质子化水团簇对乙炔溶剂化作用的结构与红外光谱

利用团簇模型研究了质子化水团簇对乙炔的溶剂化作用. H⁺(C₂H₂)(H₂O)_n (n=1~5)的量子化学计算结果表明,水分子倾向与乙炔的π电子形成新型OH…π氢键作用,并且乙炔的第一溶剂层需要4个水分子来完成. 模拟的红外光谱揭示了OH…π氢键作用后的OH伸缩振动是研究乙炔与水溶剂化过程的灵敏探针. 这些红外光谱可以用红外光解离光谱实验方法测得,将为理解OH…π氢键作用以及质子化水团簇如何溶剂化乙炔提供有力的科学数据.     

ConCm±(n=1-5; m=1,2)团簇的密度泛函理论研究

本文采用基于自旋极化的密度泛函理论系统研究了Co_nC_m^± (n=1-5; m=1,2)团簇的几何结构和电子结构特性. 将Co_nC^± (n=2-5)团簇中的一个Co替换为C原子, 个体的基态几何结构发生明显变化; 在Co_nC₂^± (n=1-5)团簇的生长序列中, 发现从n=3开始团簇中的两个C原子有彼此分离分布的趋势, 我们分析, 这是Co金属能够维持单壁碳纳米管(SCNTs)保持开口生长, 成为非常有效的一种催化剂的重要原因. 同时, 将Co_nC^± (n=2-5)团簇中添加一个Co原子后系统的总磁矩出现大幅下降的趋势, 但仍保持奇偶交替的规律. 通过比较中性及带电的Co_nC以及Co_nC₂ (n=1-5)团簇的碎裂能, 本工作发现: 由实验获取的SCNTs应均为带正电的体系, 这一结论与已有的实验模型拟合得很好.     

自旋为1/2的XY模型亚铁磁棱型链的物性和有序-无序竞争

利用不变本征算符法, 计算低温下自旋为1/2的XY模型一维亚铁磁棱型链系统的元激发谱, 讨论在此系统中不同的特殊情形下的元激发能量, 从而给出体系的三个临界磁场强度的解析解H_C1, H_C2, H_peak. 分析不同外磁场下 体系的磁化强度随温度的变化规律, 发现三个临界磁场强度的解析解H_C1, H_C2, H_peak是正确的, 并从三个元激发对磁化强度的贡献进行了说明. 低温下磁化强度随外磁场的变化呈现1/3磁化平台. 体系的磁化率随温度或者外磁场的变化都出现了双峰现象. 这说明双峰源于二聚体分子内电子自旋平行排列的铁磁交换作 用能和二聚体与单基体分子间电子自旋反平行排列的反铁磁交换作用能, 热无序能, 外磁场强度相关的自旋磁矩势能之间的竞争.     

Langmuir-Blodgett膜摩擦分子动力学模拟和机理研究

采用分子动力学方法,模拟了在两块石英基板上由脂肪酸(C₁₅H₃₁COOH)组成的单层Langmuir-Blodgett (LB)膜间的摩擦特性,探究了超薄膜在滑动过程中的摩擦和结构机理.得出对于单层LB膜在滑动过程中,在速度小于60m/s时,随着速度的增大,其剪切压增大;在速度大于60 m/s时,剪切压随速度的增加而减小.其链的倾斜角随着滑动速度的增加而减小.单层膜内的分子之间以氢键方式形成了较大的分子簇,由此导致了剪切压呈现较长的周期性,但在单层膜之间无氢键形 关键词： 分子动力学模拟 朗缪尔布洛杰特膜 纳米摩擦 氢键     

机械-化学方法在硅(100)表面制备芳香烃重氮盐单层膜

利用机械-化学方法同时实现硅表面的图形化和功能化. 在芳香烃重氮盐(C₆H₅N₂BF₄)中用金刚石刀具刻划单晶硅(100),使单晶硅表面的Si-O键断裂,形成硅的自由基,进而它们与溶液中含有的有机分子共价结合以形成自组装单层膜. 用原子力显微镜对自组装前后的表面形貌进行表征,用飞行时间二次离子质谱和红外光谱对自组装单层膜进行检测和分析,通过确认C₆H₅离子的存在证明自组装单层     

杂双子咪唑表面活性剂的合成及其表面性能

合成了一系列以两个亚甲基为联接基的杂双子咪唑表面活性剂([C_m-2-C_nim]Br_{2, m, n}=8, 10, 12, 14, 16; m≠n). 用氢谱和质谱对其结构进行了表征. 探索了物料比、反应温度和时间对反应产率的影响. 对合成的杂双子咪唑表面活性剂的表面活性进行了研究,讨论了分子结构的不对称程度对表面活性的影响.     

