Aggregation Behavior of Pluronic-L64 in Presence of Sodium Dodecyl Sulphate in Water

The effect of sodium dodecyl sulfate (SDS) on the micellization and aggregation behavior of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic L64: EO₁₃ PO₃₀ EO₁₃) have been investigated by various techniques like, cloud point, viscosity, isothermal titration calorimetry (ITC), differential scanning calorimetry (DSC), fluorescence spectroscopy, room temperature phosphorescence (RTP), and small angle neutron scattering (SANS). Addition of SDS in L64 solutions shows mark alteration of different properties. We observed synergistic interaction between SDS and Pluronic L64. The changes in the critical micelle concentration (CMC), critical micelle temperature (CMT), cloud point (CP), micelle size, and shape has been correlated and reported in terms of structure dynamics and mechanics. The ITC titrations have been used to explore the different stages of binding and interactions of SDS with L64. The enthalpies of aggregation for copolymer-SDS aggregates binding, organizational change of bound aggregates, and the threshold concentrations of SDS in the presence of copolymer were estimated directly from ITC titration curves. The effect of temperature on enthalpy values has been reported in terms of different aggregation state. Fluorescence and RTP for L64 were used to investigate the change in micellar environment on the addition of SDS at different temperature. Appearance and shifting of SANS peaks have been used to monitor the size and inter micellar interaction on addition of SDS in L64 solution. Cloud point and viscosity elaborate the penetration of SDS molecule in L64 micelle and hence changing the micellar architect.     

Water distributions in polystyrene-block-poly[styrene-g-poly(ethylene oxide)] block grafted copolymer system in aqueous solutions revealed by contrast variation small angle neutron scattering study

We develop an experimental approach to analyze the water distribution around a core-shell micelle formed by polystyrene-block-poly[styrene-g-poly(ethylene oxide (PEO)] block copolymers in aqueous media at a fixed polymeric concentration of 10 mg/ml through contrast variation small angle neutron scattering (SANS) study. Through varying the D(2)O/H(2)O ratio, the scattering contributions from the water molecules and the micellar constituent components can be determined. Based on the commonly used core-shell model, a theoretical coherent scattering cross section incorporating the effect of water penetration is developed and used to analyze the SANS I(Q). We have successfully quantified the intramicellar water distribution and found that the overall micellar hydration level increases with the increase in the molecular weight of hydrophilic PEO side chains. Our work presents a practical experimental means for evaluating the intramacromolecular solvent distributions of general soft matter systems.     

A small-angle neutron scattering study of sodium dodecyl sulfate-poly(propylene oxide) methacrylate mixed micelles

Mixed micelle of protonated or deuterated sodium dodecyl sulfate (SDS and SDSd25, respectively) and poly(propylene oxide) methacrylate (PPOMA) are studied by small-angle neutron scattering (SANS). In all the cases the scattering curves exhibit a peak whose position changes with the composition of the system. The main parameters which characterize mixed micelles, i.e., aggregation numbers of SDS and PPOMA, geometrical dimensions of the micelles and degree of ionisation are evaluated from the analysis of the SANS curves. The position q(max) of the correlation peak can be related to the average aggregation numbers of SDS-PPOMA and SDSd25-PPOMA mixed micelles. It is found that the aggregation number of SDS decreases upon increasing the weight ratio PPOMA/SDS (or SDSd25). The isotopic combination, which uses the "contrast effect" between the two micellar systems, has allowed us to determine the mixed micelle composition. Finally, the SANS curves were adjusted using the RMSA for the structure factor S(q) of charged spherical particles and the form factor P(q) of spherical core-shell particle. This analysis confirms the particular core-shell structure of the SDS-PPOMA mixed micelle, i.e., a SDS "core" micelle surrounded by the shell formed by PPOMA macromonomers. The structural parameters of mixed micelles obtained from the analysis of the SANS data are in good agreement with those determined previously by conductimetry and fluorescence studies.     

