Reaction of 3,4-disubstituted 1,2,5-oxadiazole 2-oxides with dipolarophiles : Substituent and solvent effect on the reaction courses

A variety of symmetrically or unsymmetrically 3,4-disubstituttd furoxans such as dicyano, dialkyl, diacyl, bis(phenylsulfonyl), N.N'-dialkyldicarbamoyl, 3(or 4)-methyl-4(or -3)-phenyl(or nitro, ethoxy, phenoxy, phenylthio, pyrrolidinyl, phenylsulfonyl), 3(or 4)-ethyl-4(or -3)phcnyl, and 3(or 4)-ethoxy-4(or -3)-phenylsulfonylruroxan reacted with dipolarophiles in toluene or xylene at the refluxing temperature to give nitrone-type 1,3-dipolar cycloadducts, 5-substituted 1-aza-2,8-dioxabicyclo-[3.3.0]octanes and/or 3-substituted 2-isoxazoline 2-oxides. On the other hand, some of the furoxans gave 2-isoxazolines via nitrile oxide 1,3-dipolar cycloaddition in a toluene (or xylene)-DMF solvent at the refluxing temperature.     

Effect of surfactants on the stability of thin liquid film flow on a rotating disk

The effect of surfactants on surface instabilities of thin liquid film flow on a rotating disk was studied at different flow rates Q (0.5相似文献   

Electrokinetic Separation Methods

Electrophoresis is the transport of dissolved molecules or suspended particles in a homogeneous polar liquid (such as water) under the influence of an electric field. Most molecules or particles acquire a surface electric charge when dissolved or suspended in buffered water (or other polar liquids), owing to ionization or adsorption of ions present in the water. The sign of the surface charge of molecules or particles determines whether they will migrate towards the positive or the negative electrode of the applied electric field, and the velocity of migration depends on the surface potential of the molecules or particles, as well as on the potential of the electric field.     

The hydrogen salicylate ion as ligand. Complex formation equilibria with dioxouranium (VI), neodymium (III) and lead (II)

The complexation equilibria of the hydrogen salicylate ion, HL(-), have been studied, at 25 degrees C, by potentiometric measurements with a glass electrode in 1 M NaClO4 for uranyl and Nd(III) ions and in 3 M NaClO4 for Pb(II) ion. The ligand concentration (CL) was varied between 10(-3) and 0.05 M. In the system with U(VI) the concentrations ranged between: 10(-3) < or = [U(VI)] < or = 0.01 M, 0.5 < or = CL /[U(VI)] < or = 10 and 10(-2) < or = [H+] < or = 10(-5) M; for neodymium system: 2 x 10(-3) < or = [Nd(III)] < or = 0.01, 1 < or = CL /[Nd(III)] < or = 10 and 10(-2) < or = [H+] < or = 10(-7) M; for lead system: 10(-3) < or = [Pb(II) < or = 3 x 10(-3), 1 < or = CL /Pb(II)] < or = 2 and 10(-5) < or = [H+] < or = 10(-7.3) M. The experimental data have been explained with the formation of UO2HL+, UO2L, UO2(OH)L(-), (UO2)2(OH)L2(-) UO2(HL)L(-), NdHL(2+), NdL(+), Nd(OH)L, PbHL(+), PbL and PbL2(2-). Equilibrium constants are given for the investigated ionic media and at infinite dilution.     

Sulfur dioxide mediated one-pot, three- and four-component syntheses of polyfunctional sulfonamides and sulfonic esters: study of the stereoselectivity of the ene reaction of sulfur dioxide

The ene reaction of sulfur dioxide with enoxysilanes or with allylsilanes generates silyl sulfinates that can be brominated (Br(2) or NBS) or chlorinated (NCS or Cl(2)) to produce the corresponding sulfonyl halides. They react with primary and secondary amines or alcohols to give the corresponding sulfonamides and sulfonic esters, respectively. The hetero-Diels-Alder addition of sulfur dioxide to 1-oxy- or 1,3-dioxy-1,3-dienes generates zwitterions that add to enoxysilanes or allylsilanes giving silyl sulfinates that can be converted in situ into polyfunctional sulfonamides or sulfonic esters. This realizes quick access to libraries of complicated sulfonamides and sulfonic esters applying one-pot, three- and four-component methods.     

