Capillary electrophoretic separation of dicarboxylic acids in atmospheric aerosol particles

2,3-Pyrazinedicarboxylic acid (PZDA), 2,6-pyridinedicarboxylic acid (PDA) and 2,3-pyridinedicarboxylic acid (QUIN) solutions were studied as background electrolytes (BGEs) in the capillary electrophoretic analysis of dicarboxylic acids in aerosol particles with indirect UV detection. The BGEs were selected on the basis of similarity in structure with the analytes so that mobilities would be compatible. Optimised pH values for PZDA, PDA and QUIN solutions were 10.6, 11.0 and 10.2, respectively. Myristyltrimethylammonium hydroxide and myristyltrimethylammonium bromide were added to reverse the electroosmotic flow in the solutions in the direction of anode to enable fast anion detection. Separation was obtained for nine dicarboxylic acids (C₂–C₁₀) differing in the number of CH₂ groups in their skeleton. The electrophoretic mobilities were determined to lie in the range 3.0×10⁻⁴–7.0×10⁻⁴ cm² V⁻¹ s⁻¹. The relative standard deviations (RSDs) for the absolute migration times of the analytes were mostly less than 0.5% (n=6) in PZDA solution. In PDA solution the within-day and day-to-day RSD values for migration were less than 1% and between 2 and 4%, respectively. Peak heights and areas mostly deviated between 1 and 15% in both PZDA and PDA solutions. Detection limits ranged between 1 and 5 mg/l. Methods were applied to the analysis of dicarboxylic acids isolated from aerosol particles.     

Thermal Studies on Some Substituted Aminobenzoic Acids

The thermal behaviour of various substituted aminobenzoic acids(3-aminobenzoic acid (3-ABA), 4-aminobenzoic acid (4-ABA), 3-aminosalicylic acid(3-ASA), 4-aminosalicylic acid (4-ASA), and 5-aminosalicylic acid (5-ASA), as well as the‘parent’ benzoic acid (BA) and salicylic acid (SA) as reference substances, and possible decomposition products: 2-aminophenol (2-AP), 3-aminophenol (3-AP) and 4-aminophenol(4-AP) in the solid state has been examined. The various sets of isomers studied showed considerable and interesting differences. Most sublimed well before melting, generally with an increasing rate of mass loss beyond their very different melting points. The differences in behaviour of 4-ASA and 5-ASA were the most remarkable, with 5-ASA being far more stable and apparently not decarboxylating readily, while 4-ASA sublimed at temperatures below the melting point, becoming less stable and decarboxylating in the liquid form. This revised version was published online in July 2006 with corrections to the Cover Date.     

Application of zirconium-modified silica gel as a stationary phase in the ion-exclusion chromatography of carboxylic acids I. Separation of benzenecarboxylic acids with tartaric acid as eluent and with UV-photometric detection

The application of zirconium-modified silica gels (Zr–Silicas) as stationary phases for ion-exclusion chromatography with UV-photometric detection (IEC–PD) for mono-, di-, tri- and tetrabenzenecarboxylic acids (pyromellitic, trimellitic, hemimellitic, o-phthalic, salicylic and benzoic acids) and phenol was carried out using tartaric acid as the eluent. Zr–Silicas were prepared by the reaction of the silanol group on the surface of silica gel with zirconium tetrabutoxide [Zr(OCH₂CH₂CH₂CH₃)₄] in ethanol solution. The effect of the amount of zirconium adsorbed on silica gel on chromatographic behavior of these benzenecarboxylic acids and phenol was investigated. As a result, Zr–Silica adsorbed on 20 mg zirconium g⁻¹ silica gel was the most suitable stationary phase in the IEC–PD for the simultaneous separation of these benzenecarboxylic acids and phenol. Excellent simultaneous separation and highly sensitive UV detection at 254 nm for these benzenecarboxylic acids and phenol were achieved in 20 min by the IEC–PD using the Zr–Silica column (250×4.6 mm I.D.) and a 10 mM tartaric acid at pH 2.5 as eluent.     

