Laser diode end-pumped passively Q-switched Tm,Ho:YLF laser with Cr:ZnS as a saturable absorber

Output performance of a continuous-wave (CW) laser diode end-pumped passively Q-switched Tm,Ho:YLF laser is demonstrated with a Cr:ZnS crystal as the saturable absorber. We particularly investigate the influence of saturable absorber's position in the resonator when the Cr:ZnS crystal is placed close to and far from the laser beam waist. We compare the experimental results at the two different positions, and find that the laser shows unusual output characteristics when the Cr:ZnS saturable absorber is placed close to the beam waist. The pulse width and the pulse energy almost keep constant, measured about 1.25 μs and 4 μJ respectively, when the pump power is changed in the range of 1–1.9 W. Moreover, the pulse repetition frequency can be tuned between 1.3 kHz and 2.6 kHz by changing the pump power. The output wavelength of the passively Q-switched laser shifts to 2053 nm from 2067 nm in CW operation.     

Comparison of RTP electro-optic Q-switch and acousto-optic Q-switch in Tm,Ho:GdVO<Subscript>4</Subscript> laser

We demonstrate a tunable, narrow linewidth, linearly polarized and gain-switched Cr²⁺:ZnSe laser pumped by a Tm, Ho:YVO₄ laser at 10 kHz pulse repetition frequency. By setting a quartz birefringent filter with a Brewster angle in the cavity, the linearly polarized Cr²⁺:ZnSe laser can be continuously tuned from 2.45 to 2.50 μm, and the output power was almost not changed. In addition, the linewidth was compressed to about 5 nm. At the incident pump power to the crystal of 14 W, the maximum output power of 2.84 W was obtained, corresponding to a slope efficiency of 20.4%.     

Passively Q-switched intracavity frequency-doubled Nd:LuVO<Subscript>4</Subscript>/LBO green laser with a Cr<Superscript>4+</Superscript>:YAG saturable absorber

This work presents experimental results concerning a passively Q-switched intracavity frequencydoubled Nd:LuVO₄/LBO green laser with a Cr⁴⁺:YAG saturable absorber operated at the wavelength of 0.53 μm. A maximal output power of 1.28 W was obtained at a pump power of 16.34 W, and peak power, pulse width as well as repetition frequency were 1.48 kW, 41 ns and 21 kHz, respectively.     

Passively Q-Switched Ho:SSO Laser by Use of a Cr~(2+):ZnSe Saturable Absorber

A cw operation and a passively Q-switched(PQS) Ho:SSO laser(Cr~(2+):ZnSe as a saturable absorber) end-pumped by a Tm:YAP laser operating at near room temperature are reported. It is the first time to report a PQS Ho:SSO laser. For the cw mode, a maximum cw output power of 3.0 W is obtained, corresponding to a slope effciency of31.4%. For the PQS mode, a Cr~(2+):ZnSe is used as the saturable absorber, with transmission of 88.4% at 2112 nm.A maximum pulse energy of 1.29 mJ is obtained, corresponding to the pulse repetition frequency of 2.42 kHz. In this study, we change the distance between:Cr~(2+):ZnSe and the output mirror to research the pulse characteristic of the PQS Ho:SSO laser. The minimum pulse width of 73.5 ns is obtained, corresponding to the pulse energy of0.9 mJ and the pulse repetition frequency of 2.65 kHz.     

Tunable,narrow linewidth,linearly polarized and gain-switched Cr<Superscript>2+</Superscript>:ZnSe laser

We demonstrate a tunable, narrow linewidth, linearly polarized and gain-switched Cr²⁺:ZnSe laser pumped by a Tm, Ho:YVO₄ laser at 10 kHz pulse repetition frequency. By setting a quartz birefringent filter with a Brewster angle in the cavity, the linearly polarized Cr²⁺:ZnSe laser can be continuously tuned from 2.45 to 2.50 μm, and the output power was almost not changed. In addition, the linewidth was compressed to about 5 nm. At the incident pump power to the crystal of 14 W, the maximum output power of 2.84 W was obtained, corresponding to a slope efficiency of 20.4%.     

