Stereoselective synthesis of (6S)-5,6-dihydro-6-[(2R)-2-hydroxy-6-phenylhexyl]-2H-pyran-2-one

A stereoselective synthesis of (6S)-5,6-dihydro-6-[(2R)-2-hydroxy-6-phenylhexyl]-2H-pyran-2-one is reported. The strategy utilizes an olefin cross-metathesis, syn-benzylidene acetal formation and a preferential (Z)-Wittig olefination reaction and lactonization as the key steps.     

Synthesis of degradable poly(methyl methacrylate) star polymers via RAFT copolymerization with cyclic ketene acetals

Copolymerization of the cyclic ketene acetal 5,6‐benzo‐2‐methylene‐1,3‐dioxepane (BMDO) with methyl methacrylate (MMA) is studied with respect to its copolymerization parameters and the suitability to control BMDO/MMA copolymerizations via the reversible addition‐fragmentation chain transfer (RAFT) technique to obtain linear and 4‐arm star polymers. BMDO shows disparate copolymerization behavior with MMA and r₁ = 0.33 ± 0.06 and r₂ = 6.0 ± 0.8 have been determined for polymerization at 110 °C in anisole from fitting copolymer composition vs. comonomer feed data to the Lewis–Mayo equation. Copolymerization of the two monomers is successful in RAFT polymerization employing a trithiocarbonate control agent. As desired, polymers contain only little amount of polyester units stemming from BMDO units and preliminary degradation experiment show that the polymer degrades slowly, but steadily in aqueous 1 M NaOH dispersion. Within ten days, the polymers are broken down to low molecular weight segments from an initial molecular weight of M_n = 6000 g mol^?1. Star (co)polymerization with an erythritol‐based tetra‐functional RAFT agent following the Z‐group approach proceeds efficiently and polymers with a number‐average molecular weight of 10,000 g mol^?1 are readily obtained that degrade in similar manner as the linear copolymer counterparts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1633–1641     

Investigation of reaction of dimedone and ethyl acetoacetate with 1,2-epoxy-3-chloropropane

Reactions of dimedone and ethyl acetoacetate with 1,2-epoxy-3-chloropropane in the presence of K₂CO₃ in DMSO medium were investigated. The reaction of 1,2-epoxy-3-chloropropane with ethyl acetoacetate afforded ethyl 5-hydroxy-2-methyl-5,6-dihydro-4H-pyran-3-carboxylate, with dimedone, 3-(1′,2′-epoxypropyloxy)-5,5-dimethyl-cyclohex-2-en-1-one.     

Studies on the role of Lewis basicity of the aldehydes utilized in the enantioselective Mukaiyama aldol reaction promoted by chiral 1,3,2-oxazaborolidin-5-ones

N-Tosyl-2-1,3,2-oxazaborolidin-5-one 1 was used to probe the role of the Lewis basicity of aldehydes utilized in Mukaiyama aldol reactions promoted by oxazaborolidin-5-ones. Eight aldehydes were each allowed to undergo a Mukaiyama aldol reaction with ketene silyl acetal derived from methyl isobutanoate. Lewis basicity of the aldehydes was determined computationally. The best results were obtained with isobutyl aldehyde and 3,4,5-trimethoxy benzaldehyde (91% and 85% ee). The best fit of ee as a function of Lewis basicity gave a correlation of R²=0.79 [when two ortho-substituted aldehydes were excluded] suggesting that Lewis basicity of O_CHO can play a role in reactions of aldehydes promoted by 1.     