Chiral α-Amino Acid-Based NMR Solvating Agents

Four new chiral α-(nonafluoro-tert-butoxy)carboxylic acids were synthesized from naturally occurring α-amino acids (alanine, valine, leucine and isoleucine, respectively), and tested in ¹H- and ¹⁹F-NMR experiments as chiral NMR shift reagents. The NMR studies were carried out at room temperature, using CDCl₃ and C₆D₆ as solvents, and (RS)-α-phenylethylamine and (RS)-α-(1-naphthyl)ethylamine as racemic model compounds. To demonstrate the applicability of the reagents, the racemic drugs ketamine and prasugrel were also tested.     

Synthesis of Arylglyoxylic Acids and Their Collision-Induced Dissociation

Abstract

A variety of substituted arylglyoxylic acids (2a?g) were synthesized via oxidation of the corresponding aryl-methylketones (1a–e) using selenium dioxide or Friedel–Crafts acylation of phenol (3) with ethyl chlorooxoacetate and further transformations. It was found that the arylglyoxylic acids (2) undergo facile unimolecular dissociation with loss of carbon monoxide to give the corresponding arylcarboxylic acids (7) under collisionally induced mass spectrometric conditions.     

Synthesis and properties of aromatic polyamides based on non-, methyl-, and phenyl-substituted 4,4′-bis(1,4-phenylenedioxy)dibenzoic acids

4,4′-(1,4-Phenylenedioxy)dibenzoic acid (3), 4,4′-(2,5-tolylenedioxy)dibenzoic acid (Me-3), and 4,4′-(2,5-biphenylenedioxy)dibenzoic acid (Ph-3) were prepared by the nucleophilic substitution reaction of p-fluorobenzonitrile with hydroquinone, methylhydroquinone, and phenylhydroquinone, respectively, followed by alkaline hydrolysis. Several aromatic polyamides having inherent viscosities of 0.66–1.34 dL/g were directly prepared by a Yamazaki phosphorylation polyamidation technique from dicarboxylic acids 3, Me-3, and Ph-3, respectively, with aromatic diamines using triphenyl phosphite and pyridine as condensing agents. The solubility of methyl- or phenyl-substituted polyamides was remarkably enhanced when compared to that of nonsubstituted analogues. Most of the substituted polyamides revealed an amorphous nature and were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), N,N-dimethylformamide, dimethyl sulfoxide, and m-cresol. Transparent, flexible, and tough films of these polymers could be cast from the DMAc or NMP solutions. These films had tensile strength of 60–100 MPa, elongation to break of 6–11%, and tensile modulus of 1.68–2.25 GPa. The glass transition temperatures (T_g) of most polyamides could be determined by differential scanning calorimetry (DSC) and were in the range of 200–232°C. Thermogravimetric analyses established that these polymers were fairly stable up to 450°C, and the 10% weight loss temperatures were recorded in the range of 458–535°C in nitrogen and 468–528°C in air atmosphere. In general, the phenyl-substituted polyamides exhibited relatively higher T_g, thermal stability, and solubility. © 1996 John Wiley & Sons, Inc.     

Retention modelling of electrostatic and adsorption effects of aliphatic and aromatic carboxylic acids in ion-exclusion chromatography

The retention mechanism of aliphatic and aromatic carboxylic acids in ion-exclusion chromatography has been investigated with consideration of simultaneous electrostatic repulsion effects and hydrophobic adsorption effects. A mathematical relationship between the retention factor of the analyte and the mobile-phase composition (sulfuric acid concentration and percentage of methanol), the type of analyte (pK_a and hydrophobicity) and some physical characteristics of the stationary phase has been derived. Thirteen carboxylic acids (comprising mono- and divalent, aliphatic and aromatic acids) were chosen and used to acquire retention data on three different cation-exchange stationary phases (in which the sulfonate functional groups are bound to polystyrene–divinylbenzene, polymethacrylate or silica) using 14 mobile-phase compositions of varying pH and percent methanol. These retention data were used to derive the parameters necessary to solve the retention model using non-linear regression. In this way, a quantitative measure of the effects of adsorption phenomena on analyte retention were obtained. The model was then used to optimise the separation of nine carboxylic acids.     

