, respectively. The primary co-monomers were methyl methacrylate (MMA), ethyl acrylate (EA) or butyl methacrylate. The cross-linking monomers were either butanediol diacrylate (BDDA) or ethyleneglycol dimethacrylate (EGDMA). The microgels were studied using scanning electron microscopy, photon correlation spectroscopy (PCS) and dynamic rheology measurements. Gel phase diagrams were also constructed. The particles swelled significantly at pH values greater than approximately 6.0. It was shown that poly(EA/MAA/X) microgels swelled more strongly than poly(MMA/MAA/X) microgels. Furthermore, greater swelling occurred for particles prepared using EGDMA than BDDA. Concentrated dispersions of all the microgels studied exhibited pH-triggered gel formation. It was found that the fluid-to-gel transitions for the majority of the six microgel dispersions investigated could be explained using PCS data. In those cases, gelation was attributed to a colloidal glass transition. Interestingly, the microgels that were considered to have the highest hydrophobic content gelation occurred under conditions where little particle swelling was evident from PCS. The data presented show that gelled poly(EA/MAA/BDDA) and poly(MMA/MAA/EGDMA) microgel dispersions have the strongest elasticities at pH = 7.     

Inverse microemulsion polymerization of sterically stabilized polyampholyte microgels

Polyampholyte microgels consisting of various compositions of poly(methacrylic acid) and poly(2-(dimethylamino)ethyl methacrylate) (PMAA-PDMA) cross-linked with allyl methacrylate (AM) were synthesized via the inverse microemulsion polymerization (IMEP) technique. To improve colloidal stability at the isoelectric point (IEP), steric stabilization via the grafting of poly(ethylene glycol) methyl ether methacrylate (PEGMA) on the surface of the microgel was performed. Potentiometric and conductometric titration showed good agreement between the targeted and experimental compositions of the microgel systems. The microgel swelled at low and high pH and possessed a compact structure near the IEP, and the diameter were in good agreement with data from the transmission electron microscopic (TEM) analyses. With increasing pH, the mobility decreased from +2 m(2)s(-1)V (1) at pH 2 to -2 m(2)s(-1)V (1) at pH 10. An empirical relationship describing the PMAA composition and IEP was proposed, where the IEP decreased with increasing PMAA content. The microgel exhibited thermal-responsive properties at high pH, which is dictated by the lower critical solution temperature of PDMA.     

Visualizing the interaction between poly-L-lysine and poly(acrylic acid) microgels using microscopy techniques: effect of electrostatics and peptide size

The interaction between lightly cross-linked poly(acrylic acid) (pAA) microgels (50-150 microm in diameter) and poly-L-lysine (pLys) was studied as a function of pH, ionic strength, peptide size, and concentration. The swelling response and distribution of polypeptides within microgel particles was monitored by micromanipulator-assisted light microscopy and confocal laser scanning microscopy, while binding isotherms of pLys in the microgels were determined spectrophotometrically. Conformational changes of pLys were investigated by circular dichroism. The molecular weight of pLys was found to influence the degree of peptide-induced microgel deswelling, largely due to limitation of peptides larger than the effective network mesh size to penetrate the entire gel. Large peptides were concentrated within a surface layer of the gel particles, and at low ionic strength this dense surface layer was shown to act as a largely steric barrier for further penetration of compounds into the gel core. Small peptides, however, distributed evenly throughout the microgel particles and were able to create large microgel volume reductions. The deswelling of microgels increased with decreasing pH, while the uptake of pLys was significantly reduced at low pH. The effect of ionic strength on the interactions of pLys and oppositely charged pAA microgels was moderate and only pronounced for deswelling of gels at high pH. A significant increase in the alpha-helix content of pLys interacting with the oppositely charged microgels was observed for high molecular weight peptides, and the extent of alpha-helix formation was as expected more pronounced at high pH, i.e., at high charge density of the microgels but reduced charge density of the peptides.     

负载纳米银复合微球制备及其催化性能

以具有温度和pH双重敏感性能的N-异丙基丙烯酰胺(NIPAM)共聚丙烯酸(AA) P(NIPAM-co-AA)高分子微凝胶为模板, 以乙醇为还原剂, 原位还原得到负载纳米银的微米尺度Ag/P(NIPAM-co-AA)复合微凝胶材料. 通过扫描电子显微镜(SEM)、X射线衍射(XRD)仪和紫外-可见(UV-Vis)分光光度计等对复合材料的形貌、组成和催化性能进行表征. 研究结果表明, Ag/P(NIPAM-co-AA)复合微球具有均一的表面结构, 微凝胶的限域作用显著提高了纳米银的分散性和稳定性. 另外, Ag/P(NIPAM-co-AA)复合微球对对硝基苯酚(4-NP)的还原具有较好的催化活性, 且其催化活性与微凝胶网络结构的溶胀、收缩行为有一定关系, 即模板微凝胶的温敏特性可以实现对对硝基苯酚催化反应活性的调控作用.     

