Asymmetric epoxidation of 6-cyano-2,2-dimethylchromene on Mn(salen) catalyst immobilized in mesoporous materials

This article reports our recent work on the heterogeneous asymmetric epoxidation catalyzed by chiral Mn(salen) catalyst axially immobilized via phenoxyl groups and organic sulfonic groups. The asymmetric epoxidation of 6-cyano-2,2-dimethylchromene was especially presented in detail. The factors that affected the asymmetric induction, such as the nanopores and the external surface, the linkage length, and the modification of nanopores with methyl groups were discussed. It was found that the enantioselectivities increased with decreasing the nanopore sizes or increasing the linkage length in nanopore, and the Mn(salen) catalyst immobilized into nanopores generally gave higher ee values than those on the external surface. The heterogeneous Mn(salen) catalysts with modified nanopores gave a TOF of 14.8 h⁻¹ and an ee value of 90.6% for the asymmetric epoxidation of 6-cyano-2,2-dimethylchromene, which were higher than the results (TOF 10.8 h⁻¹, ee 80.1%) obtained for the homogeneous catalyst.     

An efficient hybrid, nanostructured, epoxidation catalyst: titanium silsesquioxane-polystyrene copolymer supported on SBA-15

A novel interfacial hybrid epoxidation catalyst was designed with a new immobilization method for homogeneous catalysts by coating an inorganic support with an organic polymer film containing active sites. The titanium silsesquioxane (TiPOSS) complex, which contains a single-site titanium active center, was immobilized successfully by in-situ copolymerization on a mesoporous SBA-15-supported polystyrene polymer. The resulting hybrid materials exhibit attractive textural properties (highly ordered mesostructure, large specific surface area (>380 m2 g-1) and pore volume (>or==0.46 cm3 g-1)), and high activity in the epoxidation of alkenes. In the epoxidation of cyclooctene with tert-butyl hydrogen peroxide (TBHP), the hybrid catalysts have rate constants comparable with that of their homogeneous counterpart, and can be recycled at least seven times. They can also catalyze the epoxidation of cyclooctene with aqueous H2O2 as the oxidant. In two-phase reaction media, the catalysts show much higher activity than their homogeneous counterpart due to the hydrophobic environment around the active centers. They behave as interfacial catalysts due to their multifunctionality, that is, the hydrophobicity of polystyrene and the polyhedral oligomeric silsesquioxanes (POSS), and the hydrophilicity of the silica and the mesoporous structure. Combination of the immobilization of homogeneous catalysts on two conventional supports, inorganic solid and organic polymer, is demonstrated to achieve novel heterogeneous catalytic ensembles with the merits of attractive textural properties, tunable surface properties, and optimized environments around the active sites.     

Covalent heterogenization of a discrete Mn(II) bis-phen complex by a metal-template/metal-exchange method: an epoxidation catalyst with enhanced reactivity

Considerable attention has been devoted to the immobilization of discrete epoxidation catalysts onto solid supports due to the possible benefits of site isolation such as increased catalyst stability, catalyst recycling, and product separation. A synthetic metal-template/metal-exchange method to imprint a covalently attached bis-1,10-phenanthroline coordination environment onto high-surface area, mesoporous SBA-15 silica is reported herein along with the epoxidation reactivity once reloaded with manganese. Comparisons of this imprinted material with material synthesized by random grafting of the ligand show that the template method creates more reproducible, solution-like bis-1,10-phenanthroline coordination at a variety of ligand loadings. Olefin epoxidation with peracetic acid shows the imprinted manganese catalysts have improved product selectivity for epoxides, greater substrate scope, more efficient use of oxidant, and higher reactivity than their homogeneous or grafted analogues independent of ligand loading. The randomly grafted manganese catalysts, however, show reactivity that varies with ligand loading while the homogeneous analogue degrades trisubstituted olefins and produces trans-epoxide products from cis-olefins. Efficient recycling behavior of the templated catalysts is also possible.     

