Efficient Synthesis and Properties of Single‐Crystalline [SnTe4]4− Salts

Single‐crystalline K⁺, Rb⁺, and Cs⁺ salts of the ortho‐tellurostannate anion have been prepared by a very efficient fusing/extraction/evaporation method. The resulting compounds with the general composition [A₄(H₂O)_n][SnTe₄] can be transferred into mixed H₂O/en solvates by solving the hydrates in 1,2‐diaminoethane (en) and ensuing layering by toluene. A mixed Rb⁺/Ba²⁺ salt results from a partial cation exchange of the Rb⁺ hydrate phase in solution. All hydrates react to polytellurides when exposed to air and represent useful starting materials for the synthesis of transition metal complexes with [SnTe₄]^4? groups as binary main group elemental ligands. [K₄(H₂O)_0.5][SnTe₄] ( 1 ), [Rb₄(H₂O)₂][SnTe₄] ( 2 ), [Cs₄(H₂O)₂][SnTe₄] ( 3 ), [K₄(H₂O)(en)][SnTe₄] ( 4 ), [Rb₄(H₂O)_0.67(en)_0.33][SnTe₄] ( 5 ), [Cs₄(H₂O)_0.5(en)_0.5][SnTe₄] ( 6 ), and [Rb₂Ba(H₂O)₁₁][SnTe₄] ( 7 ) were characterized by means of X‐ray diffractometry and optical absorption spectroscopy.     

Self-assembled calix[4]arenequinhydrone on the platinum electrode by cathodic reduction of calix[4]arenediquinone

The electrochemical reduction of di(methoxy-p-tert-butyl)calix[4]arenediquinone led to its calix[4]arenedihydroquinone. The presence of both in the solution refers to the generation of calix[4]arenequinhydrone charge-transfer complex at the electrode surface through a donor/acceptor process type. Self-assembled adlayers of calix[4]arenequinhydrone was obtained by partial electrochemical reduction. Electrochemical deposition of the last form was achieved on the platinum disk electrode at ?1.16?V versus SCE (saturated calomel electrode) in aprotic solution by cathodic reduction of the starting substrate. The deposit was first characterized by cyclic voltammetry (CV) in electrolytic solution and then in electrolyte support solution and finally in a ferricyannure solution. The self-assembled product was characterized by MALDI-TOF Mass and IR spectroscopy techniques. It was observed too by SEM technique. Calix[4]arenequinhydrone is observed on the electrode surface as hexangular prisms with a length of few micrometers.     

Novel starshaped initiators for the controlled radical polymerization based on resorcin[4]- and pyrogallol[4]arenes

Multifunctional macrocyclic initiators for the atom transfer radical polymerization (ATRP) based on different resorcin[4]- and pyrogallol[4]arenes have been synthesized. The initiators with 8, 12 and 16 tertiary -bromoesters on the core were received by complete esterification of all phenolic groups with 2-bromo-isobutyryl bromide. The calixarene derivatives with aliphatic chains on the bridging methine carbon were obtained as their rccc (all cis) isomers, while the corresponding calixarenes with aromatic substituents gave mixtures of their rccc and rctt (cis, cis, trans, trans) isomers.     

Platinum chalcogenido MCM-41 analogues. High hexagonal order in mesostructured semiconductors based on Pt(2+) and [Ge(4)Q(10)](4-) (Q = S, Se) and [Sn(4)Se(10)](4-) adamantane clusters

Highly periodic hexagonal honeycombs of platinum-germanium chalcogenide and platinum-tin selenide frameworks were prepared by linking corresponding [Ge(4)Q(10)](4)(-) (Q = S, Se) and [Sn(4)Se(10)](4)(-) clusters with Pt(2+) ions. The non-oxidic honeycombs designated as C(n)PyPtGeQ and C(n)PyPtSnSe were templated by the lyotropic liquid-crystalline phase of alkylpyridinium surfactant [C(n)H(2)(n)(+1)NC(5)H(5)]Br (C(n)PyBr) with n= 12, 14, 16, 18, 20, and 22. Although the materials are amorphous at the microscale, they have crystalline mesoporosity with well-ordered and aligned surfactant-filled cylindrical pores. In addition to high mesoscopic order, the pore-pore separation is adjustable with the surfactant chain length (i.e., value of n). The quality of these materials, as judged by the degree of hexagonal order, rivals or exceeds that reported for the highest quality MCM-41 silicates. The materials have the lowest band gap reported so far for mesostructured chalcogenides solids, in the range 1.5 < E(g)< 2.3 eV. The C(n)PyPtGeS analogues show intense photoluminescence at 77 K when excited with light above the band gap.     

Syntheses based on dimethylpyrazoles. 9. Synthesis and spectral peculiarities of isomeric pyrazolo[3′,4′-5,6]- and-[5′,4′-5,6]-pyrimido[1,2-b]benzo[d,e]isoquinoline-4,12-diones

2-Methyl-2,4,12,13H-pyrazolo[3,4-5,6]pyrimido[1,2-b]benzo[d,e]isoquinoline-4,12-dione and its 8-nitro- and 8-amino-substituted derivatives were obtained starting from 4-amino-3-carbamoyl-1-methylpyrazole and naphthalic and 4-nitronaphthalic anhydrides. The spectral properties of the synthesized compounds were studied.See [1] for Communication 8.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 237–241, February, 1990.     