Q-switched operation of <Emphasis Type="Italic">a</Emphasis>-cut Ho:YAlO<Subscript>3</Subscript> laser pumped by a diode-pumped 1.91 μm thulium laser

Q-switched operation of a room temperature Ho:YAP laser was resonantly end-pumped by a diode-pumped Tm:YLF laser at 1.91 μm. The CW Ho:YAP laser generated 9.9 W of linearly output at 2119.03 nm with beam quality factor of M ² ∼1.46 with respect to absorbed pump power of 19.16 W, corresponding to an optical-to-optical conversion efficiency of 51.7% and slope efficiency of 60.6%. Under Q-switched operation, the maximum output power of 9.8 W in relation to 10 kHz pulse repetition frequency (PRF) was obtained, however, the maximum peak power of 60 kW at the PRF of 5 kHz was demonstrated. At 5 kHz pulse energies of 1.92 mJ with pulse width of 32 ns was achieved.     

Passively Q-switched Tm,Ho:LuLiF4 laser with near constant pulse energy and duration

A compact diode-pumped passively Q-switched Tm,Ho:LuLiF₄ laser with a Cr:ZnS saturable absorber is demonstrated for the first time. The maximum average output power of 74 mW is achieved at the absorbed pump power of 1.5 W, and the threshold power is only 0.68 W. The laser operates at the wavelength of 2,055 nm and produces pulses with near constant duration of 1.2 μs and pulse energy of 13 μJ at the pulse repetition frequency from 1 to 5.2 kHz. The stable long-pulse laser can be used in laser lidar systems for accurate wind velocity measurements.     

Passively Q-switched GdVO<Subscript>4</Subscript>/Nd:GdVO<Subscript>4</Subscript> laser with Cr<Superscript>4+</Superscript>:YAG saturable absorber under direct 879 nm diode pumping to the emitting level

A passively Q-switched 1.06 μm laser with Cr⁴⁺:YAG saturable absorber by direct 879 nm diode pumping grown-together composite GdVO₄/Nd:GdVO₄ crystal to the emitting level was demonstrated in this paper. The characteristics of pulsed laser were investigated by using two kinds of Cr⁴⁺:YAG crystal with the initial transmissivity of 80 and 90%, respectively. When the T ₀ = 90% Cr⁴⁺:YAG was used, an average output power of 1.59 W was achieved at an incident pump power of 10 W. The pulse width and repetition rate were 64.5 ns and 170 kHz, respectively. The thermal lens effect of laser crystal was analyzed.     

Q-switched Ho:YAlO<Subscript>3</Subscript> laser pumped by Tm:YLF laser at room temperature

A Q-switched high efficient Ho:YAlO₃ (Ho:YAP) laser pumped by a diode-pumped Tm:YLF laser at room-temperature is realized. The maximum output energy reaches 1.58 mJ under the repetition frequency of 5 kHz, when the incident pump power is 15.6 W. The pulse width is 22 ns. The wavelength is 2118 nm when the transmission of output coupler is 30%. The beam quality factor is M ² ∼ 1.39 measured by the traveling knife-edge method.     

Efficient passively Q-switched Nd:YLF TEM00-mode laser at 1053 nm: selection of polarization with birefringence

The natural birefringence of the Nd:YLF crystal is utilized to achieve a reliable TEM₀₀-mode linearly polarized laser at 1053 nm in a compact concave-plano resonator. The efficient selection of the polarization relies on the combined effect of the difference in diffraction angle for ??- and ??-polarization of a wedged laser crystal and the alignment sensitivity of an optical resonator. We further employ a Cr⁴⁺:YAG saturable absorber to perform the passively Q-switched operation. At an incident pump power of 12?W, the maximum average output power is up to 2.3?W with a pulse repetition rate of 8?kHz and a pulse width of 9?ns. The pulse energy and peak power are found to be 288???J and 32?kW, respectively.     

