Influence of charge transfer on parameters of band structure of organic superconductor (TMTSF)2PF6

The semiempirical method SCF MO LCAO in the CNDO/S valence approximation has been used to calculate tetramethyltetraselenafulvalene dimers (TMTSF)₂. Parameters of the band structure of (TMTSF)₂ ⁺PF₆ ^– have been calculated with an accounting for charge transfer.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 28, No, 2, pp. 140–143, March–April, 1992.     

First nanoparticles of Bechgaard salts

Well-dispersed nanoparticles of the superconducting Bechgaard salts, namely (TMTSF)₂PF₆ and (TMTSF)₂ClO₄, have been electrochemically grown in organic solution in the presence of a supporting electrolyte either being an ionic liquid or a long alkyl-chains quaternary ammonium salt. Nanoparticles exhibit sizes in the 20–75 nm range. Nanoparticle powders have been characterized by infrared, Raman, visible absorption spectroscopy, and by preliminary transport measurements at room temperature.     

Kinetics and mechanism of formation of tetrachloropalladate(II) in the reactions of bis(oxalato)- and bis(malonato) palladate(II) with chloride in acid media

Summary Kinetics of formation of [PdCl₄]^2– from [Pd(ox)₂]^2– and [Pd(mal)₂]^2– has been studies in aqueous acid media in the presence of an excess of chloride ion by stopped-flow spectrophotometry. Both the complexes undergo the transformation in two well separated consecutive steps. In 0.02–0.05 M acid with 0.2 M Cl^–, Pd(AA)^2– dissociates leading to the formation of [Pd(AA)Cl₂]^2– (where AA =ox^2– or mal^2–), which in 0.1–0.6 M acid and 1 M Cl^– forms [PdCl₄]^2– in a relatively slow step. For both steps k_abs=k₀+k₂[H⁺][Cl^–]. Activation parameters corresponding to k₀ and k₂ have been determined. Results indicate that [Pd(mal)₂]^2– is much more labile to substitution than [Pd(ox)₂]^2– and for both the lability is far greater than that of [Pd(bigH)₂]²⁺ and [Pt(ox)₂]^2– reported earlier.     

Coordination chemistry of poly(1-pyrazolyl)alkanes,part IV. Copper(II) complexes of bis- and tris-(1-pyrazolyl)methane

Summary The reactions of some copper(II) salts with bis(1-pyrazolyl)methane, H₂Cbpz, bis(3,5-dimethylpyrazolyl)methane, H₂Cbdmpz, and tris(1-pyrazolyl)methane, HCtpz give the following solid complexes: CuLX₂ · nH₂O (L=H₂Cbpz, H₂Cbdmpz or HCtpz; X=Cl^–, Br^–, NO ₃ ^– , OAc^–, or 1/2 SO ₄ ^2– and n=0, 1, 3 or 5) and CuL₂X₂ · nH₂O (L=HCtpz, X= C^–, Br^–, NO ₃ ^– or ClO ₄ ^– and n=0 or 2). The complexes have been characterised by elemental analysis, visible and i.r. spectral measurements.The reactions of Cu(HCtpz)X₂ · nH₂O (X=Cl^– or Br^–) with acetylacetonate (acac^–), dialkyldithiocarbamate (S₂CNMe ₂ ^– , S₂CNEt ₂ ^– ) or poly(1-pyrazolyl)borate (H₂Bbpz^–, HBtpz^–) in aqueous solutions lead to the displacement of HCtpz and the subsequent formation of neutral [Cu(acac)₂], [Cu(S₂CNR₂)₂], [Cu(H₂Bbpz)₂] and Cu(HBtpz)₂ while the reaction with oxalate ion, C₂O ₄ ^2– yields a stable neutral solid compound, [Cu(HCtpz)(C₂O₄)].     