超声分散对单壁碳纳米管分离的影响

利用凝胶柱色谱技术, 研究者们通过两步或多步淋洗的方法实现了不同导电属性或电子结构单壁碳纳米管(SWCNTs)的分离, 并提出其分离机制主要是由不同导电属性和电子结构的SWCNTs 与凝胶填料之间作用力的差异所导致的. 基于凝胶柱色谱分离技术, 本文重点考察了超声时间对单壁碳纳米管单分散以及金属型/半导体型SWCNTs 分离的影响. 在一定的低超声功率下, 适当增加超声时间有利于SWCNTs 在十二烷基硫酸钠(SDS)溶液中的单分散. 紫外-可见-近红外(UV-Vis-NIR)吸收光谱、拉曼(Raman)光谱和荧光(PL)光谱表征结果表明, 2 h的超声条件是获得高纯度的金属型以及不同直径分布的半导体型SWCNTs 的最优条件. 我们认为不同超声时间对SWCNTs 分离的影响主要是改变了SWCNTs 的单分散性和长度, 调制了不同SWCNTs 与凝胶之间作用力的差异, 从而导致了不同SWCNTs分离结果.     

Investigation of the local composition enhancement and related dynamics in supercritical CO2-cosolvent mixtures via computer simulation: the case of ethanol in CO2

The supercritical mixture ethanol-carbon dioxide (EtOH-CO2) with mole fraction of ethanol X(EtOH) congruent with 0.1 was investigated at 348 K, by employing the molecular dynamics simulation technique in the canonical ensemble. The local intermolecular structure of the fluid was studied in terms of the calculated appropriate pair radial distribution functions. The estimated average local coordination numbers and mole fractions around the species in the mixture reveal the existence of local composition enhancement of ethanol around the ethanol molecules. This finding indicates the nonideal mixing behavior of the mixture due to the existence of aggregation between the ethanol molecules. Furthermore, the local environment redistribution dynamics have been explored by analyzing the time correlation functions (TCFs) of the total local coordination number (solvent, cosolvent) around the cosolvent molecules in appropriate parts. The analysis of these total TCFs in the auto-(solvent-solvent, cosolvent-cosolvent) and cross-(solvent-cosolvent, cosolvent-solvent) TCFs has shown that the time dependent redistribution process of the first solvation shell of ethanol is mainly determined by the redistribution of the CO2 solvent molecules. These results might be explained on the basis of the CO2-CO2 and EtOH-CO2 intermolecular forces, which are sufficiently weaker in comparison to the EtOH-EtOH hydrogen bonding interactions, creating in this way a significantly faster redistribution of the CO2 molecules in comparison with EtOH. Finally, the self-diffusion coefficients and the single reorientational dynamics of both the cosolvent and solvent species in the mixture have been predicted and discussed in relationship with the local environment around the species, which in the case of the EtOH molecules seem to be strongly affected.     

Aggregation of sodium 1-(n-alkyl)naphthalene-4-sulfonates in aqueous solution: micellization and microenvironment characteristics

In aqueous solution, the micellization and microenvironment characteristics of the micelle assemblies of three anionic surfactants, sodium 1-(n-alkyl)naphthalene-4-sulfonates (SANS), have been investigated by steady-state fluorescence and time-resolved fluorescence decay techniques using pyrene, Ru(bpy)3(2+), and 1,6-diphenyl-1,3,5-hexatriene as fluorescence probes. The critical micelle concentrations (cmc's), effective carbon atom numbers (neff's), hydrophilic-lipophilic balances (HLBs), mean micelle aggregation numbers, micropolarities, and microviscosities of these surfactant micelles have been determined. The logarithmic cmc of the alkylnaphthalene sulfonates decreases linearly with an increase in the neff. The logarithmic aggregation number of the alkylnaphthalene sulfonates increases linearly with an increase in the neff. However, in contrast to the alkylsufonates and the alkylbenzene sulfonates, the aggregation for these alkylnaphthalene sulfonate molecules is less sensitive to the increase in the neff. The micropolarity of these alkylnaphthalene sulfonate micelles is less sensitive to the increase in the alkyl chain length and is lower than that of sodium dodecyl sulfate (SDS). The microviscosity of these alkylnaphthalene sulfonate micelles increases with an increase in the alkyl chain length and is lower than those of nonionic surfactants and zwitterionic surfactants. These results suggest that naphthyl rings have a notable effect on the micellization of SANS.     

