High-temperature complex impedance and modulus spectroscopic studies of doped Na<Subscript>0.5</Subscript>Bi<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>-BaTiO<Subscript>3</Subscript> ferroelectric ceramics

Lead-free Na_0.5Bi_0.5TiO₃ (NBT) and (1 ? x)Na_0.5Bi_0.5TiO₃ + xBaTiO₃ with x = 0.1 and 0.2 (where x = 0.1 and 0.2 are named as NBT1 and NBT2, respectively), (1 ? y)Na_0.5Bi_0.5TiO₃ + yBa_0.925Nd_0.05TiO₃ with y = 0.1 and 0.2 (where y = 0.1 and 0.2 are named as NBT3 and NBT4, respectively)-based relaxor ferroelectric ceramics were prepared using the sol-gel method. The crystal structure was investigated by X-ray diffraction (XRD) at room temperature (RT). The XRD patterns confirmed the presence of the rhombohedral phase in all the samples. The electrical properties of the present NBT-based samples were investigated by complex impedance and the modulus spectroscopy technique in the temperature range of RT–600 °C. The AC conductivity was found to increase with the substitution of Ba²⁺ ions to the NBT sample whereas it significantly decreased with the addition of Nd³⁺ ions. The more anion vacancies in Ba-added samples and the lower anion vacancies in Nd-added samples were found to be responsible for higher and lower conductivities, respectively.     

The effect of CuO and NiO doping on dielectric and ferroelectric properties of Na0.5Bi0.5TiO3 lead-free ceramics

In the present work, lead-free piezoelectric ceramics (Na_0.5Bi_0.5)TiO₃ –xCuO–yNiO (for x = 0.0, 0.02, 0.04 and 0.06) have been prepared by a conventional solid-state reaction method. An investigation of CuO and NiO doping in bismuth sodium titanate (BNT) and a study of the structure, morphology, and dielectric and ferroelectric properties of the NBT–CuNi system have been conducted. Phase and microstructural analysis of the (Na_0.5Bi_0.5)TiO₃ (NBT) based ceramics has been carried out using X-ray diffraction and scanning electron microscopy (SEM) techniques. Field emission scanning electron microscopy (FE-SEM) images showed that inhibition of grain growth takes place with increasing Cu and Ni concentration. The results indicate that the co-doping of NiO and CuO is effective in improving the dielectric and ferroelectric properties of NBT ceramics. Temperature-dependent dielectric studies have also been carried out at room temperature to 400 °C at different frequencies. The NBT ceramics co-doped with x = 0.06 and y = 0.06 exhibited an excellent dielectric constant ?_r = 1514. The study suggests that there is enormous scope of application of such materials in the future for actuators, ultrasonic transducers and high-frequency piezoelectric devices.     

Dielectric and piezoelectric properties of barium-modified Aurivillius-type Na0.5Bi4.5Ti4O15

In this study, monophasic Ba_x(Na_0.5Bi_0.5)_1−xBi₄Ti₄O₁₅ (x=0.03, 0.06, 0.09 and 0.12) ceramics fabricated from the powders synthesized via the solid-state reaction route exhibited relaxor behavior. X-ray diffraction analysis revealed that the barium-modified Na_0.5Bi_4.5Ti₄O₁₅ ceramics have a pure four-layer Aurivillius phase structure. Dielectric properties and phase transitions were studied and are explained in terms of lattice response of these ceramics. A shift in ferroelectric–paraelectric phase transition (T_c) to lower temperatures and a corresponding increase in permittivity peak with increasing concentration of Ba²⁺ are also observed. The decrease of orthorhombicity in the lattice structure by the larger Ba²⁺ ion incorporation, indicating an approach of a and b parameters, results in lower Curie temperature. The piezoelectric activity of Na_0.5Bi_4.5Ti₄O₁₅ (NBT) ceramics was significantly improved by the modification of barium. The Curie temperature T_c and piezoelectric coefficient d₃₃ for the composition with x=0.12 were found to be 635 °C and 21 pC/N, respectively. The relationship of polarization with lattice response is discussed.     