Al2O3Hx(x=1—3)分子团簇的结构与光谱研究

用密度泛函理论(DFT)的B3lyp方法在6-311++g(d,p)水平上对Al₂O₃H_x(x=1—3)分子的几何构型, 电子结构, 振动频率等性质进行了系统研究. 并给出了它们可能基态结构的总能量(E_T), 零点能(E_z), 摩尔热容(C_v), 标准熵(S), 原子化能(ΔE_m), 垂直电离能(IP)及垂直电子亲和能(E_A). Al₂O₃H和Al₂O₃H₂分子可能的基态的几何构型都为平面结构. Al₂O₃H₃的两个可能为基态的几何构型都是在立体Al₂O₃(D_3h)的几何结构基础上加三个氢原子构成. 这三个分子的能量最低结构为Al₂O₃H(²A′)C_s, Al₂O₃H₂(¹A′) C_s, Al₂O₃H₃ (²A) C₁.     

高分辨率初始光电子能谱由真空紫外激光速度——映射图像的方法

通过采用真空紫外(VUV)激光速度-地图成像-TPE(真空紫外VMI-TPE)方法获得了高分辨率初始光电子(TPE)氯苯(C₆H₅Cl(X¹A₁))的光谱,炔丙基自由基(C₃H₃(X²B₁))和烯丙基(C₃H₅(X²A₁)). 观察到的真空紫外VMI-TPE方法的光电子能量分辨率在1~2 cm^-1,可以和在真空紫外激光脉冲场电离光电子(VUV-PFI-PE)的测量媲美. 类似真空紫外PFI-PE测量,真空紫外VMI-光电子(真空紫外VMI-PE)和真空紫外VMI-TPE测量能量分辨率依赖于直流电场在光电离区加速电子. C₆H₅Cl和C₃H₃的电离初始值的降低为F的函数表示Stark偏移校正为VUV-VMI-TPE测量由-3.1√F管辖,这是半经典预测值-6.1√F的一半. 我们还测量C₆H₅Cl和C₃H₅的真空紫外光能量的真空紫外VMI-PE谱接近其电离初始值. 在VUV-VMI-PE测量中观察到的C₃H₅⁺阳离子振动谱和振动级数,nv₇⁺(n=0~3). 真空紫外VMI-TPE可以实现更高的实验灵敏度和类似真空紫外PFI-PE测量的能量分辨率,使真空紫外VMI-TPE法成为高分辨率真空紫外PFI-PE测量一个很好的替代.     

态|Ψn(2)>q的广义非线性等阶N次方H压缩效应

构造了一种新型的多模叠加态|Ψ_n⁽²⁾>_q=C_n^(R)|{-iZ_j^*}>_q+C_n⁽⁰⁾|{O_j}>_q;并首次详细地研究了此量子态的等阶N次方H压缩特性.大量的计算和分析表明:态|Ψ_n⁽²⁾>_q是一种多模典型的非经典光场;还发现了"相似压缩"等现象.     

三明治结构Tan(B3N3H6)n+1 团簇的磁性和量子输运性质

利用密度泛函理论和非平衡格林函数方法, 本文对小尺寸团簇Ta_n(B₃N₃H₆)_n+1 (n ≤ 4)的磁性和量子输运性质进行了系统的研究. 计算结果表明, 此类体系采用三明治结构作为其基态并且具有较高的稳定性. 体系的磁矩随团簇尺寸的增大而线性增大. 当把Ta_n(B₃N₃H₆)_n+1团簇耦合到Au电极上时, 形成的Au-Ta_n(B₃N₃H₆)_n+1-Au体系在有限偏压下展示出了较强的自旋过滤能力, 因而可以被看做是一类新型的低维自旋过滤器.     

纳米摩擦中极性有机分子超薄膜的结构、对称性及能量机理

采用分子动力学方法, 模拟了由脂肪酸C_nH_2n+1COOH和C₁₇H₃₅COOH (n=12,13,14,15,16,17) 按1:1比例组成的7种混合单层Langmuir-Blodgett (LB)膜和由C₁₆H₃₃COOH 分子组成的单层膜的摩擦性质. 结果显示: 1) 随着混合单层膜内的不同分子链长差的减小, 其剪切压随之减小, 摩擦力主要来自单层膜间的库伦作用; 2) 混合膜内的两种不同分子的尾基排列对其摩擦性能影响较大, 当混合LB膜中所有分子尾基全同排列时剪切压较小. 当分子链长差为1 个C-C键长时, 分子尾基排列对膜的摩擦性质影响较大. 3) 同种分子尾基全同排列组成的单层膜, 当上下两单层膜的尾基呈镜面对称时, 其剪切压随着分子链长的增加而减小, 摩擦力主要来自膜间的库伦作用; 当上下两单层膜的尾基呈中心对称时, 膜间摩擦力主要来自膜间的范德华 (VDW) 作用. 关键词： 分子动力学模拟 纳米摩擦 薄膜 库伦能     