Synthesis of (S)-(+)-enantiomers of food-relevant (n-5)-monoenoic and saturated anteiso-fatty acids by a Wittig reaction

We developed an enantioselective synthesis for the food-relevant anteiso-fatty acids a15:0, a16:0, and a17:0. Different (carboxyalkyl)triphenylphosphonium bromide salts were coupled with (S)-3-methylpentanal in a Wittig reaction. Mixtures of the obtained cis-/trans-isomers were separated by Ag⁺-HPLC to give the novel cis-isomers of (S)-(+)-a15:1n-5, (S)-(+)-a16:1n-5, and (S)-(+)-a17:1n-5. Hydrogenation of the monoenoic products led to (S)-(+)-a15:0, (S)-(+)-a16:0, and (S)-(+)-a17:0, which are essential for the assessment of the bioactivity of tests with standards of anteiso-fatty acids.     

Determination of C4–C14 carboxylic acids by capillary zone electrophoresis: Application to the identification of diamide degradation products and partitioning studies

Capillary zone electrophoresis (CZE) was investigated for the determination of linear saturated carboxylic acid homologues ranging from C₄ to C₁₄. Separation conditions were optimised to overcome the problems of decreasing solubility and decreasing selectivity between successive homologues with increasing chain length. Separations were performed at 20°C, using a 20 kV separation voltage and a pH 8 electrolyte containing 30% methanol. A suitable chromophore (4-aminobenzoate) was added to ensure indirect UV detection of the analytes. Calibration curves and repeatability were established. Minimum detectable concentrations of 3·10⁻⁶ mol l⁻¹ were achieved. Resolution between successive homologues was better than 2. The electrophoretic mobility of each homologue (n=7–14) was assessed and a quasi-linear relationship between the mobility value and 1/n was observed. The quantitative analysis of a diamide degradation solution was performed and compared to potentiometric results. The CZE method was also applied to the determination of C₇–C₁₄ partitioning between an organic medium containing tributylphosphate in n-dodecane and different basic solutions. Their behaviour was established according to the chain length and the pH of the aqueous phase. For C₁₀–C₁₄ compounds, results were validated by comparison with gas chromatographic analysis of the organic phases.     

Reversed-phase high-performance liquid chromatography of fatty acid methyl esters with particular reference to cyclopropenoic and cyclopropanoic acids

High performance liquid chromatography of saturated, monounsaturated, diunsaturated, triunsaturated, cyclopropenoic (malvalic and sterculic) and cyclopropanoic (cis-8,9-methylenehexadecanoic and dihydrosterculic) fatty acids was performed with their methyl esters. All separations were carried out with two types of reversed phase columns, the eluent consisting of an acetonitrile/water mixture. The effect of water was studied in the range 0–15%. The best separation was obtained with acetonitrile/water (85:15 v/v). Quantitative results indicated that the detection limits depended upon ultraviolet wavelength and in the present study were 4 ng of methyl sterculate and 125 ng of methyl dihydrosterculate at 195 nm.     

Analysis of Free Amino Acids and Protein Contents of Mature Human Milk from Turkish Mothers

Abstract

This study was designed to evaluate free amino acid (FAA) composition and total protein in mature human milk from Turkish mothers. Free amino acid concentrations in mature human milk were determined in all subjects using a high‐performance liquid chromatography (HPLC) with postcolumn derivatization system, with a fluorescence detector. Total protein content was determined by the classical biuret method. Total protein concentration was found to be 1.3±0.4 mg/dl. Glutamic asid plus glutamine is the most abundant amino acid (1275 µmol/L), followed by taurine (353 µmol/L) and alanine (261 µmol/L). Glutamic acid plus glutamine accounts for the most free amino acids in mature human milk and their sum represents 40% of total FAA. On the other hand, some amino acid derivatives such as citrulline, ethanolamine, ammonium, ornithine, ortophosphoserine, and phosphoethanolamine, not usually a part of protein, are determined and this fraction represented ～21% of the total FAA in mature human milk in the present study.     

