Morphology and grafting of oxazoline-functional polymer particles with various carboxylic acids

Oxazoline-functionalized, crosslinked PMMA-particles, prepared by free radical nonaqueous dispersion polymerization, were grafted with n-decanoic acid and carboxylic acid-terminated polystyrene. Oxazoline groups, separated by an alkylspacer from the PMMA backbone, showed enhanced mobility with respect to the backbone, as evaluated by solid-state NMR spectroscopy using a dipolar filter. As a function of molecular mass of the carboxylic acid, the oxazoline conversion varied from 70 mol % for n-decanoic acid to 1% for monocarboxylate-terminated polystyrene CT-PS with M_n: 15,900 g/mol. Morphological studies, performed by TEM, showed that reaction with acid terminated polystyrene results exclusively in interfacial grafting at the particle surface. At low grafting levels a raspberry-like morphology was obtained, whereas grafting levels exceeding 14 wt % CT-PS resulted in core-shell morphology. Core-shell morphology was also verified by static light scattering using toluene solvent, which is isorefractive to the PMMA core. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1821–1827, 1998     

Curing reaction of biphenyl epoxy resin with different phenolic functional hardeners

The investigation of cure kinetics and relationships between glass transition temperature and conversion of biphenyl epoxy resin (4,4′-diglycidyloxy-3,3′,5,5′-tetramethyl biphenyl) with different phenolic hardeners was performed by differential scanning calorimeter using an isothermal approach over the temperature range 120–150°C. All kinetic parameters of the curing reaction including the reaction order, activation energy, and rate constant were calculated and reported. The results indicate that the curing reaction of formulations using xylok and dicyclopentadiene type phenolic resins (DCPDP) as hardeners proceeds through a first-order kinetic mechanism, whereas the curing reaction of formulations using phenol novolac as a hardener goes through an autocatalytic kinetic mechanism. The differences of curing reaction with the change of hardener in biphenyl epoxy resin systems were explained with the relationships between T_g and reaction conversion using the DiBenedetto equation. A detailed cure mechanism in biphenyl-type epoxy resin with the different hardeners has been suggested. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 773–783, 1998     

Synthesis of triblock copolymers—(polyA-poly butadiene-polyA)—via metathesis polymerization

A series of triblock copolymers of the type A-B-A were synthesized using tungsten chloride-anchored hydroxyl-terminated polybutadiene (HTPBD) catalyst. Monomers like phenylacetylene (PA), norbornene (NBE), cyclooctadiene (COD), and cyclopentene (CP) were polymerized via metathesis pathway using this catalyst. The efficiency of this anchored catalyst in producing A-B-A triblock copolymers was explored and compared under the same experimental conditions like solvent system and reaction temperature. This anchored catalyst upon reaction with PA produced polyPA-block-polyBD-block-polyPA in high yield and with low polydispersity (pdi) compared to HTPBD. The formation of the triblock copolymers by this method was evinced by NMR, TGA, and GPC data as well as by delinking and inverse addition studies. All the cycloalkenes polymerized via ring-opening metathesis polymerization (ROMP) with the catalyst and yielded triblock copolymers. The mode of synthesis of triblocks could be construed as switching the mechanism of polymerization from radical to olefin metathesis. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2601–2610, 1998     

Stress-induced straightening of tie chains in oriented PE films as revealed by Raman (LAM) study

The Raman longitude acoustical mode (LAM) study of axially stressed polyethylene-made microfilms gave evidence of the formation of the straight tie molecules localized in two neighboring crystals and in an amorphous layer situated between them. The samples were bicomponent blends composed of polyethylenes with different MW (7 × 10⁴ and 2 × 10⁶). Each MW fraction exhibits an individual LAM band responding to crystals with the size specific to a given fraction. Under tensile stress, the bands shift insignificantly towards an exciting laser line. In addition, the LAM localized on all-trans sequencies with the length exceeding the mean crystallite size appear in the spectrum of a stressed sample. The reversibility of these spectral changes depends on the draw ratio of samples. We conclude the effect is due to stress-induced gauch-to-trans transformations taking place in the amorphous layers. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2829–2833, 1998     

Blends of polycarbonate and acrylic polymers: Crystallization of polycarbonate

The microstructure of amorphous polymer blends has been extensively studied in the past, but now there is a growing interest for polymer blends where one or more of the components can crystallize. In this study we investigate such blends, namely miscible polycarbonate (PC)/acrylic blends. Using small angle X-ray scattering (SAXS) measurements, combined with atomic force microscopy (AFM), electron microscopy (SEM), and optical microscopy, we demonstrate that the amorphous acrylic component mostly segregates inside the spherulites between the lamellar bundles (interfibrillar segregation). Varying the PC molecular weight or the mobility of the amorphous component (by changing its molecular weight and T_g) does not change the mode of segregation. So far qualitative predictions of the mode of segregation in semicrystalline polymer blends have been proposed using the δ parameter (the ratio between the diffusion coefficient D of the amorphous component in the blend and the linear crystallization rate G), introduced by Keith and Padden. Our results suggest that other parameters have to be considered to fully understand the segregation process. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2197–2210, 1998     