Visible light‐induced RAFT polymerization of methacrylates with benzaldehyde derivatives as organophotoredox catalysts

The benzaldehyde derivatives, such as 2,4‐dimethoxy benzaldehyde (PC1) and p‐anisaldehyde (PC2), were successfully used as photoredox catalysts (PCs) in combination with typical RAFT agent 4‐cyano‐4‐(phenylcarbonothioylthio)pentanoic acid (CTP) for the controlled photoinduced electron transfer RAFT polymerization (PET‐RAFT) of methyl methacrylate (MMA) and benzyl methacrylate (BnMA) at room temperature. The kinetics of the polymerizations showed first order with respect to monomer conversions. Besides, the average number molecular weights (M_n) of the produced polymers increased linearly with the monomer conversions and kept relatively narrow polydispersity (PDI = M_w/M_n). For example, the M_n of PMMA increased from about 3400 to 17,300 g mol⁻¹ with the increasing in monomer conversion from 11% to 85%, and the PDI maintained around 1.36. The living features of polymerizations with the PC1 and PC2 as catalysts have also been further supported by chain extension and synthesis of PMMA‐b‐PBnMA diblock copolymer. As a result, the simplicity and efficiency of benzaldehyde derivatives catalyzed PET‐RAFT polymerization have been demonstrated under mild conditions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 229–236     

Coupling Reaction of Enol Derivatives with Silyl Ketene Acetals Catalyzed by Gallium Trihalides

A cross‐coupling reaction between enol derivatives and silyl ketene acetals catalyzed by GaBr₃ took place to give the corresponding α‐alkenyl esters. GaBr₃ showed the most effective catalytic ability, whereas other metal salts such as BF₃?OEt₂, AlCl₃, PdCl₂, and lanthanide triflates were not effective. Various types of enol ethers and vinyl carboxylates as enol derivatives are amenable to this coupling. The scope of the reaction with silyl ketene acetals was also broad. We successfully observed an alkylgallium intermediate by using NMR spectroscopy, suggesting a mechanism involving anti‐carbogallation among GaBr₃, an enol derivative, and a silyl ketene acetal, followed by syn‐β‐alkoxy elimination from the alkylgallium. Based on kinetic studies, the turnover‐limiting step of the reaction using a vinyl ether and a vinyl carboxylate involved syn‐β‐alkoxy elimination and anti‐carbogallation, respectively. Therefore, the leaving group had a significant effect on the progress of the reaction. Theoretical calculations analysis suggest that the moderate Lewis acidity of gallium would contribute to a flexible conformational change of the alkylgallium intermediate and to the cleavage of the carbon?oxygen bond in the β‐alkoxy elimination process, which is the turnover‐limiting step in the reaction between a vinyl ether and a silyl ketene acetal.     

Facile synthesis for well‐defined A2B miktoarm star copolymer of poly(3‐hexylthiophene) and poly(methyl methacrylate) by the combination of anionic polymerization and click reaction

We have introduced a facile synthetic route for well‐defined A₂B miktoarm star copolymer composed of regioregular poly(3‐hexylthiophene) and poly(methyl methacrylate) ((P3HT)₂PMMA) by the combination of anionic polymerization and click reaction. First, we synthesized PMMA terminated with 1,3,5‐tris(bromomethyl)benzene (PMMA‐(Br)₂) by anionic polymerization, and two bromines attached to the end of the PMMA chains were replaced by azides (PMMA‐(N₃)₂). Also, monoethynyl‐capped P3HT was synthesized by Grignard metathesis polymerization and post‐end functionalization. Then, copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition click reaction between monoethynyl‐capped P3HT and PMMA‐(N₃)₂ was performed to synthesize (P3HT)₂PMMA. We used a slightly excess amount of monoethynyl‐capped P3HT so that all of the azide groups at the end of the PMMA chains completely reacted with monoethynyl‐capped P3HT. After complete removal of unreacted monoethynyl‐capped P3HT by column chromatography, pure (P3HT)₂PMMA with narrow molecular weight distribution (the polydispersity of 1.18) was obtained. The weight fraction of P3HT and the total molecular weight of (P3HT)₂PMMA are 0.48 and 16,000, respectively. To investigate the effect of the chain architecture on optical property and thin‐film morphology, we synthesized two linear P3HT‐b‐PMMAs (P3HT‐b‐PMMA‐L and P3HT‐b‐PMMA‐H) with similar weight fraction of P3HT block (0.48 for P3HT‐b‐PMMA‐L and 0.45 for P3HT‐b‐PMMA‐H) but two different total molecular weights (7900 for P3HT‐b‐PMMA‐L and 15,300 for P3HT‐b‐PMMA‐H). UV–visible (UV–vis) absorption spectrum and the fibril width of (P3HT)2PMMA thin film were similar to those of P3HT‐b‐PMMA‐L thin film. However, UV–vis spectrum for P3HT‐b‐PMMA‐H thin film was red‐shifted and the fibril width of P3HT‐b‐PMMA‐H was much larger than that of (P3HT)₂PMMA. This indicates that the π–π interaction between P3HT arms in (P3HT)₂PMMA is strong enough to arrange two P3HT backbone chains in (P3HT)₂PMMA to stack one by one along the nanofibril axis. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Chemical composition effects on the fracture of polystyrene-block-poly(methyl methacrylate)block copolymers