1, 2-Dithiolium salts

A new method for the synthesis of 1, 2-dithiolium hydrogen sulfates by the oxidation of 1, 2-dithiole-3-thiones with hydrogen peroxide in acetic acid has been developed. From 4-(p-tolyl) 1, 2-dithiolium hydrogen sulfate a series of salts containing anions of inorganic, heteroorganic, and organic acids (Cl^–, Br^–, I^–, ClO ₄ ^– , CNS^–, VO ₃ ^– , HMoOO ₄ ^– , S₂O ₃ ^2– , S₂O ₈ ^2– , Cr₂O ₇ ^2– , Fe(CN) ₆ ^3– , Fe(CN) ₆ ^4– , B(C₆H₅) ₄ ^– , F₃CCOO^–, C₆H₂(NO₂)₃O^–) has been obtained. 4-(p-tolyl)-1, 2-dithiolium salts containing the anions NO ₂ ^– , NO ₃ ^– , ClO ₃ ^– , BrO ₃ ^– , SO ₃ ^2– , SO ₄ ^2– , S₂O ₅ ^2– and Cl₃CCOO^– dissolve in water and do not precipitate in double decomposition reactions. The reactions of 4-(p-tolyl)-1, 2-dithiolium hydrogen sulfate with sodium sulfite, disulfide, and hydrogen sulfide lead to the formation of bis[4-(p-tolyl)-1, 2-dithiol-3-yl] sulfide and disulfide and the sodium salt of 4-(p-tolyl-1, 2-dithiole-3-thiol, respectively. The reaction of 4-(p-tolyl)-1, 2-dithiolium hydrogen sulfate with solutions of salts of the alkali metals containing the anions of weak acids F^–, CNO^–, HCO ₃ ^– , CO ₃ ^2– , B₄O ₇ ^2– , HAsO ₄ ^2– , PO ₄ ^3– , CH₃COO^–, ClCH₂COO^–, etc.) forms bis[4-(p-tolyl)-1, 2-dithlol-3-yl] oxide. [8, Table 3].For part I, see [1].     

Tetrakisisopropoxy tantalum(V)O,O′-alkylene dithiophosphate complexes

Summary Tetrakisisopropoxytantalum(V) alkylene dithiophosphato complexes, (G=–CMe₂CMe₂–, –CHMeCHMe–, –CH₂CMe₂CH₂– and –CH₂CEt₂CH₂–) have been prepared from equimolar ratios of tantalum(V) isopropoxide and alkylene dithiophosphoric acids in benzene. These moisture-sensitive compounds, which are soluble in common organic solvents and are monomeric, have been characterized by elemental analysis, molecular weight determinations and by their i.r. and n.m.r. spectra. An octahedral geometry is suggested in which the ligand is bidentate.     

Halogen-und Pseudohalogenkomplexe von Kobalt(II) in Nitromethan

Zusammenfassung Die neutralen Halogenide und Pseudohalogenide von Kobalt(II) sind in Nitromethan kaum dissoziiert. Bei Zusatz entsprechender Anionen zu Kobalt(II)-perchloratlösungen werden in Nitromethan folgende Koordinationsformen leicht gebildet: CoCl₂, CoCl₃ ^–, CoCl₄ ^2–, CoBr₂, CoBr₃ ^–, CoBr₄ ^2–, CoJ₂, CoJ₃ ^–, CoJ₄ ^2–, Co[N₃]₂, [Co(N₃)₄]^2–, Co[NCS]₂, [Co(NCS)₄]^2–, Co[CN]₂ [Co(CN)₄]^2– und [Co(CN)₅]^3–.

---

The neutral halides and pseudohalides of cobalt(II) are nearly undissociated in nitromethane. On addition of the appropriate anion to a solution of cobalt(II)-perchlorate in nitromethane the following coordination forms are easily produced: CoCl₂, CoCl₃ ^–, CoCl₄ ^2–, CoBr₂, CoBr₃ ^–, CoBr₄ ^2–, CoJ₂, CoJ₃ ^–, CoJ₄ ^2–, Co[N₃]₂, [Co(N₃)₄]^2–, Co[NCS]₂, [Co(NCS)₄]^2–, Co[CN]₂, [Co(CN)₄]^2– and [Co(CN)₅]^3–.