Characterization of Bioactive Compounds of Opuntia ficus-indica (L.) Mill. Seeds from Spanish Cultivars

Opuntia ficus-indica (L.) Mill. is the Cactaceae plant with the greatest economic relevance in the world. It can be used for medicinal purposes, animal nutrition, production of biofuels and phytoremediation of soils. Due to its high content of bioactive compounds, the prickly pear has antioxidant, antimicrobial and anticancer properties. The aim of this study was to determine the polyphenolic, fatty acid and amino acid profile and characterize the antioxidant capacity of seeds of seven Spanish prickly pear cultivars. A total of 21 metabolites, mainly phenolic acids and flavonols, were identified using ultraperformance liquid chromatography photodiode detector quadrupole/time-of-flight mass spectrometry (UPLC-PDA-Q/TOF-MS). Significant differences were found in the phenolic concentrations of the investigated varieties. The highest amount of phenolic compounds (266.67 mg/kg dry matter) were found in the “Nopal espinoso” variety, while the “Fresa” variety was characterized by the lowest content (34.07 mg/kg DM) of these compounds. In vitro antioxidant capacity was positively correlated with the amount of polyphenols. The amino acid composition of protein contained in prickly pear seeds was influenced by the variety. Glutamic acid was the predominant amino acid followed by arginine, aspartic acid and leucine, independent of prickly pear variety. Overall, 13 different fatty acids were identified and assessed in prickly pear seeds. The dominant fatty acid was linoleic acid, with content varying between 57.72% “Nopal ovalado” and 63.11% “Nopal espinoso”.     

Capillary electrophoretic and thin-layer chromatographic characterization of rhenium complexation with 1-hydroxyethylidenediphosphonic acid

1-Hydroxyethylidenediphosphonic acid (HEDP) labeled by short-lived radionuclides with the nuclear properties suitable for the therapeutical purposes (¹⁸⁶Re, ¹⁸⁸Re, ¹⁶⁶Ho) is similar to the other phosphonates widely applied in the radiopharmaceutical field for the treatment of palliative bone metastases. One of the important steps for the preparation of compounds of radiopharmaceutical interest is the quality control comprehending the radiochemical and chemical purity determination. Chromatographic methods as TLC and HPLC are mostly used for this purpose. Our experiments were focused on the application of capillary electrophoresis with UV detection to the study of rhenium complexation with HEDP. The influence of pH, concentration of the ligand and the reaction time were determined. Taking in account our previous results, the Re:SnCl₂ molar ratio 1:500 (for 0.1 mM Re) was applied to reduce perrhenate to lower oxidation states which enables the Re–HEDP complexation. Different background electrolytes were tested. The mixture of 40 mM Na₂HPO₄ with 15 mM HEDP adjusted to pH 8 was selected as the most suitable system because it enabled the separation of different forms of Re–HEDP complexes. The results obtained in this study were compared to those obtained by thin-layer chromatography with radiometric detection.     

Determination of C4-C14 carboxylic acids by capillary zone electrophoresis. Application to the identification of diamide degradation products and partitioning studies.

Capillary zone electrophoresis (CZE) was investigated for the determination of linear saturated carboxylic acid homologues ranging from C₄ to C₁₄. Separation conditions were optimised to overcome the problems of decreasing solubility and decreasing selectivity between successive homologues with increasing chain length. Separations were performed at 20°C, using a 20 kV separation voltage and a pH 8 electrolyte containing 30% methanol. A suitable chromophore (4-aminobenzoate) was added to ensure indirect UV detection of the analytes. Calibration curves and repeatability were established. Minimum detectable concentrations of 3·10⁻⁶ mol l⁻¹ were achieved. Resolution between successive homologues was better than 2. The electrophoretic mobility of each homologue (n=7–14) was assessed and a quasi-linear relationship between the mobility value and 1/n was observed. The quantitative analysis of a diamide degradation solution was performed and compared to potentiometric results. The CZE method was also applied to the determination of C₇–C₁₄ partitioning between an organic medium containing tributylphosphate in n-dodecane and different basic solutions. Their behaviour was established according to the chain length and the pH of the aqueous phase. For C₁₀–C₁₄ compounds, results were validated by comparison with gas chromatographic analysis of the organic phases.     