The crazing and fracture behaviors of glassy–glassy block copolymers were investigated for polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) diblock copolymers that had similar overall molecular weights but different poly(methyl methacrylate) (PMMA) molar fractions. A liquid chromatography technique was applied to separate as-synthesized PS-b-PMMA [(1) weight-average molecular weight (M_w) = 94,000 g/mol and PMMA molar fraction = 0.35 and (2) M_w = 65,000 g/mol and PMMA molar fraction = 0.28] into three fractions with different chemical compositions. With a copper-grid technique, the fracture behaviors of 0.5-μm-thick PS-b-PMMA films were studied as a function of the applied strain. For the higher M_w PS-b-PMMA samples, the median strains at crazing and fibril breakdown increased with an increase in the PMMA molar fraction from 0.24 to 0.46, corresponding to an increase in the chain entanglements in the PMMA domains. In contrast, for the lower M_w samples, the two values were not significantly changed even when the PMMA molar fraction was varied from 0.16 to 0.35. M_w of the minor component in PS-b-PMMA played a critical role in controlling the fracture behaviors of the block copolymers. Specifically, M_w/M_e of the minor component (where M_e is the molecular weight between entanglements) had to be roughly larger than 2 for the block copolymers to sustain sufficient strains before fracture. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3612–3620, 2006     

TiCl4-promoted addition of nucleophiles to open chain α-amidoalkylphenyl sulfones

Linear α-amidoalkylphenyl sulfones are converted into the corresponding N-acyliminium ions by treatment with TiCl₄ at low temperature and then made to react with different nucleophiles such as allyltrimethylsilane, silyl ketene acetal, anisole and thiophene.     

Conjugate Addition of a Silyl Ketene Acetal to α,β‐Unsaturated Lactones

Abstract

Conjugate addition of a silyl ketene acetal [Me₂C?C (OMe)OSiMe₃] to α,β‐unsaturated lactones (namely, 5,6‐dihydro‐2H‐pyran‐2‐one, 2(5H)‐furanone as Michael acceptor) occurs efficiently at room temperature in the presence of a nucleophilic catalyst, tetra‐n‐butyl ammonium bibenzoate (TBABB), in THF as well as Lewis acid catalysts such as Yb(OTf)₃ and I₂ in CH₂Cl₂, giving the corresponding 1,4‐adducts in excellent yields.     

An efficient method for 3,4-dihydroisoquinolinium ion formation,leading to a facile introduction of nucleophiles

The ketene silyl acetal derived from ethyl 2-benzyltetrahydroisoquinoline-1-carboxylate undergoes a rapid oxidation reaction with N-bromosuccinimide to form 3,4-dihydroisoquinolinium ion, which reacts with Grignard reagents to give 1,1-disubstituted tetrahydroisoquinolines in good yields.     