Novel ways of Mn-Salen complex immobilization on modified silica support and their catalytic activity in cyclooctene epoxidation

The covalent immobilization of Mn(III)-Salen complexes on an amorphous mesoporous silica support is reported. Both (3-aminopropyl)trimethoxysilane (APTMS) and (3-iodopropyl)trimethoxysilane (IPTMS) were used in a post-synthesis grafting method to prepare organosilane-modified porous materials. Peptide and ester interactions were employed to anchor the Salen complex to the silica framework. The catalytic activity of the immobilized Salen catalyst was studied by epoxidation of cyclooctene. The comparison of the homogeneous and the immobilized catalyst shows that there was no significant loss of catalytic activity for epoxidation by immobilization. In the current study, the effects of reaction temperatures, solvents, and amount of catalyst on the catalytic activity were investigated. The optimal yield of cyclooctene oxide was obtained at 45°C using toluene as the solvent. Published in Russian in Kinetika i Kataliz, 2007, Vol. 48, No. 1, pp. 185–191. This article was submitted by the authors in English.     

Catalytic olefin epoxidation with cyclopentadienyl-molybdenum complexes in room temperature ionic liquids

Complexes of the type (η⁵-C₅R₅)Mo(CO)₃X (X = Me, Cl; R = H, Me), being efficient homogeneous catalysts for the epoxidation of olefins, have been examined for their catalytic performance at 55 °C in systems containing room temperature ionic liquids (RTILs) of composition [BMIM]NTf₂, [BMIM]PF₆, [C₈MIM]PF₆ and [BMIM]BF₄. The catalytic performance for cyclooctene epoxidation depends strongly on the water content of the system, the catalyst solubility in the RTIL, and the reaction behaviour of the RTIL under the applied reaction conditions. The catalysts can be recycled without significant loss of activity when a reaction system containing [BMIM]NTf₂ and [BMIM]PF₆ in a 4:1 relationship is used. High proportions of [BMIM]PF₆ lead to a ring opening reaction (diol formation), due to HF formation and the presence of residual water.     

A new heterogeneous chiral (salen)manganese(III) system for enantioselective epoxidation of non‐functionalized olefins

This communication describes the design and application of a novel catalytic epoxidation system derived from the initial immobilization of a homogeneous sulfonato (salen)Mn(III) complex on two solid carriers (silica gel and siliceous earth) and subsequent dispersion of the supported manganese complexes into ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMImPF₆) and 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMImBF₄) for recycling. The performance of chiral (salen)Mn(III) system in enantioselective epoxidation of olefins was investigated systematically. Even higher enantioselectivity than that of the homogeneous counterpart was obtained with similar catalytic activity. In particular, the best catalytic result is that the combination of the silica gel‐supported (salen)Mn(III) catalyst and BMImPF₆ affords 97–100% ee for epoxidation of α‐methylstyrene, and high ee values were retained even after three cycles. Copyright © 2010 John Wiley & Sons, Ltd.     

Oxovanadium(IV) and dioxomolybdenum(VI) salen complexes tethered onto amino-functionalized SBA-15 for the epoxidation of cyclooctene

Oxovanadium(IV) and dioxomolybdenum(VI) salen complexes were firstly tethered onto amino-functionalized mesoporous SBA-15 materials by a stepwise procedure and were screened as catalysts for the epoxidation of cyclooctene. The mesoporous structural integrity throughout the tethering procedure, the successful tethering of the organometallic complexes, the loadings of metal ions and organic ligands as well as the catalyst surface constitution and location of active organometallic species on the SBA-15 support were determined by comprehensive characterization techniques such as XRD, N₂ adsorption/desorption, FT-IR, UV–vis spectroscopy, ICP-AES, XPS and TG/DTA. Catalytic properties in the epoxidation of cyclooctene demonstrate that both tethered oxovanadium(IV) and dioxomolybdenum(VI) catalysts were more active than their respective homogeneous analogue, and the tethered oxovanadium(IV) complex showed the best activity (64.3%) with H₂O₂ as the oxidant and CH₃CN as the solvent.     

