The TITAN mass measurement facility at TRIUMF-ISAC

The TITAN facility at TRIUMF-ISAC will use four ion traps with the primary goal of determining nuclear masses with high precision, particularly for short lived isotopes with lifetimes down to approximately 10 ms. The design value for the accuracy of the mass measurement is 1 ×10^???8. The four main components in the facility are an RF cooler/buncher (RFCT) receiving the incoming ion beam, an electron beam ion trap (EBIT) to breed the ions to higher charge states, a cooler Penning trap (CPET) to cool the highly charged ions, and finally the measurement Penning trap (MPET) for the precision mass determination. Additional goals for this system are laser spectroscopy on ions extracted from the RFCT and beta spectroscopy in the EBIT (in Penning trap mode) on ions that are purified using selective buffer gas cooling in the CPET. The physics motivation for the mass measurements are manifold, from unitarity tests of the CKM matrix to nuclear structure very far from the valley of stability, nuclear astrophysics and the study of halo-nuclei. As a first measurement the mass of ¹¹Li will be determined. With a lifetime of 8.7 ms and a demonstrated production rate of 4×10⁴ ions/sec at ISAC the goal for this measurement at TITAN is a relative uncertainty of 5×10^???8. This would check previous conflicting measurements and provide information for nuclear theory and models.     

A cooler ion trap for the TITAN on-line trapping facility at TRIUMF

We present simulations of electron and proton cooling of highly charged ions in a Penning trap, including the potentially detrimental effects of radiative, dielectronic, and three-body recombination in electron cooling. We show a preliminary design for a cooler trap accommodating both electron and proton cooling, which will be a component of the TITAN ion-trap facility under construction at TRIUMF for precision mass measurements of short-lived radioactive nuclei.      

First use of high charge states for mass measurements of short-lived nuclides in a Penning trap

Penning trap mass measurements of short-lived nuclides have been performed for the first time with highly charged ions, using the TITAN facility at TRIUMF. Compared to singly charged ions, this provides an improvement in experimental precision that scales with the charge state q. Neutron-deficient Rb isotopes have been charge bred in an electron beam ion trap to q=8-12+ prior to injection into the Penning trap. In combination with the Ramsey excitation scheme, this unique setup creating low energy, highly charged ions at a radioactive beam facility opens the door to unrivaled precision with gains of 1-2 orders of magnitude. The method is particularly suited for short-lived nuclides such as the superallowed β emitter 74Rb (T(1/2)=65 ms). The determination of its atomic mass and an improved Q(EC) value are presented.     

A high-current electron beam ion trap as an on-line charge breeder for the high precision mass measurement TITAN experiment

The precision of atomic mass measurements in a Penning trap is directly proportional to the charge state q of the ion and, hence, can be increased by using highly charged ions (HCI). For this reason, charge breeding with an electron beam ion trap (EBIT) is employed at TRIUMF’s Ion Trap for Atomic and Nuclear science (TITAN) on-line facility in Vancouver, Canada. By bombarding the injected and trapped singly charged ions with an intense beam of electrons, the charge state of the ions is rapidly increased inside the EBIT. To be compatible with the on-line requirements of short-lived isotopes, very high electron beam current densities are needed. The TITAN EBIT includes a 6 Tesla superconducting magnet and is designed to have electron beam currents and energies of up to 5 A and 60 keV, respectively. Once operational at full capacity, most species can be bred into a He-like configuration within tens of ms. Subsequently, the HCI are extracted, pass a Wien filter to reduce isobaric contamination, are cooled, and injected into a precision Penning trap for mass measurement. We will present the first results and current status of the TITAN EBIT, which has recently been moved to TRIUMF after assembly and commissioning at the Max-Planck-Institute (MPI) for Nuclear Physics in Heidelberg, Germany.     

TITAN: an ion trap for accurate mass measurements of ms-half-life nuclides

The introduction of Paul traps, in particular linear radio-frequency quadrupoles in the early 2000s, has revolutionized the use of ion traps for probing the properties of radioactive nuclides. It opened the path to trapping all available nuclides, independent of their chemical properties. We present an overview of direct mass measurements of short-lived nuclides using TITAN, a Penning trap mass spectrometer facility particularly suitable for precision measurements of ms-half-life nuclides.     