Synthesis,Characterization, and Silver Nanoparticles Fabrication in N-isopropylacrylamide-Based Polymer Microgels for Rapid Degradation of p-Nitrophenol

Multiresponsive poly(N-isopropylacrylamide-co-methacrylic acid) microgels were synthesized by precipitation polymerization in aqueous medium. Then silver-poly(N-isopropylacrylamide-co-methacrylic acid) hybrid microgels were prepared by in-situ reduction of silver ions. Formation of microgels was confirmed by Fourier transform infrared spectroscopic analysis. pH and temperature sensitivity of microgel was studied by dynamic light scattering. Hydrodynamic radius of microgels decreases with increase in temperature at pH 8.20 and show volume phase transition temperature around 45°C. At pH 2.65, hydrodynamic radius decreases with increase in temperatures upto 35°C but further increase in temperature causes aggregation and microgel becomes unstable due to increase of hydrophobicity. With increase in pH of medium, the hydrodynamic radius of microgels increases sigmoidally. Formation of silver nanoparticles inside microgel and pH dependence of surface plasmon resonance wavelength of the hybrid microgels were investigated by ultraviolet-visible spectroscopy. The value of surface plasmon resonance band and absorbance associated with surface plasmon resonance band increases with increases in pH of the medium. The apparent rate constant of reduction of p-nitrophenol was found to be linearly dependent on volume of hybrid microgels used as catalyst. The system has a potential to be used as effective catalyst for rapid degradation of industrial pollutant.     

Cationic polyvinylamine binding to anionic microgels yields kinetically controlled structures

Polyvinylamine (PVAm) binding (absorption and adsorption) to carboxylated microgels gave colloidally stable, cationic microgels that can be centrifuged, washed, freeze dried, and redispersed in water with no loss in colloidal stability. Because both PVAm and the carboxylated microgels are pH sensitive, changes in microgel swelling and electrophoretic mobility in response to pH change can be positive or negative depending upon pH and the PVAm content of the microgels. For a given PVAm molecular weight, the steady-state saturated mass fraction of bound PVAm in the microgels varied by a factor of four in our experiments. We proposed that the PVAm content at saturation was controlled by the relative rates of the initial attachment of PVAm chains versus the rate of attached chain spreading on and into the microgel structure. This explanation was further supported by a series of quartz crystal microbalance measurements. Finally, PVAm binding to two types of PNIPAM microgels shows general features recently reported for other polyelectrolyte types. Specifically: (1) for surface localized anionic charges on the microgels, the mass fraction of bound PVAm increased with PVAm molecular weight and vice versa; (2) in virtually all conditions, the quantity of adsorbed cationic ammonium groups was much greater than the carboxylate content of the microgel; and (3) sodium chloride additions lowered the mass fraction of bound PVAm.     

浊度法表征温敏性微凝胶体积的相转变行为

以N-异丙基丙烯酰胺(NIPAM)、甲基丙烯酸(MAA)为单体,N,N-亚甲基双丙烯酰胺(MBA)为交联剂,制备了温敏性聚(N-异丙基丙烯酰胺)(PNIPAM)和具有温度、pH敏感性的聚(N-异丙基丙烯酰胺-co-甲基丙烯酸)(PNIPAM-MAA)微凝胶。通过测定不同温度和pH条件下微凝胶浊度变化,表征微凝胶的温度及pH敏感性,描述了NaCl浓度和pH对微凝胶体积相转变温度的影响。同时,测定了微凝胶的临界聚沉浓度及临界絮凝温度,表征了微凝胶的稳定性,讨论了影响微凝胶的稳定性因素。     

Symmetric and asymmetric adsorption of pH-responsive gold nanoparticles onto microgel particles and dispersion characterisation

The interaction between carboxylic acid-stabilised gold nanoparticles (AuNP) and pH-responsive microgels is shown. The microgel particles are a copolymer of N-[3-(dimethylamino)propyl]methacrylamide (DMAPMA) and N-isopropylacrylamide (NIPAM). The microgel properties are presented by their hydrodynamic diameter and electrophoretic mobility in response to pH. These microgel particles are pH-responsive under neutral conditions decreasing in diameter beyond pH 7. The dispersion characteristics of AuNP adsorbed onto the microgel network are shown with respect to adsorbed amount and the pH-responsive properties of the AuNP. This data is presented between pH 3 and 6 where the microgel properties remain constant. Asymmetric adsorption of AuNP onto poly(DMAPMA-co-NIPAM) microgels is achieved by adsorption of nanoparticles, from the aqueous phase, onto microgel-stabilised oil-in-water emulsions. These asymmetrically modified microgels display very different dispersion behaviour, in response to pH, due to their dipolar nature.     