Structure of sodium alkyl sulfate micelles

Apparent and partial molar volumes of aggregated sodium octyl-, decyl-, dodecyl-, and tetradecyl sulfate molecules have been determined rigorously in terms of the pseudophase separation model. Mass density inside the micellar core—a basic thermodynamic parameter in the research of micelles by nuclear techniques—has been derived from the partial molar volumes.Micellar aggregation numbers of the same surfactants, obtained from small-angle neutron scattering [SANS] by systematically varying the surfactant concentration and solution temperature are published. A survey is given of the physical models and evaluation algorithms applied in SANS, together with a critical comparison of available experimental data published by various research teams.By utilizing a new least-squares fitting algorithm based on a microscopic diffusion model, the formation and annihilation parameters of ortho-positronium Co-Ps) in the micellar pseudophase and in the aqueous solvent, as well as the o-Ps diffusion coefficient in the solvent are deduced by evaluating conventionally measured positron lifetime spectra. From the pickoff annihilation rate of o-Ps in micelles the surface tension of the micellar core around the solubilization site of o-Ps is calculated. SANS results are utilized to determine the diffusion coefficient of o-Ps in normal and in 99.85% heavy water as a function of temperature. A definite isotopic effect in the two solvents can be seen from the results obtained for the diffusion coefficient and its activation energy. The Arrhenius plot of o-Ps diffusion coefficients indicates that o-Ps diffuses in both media without tunnelling.     

Physical properties of aqueous solutions of a thermo-responsive neutral copolymer and an anionic surfactant: turbidity and small-angle neutron scattering studies

Aqueous mixtures of the anionic sodium dodecyl sulfate (SDS) surfactant and thermo-responsive poly(N-vinylcaprolactam) chains grafted with omega-methoxy poly(ethylene oxide) undecyl alpha-methacrylate (PVCL-g-C11EO42) have been characterized using turbidimetry and small-angle neutron scattering (SANS). Turbidity measurements show that the addition of SDS to a dilute aqueous copolymer solution (1.0 wt %) induces an increase of the cloud point (CP) value and a decrease of the turbidity at high temperatures. In parallel, SANS results show a decrease of both the average distance between chains and the global size of the objects in solution at high temperatures as the SDS concentration is increased. Combination of these findings reveals that the presence of SDS in the PVCL-g-C11EO42 solutions (1.0 wt %) promotes the formation of smaller aggregates and, consequently, leads to a more homogeneous distribution of the chains in solution upon heating of the mixtures. Moreover, the SANS data results show that the internal structure of the formed aggregates becomes more swollen as the SDS concentration increases. On the other hand, the addition of moderate amounts of SDS (up to 4 mm) to a semidilute copolymer solution (5.0 wt %) gives rise to a more pronounced aggregation as the temperature rises; turbidity and SANS studies reveal in this case a decrease of the CP value and an increase of the scattered intensity at low q. The overall picture that emerges from this study is that the degree of aggregation can be accurately tuned by varying parameters such as the temperature, level of surfactant addition, and polymer concentration.     

Effect of ethanol on the interaction between poly(vinylpyrrolidone) and sodium dodecyl sulfate

The effect of ethanol on the interaction between the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic polymer poly(vinylpyrrolidone) (PVP) has been investigated using a range of techniques including surface tension, fluorescence, electron paramagnetic resonance (EPR), small-angle neutron scattering (SANS), and viscosity. Surface tension and fluorescence studies show that the critical micelle concentration (cmc) of the surfactant decreases to a minimum value around 15 wt % ethanol; that is, it follows the cosurfactant effect. However, in the presence of PVP, the onset of the interaction, denoted cmc(1), between the surfactant and the polymer is considerably less dependent on ethanol concentration. The saturation point, cmc(2), however, reflects the behavior of the cmc in that it decreases upon addition of ethanol. This results in a decrease in the amount of surfactant bound to the polymer [C(bound) = cmc(2) - cmc] at saturation. The viscosity of simple PVP solutions depends on ethanol concentration, but since SANS studies show that ethanol has no effect on the polymer conformation, the changes observed in the viscosity reflect the viscosity of the background solvent. There are significant increases in bulk viscosity when the surfactant is added, and these have been correlated with the polymer conformation extracted from an analysis of the SANS data and with the amount of polymer adsorbed at the micelle surface. Competition between ethanol and PVP to occupy the surfactant headgroup region exists; at low ethanol concentration, the PVP displaces the ethanol and the PVP/SDS complex resembles that formed in the absence of the ethanol. At higher ethanol contents, the polymer does not bind to the ethanol-rich micelle surface.     