---

---

Mit 10 Abbildungen     

Deposition behaviors and patterning of TiO2 thin films on different SAMs surfaces from titanium sulfate aqueous solution

Patterning of TiO₂ thin films was successfully obtained on different self-assembled monolayers (SAMs) in aqueous solution by micro-contact printing (μCP) method. The substrates were immersed in an aqueous solution containing titanium sulfate (Ti(SO₄)₂) and hydrogen peroxide for deposition at 80 °C. The growth rates on various surfaces were as follows: sulfonic (–SO₃H) > amino (–NH₂) > methyl (–CH₃) > hydroxyl (–OH). According to the XPS results, SAMs with the terminal groups of –SO₃H and –NH₂ were favorable for the deposition. The TiO₂ film deposited on the SAM with the terminal group of –CH₃ could be easily peeled off. Clearly, TiO₂ patterns were obtained on the prepatterned surfaces of –SO₃H/–CH₃ and –NH₂/–CH₃ SAMs. The deposition mechanism might be relevant to electrostatic interaction, Stern layer, lone pair electrons and Van der Vaals forces. The TiO₂ film was anatase after annealing at 500 °C and comprised particles with an average diameter of ca. 10 nm.     

A New Predictive Equation for the Surface Tensions of Aqueous Mixed Ionic Solutions Conforming to the Linear Isopiestic Relation

The linear isopiestic relation has been used, together with the fundamental Butler equations, to establish a new simple predictive equation for the surface tensions of the mixed ionic solutions. This newly proposed equation can provide the surface tensions of multicomponent solutions using only the data of the corresponding binary subsystems of equal water activity. No binary interaction parameters are required. The predictive capability of the equation has been tested by comparing with the experimental data of the surface tensions for the systems HCl–LiCl–H₂O, HCl–NaClO₄–H₂O, HCl–CaCl₂–H₂O, HCl–SrCl₂–H₂O, HCl–BaCl₂–H₂O, LiCl–NaCl–H₂O, LiCl–KCl–H₂O, NaCl–KCl–H₂O, KNO₃–NH₄NO₃–H₂O, and LiCl–NaCl–KCl–H₂O at 298.15 K; KNO₃–NH₄Cl–H₂O, KBr–Sr(NO₃)₂–H₂O, NaNO₃–Sr(NO₃)₂–H₂O, NaNO₃ –(NH₄)₂SO₄–H₂O, KNO₃–Sr(NO₃)₂– H₂O, NH₄Cl–Sr(NO₃)₂–H₂O, NH₄Cl– (NH₄)₂SO₄–H₂O, KBr–KCl–H₂O, KBr–KCl–NH₄Cl–H₂O, KBr–KNO₃– Sr(NO₃)₂–H₂O, KBr–NH₄Cl–Sr(NO₃)₂–H₂O, KNO₃–NH₄Cl–Sr(NO₃)₂–H₂O, and NH₄Cl–(NH₄)₂SO₄–NaNO₃–H₂O at 291.15 K; and KBr–NaBr–H₂O at temperatures from 283.15 to 308.15 K. The agreement is generally quite good.     

Coordination chemistry of poly(1-pyrazolyl)alkanes Part V: Preparation and characterization of cobalt(II) complexes with bis(1-pyrazolyl)methane and bis(3-methylpyrazolyl)propane

Summary Bis(1-pyrazolyl)methane, H₂Cbpz, and bis(3-methylpyrazolyl)propane, Me₂Cbmpz, react with cobalt(II) salts to give the solid complexes: [Co(H₂Cbpz)₂X₂] ·2H₂O (X=Cl^–, Br^–, I^–, NO ₃ ^– or ClO ₄ ^– ) and [Co(Me₂-Cbmpz)X₂] (X=Cl^–, Br^–, or I^–), which were isolated and characterised by elemental analysis, i.r. and electronic spectra and conductance measurements. From spectral data, octahedral and tetrahedral structures have been proposed for the H₂Cbpz and Me₂Cbmpz complexes respectively. The molar conductance of the complexes indicates that they are non-ionic.     