Assembly of poly(N-isopropylacrylamide)-co-acrylic acid microgel thin films on polyelectrolyte multilayers: Effects of polyelectrolyte layer thickness, surface charge, and microgel solution pH

Temperature- and pH-sensitive poly(N-isopropylacrylamide)?Cco-acrylic acid (pNIPAm-co-AAc) microgels were deposited on glass substrates coated with polyelectrolyte multilayers composed of the polycation poly(allylamine hydrochloride) (PAH) and the polyanion poly(sodium 4-styrenesulfonate) (PSS). The microgel density and structure of the resultant films were investigated as a function of: (1) the number of PAH/PSS layers (layer thickness); (2) the charge on the outer layer of the polyelectrolyte multilayer film; and (3) the pH of microgel deposition solution. The resultant films were studied by differential interference contrast optical microscopy, atomic force microscopy, and scanning electron microscopy. It was found that the coverage of the microgels on the surface was a complex function of the pH of the deposition solution, the charge on the outer layer of the polyelectrolyte thin film and the PAH/PSS layer thickness; although it appears that microgel charge plays the biggest role in determining the resultant surface coverage.     

Swelling Kinetics of Microgels Embedded in a Polyacrylamide Hydrogel Matrix

Composite hydrogels—macroscopic hydrogels with embedded microgel particles—are expected to respond to external stimuli quickly because microgels swell much faster than bulky gels. In this work, the kinetics of the pH‐induced swelling of a composite hydrogel are studied using turbidity measurements. The embedded microgel is a pH‐ and thermosensitive poly(N‐isopropylacrylamide‐co‐acrylic acid) microgel and the hydrogel matrix is polyacrylamide. A rapid pH‐induced swelling of the embedded microgel particles is observed, confirming that composite hydrogels respond faster than ordinary hydrogels. However, compared with the free microgels, the swelling of the embedded microgel is much slower. Diffusion of OH^? into the composite hydrogel film is identified as the main reason for the slow swelling of the embedded microgel particles, as the time of the pH‐induced swelling of this film is comparable to that of OH^? diffusion into the film. The composition of the hydrogel matrix does not significantly change the characteristic swelling time of the composite hydrogel film. However, the swelling pattern of the film changes with composition of the hydrogel matrix.     

Interfacial layers of stimuli-responsive poly-(N-isopropylacrylamide-co-methacrylicacid) (PNIPAM-co-MAA) microgels characterized by interfacial rheology and compression isotherms

Stimuli-sensitive emulsions stabilized by microgel particles consisting of poly-(N-isopropylacrylamide-co-methacrylicacid) (PNIPAM-co-MAA) and being responsive to both pH and temperature have been investigated with respect to the visco-elastic properties of the interfacial layer. Properties of the interfacial layer were probed by means of shear and dilatational rheology as well as by compression isotherms and are related to the microgel packing at the interface as visualized by cryogenic scanning electron microscopy. The corresponding pH dependent emulsion stability is strongly correlated with the visco-elastic properties of the microgel covered oil-water interface. At high pH when the microgels are charged, a structure of partially interconnected microgels is found that provides elastic, soft gel-like interfaces. At low pH, however, the uncharged microgels are densely packed and the interface is rather brittle. Obviously, these pH dependent visco-elastic properties of the microgel layer at the oil-water interface play a determining role in the stability of emulsion droplets and allow us to prepare very stable emulsions when the microgels are charged and to break the emulsion by changing the pH.     