SANS and UV-vis spectroscopy studies of resultant structure from lysozyme adsorption on silica nanoparticles

The interaction of lysozyme protein (M.W. 14.7 kD) with two sizes of silica nanoparticles (16 and 25 nm) has been examined in aqueous solution using UV-vis spectroscopy and small-angle neutron scattering (SANS). The measurements were performed on fixed concentration (1 wt %) of nanoparticles and varying concentration of protein in the range 0 to 2 wt %. The adsorption isotherm as obtained using UV-vis spectroscopy suggests strong interaction of the two components and shows an exponential behavior. The saturation values of adsorption are found to be around 90 and 270 protein molecules per particle for 16 and 25 nm sized nanoparticles, respectively. The adsorption of protein on nanoparticles leads to the aggregation of particles and these structures have been studied by SANS. The aggregates are characterized by fractal structure coexisting with unaggregated particles at low protein concentrations and free proteins at higher protein concentrations. Further, contrast variation SANS measurements have been carried out to differentiate the adsorbed and free protein in these systems.     

Controlling aggregation of nonionic surfactants using mixed glycol media

The extent of aggregation of nonionic surfactants can be controlled by the composition of mixed solvents with two miscible glycols, ethylene glycol (EG)/propylene glycol (PG). Three nonionic surfactants bearing a common E8 ethoxylated headgroup, but with variations in the hydrocarbon chain, have been investigated: octaethylene monododecyl ether (C12E8), octaethylene monotetradecyl ether (C14E8), and octaethylene monohexadecyl ether (C16E8). The hydrogen-bonding solvents were EG/PG mixtures at different PG levels, defined in terms of the concentration (mol %) of PG. Aggregation was investigated using small-angle neutron scattering (SANS) with h-CiE8 surfactants, at 10 and 5 wt %, in deuterated glycol solvents to improve contrast. Increasing PG concentration (mol %) in the background EG/PG solvent leads to a consistent decrease in the SANS intensity, until in pure d-PG only very weak scattering is observed. These SANS data were analyzed using cylinder or ellipsoidal form factors for the EG-rich and PG-rich systems, respectively, hence demonstrating an aggregate shape change as a function of solvent composition. The results show that aggregation of nonionic surfactants occurs in glycol solvents and that the EG:PG ratio may be used as an effective means to switch aggregation "on" or "off", as required.     

Self-assembly of hydrophobin and hydrophobin/surfactant mixtures in aqueous solution

The self-assembly of the protein hydrophobin, HFBII, and its self-assembly with cationic, anionic, and nonionic surfactants hexadecylterimethyl ammonium bromide, CTAB, sodium dodecyl sulfate, SDS, and hexaethylene monododecyl ether, C(12)E(6), in aqueous solution have been studied by small-angle neutron scattering, SANS. HFBII self-assembles in solution as small globular aggregates, consistent with the formation of trimers or tetramers. Its self-assembly is not substantially affected by the pH or electrolytes. In the presence of CTAB, SDS, or C(12)E(6), HFBII/surfactant complexes are formed. The structure of the HFBII/surfactant complexes has been identified using contrast variation and is in the form of HFBII molecules bound to the outer surface of globular surfactant micelles. The binding of HFBII decreases the surfactant micelle aggregation number for increasing HFBII concentration in solution, and the number of hydrophobin molecules bound/micelle increases.     

十二烷基硫酸钠对两性咪唑类离子液体表面活性剂1-磺丙基-3-十二烷基咪唑内盐界面聚集行为的影响

利用界面扩张流变技术,研究了两性咪唑类离子液体表面活性剂1-磺丙基-3-十二烷基咪唑内盐(C₁₂imSP)的界面聚集行为,探讨传统表面活性剂十二烷基硫酸钠(SDS)对C₁₂imSP界面聚集行为的影响机制。 结果表明,少量SDS的加入可以填补界面上疏松的C₁₂imSP分子间的空位,界面上形成表面活性剂混合吸附膜,界面张力显著降低;提高SDS的浓度,其分子从体相向界面层的扩散交换占优势,界面层分子逐渐达到饱和吸附,此后体系中有混合胶束形成。 体相胶束中富集的SDS分子对C₁₂imSP分子的“收纳”作用及进一步的“挽留”作用,加之C₁₂imSP分子本身相对较大的空间位阻效应导致界面上的C₁₂imSP分子一旦通过扩散作用被交换至体相,其很难再回复到表面层,即界面膜以SDS分子为主。 通过调节体系中SDS的含量,可以实现对混合体系SDS/C₁₂imSP/NaCl(0.1 mol/L)界面聚集行为的调控,进而实现对界面膜性质的调控。     