Synthesis,structure, and property of well‐defined polymethylene‐based diblock copolymers by a combination of living polymerization of ylides and atom transfer radical polymerization

A combination of living polymerization of ylides and atom transfer radical polymerization (ATRP) was used successfully in the design and synthesis of well‐defined polymethylene‐b‐poly(methyl methacrylate) (PM‐b‐PMMA) and polymethylene‐b‐poly(n‐butyl acrylate) (PM‐b‐Pn‐BuA). Tripolymethylene borane were firstly synthesized by living polymerization of dimethylsulfoxonium methylides and then oxidated quantitatively through trimethylamine‐N‐oxide dihydrate to provide a series of low‐polydispersity hydroxyl‐terminated polymethylenes (PM‐OHs) with different molecular weight. Subsequently, such polymers were converted into polymethylene‐based macroinitiators (PM‐MIs, M_n(GPC) = 1900–10,400 g/mol; M_w/M_n = 1.12–1.23) in ～100% conversion. ATRPs of methyl methacrylate and n‐butyl acrylate were successfully conducted using PM‐MI to produce well‐defined diblock copolymers of PM‐b‐PMMA and PM‐b‐Pn‐BuA, respectively. The GPC traces indicated the successful extension of PMMA and Pn‐BuA segment (M_n(GPC) of PM‐b‐PMMA = 3980–10,100 g/mol; M_w/M_n = 1.16–1.22; M_n of PM‐b‐Pn‐BuA = 7400–9200 g/mol; M_w/M_n = 1.14–1.18). Atomic force microscopy (AFM) was used to characterize the structures of the precipitated PM‐b‐PMMA micelles, which were formed in toluene. The blend of LDPE/PMMA was prepared with PM‐b‐PMMA as compatibilizer. The scanning electron microscopy (SEM) results showed that the compatibilization of the LDPE/PMMA was improved greatly by the incorporation of PM‐b‐PMMA. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5671–5681, 2009     

Alkylation of pyrimido[5′,4′:5,6]pyrido[3,2-b]indol-4-one derivatives

Alkylation of 11-benzyl-3,11-dihydro-4H-pyrimido[5′,4′:5,6]pyrido[3,2-b]indol-4-one with methyl iodide and methyl bromoacetate in DMF gave 3-alkylpyrimidopyridoindolones as the corresponding salts. The reaction in acetone in the presence of K₂CO₃ yielded 3,6-disubstitution products. Alkylation with DMF dimethyl acetal gave a mixture of the 3- and 6-alkylpyrimidopyridoindol-4-one bases. The structure of 4-oxo-4,6-dihydro-3H-pyrimido-[5′,4′:5,6]pyrido[3,2-b]indol-11-ium chloride (3b) was proved by X-ray diffraction analysis.     

Derivate der 5,6-Dihydro-2H-pyran-3-carbonsäure

Summary Some derivatives of 5,6-dihydro-2H-pyran-3-carboxaldehyde (7) and of its oxidation product 5,6-dihydro-2H-pyran-3-carboxylic acid (8) have been prepared. The aldehyde derivatives as well as the amides and esters of8 have been tested in an insecticidal/fungicidal/acaricidal screening programme. The methylester35 shows a distinct knock down effect against the fruit flyDrosophila melanogaster.

     

Experimental and theoretical studies on Mannich-type reactions of chiral non-racemic N-(benzyloxyethyl) nitrones

The nucleophilic addition of both silyl ketene acetals and lithium enolates derived from methyl acetate to chiral non-racemic N-(benzyloxyethyl)nitrones has been studied both experimentally and theoretically. Aromatic nitrones showed lower reactivity that aliphatic nitrones and the addition of the silyl ketene acetal led to lower selectivities than the addition of the corresponding lithium enolate. Whereas low selectivity was obtained for the addition of the silyl ketene acetal, only one diastereomer could be detected in all cases for the addition of lithium enolate to aliphatic nitrones. The synthetic utility of the two chiral auxiliaries employed lies in the preparation of enantiomeric compounds. DFT theoretical calculations confirmed the stepwise mechanism for the addition of silyl ketene acetals to nitrones and are in good agreement with the observed experimental results.     

A chiral phosphepine–olefin rhodium complex as an efficient catalyst for the asymmetric conjugate addition

A monophosphine–olefin was synthesised from a 2,2′-bridged 1,1′-binaphthyl precursor, which served as a chiral bidentate ligand in the Rh catalysed 1,4-additions of arylboronic acids to cycloalkenones and 5,6-dihydro-2H-pyran-2-one. Fair yields (64–88%) and high asymmetric inductions (88–98% ee) have been obtained. The crystal structure of a corresponding cationic Rh(I) complex was determined.     