Lewis Acid‐Mediated Addition of Amino Acid‐Substituted α‐Allylsilanes to Aromatic Acetals

Unnatural amino acids extend the pharmacological formulator's toolkit. Strategies to prepare unnatural amino acid derivatives using Lewis acid‐activated allylsilane reactions are few. In this regard, we examined the utility of allylsilanes bearing an amino acid substituent in the reaction. Diastereoselective addition of methyl 2‐(N‐PG‐amino)‐3‐(trimethylsilyl)pent‐4‐enoate and methyl (E)‐2‐(N‐PG‐amino)‐3‐(trimethylsilyl)hex‐4‐enoate (PG=protecting group), 2 and 13 , respectively, to aromatic acetals in the presence of Lewis acids is described. Of those examined, TiCl₄ was found to be the most effective Lewis acid for promoting the addition. At least 1 equiv. of TiCl₄ was required to achieve high yields, whereas 2 equiv. of BF₃?OEt₂ were required for comparable outcomes. Excellent selectivity (>99% syn/anti) and high yield (up to 89%) were obtained with halo‐substituted aromatic acetals, while more electron‐rich electrophiles led to both lower yields and diastereoselectivities.     

Lipid classes of in vitro cultivar of Pakistani citrus

The in vitro cultivar of citrus contained 18.0% lipids after 12 weeks of germination of seed. The lipid was analyzed by GC procedure for its fatty acid composition. The oil contained seven major fatty acid constituents which were later identified by GC. The oil was further analyzed for its classes by means of thin layer chromatography and gas chromatography. The major portion of the lipid classes comprised of neutral lipids (93.9%) and polar lipids (6.1%). The identified neutral lipids comprised of hydrocarbon (1.4%), wax esters (1.5%), sterol esters (5.2%), triglycerides (52.3%), free fatty acids (1.3%), 1,3-diglycerides (6.0%), 1,2-diglycerides (5.0%), glycol (15.2%), sterols (6.0%), 2-monoglycerides (6.4%), 1-monoglycerides (5.3%) and the identified polar lipids comprised of phosphatidyl ethanolamine (1.8%) phosphatidyl choline (0.9%) lysophosphatidyl ethanolamine (1.8%) and phosphatidyl inositol (1.1%).     

Open tubular capillary electrochromatography of underivatized amino acids using Rh(III) tetrakis(phenoxyphenyl)porphyrinate as wall modifier

The separation of 17 “common” underivatized amino acids was attempted by open tubular capillary electrochromatography (OT-CEC) in fused-silica capillaries coated with Rh(III) tetrakis(phenoxyphenyl)porphyrinate (Rh(III)TPP(m-OPh)₄OAc) using sodium phosphate and Tris–phosphate buffers as background electrolytes (BGEs). The OT-CEC separation of amino acids was compared with that obtained by capillary zone electrophoresis in bare fused-silica capillaries using the same BGEs. The amino acids were not derivatized and the UV-absorption detection was set at 200 nm. Depending on the experimental conditions at least 15 amino acids were separated. The best separations were obtained in a Rh(III)TPP(m-OPh)₄OAc-coated capillary in 50 mM Tris–100 mM phosphate buffer at pH 2.25. Separation of the critical triplet Val–Ile–Leu was always at least indicated being better at higher BGE concentrations. Regarding the sensitivity of the method, lower concentration limits of detection (LODs) in the coated capillary were obtained for Thr, Gly, Tyr, and Val; the other amino acids exhibited lower LODs in the uncoated capillary. The separation of acidic amino acids was not achieved.     