Homogeneous and heterogeneous olefin epoxidation catalyzed by a binuclear Mn(II)Mn(III) complex

The synthesis and characterization of a binuclear carboxylated bridged manganese complex containing the heptadentate ligand N,N′-bis(2-hydroxybenzyl)-N,N′-bis(2-methylpyridyl)-2-ol-1,3-propanediamine (H₃bbppnol) is reported. This complex was characterized by elemental analysis; infrared, electronic (UV–vis) and EPR spectroscopy; and conductivity measurements. The complex was immobilized on silica by either adsorption or entrapment via a sol–gel route. The obtained solids were characterized by thermogravimetric analyses (TG and DSC), UV–vis and infrared spectroscopy, and X-ray diffraction. The catalytic performance of the binuclear manganese complex in epoxidation reactions was evaluated for both homogeneous and heterogeneous systems. The catalytic investigation revealed that the complex performs well as an epoxidation catalyst for the substrates cyclohexene (26–39%) and cyclooctene (29–74%). The solids containing the immobilized complex can be recovered from the reaction medium and reused, maintaining good catalytic activity.     

New chloro and triphenylsiloxy derivatives of dioxomolybdenum(VI) chelated with pyrazolylpyridine ligands: Catalytic applications in olefin epoxidation

Dioxomolybdenum(VI) complexes of general formula [MoO₂X₂L₂] (X = Cl, OSiPh₃; L₂ = 2-(1-butyl-3-pyrazolyl)pyridine, ethyl[3-(2-pyridyl)-1-pyrazolyl]acetate) were prepared and characterised by ¹H NMR, IR and Raman spectroscopy. The assignment of the vibrational spectra was supported by ab initio calculations. A single crystal X-ray diffraction study of the complex [MoO₂Cl₂{ethyl[3-(2-pyridyl)-1-pyrazolyl]acetate}] showed that the compound is monomeric and crystallises in the tetragonal system with space group P4₁. The four complexes are active and selective catalysts for the liquid-phase epoxidation of olefins by tert-butylhydroperoxide. Selectivities to the corresponding epoxides were mostly 100% (for conversions of at least 34%) for the substrates cyclooctene, cyclododecene, 1-octene, trans-2-octene and (R)-(+)-limonene. For styrene epoxidation, the corresponding diol was also formed in significant quantities. The turnover frequencies for cyclooctene epoxidation at 55 °C were around 340 mol mol_Mo⁻¹ h⁻¹ for the chloro complexes and 160 mol mol_Mo⁻¹ h⁻¹ for the triphenylsiloxy complexes. The addition of co-solvents (1,2-dichloroethane or n-hexane) had a detrimental effect on catalytic activities. Kinetic studies for the two complexes bearing the ligand ethyl[3-(2-pyridyl)-1-pyrazolyl]acetate revealed an apparent first order dependence of the initial rate of cyclooctene conversion with respect to cyclooctene or oxidant concentration.     

Catalytic dehydrogenation of cyclooctane with neutral iridium(I) complexes

A series of new 1,5-cyclooctadiene iridium(I) complexes with chelating ligands has been synthesized. The ligands are naphthoxyimines, carboxylates and alcoholates. The complexes catalyze the homogeneous dehydrogenation of cyclooctane to give cyclooctene and hydrogen without an external hydrogen acceptor up to rates of 75 turnovers. The catalysts are active for at least 48 h at a temperature of 300 °C. The ligand structure has an influence on the activity and selectivity of the corresponding catalysts.     

Biomimetic transfer hydrogenation of 2-alkoxy- and 2-aryloxyketones with iron-porphyrin catalysts

In situ generated iron porphyrins are applied as homogeneous catalysts in the transfer hydrogenation of α-substituted ketones. Using 2-propanol as hydrogen donor various protected 1,2-hydroxyketones are reduced to the corresponding mono-substituted 1,2-diols in good to excellent yield. Under optimized reaction conditions catalyst turnover frequencies up to 2500 h⁻¹ have been achieved.     

Schiff base‐functionalized boehmite nanoparticle‐supported molybdenum and vanadium complexes: efficient catalysts for the epoxidation of alkenes

Boehmite nanoparticles, with high surface area and high degree of surface hydroxyl groups, were prepared via hydrothermal‐assisted sol–gel processing of aluminium 2‐butoxide. The produced powder was covalently functionalized with 3‐(trimethoxysilyl)propylamine, and then, in order to support vanadium oxosulfate and molybdenum hexacarbonyl complexes, all the terminal amine groups were changed to Schiff bases by refluxing with salicylaldehyde. These catalysts were applied in the epoxidation of cis‐cyclooctene and other olefins with tert‐BuOOH in CCl₄. The catalytic procedures for both catalysts were optimized for various parameters such as solvent and oxidant. Recycling experiments revealed that these heterogeneous nano‐catalysts could be repeatedly applied for the epoxidation of alkenes. Copyright © 2015 John Wiley & Sons, Ltd.     