Hydrolytic reactions of 3'-N-phosphoramidate and 3'-N-thiophosphoramidate analogs of thymidylyl-3',5'-thymidine

The diastereomeric thiophosphoramidate analogs [(R(P))- and (S(P))-3[prime or minute],5[prime or minute]-Tnp(s)T] and the phosphoramidate analog [3[prime or minute],5[prime or minute]-TnpT] of thymidylyl-3[prime or minute],5[prime or minute]-thymidine were prepared and their hydrolytic reactions over the pH-range 1-8 at 363.2 K were followed by RP HPLC. At pH < 6, an acid-catalyzed P-N3[prime or minute] bond cleavage (first-order in [H(+)]) takes place with both 3[prime or minute],5[prime or minute]-Tnp(s)T and 3[prime or minute],5[prime or minute]-TnpT, the former being about 12 fold more stable than the latter. At pH > 4, Tnp(s)T undergoes two competing pH-independent reactions, desulfurization (yielding TnpT) and depyrimidination (cleavage of the N-glycosidic bond) the rates of which are of the same order of magnitude. Also with 3[prime or minute],5[prime or minute]-TnpT the pH-independent depyrimidination competes with P-N3[prime or minute] cleavage at pH > 5.     

Réactions de germylènes avec divers oxirannes et le thiiranne. Mise en évidence de germanones et germathiones intermédiaires. Communication préliminaire

Complexed dialkylgermylenes R₂GeNR₃ or R₂GePy react with oxiranes or thiirane and lead to dialkylgermanone and germathione via germaoxetanes or germathiacyclobutane. The formation of germadioxolanes or germadithiolane finally observed arises from condensation of dialkylgermanone (or germathione) on oxiranes (or thiirane).     

Organic-inorganic nanohybrids through the direct tailoring of semiconductor nanocrystals with conjugated polymers

Two main synthetic strategies are used to prepare conjugated oligomer- or polymer-nanocrystal nanohybrids. In the first strategy ligand exchange is invoked to either replace with a bifunctional ligand, which contains a second functional group for coupling with conjugated oligomers or polymers (COs or CPs), or exchange for the functionalized COs or CPs in a "grafting-onto" process. Alternatively, in the second strategy the nanocrystal (NC) is passivated with functional ligands from which COs or CPs are directly grown in the absence of ligand exchange. The well-defined interface between the COs or CPs and NCs facilitates an efficient charge-transfer between them.     

Stacking design of inverse perovskites: the systems (Sr3-xBaxN)E, E = Bi, Sb

The first representatives of 4H (BaMnO3-type structure, P63/mmc, Z = 4) and 9R (BaMnO3-type structure, Rm, Z = 9) inverse Perovskite phases are presented. The phases are obtained within the solid solutions (Sr3-xBaxN)E with E = Bi, Sb. The crystal structures and homogeneity ranges were studied by combined X-ray and neutron diffraction as well as chemical analyses. The cubic Perovskite phase with Bi (Sb) is stable in the range of 0.00 < or = x < or = 0.90(5) (0.00 < or = x < or = 1.30(5)), the 4H variant is stable for 1.55(5) < or = x < or = 2.10(5) (1.85(5) < or = x < or = 2.45(5)), the 9R structure is stable for 2.50(2) < or = x < or = 2.55(2) (2.56(2) < or = x < or = 2.60(2)), and the 2H phase is stable for 2.75(5) < or = x < or = 3.00 (2.80(5) < or = x < or = 3.00). Ba occupies preferable sites in the hexagonal stacking of close packed layers of alkaline earth metal ions and E3-; Sr is mainly located in cubic stacked layers. The phase order upon going from cubic (Sr3N)E to 2H-type (Ba3N)E concomitant to the pronounced Sr/Ba partial order can, in general, be rationalized considering the Coulomb repulsion of nitride ions, as well as the size and charge density of the alkaline earth metal ions.     

Ternary Liquid-Liquid Equilibria Of (Acetonitrile + n-Octane + Propanols or Butanols)

Abstract

The liquid-liquid equilibria of (acetonitrile + n-octane + 1-propanol or 2-propanol or 1-butanol or 2-butanol, or iso-butanol or tert-butanol) at 298.15 K have been measured. The ternary experimental results agree well with those predicted from the UNIQUAC associated-solution model with binary parameters alone.     

Alkylation of 4,5-dichloropyridazin-6-one with α,ω-dibromoalkanes or 4,5-dichloro-1-(ω-bromoalkyl)pyridazin-6-ones

Alkylations of 4,5-dichloropyridazin-6-one (1) with dibromoalkanes 2 or 3 in the presence of potassium carbonate or tetrabutylammonium bromide/potassium hydroxide were investigated under restricted condition. Reactions of 1 with 2 or 3, except for 2b and 3b , in the presence of potassium carbonate or tetrabutylammonium bromide/potassium hydroxide gave only the N-alkylation products 3 and/or 4. Alkylation of 1 with 2b or 3b in the presence of potassium carbonate yielded the N-alkylation products 3b and/or 4b and the O-alkylation product 5 as the main product, whereas treatment of 1 with 2b or 3b in the presence of tetrabutylammonium bromide/potassium hydroxide afforded selectively the N-alkylation products 3b and/or 4b.     