Synthesis of fluorinated glutamic acid derivatives via vinylalumination

A variety of structural types of fluorinated allylic acetates, prepared by vinylalumination of fluorinated aldehydes, were reacted with the benzophenone imine of glycine tert-butyl ester to provide 4-(fluorobenzylidenyl)- and 4-(fluoroalkylidenyl) glutamic acid derivatives in 61-96% yield. The 4-(4-fluorobenzylidenyl) glutamic acid derivative was hydrolyzed to give the 4-(4-fluorobenzylidenyl)pyroglutamate and then hydrogenated to the 4-(4-fluorobenzyl)pyroglutamate. The catalytic enantioselective conjugate addition-elimination of the benzophenone imine of glycine tert-butyl ester with the fluorinated allylic acetates prepared from fluoral, pentafluorobenzaldehyde, and 2,6-difluorobenzaldehyde provided the corresponding 4-(fluoroalkylidenyl)- and 4-(fluorobenzylidenyl) glutamic acid derivatives in 42, 45 and 80% ee, respectively.     

Determination of alternative and conventional chelating agents as copper(II) complexes by capillary zone electrophoresis--the first use of didecyldimethylammonium bromide as a flow reversal reagent

A capillary zone electrophoresis (CZE) method for analyzing 11 chelating agents [β-alaninediacetic acid (β-ADA), trans-1,2-diaminocyclohexane-N,N,N′,N′-tetraacetic acid (CDTA), diethylenetriaminepentaacetic acid (DTPA), ethylenediaminetetraacetic acid (EDTA), N-(2-hydroxyethyl)ethylenediamine-N,N′,N′-triacetic acid (HEDTA), N-(2-hydroxyethyl)iminodiacetic acid (HEIDA), iminodiacetic acid (IDA), methylglycinediacetic acid (MGDA), nitrilotriacetic acid (NTA), 1,3-diaminopropane-N,N,N′,N′-tetraacetic acid (PDTA) and triethylenetetraaminehexaacetic acid (TTHA)] as negatively charged copper(II) complexes has been established. Both conventional and alternative chelating agents were included in this study, because they are used side by side in industrial applications. In this study, didecyldimethylammonium bromide (DMDDAB) was successfully used as a flow reversal reagent for the first time in an aqueous CZE method based on phosphate BGE with UV spectrophotometric detection. In addition this new flow modifier was compared to common TTAB. Method development was done using a fused silica capillary (61 cm × 50 μm i.d.). The optimized BGE was a 105 mmol L⁻¹ phosphate buffer with TTAB or DMDDAB in the concentration 0.5 mmol L⁻¹ at pH 7.1. The measurements were done with −20 kV voltage using direct UV detection at 254 nm. In both CZE methods all 11 analyte zones were properly separated (resolutions ≥2.4), and the calibrations gave excellent correlation coefficients (≥0.998; linear range tested 0.5-2.0 mmol L⁻¹). The limits of detection were ≤34 and ≤49 μmol L⁻¹ with the method of DMDDAB and TTAB, respectively. A clear benefit of both methods was the short analysis time; all 11 complexes were detected in less than 6 and 5.5 min with the methods of TTAB and DMDDAB, respectively. The two methods were tested with dishwashing detergents and paper mill wastewater samples and proved to be suitable for practical use.     

Proximate composition,amino acid and fatty acid composition of fish maws

Fish maws are commonly recommended and consumed in Asia over many centuries because it is believed to have some traditional medical properties. This study highlights and provides new information on the proximate composition, amino acid and fatty acid composition of fish maws of Cynoscion acoupa, Congresox talabonoides and Sciades proops. The results indicated that fish maws were excellent protein sources and low in fat content. The proteins in fish maws were rich in functional amino acids (FAAs) and the ratio of FAAs and total amino acids in fish maws ranged from 0.68 to 0.69. Among species, croaker C. acoupa contained the most polyunsaturated fatty acids, arachidonic acid, docosahexaenoic acid and eicosapntemacnioc acid, showing the lowest value of index of atherogenicity and index of thrombogenicity, showing the highest value of hypocholesterolemic/hypercholesterolemic ratio, which is the most desirable.