Compact passively Q-switched green laser with periodically poled MgO:LiNbO<Subscript>3</Subscript>

Passively Q-switched green output with Cr⁴⁺:YAG as saturable absorber and PPMgLN as the frequency doubling crystal was realized in a compact diode end-pumped Nd:YVO₄ laser. The green light output power, pulse width, pulse repetition rate, pulse energy and peak power with three Cr⁴⁺:YAG of different initial transmissions were investigated. The maximum average output power was 1.2 W at the pump power of 4.0 W and the maximum conversion efficiency was 30% with the Cr⁴⁺:YAG of 90% initial transmission. The maximum pulse energy and minimum pulse width were 10.9 μJ and 12 ns with the Cr⁴⁺:YAG of 75% initial transmission.     

Passively Q-switched Nd:LuVO4 laser using Cr:YAG as saturable absorber

A passively Q-switched all solid-state Nd:LuVO₄ 1.06 μm laser was demonstrated by using Cr⁴⁺:YAG as saturable absorber. The characteristics of average output power, pulse width, repetition rate, pulse energy, and peak power were studied with different output couplings and initial transmission of saturable absorbers. When output coupling with the transmission of 20% was used, the shortest pulse width of 16 ns at the repetition rate of 12.5 kHz was obtained, which results in the pulse energy of 71 μJ and peak power of 4.43 kW with the initial transmission of 70% of Cr⁴⁺:YAG crystal.     

Narrow pulse width and high power passively Q-switched Nd3+:Gd3Ga5O12 laser with Cr4+:YAG saturable absorber

A compact, diode-pumped passively Q-switched Nd³⁺:Gd₃Ga₅O₁₂ (Nd:GGG) laser with Cr⁴⁺:YAG saturable absorber has been successfully demonstrated. Stable Q-switched pulses with pulse energy of 100 ??J and high peak power of 14 kW have been obtained. The pulse width was as short as 7 ns with low repetition rate of 10 kHz. The dependence of pulse width, pulse repetition rate, pulse energy and pulse peak power on pump power have been measured respectively. Experimental results reveal that the Nd:GGG crystal with Cr⁴⁺:YAG saturable absorber is suitable for narrow pulse width and high power passively Q-switched lasers.     

InGaAs/GaAs saturable absorber for diode-pumped passively Q-switched mode-locking of Tm:YAP laser

A passively Q-switched mode-locking of diode-pumped TmYAP laser by use of InGaAs/GaAs as a saturable absorber is reported. The maximum Q-switched mode-locking output power was 480 mW near the wavelength range of 1.94 μm with pulse repetition frequency of 26.47 kHz. The beam quality was also measured to be 1.12 ± 0.02.     

LD-pumped actively Q-switched Tm,Ho:YLF laser at room temperature

We have investigated acoustic-optical Q-switched Tm,Ho:YLF laser end-pumped by a laser-diode. At room temperature, a 2.067 μm wavelength pulsed output is realized. Average output power, single pulse energy and pulse-width are measured at different incident pump powers and pulse repetition frequencies. When the incident pump power is 2.8 W, a maximum average output power of 189 mW is obtained at the repetition frequency of 9 kHz, and this corresponds to an optical conversion efficiency of 6.8%. The maximum single pulse energy of 65μJ, the shortest pulse-width with full-width at half-maximum (FWHM) of 138 ns and the maximum peak power of 470 W are obtained at the pulse repetition frequency of 1 kHz.     