Synthesis of pyridine and picolines over modified silica-alumina and ZSM-5 catalysts

In the reaction of acetaldehyde, formaldehyde and ammononia over HZSM-5 (Si/Al-280), PbZSM-5 and WZSM-5 catalysts at 420°C, 0.5 h^–1 weight hourly space velocity, the total yields of pyridine and 3-picoline obtained were 58.2, 42.8 and 78.3 wt.% based on aldehydes, respectively. In the reaction of acetaldehyde and ammonia over typical Pb–SiO₂–Al₂O₃ (20% PbO), W–SiO₂–Al₂O₃ (10% W), Pb–Cr–SiO₂–Al₂O₃ (F) and Pb–Cu–SiO₂–Al₂O₃ (E) catalysts at 420°C, 0.5 h^–1 W.H.S.V., the yields of 2- and 4-picolines obtained were 51.1, 66.1, 80.6 and 53.7 wt.%, respectively.IICT Communication No. 3421, — dedicated to Dr. A.V. Rama Rao on his 60th birthday.     

Determination of oxygen in fluoride glass by proton activation analysis

Oxygen was determined in three kinds of ZrF₄-based fluoride glass [ZrF₄–BaF₂–GdF₃–AlF₃ (ZBGA), ZrF₄–BaF₂–LaF₃–YF₃–AlF₃–LiF–NaF (ZBLYALN) and ZrF₄–BaF₂–LaF₃–YF₃–AlF₃–LiF (ZBLYAL)] used for fabricating optical fiberby¹⁸O(p, n)¹⁸F reaction without significant nuclear interference. The main long life⁹⁶Nb nuclide was produced by the⁹⁶Zr(p,n) reaction in a non-destructive analysis of ZBGA-fluoride glass and reduced by using a coincidence system with Ge(Li) and NaI(T1) detectors. Substoichiometric separation of¹⁸F was also used to determine oxygen in fluoride glass, especially in glass containing yttrium as a component element because the⁸⁹Zr produced by the⁸⁹Y(p,n) reaction is a positron emitter, the same as¹⁸F. It was confirmed that the oxygen concentration in fluoride glass was 13–2460 ppm related to the loss by scattering.     

Crystal structure of a new molecular complex of fullerene with tetramethyltetraselenafulvalene: C60·TMTSF·2CS2

A new molecular complex of fullerene with tetramethyltetraselenafulvalene (TMTSF), C₆₀·TMTSF·2CS₂, (1) was synthesized. The structure and composition of the complex were established by X-ray diffraction analysis. The crystals of C₆₀·C₁₀H₁₂Se₄·2CS₂ are monoclinic:a=15.407(2),b=12.934(2),c=12.026(2) Å β=108.39(3)°,V=2274.1(6) ų, space groupCm, Z=2,d _calc=1.929 g cm^?3,R=0.047. The crystal structure of 1 consists of layers. Layers formed by fullerene and CS₂ molecules alternate with layers of TMTSF molecules. Peculiarities of the crystal structure of 1 are the nonplanar conformation of TMTSF molecules and the absence of shortened C…C contacts between adjacent fullerenes molecules. The energy of intermolecular TMTSF…C₆₀ interactions in the crystal was estimated.     