SANS studies of the effects of surfactant head group on aggregation properties in water/glycol and pure glycol systems

Aggregation in mixed water-glycol and pure glycol solvents has been investigated with four related surfactants, bearing common C12 tails: anionic, sodium dodecylsulfate (SDS); cationic, dodecyltrimethylammonium bromide (C12TAB); zwitterionic C12-amidopropyldimethylamine betaine (betaine) and nonionic, octaethyleneglycol monododecyl ether (C12E8). The solvent media were water, water/ethylene glycol, and water/propylene glycol mixtures, as well as pure ethylene glycol (EG) and propylene glycol (PG), spanning relative dielectrics epsilon(r) from 79 to 30. Results from small-angle neutron scattering (SANS) experiments, employing deuterated solvents, were consistent with the presence of ellipsoidal, or cylindrical micelles, depending on solvent and surfactant type. In pure EG and PG solvents the ionic and zwitterionic surfactants exhibit only weak aggregation, with much smaller micelles than normally found in water. However, interestingly, pure EG is identified as a solvent in which nonionic C12E8 aggregates strongly, mirroring the behavior in water. In contrast when the solvent is changed to PG (epsilonr=30) aggregation of C12E8 is only minimal. Hence, aggregation is shown to be strongly dependent on surfactant type and identity of the glycol solvent.     

Photosensitive function of encapsulated dye in carbon nanotubes

Single-wall carbon nanotubes (SWCNTs) exhibit resonant absorption localized in specific spectral regions. To expand the light spectrum that can be utilized by SWCNTs, we have encapsulated squarylium dye into SWCNTs and clarified its microscopic structure and photosensitizing function. X-ray diffraction and polarization-resolved optical absorption measurements revealed that the encapsulated dye molecules are located at an off center position inside the tubes and aligned to the nanotube axis. Efficient energy transfer from the encapsulated dye to SWCNTs was clearly observed in the photoluminescence spectra. Enhancement of transient absorption saturation in the S1 state of the semiconducting SWCNTs was detected after the photoexcitation of the encapsulated dye, which indicates that ultrafast (<190 fs) energy transfer occurred from the dye to the SWCNTs.     

Dispersion and orientation of single-walled carbon nanotubes in a chromonic liquid crystal

A post-synthesis alignment of individual single-walled carbon nanotubes (SWCNTs) is desirable for translating their unique anisotropic properties to a macroscopic scale. Here, we demonstrate excellent dispersion, orientation and concomitant-polarised photoluminescence of SWCNTs in a nematic chromonic liquid crystal. The methods to obtain stable suspension are described, and order parameters of the liquid crystal matrix and of the nanotubes are measured independently.     

Liquid structure and preferential solvation of metal ions in solvent mixtures of N,N-dimethylformamide and N-methylformamide

Raman spectra of aprotic N,N-dimethylformamide (DMF) and protic N-methylformamide (NMF) mixtures containing manganese(II), nickel(II), and zinc(II) perchlorate were obtained, and the individual solvation numbers around the metal ions were determined over the whole range of solvent compositions. Variation profiles of the individual solvation numbers with solvent composition showed no significant difference among the metal systems examined. In all of these metal systems, no preferential solvation occurs in mixtures with DMF mole fraction of x(DMF) < 0.5, whereas DMF preferentially solvates the metal ions at x(DMF) > 0.5. The liquid structure of the mixtures was also studied by means of small-angle neutron scattering (SANS) and low-frequency Raman spectroscopy. SANS experiments demonstrate that DMF molecules do not appreciably self-aggregate in the mixtures over the whole range of solvent composition. Low-frequency Raman spectroscopy suggests that DMF molecules are extensively hydrogen-bonded with NMF in NMF-rich mixtures, whereas NMF molecules extensively self-aggregate in DMF-rich mixtures, although the liquid structure in neat NMF is partly ruptured. The bulk solvent structure in the mixtures thus varies with solvent composition, which plays a decisive role in developing the varying profiles of the individual solvation numbers of metal ions in the solvent mixtures.     