Conformational order of n-dodecanethiol and n-dodecaneselenol monolayers on polycrystalline copper investigated by PM-IRRAS and SFG spectroscopy

Self-assembled monolayers (SAMs) of n-dodecanethiol (C₁₂H₂₅SH) and n-dodecaneselenol (C₁₂H₂₅SeH) on polycrystalline copper have been elaborated with the purpose of achieving densely packed and crystalline-like assemblies. By combining the surface sensitivity of polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) and sum-frequency generation spectroscopy (SFG), the effect of the self-assembly time (15 min, 30 min, 1 h, 2 h and 24 h) on the formation of n-dodecanethiol and n-dodecaneselenol monolayers on untreated and electrochemically reduced polycrystalline copper has been investigated. On electrochemically reduced copper, PM-IRRAS spectroscopy shows that both molecules are able to form well organized layers. SFG spectroscopy indicates that the C₁₂H₂₅SeH SAMs are slightly better ordered than those achieved with C₁₂H₂₅SH. On untreated copper, the two molecules lead to different film organizations. Both PM-IRRAS and SFG indicate that C₁₂H₂₅SH SAMs are of the same film quality as those obtained on electrochemically reduced copper. On the contrary, C₁₂H₂₅SeH monolayers are invariably poorly organized at the molecular level.     

Crystal structure of di-(L-serine) phosphate monohydrate [C3O3NH7]2H3PO4H2O

The crystal structure of di-(L-serine) phosphate monohydrate [C₃O₃NH₇]₂H₃PO₄H₂O is determined by single-crystal x-ray diffraction. The intensities of x-ray reflections are measured at temperatures of 295 and 203 K. The crystal structure is refined using two sets of intensities. It is established that, in the structure, symmetrically nonequivalent molecules of L-serine occur in two forms, namely, the monoprotonated positively charged molecule CH₂(OH)CH(NH₃)⁺COOH and the zwitterion CH₂(OH)CH(NH₃)⁺COO^?, which are linked with each other and with the H₂PO ^?₄ ion through a hydrogen-bond system involving water molecules.

     

Mixed self-assembled monolayers of Co-porphyrin and n-alkane phosphonates on gold

The present work focuses on the surface immobilization by self-assembly of pure and mixed Co-porphyrin (Co-Porph-PO₃H₂) and n-alkane phosphonic acids (n-C_nH_2n + 1PO₃H₂; n = 4, 5 and 10) from n-butanol solutions on gold substrates. The stability, amount, and packing of the phosphonic molecules attached to the Au (111) surface were investigated by electrochemical reductive desorption studies, and monolayers' thickness was estimated by ellipsometry. The morphological changes induced by the adsorption of n-decane phosphonic acid on gold were analysed by scanning tunnelling microscopy. The redox behavior of Co-Porph-PO₃H₂ SAMs was assessed in organic medium and compared that of Co-Porph-CO₂CH₃ precursor in solution, confirming the self-assembly of the metalloporphyrin molecules. With the purpose of reducing the electrostatic interactions between the porphyrin bulky terminal groups in the SAM, n-C₅H₁₁PO₃H₂ and n-C₁₀H₂₁PO₃H₂ were used to form mixed monolayers with Co-Porph-PO₃H₂ on gold. Intermediate electrochemical desorption potentials regarding those values of pure monolayers, as well as an increase of phosphonate surface density compared to that of Co-Porph-PO₃H₂ SAM, confirm the presence of two-component SAMs, which indicates that porphyrin moieties are diluted in the monolayer. The electrocatalytic activity of the immobilized molecules was demonstrated towards the reduction of molecular oxygen, in acidic medium.     