Direct mass measurement of the four-neutron halo nuclide 8He

A high-precision Penning trap mass measurement of the exotic 8He nuclide (T(1/2)=119 ms) has been carried out resulting in a reduction of the uncertainty of the halo binding energy by over an order of magnitude. The new mass, determined with a relative uncertainty of 9.2 x 10(-8) (deltam=690 eV) is 13 keV less bound than the previously accepted value. The mass measurement is of great relevance for the recent charge-radius measurement of 8He [P. Mueller, Phys. Rev. Lett. 99, 252501 (2007).10.1103/PhysRevLett.99.252501]. The 8He mass is the first result from the newly-commissioned Penning trap: TITAN (TRIUMF's Ion Trap for Atomic and Nuclear science) at the ISAC (Isotope Separator and Accelerator) radioactive beam facility at TRIUMF.     

Ion bunch stacking in a Penning trap after purification in an electrostatic mirror trap

The success of many measurements in analytical mass spectrometry as well as in precision mass determinations for atomic and nuclear physics is handicapped when the ion sources deliver “contaminations”, i.e., unwanted ions of masses similar to those of the ions of interest. In particular, in ion-trapping devices, large amounts of contaminant ions result in significant systematic errors—if the measurements are possible at all. We present a solution for such cases: The ions from a quasi-continuous source are bunched in a linear radio-frequency-quadrupole ion trap, separated by a multi-reflection time-of-flight section followed by a Bradbury–Nielsen gate, and then captured in a Penning trap. Buffer-gas cooling is used to damp the ion motion in the latter, which allows a repeated opening of the Penning trap for a stacking of mass-selected ion bunches. Proof-of-principle demonstrations have been performed with the ISOLTRAP setup at ISOLDE/CERN, both with ¹³³Cs⁺ ions from an off-line ion source and by application to an on-line beam of ¹⁷⁹Lu⁺ ions contaminated with ¹⁶³Dy¹⁶O⁺ ions. In addition, an optimization of the experimental procedure is given, in particular for the number of ion bunches captured as a function of the ions’ lifetimes and the parameters of the experiment .     

Observing a single hydrogen-like ion in a Penning trap at T = 4 K

We describe how a single hydrogen-like ion (C⁵⁺) is prepared, cooled with the method of resistive cooling and non-destructively detected with the image-current technique in a cryogenic Penning trap at T = 4 K. The storage time for C⁵⁺-ions in the cryogenically pumped vacuum chamber is longer than six months. The experimental techniques of preparing, cooling and detecting highly-charged ions in a Penning trap are relevant for precision experiments such as g-factor measurements, mass spectroscopy and laser spectroscopy. This revised version was published online in July 2006 with corrections to the Cover Date.     

The REX-ISOLDE project

The Radioactive Beam Experiment REX-ISOLDE [1–3] is a pilot experiment at ISOLDE (CERN) testing the new concept of post acceleration of radioactive ion beams by using charge breeding of the ions in a high charge state ion source and the efficient acceleration of the highly charged ions in a short LINAC using modern ion accelerator structures. In order to prepare the ions for the experiments singly charged radioactive ions from the on-line mass separator ISOLDE will be cooled and bunched in a Penning trap, charge bred in an electron beam ion source (EBIS) and finally accelerated in the LINAC. The LINAC consists of a radiofrequency quadrupole (RFQ) accelerator, which accelerates the ions up to 0.3 MeV/u, an interdigital H-type (IH) structure with a final energy between 1.1 and 1.2 MeV/u and three seven gap resonators, which allow the variation of the final energy. With an energy of the radioactive beams between 0.8 MeV/u and 2.2 MeV/u a wide range of experiments in the field of nuclear spectroscopy, astrophysics and solid state physics will be addressed by REX-ISOLDE. This revised version was published online in July 2006 with corrections to the Cover Date.     

Progress with the MPIK/UW-PTMS in Heidelberg

The precise determination of the ³He/³H mass ratio, and hence the tritium ??-decay endpoint energy E ₀, is of relevance for the measurement of the electron anti-neutrino mass performed by the Karlsruhe Tritium Neutrino experiment (KATRIN). By determining this ratio to an uncertainty of 1 part in 10¹¹, systematic errors of E ₀ can be checked in the data analysis of KATRIN. To reach this precision, a Penning Trap Mass Spectrometer was constructed at the University of Washington and has been transferred to the Max Planck Institute for Nuclear Physics in Heidelberg at the end of 2008. Since then it is called MPIK/UW-PTMS. Special design features are the utilization of an external ion source and a double trap configuration. The external Penning ion source efficiently ionizes the helium and tritium gas and can give superior elimination of unwanted ion species compared to the previously utilized in-trap-ionization by electrons from a field-emission point. The design as a double Penning trap allows a faster measurement procedure. This should help to avoid problems resulting from long-term drifts in the experimental conditions. Additionally, the laboratory in Heidelberg was carefully prepared to have very stable environmental conditions. Experimental challenges and the first Heidelberg results with the new spectrometer are presented.     