Preparation and Characterization of pH-Sensitive Microgels of Poly((2-dimethylamino) ethyl methacrylate)

Summary: pH-sensitive microgels of poly((2-dimethylamino) ethyl methacrylate) (PDMAEMA) were prepared by dispersion polymerization of 2-dimethylamino ethyl methacrylate in a mixed solvent of water/ethanol. ¹HNMR, FTIR and SEM were used to confirm the chemical structure and morphological properties of the resulting microgels. Dynamic Light Scattering (DLS) was used to measure the hydrodynamic diameter of the particles. SEM micrographs showed that the microgel particles have a diameter of about 100–200 nm in dry state. Mean hydrodynamic diameter of the particles at their collapsed state at pH = 9.5 was found to be about 150 nm. DLS measurements at various pH values showed that the prepared microgels have a volume phase transition around pH = 8 at which the hydrodynamic diameter decreased from about 470 nm to around 150 nm corresponding to a 32 fold change in the mean volume of a microgel particle.     

Temperature Response of PNIPAM Derivatives at Planar Surfaces: Comparison between Polyelectrolyte Multilayers and Adsorbed Microgels

Two strategies for the design of thermosensitive coatings based on poly‐N‐isopropyl acrylamide (PNIPAM) derivatives are presented: 1) polyelectrolyte multilayers containing a diblock copolymer with a large PNIPAM block and 2) adsorption of PNIPAM microgels. The multilayers show only a small but irreversible response to the increase of outer temperature due to the strong interdigitation between the charged part and the temperature‐sensitive block, while the adsorbed microgels show a pronounced and reversible response. It will be shown that the microgel number density can be easily controlled at the substrate. The swelling and shrinking of two extremes in density are characterized: densely packed microgels, which are considered as a film, and individual microgels, which are able to swell and shrink also lateral to the surface.     

A new route to poly(N-isopropylacrylamide) microgels supporting a polyvinylamine corona

Poly(N-isopropylacrylamide) thermoresponsive microgel particles with an amine-rich corona were prepared by the copolymerization of N-isopropylacrylamide with N-vinylformamide, NVF. Hydrolysis above the volume phase transition temperature converted the surface formamide moieties to the corresponding amine. The surface amine concentration was enriched by coupling iodine-terminated polyNVF oligomers (DP=7) to the microgel amines, followed by a second hydrolysis to give the corresponding polyvinylamine. Microgel swelling and electrophoretic mobility values as functions of pH and temperature were consistent with published results for amine-containing microgels.     

A comparison of the swelling behaviour of copolymer and interpenetrating network microgel particles

 A comparison of the swelling behaviour of two types of hydrogel particles, namely, random poly[(acrylic acid)-co-(acrylamide)] [P(AAc-co-AAm)] particles and PAAc/PAAm interpenetrating network (IPN) particles, has been made using temperature and pH as the triggers. Both types of particles were synthesised by inverse microemulsion polymerisation. The conversion yield of AAc was found to be around 60 wt% due to the partition of this monomer between the aqueous and organic phases. The AAc content was thus lower in the final particles than in the initial composition. Both types of hydrogel particle exhibit an upper critical solution temperature associated with the breakage of the polymer–polymer hydrogen bonds. The maximum swelling ratio occurred in both cases at approximately equimolar AAc and AAm content of the particles. A sharper swelling transition was observed for the PAAc/PAAm IPN particles. This is because of the co-operative nature of the interactions between the PAAc and PAAm chains, the so-called “zipper effect”. A very much higher swelling ratio was obtained using pH as the trigger compared to using temperature. This difference in behaviour is related to the relative strengths of the forces involved in the particle swelling. Electrostatic repulsion forces, associated with the AAc dissociation with increasing pH, are much stronger than the hydrogen bonds. Received: 18 August 1999/Accepted: 28 August 1999     

Isothermal titration calorimetric studies of the acid-base properties of poly(N-isopropylacrylamide-co-4-vinylpyridine) cationic polyelectrolyte colloidal microgels

Isothermal titration calorimetry (ITC) and potentiometric titration were used to study the protonation properties of the 4-vinylpyridine (4-VP) moiety in cationic poly(N-isopropylacrylamide-co-4-vinylpyridine) colloidal microgels [poly(NIPAM-co-4-VP)]. Calorimetric pH titrations were performed using microgels of different 4-VP content and the influence of ionic strength and counter ions have been examined. The calorimetric titration output consists of several thermal contributions reflecting the complex nature of the interactions in the aqueous microgel dispersions. In contrast to the potentiometric results, the calorimetric titration data could not be completely described by a theoretical model solely taking into account protonation equilibria. Deviations from the proposed model correlate with swelling or shrinking of the gel particles. The calorimetric results also reveal a pronounced counter-ion effect of perchlorate compared to chloride ions. In the presence of perchlorate ions, small secondary thermal effects accompany protonation of the 4-VP moiety due, in part, to kinetically limited conformational changes in the co-polymer microgel.