Comments on the determination of absolute rate constants in anionic polymerization

Claims have recently been made that absolute rate constants for chain propagation of the unassociated active centers can be made in systems where a high degree of association is present. Anionic polymerization of styrene in nonpolar solvents with lithium as counterion is a typical case. The conditions required to obtain these constants (and the associated aggregate dissociation constants) are described using data from styrene polymerization with lithium and potassium as counterions and data from o-methoxystyrene polymerization. The conclusion reached must be that the k_p and K_ds values obtained for styrene with counterion lithium cannot be obtained from existing literature data and are simply artifacts of the computer analysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1065–1068, 1998     

Synthesis of metal‐free poly(1,4‐dioxan‐2‐one) by enzyme‐catalyzed ring‐opening polymerization

To avoid the harmful effects of metallic residues in poly(1,4‐dioxan‐2‐one) (PPDO) for medical applications, the enzymatic polymerization of 1,4‐dioxan‐2‐one (PDO) was carried out at 60 °C for 15 h with 5 wt % immobilized lipase CA. The lipase CA, derived from Candida antarctica, exhibited especially high catalytic activity. The highest weight‐average molecular weight (M_w = 41,000) was obtained. The PDO polymerization by the lipase CA occurred because of effective enzyme catalysis. The water component appeared to act not only as a substrate of the initiation process but also as a chain cleavage agent. A slight amount of water enhanced the polymerization, but excess water depressed the polymerization. PPDO prepared by enzyme‐catalyzed polymerization is a metal‐free polyester useful for medical applications. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1560–1567, 2000     

Swelling of polyacrylamide gels in polyacrylamide solutions

Swelling behavior of polyacrylamide (PAAm) and polyacrylamide-co-polyacrylic acid (PAAm-co-PAAc) gels was investigated in aqueous solutions of monodisperse PAAms with molecular weights (M_w) ranging from 1.5 × 10³ to 5 × 10⁶ g/mol. The volume of the gels decreases as the PAAm concentration in the external solution increases. This decrease becomes more pronounced as the molecular weight of PAAm increases. The classical Flory–Huggins (FH) theory correctly predicts the swelling behavior of nonionic PAAm gels in PAAm solutions. The polymer–polymer interaction parameter χ₂₃ was found to decrease as the molecular weight of PAAm increases. The swelling behavior of PAAm-co-PAAc gels in PAAm solutions deviates from the predictions of the FH theory. This is probably due to the change of the ionization degree of AAc units depending on the polymer concentration in the external solution. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1313–1320, 1998     

High-precision gravimetric technique for determining the solubility and diffusivity of gases in polymers

An in situ gravimetric technique, employing an electrobalance, is described for determining the solubility and diffusivity of gases in polymers over extended ranges of temperature and pressure. Solubilities of CO₂ in polystyrene at 35°C were measured as a test case; the results are in excellent agreement with the literature values determined by the pressure decay method. Solubility and diffusivity results are also reported for PVC-CO₂ at 35°C and for PS-1,1,1,2-tetrafluoroethane at 30, 90, and 120°C. A comparison with other studies shows the in situ method to be more efficient and precise than the ones based on weighing the gas-saturated polymer under ambient conditions. The kinetics of gas sorption were analyzed in terms of two data reduction techniques to derive diffusion coefficients. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2025–2032, 1998     

Lipase‐catalyzed ring‐opening polymerization of 6(S)‐methyl‐morpholine‐2,5‐dione

Lipase‐catalyzed ring‐opening bulk polymerizations of 6(S)‐methyl‐morpholine‐2,5‐dione (MMD) were investigated. Selected commercial lipases were screened as catalysts for MMD polymerization at 100 °C. Polymerizations catalyzed with 10 wt % porcine pancreatic lipase type II crude (PPL), lipase from Pseudomonas cepacia, and lipase type VII from Candida rugosa resulted in MMD conversions of about 75% in 3 days and in molecular weights ranging from 8200 to 12,100. Poly(6‐methyl‐morpholine‐2,5‐dione) [poly(MMD)] had a carboxylic acid group at one end and a hydroxyl group at the other end. However, lipase from Mucor javanicus showed lower catalytic activity for the polymerization. During the polymerization, racemization of the lactate residue took place. PPL was selected for further studies. The rate of polymerization increased with increasing PPL concentration under otherwise identical conditions. When the PPL concentration was 5 or 10 wt % with respect to MMD, a conversion of about 70% was reached after 6 days or 1 day, respectively, whereas for a PPL concentration of 1 wt %, the conversion was less than 20% even after 6 days. High concentrations of PPL (10 wt %) resulted in high number‐average molecular weights (<3 days); with a lower concentration of PPL, lower molecular weight poly(MMD) was obtained. The concentration of water was an important factor that controlled not only the conversion but also the molecular weight. With increasing water content, enhanced polymerization rates were achieved, whereas the molecular weight of poly(MMD) decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3030–3039, 2005     