Biomimetic transfer hydrogenation of ketones with iron porphyrin catalysts

For the first time in situ generated iron porphyrins have been applied as homogeneous catalysts for the transfer hydrogenation of ketones. Using 2-propanol as hydrogen source various ketones are reduced to the corresponding alcohols in good to excellent yield and selectivity. Under optimized reaction conditions high catalyst turnover frequencies up to 642 h⁻¹ are achieved.     

Encapsulation of a chiral MnIII(salen) complex in ordered mesoporous silicas: an approach towards heterogenizing asymmetric epoxidation catalysts for non-functionalized alkenes

Two immobilized chiral Mn^III(salen) complexes covalently anchored on modified MCM-41 (50 Å) and SBA-15 (75 Å) were prepared using 3-aminopropyltriethoxysilane as a reactive surface modifier to afford comparable or even higher enantioselectivity than homogeneous catalysts for the enantioselective epoxidation of a series of smaller to bulkier alkenes. The catalyst immobilized in silica with larger pore diameters was found to be more active. Compared to homogeneous catalysts, the heterogenized catalysts are more stable and can be recycled four times with retention of enantioselectivity.     

Epoxidation of cyclooctene by host (nanocavity of zeolite-Y) guest (copper(II) complexes with 16- and 17-membered diaza dioxa macrocyclic Schiff bases) nanocomposite materials

This work reports the synthesis and characterization of macrocyclic copper(II) complexes encapsulated within the nanopores of zeolite-Y. The obtained nanoparticles entrapped in the nanopores of zeolite have been characterized by FT-IR, UV–Vis, Diffuse reflectance spectra, spectroscopic techniques, molar conductance, magnetic moment data, XRD, thermal, and elemental analysis. The complexes (neat and encapsulated) were used for the oxidation of cyclooctene with tert-butyl hydroperoxide as oxidant in different solvents. The supported Cu[L₁]²⁺-Y exhibited a moderate 81.9% selectivity for epoxidation with 84.2% conversion. The catalytic activity and selectivity of the heterogeneous catalysts do not change after recycling five times.     

Two hydrogen-bond-cross-linked molybdenum (VI) network polymers: synthesis, crystal structures and cyclooctene epoxidation with H2O2

Two molybdenum (VI) hydrogen-bonded network polymers [MoO₂F₄]·(4,4′-H₂bpd)(H₂O)₂ (1) and [MoO₂Cl₃(H₂O)]·(4,4′-H₂bpd)Cl (2) (bpd = bipiperidine) have been synthesized and examined as catalysts for epoxidation of cyclooctene. Complexes of the Mo compounds containing the bpd ligand are prepared and characterized by infrared spectroscopy, thermogravimetric and elemental analyses. They have been structurally characterized by single crystal X-ray diffraction analysis. The structures of both the complexes are shown to be comprised of molybdenum and two protonated N-ligand cations that have resulted in a cross-linked hydrogen-bonded network structure. These complexes are applicable as catalysts for the cis-cyclooctene epoxidation reactions with hydrogen peroxide as a source of oxygen and NaHCO₃ as a cocatalyst. It has been observed that the formation of the oxidant peroxymonocarbonate ion, HCO₄ ⁻ by hydrogen peroxide and bicarbonate enhances the epoxidation reaction. Both the complexes have exhibited a good activity and a very high selectivity for the formation of cyclooctene oxide. An erratum to this article can be found at     

Flow injection analysis-flame atomic absorption spectrometry system for indirect determination of cyanide using cadmium carbonate as a new solid-phase reactor

A new and simple flow injection system procedure has been developed for the indirect determination of cyanide. The method is based on insertion of aqueous cyanide solutions into an on-line cadmium carbonate packed column (25% m/m suspended on silica gel beads) and a sodium hydroxide with pH 10 is used as the carrier stream. The eluent containing the analyte as cadmiumcyanide complexes, produced from reaction between cadmium carbonate and cyanide, measured by flame atomic absorption spectrometry. The absorbance is proportional to the concentration of cyanide in the sample. The linear range of the system is up to 15 mg L⁻¹ with a detection limit 0.2 mg L⁻¹ and sampling rate 72 h⁻¹. The method is suitable for determination of cyanide in industrial waste waters with a relative standard deviation better than 1.22%.     