The synthesis of naphthothiopyranopyranones and naphthothiopyranopyranthiones

The synthesis of fused tetracyclic naphthothiopyranopyranones from dihydronaphthothiopyranones I or II has been studied. Compounds I or II have been cyclised in good yield to the corresponding dioxaborin difluoride complexes III, IV, XIII and XIV by treatment with acetic or propionic anhydride and boron trifluoride etherate. These complexes and the Vilsmeier reagent reacted to produce fused tetracyclic 3-substituted naphthothiopyranopyranones V, VI, XV or XVI . The reaction of dioxaborin difluoride complexes III or IV with dimethylthioformamide (DMTF) afforded dimethylaminovinyldioxaborin difluoride complexes IX or X . Treatment of IX or X with hydrochloric acid solution gave naphthothiopyranopyranones VII or VIII . The reaction of VII, VIII, XV or XVI with DMTF/acetic anhydride yielded new products, which was identified as naphthothiopyranopyranthions XI, XII, XVII or XVIII .     

Alkenyl copper reagents—26 : Carbocupration of alkynes by organocopper reagents bearing a protected hydroxy or thiol function

Halohydrins, protected as ethers, acetals or chloro-magnesium alcoholates are sequentially transformed into the Li or Mg reagents and then into copper or cuprate derivatives. Addition to acetylene or propyne is discussed according to various parameters. The alkenyl copper or cuprate species, thus obtained, may react further with various electrophiles, leading to difunctionalized alkenes.     

Synthesis of 2'-deoxyadenosine nucleosides bearing bipyridine-type ligands and their Ru-complexes in position 8 through cross-coupling reactions

The synthesis of the title 2'-deoxyadenosine derivatives bearing bipyridine, phenanthroline or terpyridine ligands and their corresponding RuII-complexes in position 8 linked via acetylene or phenylene tethers was accomplished through cross-coupling reactions. The Suzuki-Miyaura reactions of boronic acids or the Sonogashira reactions of terminal acetylene derivatives of oligopyridine ligands were performed either on protected 8-bromoadenosines in organic solvents or, more efficiently, directly on unprotected nucleosides in aqueous acetonitrile or DMF. Direct cross-coupling reactions of unprotected nucleosides with RuII-complexes or the oligopyridine-boronic acids or -acetylenes gave the Ru-labelled nucleosides in one step in fair to good yields. This method was also proven to be applicable for direct Ru-labelling of dATP. Terpyridine-containing 2'-deoxyadenosine exerted significant antiviral and cytostatic effects.     

Structural evolution of anionic silicon clusters SiN (20 <or= N <or= 45)

Results of a combined photoelectron spectroscopy and first-principles density-functional study of SiN- clusters in the size range 20 or= 20. For 28 相似文献   

Mécanismes de Formation d'α-Aminophosphonates

When di-n-decylphosphonate 1a or di-benzylphosphite 1b are reacted with furan imine 2a or thiophenic imine 2b , the reaction leads to an f -aminophosphonate: 3a , 3b , or 3c following an ion- or radical-based reaction.     

Halogenation of Xanthenyl and Thioxanthenylallenes

Reactions of acids with vinylidenexanthenes (or thioxanthenes) 1 and 9-methoxy-9-vinylxanthenes (or thioxanthenes) 8 give xanthene- (or thioxanthene-) 9-spiro-1′-indenes 7 . With bromine or sulfuryl chloride they give the corresponding 2′-halogenoxanthene- (or thioxanthene-)9-spiro-1′-indenes 5 . Formation of such derivatives depends on preferential attack of the reagents on allenes 1 to give initially xanthylium (or thioxanthylium) ions 3 which cyclize. One π bond of the allenes 1 can be selectively reduced in acid media. Chemical and spectral evidence for these routes are presented.     

A synthesis of aromatic five- and six-membered B-N heterocycles via ring closing metathesis

The ring closing metathesis on appropriate vinyl or allyl aminoboranes (1 or 2) gives azaboracycloalkenes (3 or 4) which can be converted to azaborolides (5) or azaborines (6).     

Cascade cyclization intermolecular dipolar cycloaddition by multi-component couplings—synthesis of indolizidines and pyrrolizidines

A three-component coupling reaction of a primary amine (an amino-acid or amino-ester or hydroxylamine), an alkene or alkyne dipolarophile and an aldehyde bearing a halide as a leaving group has been developed. Condensation of the amine with the aldehyde and cyclization (intramolecular N-alkylation) provides, after decarboxylation or deprotonation, a cyclic azomethine ylide (or nitrone) that undergoes intermolecular dipolar cycloaddition with the dipolarophile. This sets up, in a single step, the bicyclic indolizidine or pyrrolizidine ring system, depending on the length of the tether between the aldehyde and the halide. The reaction is successful with stabilized and non-stabilized azomethine ylides that result from using primary amino-esters or amino-acids, respectively.