Epoxidation of bacterial polyesters with unsaturated side chains. II. Rate of epoxidation and polymer properties

Poly(3-hydroxyoctanoate-co-3-hydroxy-10-undecenoate)s (PHOUs) with controlled amounts of unsaturated repeating units were epoxidized to various extents with m-chloroperbenzoic acid (MCPBA) in homogeneous solution. The epoxidation reaction was second order, with an initial rate constant of 1.1 × 10⁻³Lmol^−1.s⁻¹ at 20°C, regardless of the unsaturated unit content in PHOU. No substantial change in either molecular weight or molecular weight distribution occurred as a result of epoxidation, but the melt transition temperature and enthalpy of melting both decreased as the unsaturated groups were increasingly converted into epoxide groups. In contrast, the glass transition temperature (T_g) increased by approximately 0.25°C for each 1 mol % of epoxidation, irrespective of the composition of the PHOU. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2381–2387, 1998     

Synthesis and radical polymerization of a vinyl monomer having a sulfonylacylurea moiety and hydrolysis of the obtained polymer

The radical polymerization of N-acryloyl-N′-(p-tolylsulfonyl)urea ( 2 ), prepared easily by the reaction of p-toluenesulfonyl isocyanate with acrylamide, was carried out in DMF, DMSO, or NMP at 60°C by use of AIBN as an initiator to give a polymer 3 in a good yield. Copolymerization parameters of 2 were evaluated by the copolymerization with MMA. Polymer 3 was readily hydrolyzed in an aqueous NaOH solution (1M) at room temperature to give poly(acrylic acid). The reason for the higher activity for hydrolysis of 3 compared to an ordinary amide is discussed. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1515–1519, 1998     

Morphological study of fatigue-induced damage in isotactic polypropylene

This article reports initial results of an investigation whose aim is to characterize fatigue damage induced in semicrystalline polymers subjected to uniaxial high cycle fatigue. Herein we report results obtained from fatiguing tensile bars of high molecular weight compression-molded alpha-phase iPP. Samples were fatigued for up to one million cycles at a frequency of 2 Hz. During fatigue, in situ measurements of dynamic mechanical response and energy densities were recorded. Postmortem morphological studies were also conducted using SEM of etched surfaces and TOM. The results show that damage formation occurs in a regularly spaced array of crazes. This damage, its evolution, and energetics are discussed as they relate to the overall fatigue life of the material. A methodology to isolate the energy consumption for the formation of a single craze is given. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2751–2760, 1998     

Correlation of chemical structure and swelling behavior in N-alkylacrylamide hydrogels

The thermoshrinking properties have been studied for the series of N-alkyl-acrylamide hydrogels (alkyl = methyl, ethyl, isopropyl, and n-propyl), which were prepared by free-radical copolymerization of the alkylacrylamide, sodium acrylate, and N,N′-methylenebis(acrylamide) (BIS) in aqueous solution. The reaction mixtures were prepared using the same nominal compositions in an effort to study the effect of the chemical structure of the alkyl substituent on the gel swelling behavior as a function of temperature. The alkyl group was found to have a pronounced effect on the features of gel swelling. Generally, larger alkyl chains produced dramatic decreases in gel transition temperature. In addition, a change in the nature of the swelling behavior from continuous to discontinuous was noted upon changing the alkyl group from ethyl to the two propyl derivatives. Discontinuous transitions were accompanied by hysteresis. The transition temperatures of the isomeric propyl derivatives were found to differ by 12°C, with n-propyl exhibiting the lower value. Additionally, a quantitative correlation was found between the gel transition temperatures and the water/octanol partition coefficients for appropriately chosen small molecule model compounds. The transition temperatures of other gels in the series, including the cyclopropyl derivative and the n-propyl/isopropyl copolymer gels (NIPA/NNPA), also fit this correlation. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2095–2102, 1998     

On the interfacial energy of extended-chain crystals from polyethylene melt by revised Flory equations of fusion