Anion receptors based on ureido-substituted thiacalix[4]arenes and calix[4]arenes

The regioselective nitration of 25,27-dipropoxythiacalix[4]arene was carried out as a key step in the synthesis of thiacalix[4]arene derivative bearing two arylureido functions on the upper rim. The preorganisation of ureido units using the thiacalix[4]arene/calix[4]arene moieties as a molecular scaffold gave novel anion receptors. These compounds, albeit based on hydrogen bonding interactions, show good complexation ability even in highly HB-competitive solvent, such as DMSO. Direct comparison of otherwise identical structures 6a and 7a revealed remarkable dominance of the thiacalix[4]arene derivative over its classical analogue in anion binding.     

Semiconducting polymers based on charge-transfer complexes. II. Crystal structure of poly-N-4-[4-(methylthio)phenoxy]butyrylethylenimine

Of the two electron-donor-containing polymers whose synthesis was described in Part I of this series, one was crystalline. This polymer, which contains (methylthio)phenoxy electron-donating groups on the side chains of an N-acyl-substituted polyethylenimine, could be indexed in a triclinic unit cell of dimensions a = 4.35 Å, b = 24.0 Å, c = 12.7 Å, and α = β = γ = 90°. The polymer has the side chains alternating on each side of the polymer backbone. They extend to form at 24.0 Å repeat in that direction. The thickness of the ribbonlike molecule is 4.35 Å, while the repeat distance along the polymer backbone is 12.7 Å, which includes four monomer units.     

A gradient HPLC test procedure for the determination of impurities and the synthetic precursors in 2-[4-(1-hydroxy-4-[4-(hydroxydiphenylmethyl)-1-piperidinyl]-butyl)-phenyl]-2-methylpropionic acid

A gradient high-performance liquid chromatographic (HPLC) test procedure is developed and evaluated for its ability to establish the levels of impurities and remaining synthetic precursors in 2-[4-(1-hydroxy-4-[4-(hydroxydiphenylmethyl)-1-piperidinyl]-butyl)-phenyl]-2-methylpropionic acid. A gradient program with a mobile phase of 0.02 M sodium phosphate buffer and 0.004 M sodium perchlorate in acetonitrile-water (approximately pH 2.5) is used with a Spherisorb C6 column. The acetonitrile composition is increased linearly from 40% to 65% over a 45-min period and held at 65% for 20 min. UV detection at 210 nm is used to quantitate all components. The procedure is validated for accuracy using spiked levels (0.1% to 1.5%, w/w) with two suspected impurities, the synthetic precursors. A multiday repeatability study using two different Spherisorb C6 columns and HPLC systems shows consistent impurity quantitation results with one production lot of the bulk compound.     

Derivatives of benzo[4,5]cyclohepta[1,2-b]thiophene. 4. Synthesis of 1-(9,10-dihydro-4H-benzo[4,5]cyclohepta[1,2-b]thiophen-4-yl)-3-alkylaminoazetidines

Thirteen 1-(9,10-dihydro-4H-benzo[4,5]cyclohepta[1,2-b]thiophen-4-yl)-3-alkylaminoazetidines 11 have been synthesized in three steps from 4-amino-9,10-dihydro-4H-benzo[4,5]cyclohepta[1,2-b]thiophene ( 6 ), which was obtained from the reduction of either 4-azido 4 or 4-hydroxyimino 5 derivatives. All the compounds have been evaluated as potential antidepressive agents.     

31P solid state NMR studies of metal selenophosphates containing [P2Se6]4-, [P4Se10]4-, [PSe4]3-, [P2Se7]4-, and [P2Se9]4- ligands

31P solid-state nuclear magnetic resonance (NMR) spectra of 12 metal-containing selenophosphates have been examined to distinguish between the [P(2)Se(6)](4-), [PSe(4)](3-), [P(4)Se(10)](4-), [P(2)Se(7)](4-), and [P(2)Se(9)](4-) anions. There is a general correlation between the chemical shifts (CSs) of anions and the presence of a P[bond]P. The [P(2)Se(6)](4-) and [P(4)Se(10)](4-) anions both contain a P[bond]P and resonate between 25 and 95 ppm whereas the [PSe(4)](3-), [P(2)Se(7)](4-), and [P(2)Se(9)](4-) anions do not contain a P[bond]P and resonate between -115 and -30 ppm. The chemical shift anisotropies (CSAs) of compounds containing [PSe(4)](3-) anions are less than 80 ppm, which is significantly smaller than the CSAs of any of the other anions (range: 135-275 ppm). The smaller CSAs of the [PSe(4)](3-) anion are likely due to the unique local tetrahedral symmetry of this anion. Spin-lattice relaxation times (T(1)) have been determined for the solid compounds and vary between 20 and 3000 s. Unlike the CS, T(1) does not appear to correlate with P-P bonding. (31)P NMR is also shown to be a good method for impurity detection and identification in the solid compounds. The results of this study suggest that (31)P NMR will be a useful tool for anion identification and quantitation in high-temperature melts.     

Solvent Extraction of Selenate and Chromate Using a Diaminocalix[4]arene

The extraction of Se(VI) and Cr(VI) using a diammoniumcalix[4]arene was investigated. A study of parameters such as ligand concentration, pH or diluent was carried out and allowed to specify the stoichiometry of the extracted species. It was shown that Se(VI) is extracted into CHCl₃ as (LH₂ ²⁺, Cl^-, HSeO₄ ^-) and ((LH₂ ²⁺)₂, 2Cl^-, SeO₄ ^2-)species at pH 2.6. An increase of pH or an addition of 5% or 10% decanol in CHCl₃ favors the extraction of SeO₄ ^2- over HSeO₄ ^- but leads to a drastic decrease of seleniumextraction. Cr(VI) was shown to be extracted as(LH₂ ²⁺, Cl^-, HCrO₄ ^-) at pH 2.6 and probably as (LH⁺, HCrO₄ ^-) for higher pH.