SBA‐15‐supported N‐coordinate ruthenium(II) materials bearing sulfonamide‐type ligands: Effect of ligand backbones on catalytic transfer hydrogenation of ketones and aldehydes

[RuLCl(p ‐cymene)] (L = N ‐arylsulfonylphenylenediamine) complexes ( 2 _{a – d} ) were synthesized from the reaction between [Ru(p ‐cymene)Cl₂]₂ and ligand. Additionally, SBA‐15–[RuLCl(p ‐cymene)] derived catalysts ( 3 _{a – d} ) were successfully immobilized onto mesoporous silica (SBA‐15) by an easily accessible approach. The structural elucidations of 2 _{a – d} and 3 _{a – d} were carried out with various methods such as ¹H NMR, ¹³C NMR and infrared spectroscopies, elemental analysis, thermogravimetric/differential thermal analysis, nitrogen adsorption–desorption and scanning electron microscopy/energy‐dispersive X‐ray analysis. The Ru(II) complexes and materials were found to be highly active and selective catalysts for the transfer hydrogenation (TH) reaction of aldehydes and ketones. The influence of various 1,2‐phenylenediamines on the reactivity of the catalysts (complexes or materials) was studied and the catalysts ( 2 _d and 3 _d ) with a 4,5‐dichlorophenylenediamine substituent showed the best activity (the maximum turnover frequencies are 2916 and 2154 h⁻¹ for TH of 4‐fluoroacetophenone, and 6000 and 4956 h⁻¹ for TH of 4‐chlorobenzaldehyde).     

Preparation and characterization of Fe3O4@Boehmite core‐shell nanoparticles to support molybdenum or vanadium complexes for catalytic epoxidation of alkenes

Fe₃O₄ core nanoparticles were prepared via a solvothermal process, and then they were covered with a surface hydroxyl‐rich boehmite shell via the hydrothermal‐assisted sol–gel processing of aluminum 2‐propoxide. The outer surface of the boehmite shell was subsequently covalently functionalized with 3‐(tri‐methoxysilyl)‐propylamine or 3‐(tri‐methoxysilyl)‐propyl chloride, and the terminal chlorine groups were treated with imidazole. These compounds were used to support the hexa‐carbonyl molybdenum and oxo‐sulfato vanadium (IV) complexes. The supported catalysts were characterized by the FT‐IR, CHN, ICP, and TEM analysis techniques. They were then used in the epoxidation of cis‐cyclooctene. The catalytic procedures were optimized for different parameters such as the solvent, oxidant, and temperature. The reaction progress was investigated by the gas–liquid chromatography analysis. The catalysts used were simply recovered from the solution by applying a magnet, and recycling the experiments revealed that the heterogeneous nanocatalysts could be repeatedly used for the epoxidation of cis‐cyclooctene. The optimized conditions were also successfully used for the epoxidation of some other alkenes.     

Pore tuned activated carbons as supports for an enantioselective molecular catalyst

The Jacobsen catalyst was immobilized onto four activated carbons with different average pore sizes, achieved by a gasification process followed by molecular oxygen oxidation. The influence of the textural properties of the activated carbon in the immobilization process and in the catalytic performance of the Mn(III) heterogeneous catalysts was investigated in detail. Three different catalytic systems were studied: styrene epoxidation using m-chloroperoxybenzoic acid; 6-CN-2,2-diMeChromene epoxidation using NaOCl and iodosylbenzene (PhIO) as oxidants. The catalysts tested were active and enantioselective in the three systems studied. Selectivity towards the desired epoxide only decreases in the case of the material with smaller pores, remaining identical to that of the homogeneous phase in all the other materials. The enantiomeric excess values (%ee) for alkene epoxidation increase with the pore size of the heterogeneous catalysts, and these values are even higher than the homogeneous counterparts in the styrene epoxidation reaction. Total Mn(III) loadings increase with the pore size, as well as their distribution within the carbon porous matrix. Characterization of the activated carbons bearing the immobilized manganese(III) complexes by TPD and XPS point to reaction between carbon surface phenolate groups and the manganese(III) complexes through axial coordination of the metal centers to these groups.