To analyze extended-chain crystalline systems composed of linear polyethylene, Flory's conventional theory of fusion is reconsidered by introducing a new concept of crystallinity. When this new treatment is applied to a melting case of a low molecular weight polyethylene fraction (M_n = 5600) isothermally bulk crystallized, a certain result that very large lamellar thickness was caused by a very small increase in crystallization temperature can satisfactorily be explained by a significant change in interfacial free energy of the crystallite end. Further, it shows 14–17 kJ/mol as a nonequilibrium value range of interfacial free energy for highly crystalline polyethylene fractions of low molecular weight M_n ≦ 5600 by using the previous data presented by other workers. A similar result is also obtained on the M_n = 5600 fraction by analyzing from a standpoint of equilibrium crystallinity. In either case, the estimated range of interfacial free energy is consistent with the conventional range. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1293–1303, 1998     

Formation of quinoid fragments in vacuum-deposited poly-para-phenylene films: IR spectroscopy evidence

The structure of vacuum-deposited poly-para-phenylene (PPP) films prepared from a high-molecular-weight PPP powder has been investigated by IR spectroscopy. It has been demonstrated that in IR spectra of PPP films exhibiting intense luminescence an extremely strong band at 1375 cm⁻¹ is observed, which is not typical for currently known PPP modifications. Based on the IR spectral data, the model of formation of a PPP chain with quinoid fragments in the ground electronic state is proposed. The structure of defects that inevitably spring up during the benzenoid–quinoid transition is discussed. High intensity of the band at 1375 cm⁻¹ is associated with the change in the order of the “defect” C C bond between adjacent quinoid and benzenoid units. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1043–1052, 1998     

Phthalonitrile cure reaction with aromatic diamines

Phthalonitrile monomers can be polymerized thermally in the presence of small amounts of curing agents into thermosetting polymers. The thermosets exhibit outstanding thermo-oxidative stability, display good mechanical properties, and offer promise as matrices for composite applications. The phthalonitrile cure reaction is typically accomplished with an aromatic diamine, 1,3-bis(3-aminophenoxy)benzene (m-APB), added in the range of 1.5–2% by weight of the monomer in the melt phase. This article addresses the cure reaction with a sulfone-containing diamine, bis[4-(4-aminophenoxy)phenyl] sulfone (p-BAPS), which shows lower volatility as determined from thermogravimetric studies (TGA) compared to m-APB at the processing temperatures typically employed for phthalonitrile cures. Rheometric studies conducted to monitor the viscosity increase during a cure reaction suggest that the cure reaction with m-APB is faster compared to the reaction with p-BAPS. Even though differences are seen in the initial cure rates, the final cured products are similar in terms of the glass transition temperatures and thermal and oxidative stabilities. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1885–1890, 1998     

Differential scanning calorimetry (DSC) and Raman spectroscopy study of poly(dimethylsiloxane)

Poly(dimethylsiloxane) was studied by laser Raman spectroscopy and differential scanning calorimetry. The Si O Si skeletal mode at 489 cm⁻¹ and the C Si C deformation bands at 188 cm⁻¹ and 158 cm⁻¹ were studied as functions of temperature from ambient to −130°C, and effects of temperature interpreted in accordance with results from thermal analysis. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2805–2810, 1998     

Enthalpy relaxation in polymethyl(α-n-alkyl)acrylates: Effect of length of alkyl chain

In this work, we have investigated by DSC the structural relaxation of amorphous polymethyl(α-n-alkyl)acrylates in which it is possible to change the length of the alkyl chain. We have evaluated the Narayanaswamy parameter, x, which controls the relative contribution of temperature and of structure to the relaxation time, the apparent activation energy, Δh*, and the nonexponentiality parameter, β, of the stretched exponential response function. The results suggest that x increases while Δh* decreases and β remains constant as the length of the side chain increases. This allows us to comment on the effect of chemical modification on the relaxation kinetics. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 583–593, 1998     

Polymers from multifunctional isocyanates 14. Alternating copolymers from isocyanato alkenes: Copolymerization of 2-propenyl isocyanate with trimethylsilyl methacrylate as electron acceptor monomer

The copolymerization of 2-propenyl isocyanate ( 1 ) with trimethylsilyl methacrylate ( 2 ) has been investigated. 1 is an electron donor monomer with little tendency to undergo homopolymerization, while 2 is an electron acceptor monomer, capable of free radical homopolymerization. Polymerization to low conversion in benzene gave copolymers with preferential incorporation of 2 and a tendency towards alternating copolymers with increasing amounts of 1 in the feed (1 : 1.13 with a 9 : 1 feed ratio of monomers 1 : 2 ). The glass transition temperatures of the amorphous polymers are in the range from 100–70°C, with a T_g of poly(trimethylsilyl methacrylate) being 135°C. Desilylation occurs in the presence of water, causing an exothermal reaction above the glass transition temperature probably with formation of amides, a reaction that can be used for crosslinking. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 611–616, 1998