Comparative Plasma Chemical Reaction Studies of CH4/Ar and C2Hm/Ar (m = 2,4,6) Gas Mixtures in a Dielectric Barrier Discharge

Plasma chemical reactions in CH4/Ar and C₂H_m/Ar (m = 2, 4, 6) gas mixtures in a dielectric barrier discharge at medium pressure (300 mbar) have been investigated. From mass spectrometry the production of H₂ and formation of larger hydrocarbons such as C_nH_m with up to n = 12 is inferred. Hydrogen release is most pronounced for CH₄ and C₂H₆ gas mixtures. Fourier Transform InfraRed (FTIR) spectroscopy reveals the formation of substituted alkane (sp³), alkene (sp²), and alkyne (sp) groups from the individual gases which are used in this work. Abundant formation of acetylene occurs from C₂H₄ and to a lesser extent from C₂H₆ and CH₄ precursor gases. The main reaction pathway of acetylene leads to the formation of large molecules via C₄H₂ and, eventually, to nano‐size particles. The experimental results are in reasonable agreement with simulations which predict a pronounced electron temperature and gas pressure dependency. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Investigation of structural evolution of hydrogen-bond networks of water clusters at 1 and 300 K

Computer simulation of water clusters (H₂O) _n , Na⁺(H₂O) _n and K⁺(H₂O) _n (n ?? 8) at temperatures of 1 and 300 K was carried out using the Monte Carlo method. All the types of the hydrogen-bond network structures at equilibrium configurations of the water clusters and, among them, the most probable ones at temperatures of 1 and 300 K, were detected. The analysis of the most probable types of hydrogen-bond networks at equilibrium configurations of water clusters revealed that clusters with n water molecules inherit the configuration of clusters with n ? 1 water molecules with an accuracy of one hydrogen bond.     

Synthesis and luminescence properties of lead-halide based organic–inorganic layered perovskite compounds (CnH2n+1NH3)2PbI4 (n=4, 5, 7, 8 and 9)

This paper describes the synthesis and characterization of organic–inorganic layered perovskite compounds, (C_nH_2n+1NH₃)₂PbI₄ (n=4, 5, 7, 8 and 9). The effect of the number of carbon atoms on luminescence properties has been examined. Thin films of microcrystalline (C_nH_2n+1NH₃)₂PbI₄ fabricated by spin-coating are highly oriented, with the c-axis perpendicular to the substrate surface. Temperature-dependent optical absorption spectra reveal that (C_nH_2n+1NH₃)₂PbI₄ films (n=4, 7, 8 and 9) show the structural phase transitions. The excitonic structures of (C_nH_2n+1NH₃)₂PbI₄ vary with the number of carbon atoms of the alkyl chain length. At low temperatures below 100 K, the lowest-energy free-exciton band of (C_nH_2n+1NH₃)₂PbI₄ (n=7, 8 and 9) split into three fine-structure levels. In contrast to (C_nH_2n+1NH₃)₂PbBr₄ films, (C_nH_2n+1NH₃)₂PbI₄ (n=7, 8 and 9) shows no triplet exciton emission, but it shows the Stokes-shifted emission from bound excitons.     

Surface modification of calcium fluoro and hydroxyapatite by 1-octylphosphonic dichloride

The reactivity of the surface of calcium hydroxyapatite (CaHAp) and fluorapatite (CaFAp) was tested and compared by grafting the 1-octylphosphonic dichloride (C₈H₁₇OPCl₂) using a molar ratio x = 2 or 4, x = n(organic)/n(apatite). Successful synthesis was confirmed by different characterisation techniques such as X-ray powder diffraction patterns, IR spectroscopy, MAS-NMR (¹H and ³¹P) and chemical analysis.The difference between their specific surface area (SSA: 57.46 for HAp and 12.09 m²/g for FAp), the percentage of carbon measured after treatment with (C₈H₁₇OPCl₂) and the intensities of IR bands attributed to the grafted moiety suggests that the surface of hydroxyapatite is more reactive than that of fluorapatite.The ³¹P CP-MAS-NMR spectra of treated fluorapatite show a significant change in isotropic signal due to the protonation and deprotonation of superficial phosphate group. This can be explained by the difference in the nature of inorganic material.     

Atomic level analysis of biomolecules by the scanning atom probe

Utilizing the unique features of the scanning atom probe (SAP) the binding states of the biomolecules, leucine and methionine, are investigated at atomic level. The molecules are mass analyzed by detecting a single atom and/or clustering atoms field evaporated from a specimen surface. Since the field evaporation is a static process, the evaporated clustering atoms are closely related with the binding between atoms forming the molecules. For example, many thiophene radicals are detected when polythiophene is mass analyzed by the SAP. In the present study the specimens are prepared by immersing a micro cotton ball of single walled carbon nanotubes (SWCNT) in the leucine or methionine solution. The mass spectra obtained by analyzing the cotton balls exhibit singly and doubly ionized carbon ions of SWCNT and the characteristic fragments of the molecules, CH₃, CHCH₃, C₄H₇, CHNH₂ and COOH for leucine and CH₃, SCH₃, C₂H₄, C₄H₇, CHNH₂ and COOH for methionine.