Stereoregular uniform polymers

Progress in stereospecific living polymerizations of methacrylate monomers and the concept and realization of “uniform polymers” and “uniform polymer architectures” are described, with particular emphasis on the fusion of polymer synthesis and characterization and their interactive stimulation, which are inevitable not only for the formation of polymers with highly controlled structures but also for the development of polymer characterization, thereby bringing about the spiral progress of both fields. First, three types of stereospecific living polymerizations are described, including formation of 100% isotactic poly(methyl methacrylate) (PMMA), 98% syndiotactic PMMA, and 96% heterotactic PMMA. Supercritical fluid chromatography (SFC) has proven useful for isolating uniform polymers from these stereoregular PMMAs with narrow molecular weight distributions. Living nature of these stereospecific polymerizations is further utilized for the synthesis of end‐functionalized stereoregular polymers, which are separated into uniform end‐functionalized polymers and used to construct more elaborated uniform polymer architectures such as stereoblock, star, and comb polymers. The uniform polymers have proven quite useful for the studies on the relationship between structures and properties such as glass transition temperature, melting temperature, and solution viscosity. In addition to this, stereoregular uniform polymers are particularly important to understand stereocomplex formation between isotactic and syndiotactic uniform PMMAs. On‐line GPC/NMR measurement at 750 MHz and −15°C in acetone/acetone‐d₆ allowed definitive determination of the compositions of the complexed species and noncomplexed species separately, but not in average. Also interesting is the stereocomplex formation of uniform stereoblock PMMA, where intramolecular complexation in addition to an intermolecular complexation was distinctively observed by GPC analysis in acetone. Uniform star and comb PMMAs were also prepared and found useful to discuss the effect of branching on the solution viscosity. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 245–260, 1999     

Anionic polymerization of methyl methacrylate by initiating systems based on lithium amides of various secondary amines

The anionic polymerization of methyl methacrylate in toluene at −78 °C with lithium amides of various secondary amines (diisopropylamine, N‐isopropylaniline, N‐n‐butylaniline, indoline, and N‐ethyl‐o‐toluidine) as initiators was studied. The tacticity of the resulting poly(methyl methacrylate)s (PMMAs) was dependent on the kind of secondary amine, and highly isotactic PMMAs (91–93% mm) were obtained when lithium amides of N‐isopropylaniline and N‐n‐butylaniline were employed. The isotacticity of the PMMAs further increased up to 98% mm with initiating systems composed of the lithium amides, n‐butyllithium, and transition‐metal halides (WCl₆, MoCl₅, and NbCl₅). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4405–4411, 2005     

Utilization of Donor–Acceptor Interactions for the Catalytic Acceleration of Nucleophilic Additions to Aromatic Carbonyl Compounds

A conceptually new method for the catalytic electrophilic activation of aromatic carbonyl substrates, by utilizing donor–acceptor interactions between an electron‐deficient macrocyclic boronic ester host ( [2+2] _BTH‐F ) and an aromatic carbonyl guest substrate, was realized. In the presence of a catalytic amount of [2+2] _BTH‐F , dramatic acceleration of the nucleophilic addition of a ketene silyl acetal towards either electron‐rich aromatic aldehydes or ketones was achieved. Several control experiments confirmed that inclusion of the aromatic substrates within [2+2] _BTH‐F , through efficient donor–acceptor interactions, is essential for the acceleration of the reaction.     

Synthesis of derivatives of the new heterocyclic system pyrimido[5′,4′:5,6]pyrido[3,2-b]indole

Derivatives of the new heterocyclic system 1,11-dihydro-4H-pyrimido[5′,4′: 5,6]pyrido[3,2-b]indol-4-one were synthesized by the reactions of 2-(2-cyanoprop-2-enylidene)indolin-3-ones, bearing the primary and secondary amino groups in position 3 of the side chain, with DMF diethyl acetal. A scheme of formation of the synthesized compounds was proposed and confirmed. Dedicated to Academician V. A. Tartakovsky on the occasion of his 75th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1529–1535, August, 2007.