Direct measurement of the interactions of amide solvents with single-walled carbon nanotubes using isothermal titration calorimetry

The interaction enthalpy of amide solvents with single-walled carbon nanotube (SWCNT) dispersions is measured using isothermal titration calorimetry (ITC). N,N-Dimethyl-formamide (DMF) and N-methyl-2-pyrilidone (NMP) were used to make dispersions of highly purified (6,5) SWCNTs. Using isothermal titration calorimetry, the ΔH and K(A) terms related to the solvent-nanotube interactions were measured, and ΔG and ΔS of the interaction were determined. It was found that the interaction enthalpy of NMP with SWCNTs dispersed in DMF was exothermic. The addition of a second solvent into a NMP or DMF dispersion produced spontaneous exfoliation of SWCNT bundles as the solvent properties became more favorable. During the titration, a positive change in interaction entropy within the dispersed system due to the unbundling of SWCNTs was measured. From blank titrations of pure DMF into pure NMP and the reverse, dilution enthalpies were also calculated and compared to the literature, along with the corresponding enthalpic interaction coefficients, h(xx) and h(xxx). From our results, ITC appears to be a viable technique for measuring the interaction of solvent molecules with the surface of SWCNTs and for measuring the effect of mixed solvent properties on SWCNT dispersions.     

Structure of mixed anionic/nonionic surfactant micelles: experimental observations relating to the role of headgroup electrostatic and steric effects and the effects of added electrolyte

The structures of the mixed anionic/nonionic surfactant micelles of SDS/C12E6 and SDS/C12E8 have been measured by small angle neutron scattering (SANS). The variations in the micelle aggregation number and surface charge with composition, measured in D2O and in dilute electrolyte, 0.01 and 0.05 M NaCl, provide data on the relative roles of the surfactant headgroup steric and electrostatic interactions and their contributions to the free energy of micellization. For the SDS/C12E8 mixture, solutions increasingly rich in C12E8 show a modest micellar growth and an increase in the surface charge. The changes with increasing electrolyte concentration are similarly modest. In contrast, for the SDS/C12E6 mixture, solutions rich in C12E6 show a more significant increase in aggregation number. Furthermore, electrolyte has a more substantial effect on the aggregation for the nonionic (C12E6) rich mixtures. The experimental results are discussed in the context of estimates of the steric and electrostatic contributions to the free energy of micellization, calculated from the molecular thermodynamic approach. The variation in micelle surface charge is discussed in the context of the "dressed micelle" theory for micelle ionization, and other related data.     

Multistimuli‐Responsive Luminescence Switching of Pyrazine Derivative Based Donor–Acceptor–Donor Luminophores

Three symmetrical donor–acceptor–donor (D–A–D) luminophores ( C1 , C2 , and C3 ) with pyrazine derivatives as electron‐withdrawing groups have been developed for multistimuli‐responsive luminescence switching. For comparison, reference compounds R1 and R2 without the pyrazine moiety have also been synthesized. Intramolecular charge transfer (ICT) interactions can be found for all D–A–D luminophores owing to the electron‐withdrawing properties of the two imine nitrogen atoms in the pyrazine ring and the electron‐donating properties of the other two amine nitrogen atoms in the two triphenylamine units. Moreover, luminophores C1 , C2 , and C3 exhibit “on–off–on” luminescence switching properties in mixtures of water/tetrahydrofuran with increasing water content, which is different from the “on–off” switching for typical aggregation‐caused quenching (ACQ) materials and “off–on” switching for traditional aggregation‐induced emission (AIE) materials. Additionally, upon grinding the pristine samples, luminophores C1 , C2 , and C3 display bathochromically shifted photoluminescence maxima that can be recovered by either solvent fuming or thermal annealing treatments. The piezofluorochromic (PFC) properties are more pronounced than those for reference compounds R1 and R2 , which indicates that D–A molecules have the ability to amplify the PFC effect by tuning the ICT interactions upon tiny structural changes under pressure. Furthermore, the target luminophores demonstrate acid‐responsive photoluminescence spectra that can be recovered in either basic or ambient environments. These results suggest that D–A complexes are potential candidates for multistimuli‐responsive luminescence switching because their ICT profiles can be facilely tuned with tiny external stimuli.