Q-switched operation of an in-band-pumped Ho:LuAG laser with kilohertz pulse repetition frequency

We report continuous-wave (CW) and repetitively Q-switched operation of an in-band-pumped Ho:LuAG laser at room temperature. End-pumped by a Tm:YLF solid-state laser with emission wavelength of 1.91 μm, the CW Ho:LuAG laser generated 5.4-W output at 2100.7 nm with beam quality factor of M ²～1.03 for an incident pump power of 14.1 W, corresponding to slope efficiency of 67% with respect to absorbed pump power. Up to 1.5-mJ energy per pulse at pulse repetition frequency (PRF) of 3 kHz and 4.5-W average power with FWHM pulse width of 28 ns at 5 kHz were demonstrated in repetitively Q-switched operation.     

Pulse characteristics of passively Q-switched 1.34 μm Nd:GdVO<Subscript>4</Subscript>/Co<Superscript>2+</Superscript>:MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> laser

Passively Q-switched output of a diode-pumped 1.34 μm Nd:GdVO₄ laser was demonstrated by using Co²⁺:MgAl₂O₄(Co²⁺:MALO) crystal as the saturable absorber for the first time. When the transmission of output mirror is 15%, the Q-switched pulse width is 110 ns and a corresponding average output power is 460 mW under the pump power of 9.69 W. The optical-optical conversion efficiency is 36%. At about 330 kHz repetition rate, the single Q-switched pulse energy and the peak power are about 1.39 μJ and 12.6 W, respectively.     

Diode-Pumped Passively Q-switched Single-Frequency Nd:YAG Lasers

Laser-diode pumped passively Q-switched single-frequency Nd:YAG laser has been demonstrated with a Cr⁴⁺:YAG crystal as the saturable absorber. When pumped with a fiber-coupled CW laser diode, the laser produces pulses of 1.4-20.9 ns duration, with a repetition rate of 1.9-52.0 kHz. The highest peak power of 17.6 kW was obtained at an incident pump power of 1.8 W. The use of a Cr⁴⁺:YAG saturable absorber enables the laser to operate not only in a single-frequency mode but also linearly polarized. The mode selection mechanism is discussed.     

Pulse width compression and enhancement of peak power in a diode-pumped doubly Q-switched Nd:GdVO<Subscript>4</Subscript> 1.34 μm laser with AO and V<Superscript>3+</Superscript>:YAG saturable absorber

By using both acousto-optic (AO) modulator and V³⁺:YAG saturable absorber, a diode-pumped doubly Q-switched a-cut Nd:GdVO₄ laser at 1.34 μm is realized. The average output power and the pulse width for different AO repetition rate f have been measured. The experimental results show that the doubly Q-switched laser can compress the pulse width and improve the pulsed peak power in comparison to the singly Q-switched laser with AO or V³⁺:YAG saturable absorber. At the pump power 10.34 W and f = 10 kHz, the greatest pulse width compression ratio 72% and the highest peak power improvement 8.8 times have been obtained, respectively.     

Laser performance of Nd:LaB3O6 cleavage microchips passively Q-switched with a Cr4+:YAG saturable absorber

Passively Q-switched laser oscillation at 1060 nm from an unprocessed Nd:LaB₃O₆ cleavage microchip with a Cr⁴⁺:YAG saturable absorber has been demonstrated. The influence of absorbed pump power, output coupler transmission and cavity length on the output pulse characteristics has been investigated. For a plano-concave cavity with a cavity length of 28 mm, pulse with 100 mW average output power, 4.0 μJ energy, 17 ns duration, 25 kHz repetition rate, and 0.24 kW, peak power was obtained at the absorbed pump power of 1.42 W and output coupler transmission of 3.5%. For a plano-plano cavity with a cavity length of 5 mm, pulse with 85 mW average output power, 2.1 μJ energy, 2.3 ns duration, 40 kHz repetition rate, and 0.89 kW, peak power was obtained at the absorbed pump power of 1.42 W and output coupler transmission of 5.6%. Because a chopper with a 5% duty cycle was employed in the experiments to reduce the influence of pump-induced thermal loading, the above average output powers were obtained at the 5% duty cycle and extrapolated to 100%.PACS 42.55.Rz; 42.60.Gd; 42.70.Hj