Voltamperometric determination of uranium and plutonium in alkaline solutions

The simultaneous determination of U(VI), Pu(VI), Pu(V) in 0.5–4.0 M NaOH has been elaborated by means of classical and differential pulse voltamperometry. U(VI) is determined with a dropping mercury electrode (DME) at the half-wave potential of E_1/2=–0.89 V vs. Ag/AgCl reference electrode due to reduction to U(V). The limiting current or peak heights are proportional to uranium(VI) concentration in the range of 1.3.10^–7–3·10^–4 M U(VI). Deviation from proportionality is observed for higher concentrations due to polymerization of uranates. Pu(VI) and Pu(V) are determined with a platinum rotating electrode at E_1/2=–0.02 V due to the reaction Pu(VI)+e^–»Pu(V) and with DME at E_1/2=–1.1 V due to the reduction to Pu(III). The limiting currents of both Pu(VI) and Pu(V) are proportional to their concentrations in the range of 4·10^–6–1.2·10^–3 M Pu. The determination of U(VI), Pu(VI), Pu(V) is not interfered by the presence of the following salts: 2M NaNO₃, 2M NaNO₂, 1.5M NaAlO₂, 0.5M NaF and ions of Mo(VI), W(VI), V(V), Cu(II). The presence of CrO ₄ ^2– and FeO ₂ ^– ions disturbs the determination of U(VI) in 1–4M NaOH, however, contribution of the reaction Fe(III)+e^–»Fe(II) to uranium reduction peak can be calculated from the height of the second peak Fe(II)+2 e^–»Fe(0).     

Untersuchungen in den Systemen Thorium-Molybdän-Kohlenstoff und Uran-Molybdän-Kohlenstoff

Die Dreistoffe Thorium-Molybdän-Kohlenstoff und Uran-Molybdän-Kohlenstoff wurden mittels druckgesinterter, vakuumgeglühter sowie lichbogengeschmolzener Legierungen röntgenographisch und metallographisch untersucht und eine Aufteilung der Phasenfelder bei 1400° bzw. 1600° (900°) vorgenommen. Mit Ausnahme von U₂C₃ konnten die in den Randsystemen bekannten Phasen sowie die ternäre Kristallart UMoC₂ bestätigt werden. Im System Th–Mo–C treten die Gleichgewichte Mo–ThC, Mo₂C–ThC, Mo₂C–ThC₂ und Mo₃C₂–ThC₂ auf. Die gegenseitigen Löslichkeiten sind gering, ternäre Verbindungen werden nicht gebildet.Im System U–Mo–C treten auf der metallreichen Seite die Gleichgewichte UC–-(U, Mo) (32 At% Mo,a=4,36 Å) und UC–Mo auf, während das kohlenstoffreiche Gebiet von UMoC₂ beherrscht wird (Gleichgewichte: UMoC₂–C,–UC₂,–UC, –Mo₃C₂,–Mo₂C). Eine neuaufgefundene Kristallart der ungefähren Zusammensetzung UMo₂C₂ () hat metastabilen Charakter und zerfällt beim Schmelzen in UMoC₂ und Mo. Der gegenseitige Metallaustausch in den Carbidphasen ist gering.Die kubische Hochtemperaturform von Mo₃C₂ kann durch geringe Mengen von U und Th (<1 At%) bis Raumtemperatur im metastabilen Gleichgewicht erhalten werden.Die in den Systemen U–Mo(W)–C und Th–Mo(W)–C auftretenden Gleichgewichte werden thermodynamisch ausge-wertet und Grenzwerte für die freien Bildungsenthalpien der Verbindungen UMoC₂, UWC₂ und ThC₂ angegeben. Die Stabilität der Dicarbide des Urans und Thoriums wird diskutiert.Mit 11 Abbildungen     

Kinetic study of the reaction betweentrans-tetracyanodioxomolybdate(IV) and fluoride ions

Summary The kinetics of the reaction between [MoO₂(CN)₄]^4– and F^– have been studied in the pH range 8 to 11. The results indicated that the diprotonated form, [MoO(OH₂)(CN)₄]^2–, is the only reactive species and that the aqua-ligand is substituted by the F^– ion according to the following reaction. The k₁ and k_–1 values are 8.8(2) M^–1 s^–1 and 0.6(1)s^–1, respectively, at 15°C. A dissociative substitution process is proposed.     