Laser spectroscopy methods for probing highly charged ions at GSI

We describe two opposite and partly complementary experimental approaches for performing high-precision laser spectroscopy of dipole-forbidden transitions in highly charged ions. We report on the wavelength determination of the ground state hyperfine transitions in hydrogen-like and lithium-like bismuth ions confined in the experimental storage ring at GSI. Direct comparison of the experimental results with theoretical predictions reveals an agreement of the specific hyperfine-structure splitting difference $\Delta ^{\prime }E$ within the 1- σ confidence interval of the experimental value. Additionally, we discuss an experimental strategy based on ion manipulation and cooling in a cylindrical open-endcap Penning trap to further increase the precision of the previous measurement. Trapping and laser cooling of external produced singly charged magnesium ions is demonstrated. This represents a first step towards sympathetic cooling of simultaneously confined ion species in order to perform laser spectroscopy measurements on highly charged ions nearly at rest. These measurements will offer new prospects in the field of laser-based tests of quantum electrodynamics in strong electric and magnetic fields.     

Recent developments in ion detection techniques for Penning trap mass spectrometry at TRIGA-TRAP

The highest precision in the determination of nuclear and atomic masses can be achieved by Penning trap mass spectrometry. The mass value is obtained through a measurement of the cyclotron frequency of the stored charged particle. Two different approaches are used at the Penning trap mass spectrometer TRIGA-TRAP for the mass determination: the destructive Time-Of-Flight Ion Cyclotron Resonance (TOF-ICR) technique and the non-destructive Fourier Transform Ion Cyclotron Resonance (FT-ICR) method. New developments for both techniques are described, which will improve the detection efficiency and the suppression of contaminations in the case of TOF-ICR. The FT-ICR detection systems will allow for the investigation of an incoming ion bunch from a radioactive-beam facility on the one hand, and for the detection of a single singly charged ion in the Penning trap on the other hand.     

New precision mass measurements of neutron-rich calcium and potassium isotopes and three-nucleon forces

We present precision Penning trap mass measurements of neutron-rich calcium and potassium isotopes in the vicinity of neutron number N=32. Using the TITAN system, the mass of ^{51}K was measured for the first time, and the precision of the ^{51,52}Ca mass values were improved significantly. The new mass values show a dramatic increase of the binding energy compared to those reported in the atomic mass evaluation. In particular, ^{52}Ca is more bound by 1.74?MeV, and the behavior with neutron number deviates substantially from the tabulated values. An increased binding was predicted recently based on calculations that include three-nucleon (3N) forces. We present a comparison to improved calculations, which agree remarkably with the evolution of masses with neutron number, making neutron-rich calcium isotopes an exciting region to probe 3N forces.     

Precision Penning trap mass measurements of rare isotopes produced by projectile fragmentation

The low-energy beam and ion trap facility LEBIT at NSCL/MSU is at present the only facility where precision experiments are performed with stopped rare isotope beams produced by fast-beam fragmentation. LEBIT combines high-pressure-gas stopping with advanced ion manipulation techniques to provide brilliant low-energy beams. So far these beams have mainly been used for mass measurements on short-lived rare isotopes with a 9.4T Penning trap mass spectrometer. Recent examples include ^70m Br , located at the proton dripline, ³²Si and the iron isotopes ^63-65Fe . While the measurement of ³²Si helps to solve a long-standing dispute over the validity of the isobaric multiplet mass equation (IMME) for the A = 32 , T = 2 multiplet, the mass measurements of ^65m,g Fe marked the first time a nuclear isomeric state has been discovered by Penning trap mass spectrometry.     

Numerical investigations on resistive cooling of trapped highly charged ions

The investigation of simple atomic systems in extreme electromagnetic fields with highest precision demands intense beams of heavy and highly charged ions to be decelerated and cooled to extremely low energies for long-time observation. Resistive cooling, i.e., the electronic dissipation of energy of a stored ion cloud on an external impedance, seems to be a good candidate for in-trap cooling of highly charged ions and has been chosen for the upcoming HITRAP (Highly charged Ion TRAP) facility at GSI, Darmstadt. Nevertheless, resistive cooling of large ensembles of ions confined in a Penning trap has never been thoroughly studied until now and the understanding of this highly nonlinear phenomenon is far from complete. Through the use of systematic simulations we give a proof of the feasibility of resistive cooling of large numbers of highly charged ions as well as the interpretation of some specific features observed experimentally.     

Space-Charge Effects with REXTRAP

The beam quality of radioactive ion beams produced by present target ion source technology is often not sufficient for direct post-acceleration. Furthermore, pulsed beams insure a more efficient use of an accelerator. In the case of REX-ISOLDE, the post accelerator at the CERN ISOLDE facility, a gas-filled Penning trap (REXTRAP) has been chosen for accumulation of the radioactive ions and conversion into cooled bunches. Radial centering of the ions is achieved by applying an rf field with a frequency equal to the cyclotron frequency of the desired ion species. The efficiency achieved in the first tests with different isotopes covering nearly the entire mass range was already >20%. Going to total numbers of >10⁵ stored ions in the trap a shift of the centering frequency could be observed, which is most likely due to space charge effects. Despite this, it was possible to accumulate up to 10⁷ ions and deliver them as cooled bunches. This revised version was published online in July 2006 with corrections to the Cover Date.     

The proposed Penning trap mass spectrometer facility at TASCC

The proposed Penning trap mass spectrometer, to be located at the TASCC facility of the Chalk River Laboratories, is described. The facility will be used for precise atomic mass determinations among both stable and unstable nuclides. The unstable nuclides would be produced in heavy ion reactions using the TASCC facility. The products from these reactions would be collected using an He-jet transport system loaded with NaCl aerosols. After transport to a background free area, the nuclides of interest would be laser desorbed and resonantly ionized. Subsequently, these ions would be accumulated in a Paul trap, cooled and injected into a precision Penning trap mass spectrometer for mass analysis.     

Status of the project TRAPSENSOR

Penning traps are used to perform very precise mass measurements on exotic and stable nuclei covering a variety of topics. In order to reach the highest accuracy, only one ion must be stored and measured in the trap. The mass is determined from the oscillation frequencies, by detecting the current the stored ion induces on the trap electrodes. This is a well-known technique demonstrated for ions with low or medium mass-to-charge ratios. Another technique recently proposed, and referred to as Quantum Sensor, aims at extending the applicability of single-ion Penning-trap measurements through the full atomic mass scale. The technique substitutes the electronic detection by the detection of fluorescence photons from a laser-cooled ion stored in a second Penning trap, thereafter this ion interacts with the ion of interest. The new device is under completion at the University of Granada (Spain) within the project TRAPSENSOR. This paper will present the status of this project.     

TITAN: An ion trap facility for on-line mass measurement experiments

Precision determinations of ground state or even isomeric state masses reveal fingerprints of nuclear structure. In particular, at the limits of existence for very neutron-rich or -deficient isotopes, one can extract detailed information about nuclear structure from separation energies or binding energies. Mass measurements are important to uncover new phenomena, to test new theoretical predictions, or to refine model approaches. For example, the N?=?28 shell has proven more stable than previously expected; however, the predicted new “magic” number at N?=?34 in the K and Ca isotopes has yet to be confirmed experimentally. For these neutron-rich nuclei, the inclusion of three-body forces leads to significantly better predictions of the ground-state mass. Similarly, halo nuclei present an excellent application for ab-initio theory, where ground state properties, like masses and radii, test our understanding of nuclear structure. Precision mass determinations at TRIUMF are carried out with the TITAN (TRIUMF’s Ion Traps for Atomic and Nuclear science) facility. It is an ion-trap setup coupled to the on-line facility ISAC. TITAN has measured masses of isotopes as short-lived as 9 ms (almost an order of magnitude shorter-lived than any other Penning trap system), and it is the only one with charge breeding capabilities, which allow us to boost the precision by almost 2 orders of magnitude. We recently made use of this feature by measuring short-lived, proton-rich Rb-isotopes, up to ⁷⁴Rb while reaching the 12?+ charge state, which together with other improvements led to an increase in precision by a factor 36.