Disilizidsysteme

Zusammenfassung Mit Hilfe röntgenographischer und thermoanalytischer Methoden wurden weitere Systeme von Disiliziden der 4., 5. und 6. Gruppe untersucht.Interessante Befunde ergeben sich bei: Cr(Ta)Si₂–TiSi₂–Mo(W)Si₂, TiSi₂–TaSi₂–CrSi₂ und CrSi₂–TaSi₂–MoSi₂. Zwischen Cr(Ta)Si₂ und (Ti, Mo)Si₂ bzw. (Ti, W) Si₂ mitC 40-Typ besteht ein lückenloser Übergang. Außerdem wird die Mischungslücke im System CrSi₂–TaSi₂ durch TiSi₂ bzw. MoSi₂ geschlossen.Mit 23 Abbildungen     

Surface redox polymerized SPEEK–MO2–PANI (M = Si, Zr and Ti) composite polyelectrolyte membranes impervious to methanol

We reported sulfonated poly(ether ether ketone) (SPEEK, 61% degree of sulfonation)–metal oxides (MO₂:SiO₂, TiO₂ and ZrO₂)–polyaniline composite membranes. Metal oxides were incorporated into the swelled SPEEK membrane by sol–gel method and cured by thermal treatment. SPEEK–metal oxide membranes surfaces were modified with polyaniline (PANI) by a redox polymerization process. It was observed that water retention capacity of membrane was increased and methanol permeability was reduced due to synergetic effect of metal oxides and surface modification with polyaniline. These composite membranes showed extremely low methanol permeability (1.9–1.3 × 10⁻⁷ cm² s⁻¹), which was lower than till reported values either for SPEEK–metal oxide or SPEEK/PANI membranes. Relatively high selectivity parameter (SP) values at 343 K of these membranes, especially S–SiO₂–PANI and S–TiO₂–PANI, indicated their great advantages over Nafion117 (N117) membrane for targeting on moderate temperature applications due to the synergetic effect of MO₂ and PANI in SPEEK matrix. S–TiO₂–PANI and N117 showed comparable cell performance in direct methanol fuel cell (DMFC).     

Polynuclear Nickel(II) and Cobalt(II) Complexonates with Nitrilotrimethylenephosphonic Acid

Complexation in the Co(II)–H₆X–H₂O, Ni(II)–H₆X–H₂O, and Co(II)–Ni(II)–H₆X–H₂O systems (H₆X is nitrilotrimethylenephosphonic acid) was studied by spectrophotometry. The formation of binuclear complexonates Ni₂H₂X · 7H₂O, Co₂H₂X · 5H₂O, and NiCoH₂X · 6H₂O was demonstrated. These compounds were isolated from the solution, their composition was determined, the thermal stability was studied, and the kinetic parameters of dehydration were calculated.     

Interaction of iron carbonyls with Lewis bases

The interaction of iron carbonyls Fe _n (CO) _m (wheren = 1,m = 5;n = 2,m = 9;n = 3,m = 12) with anionic Lewis bases (H^–, F^–, Cl^–, Br^– , I^–, CN^–, SCN^–, N₃ ^–, MeSO₃ ^–, MeCO₂ ^–, CF₃CO₂ ^–, S₂ ^–, CO₃ ^2–, and SO₄ ^2–) passes through two-stage redox-disproportionation. The first stage is the formation of an iron carbonyl-base complex, [Fe _n (CO) _m–1C(O)L]^–, and the second is a single-electron reduction of this complex by another molecule of the initial iron carbonyl, giving rise to Fe(l) and Fe(–l) derivatives.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 248–249, January, 1996.