Photoluminescence and electrical properties of Eu-doped (Na0.5Bi0.5)TiO3 ferroelectric single crystals

Eu³⁺-doped Na_0.5Bi_0.5TiO₃ (Eu:NBT) single crystals were grown by a top-seeded solution growth method. Photoluminescence emission and excitation spectra of Eu:NBT were investigated. The two transitions in ⁷F₀ → ⁵D₀ excitation spectra reveal that Eu³⁺ ions were incorporated into two adjacent crystallographic sites in NBT, i.e., Bi³⁺ and Na⁺ sites. The former has a symmetrical surrounding, while the later has a disordered environment, which was confirmed by decay curve measurements. The dielectric dispersion behavior was depressed and the piezoelectric and ferroelectric properties were improved after Eu doping.     

Enhanced piezoelectric properties of sodium bismuth titanate (Na0.5Bi4.5Ti4O15) ceramics with B‐site cobalt modification

The piezoelectric properties of the cobalt‐modified sodium bismuth titanate (Na_0.5Bi_4.5Ti₄O₁₅, NBT) piezoelectric ceramics were investigated. The piezoelectric properties of NBT ceramics were significantly enhanced by cobalt modification. The Curie temperature T_C and piezoelectric constant d₃₃ for the 0.3 wt% cobalt‐modified NBT ceramics (NBT‐C3) were found to be 663 °C and 30 pC/N, respectively. Thermal annealing studies presented that the cobalt‐modified NBT ceramics possess stable piezoelectric properties, demonstrating that the cobalt‐modified NBT‐based ceramics are promising candidates for high temperature piezoelectric applications. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Properties of the solid solution (1−x)Na0.5Bi0.5TiO3-(x)BiFeO3

This study shows that remarkable electric and magnetic properties are encountered within the (1−x)Na_0.5Bi_0.5TiO₃ (NBT)-(x)BiFeO₃ (BF) solid solution. Dual ferroelectric and magnetic properties are observed in the BF-rich part of the solid solution implying intrinsic multiferroic character of the compounds. In addition, a relaxation phenomenon is evidenced within the overall compositional domain of the solid solution. This study emphasizes that in the NBT-rich part, the relaxor behaviour is very similar to that of NBT, while beyond x=0.5, it turns to a different mechanism of relaxation probably induced by the presence of oxygen vacancies resulting from the mixed valence of the iron cations.     

Ferroelectric-relaxor behavior of (Na0.5K0.5)NbO3-based ceramics

We report that ferroelectric-relaxor behavior is induced by doping of SrO and TiO₂, or BaO and TiO₂ into classic ferroelectric (Na_0.5K_0.5)NbO₃. It is found that [(Na_0.5K_0.5)_0.9Sr_0.1](Nb_0.9Ti_0.1)O₃ ceramics exhibit a pronounced ferroelectric-relaxor behavior, comparable to that of [(Na_0.5K_0.5)_0.9Ba_0.1](Nb_0.9Ti_0.1)O₃ ceramics. Our results indicate that the relaxor behavior is closely related to the appearance of micropolar regions in these systems. The relaxor behavior should arise from the dynamic response of micropolar clusters. Raman spectra of [(Na_0.5K_0.5)_1−xSr_x](Nb_1−xTi_x)O₃ ceramics measured in the wavenumber range from 100 to 1200 cm⁻¹ confirm that the first order scattering is dominant in phonon bands should result from both short-range ordered region (micropolar regions) and disordered matrix. The frequency dependence of dielectric permittivity measurements show that the relaxor behavior of SrO and TiO₂, or BaO and TiO₂ doped (Na_0.5K_0.5)NbO₃ ceramics is not a Debye type in the radio frequency range.     

The structural origin of the antiferroelectric properties and relaxor behavior of Na0.5Bi0.5TiO3

This work presents a study of Na_0.5Bi_0.5TiO₃ (NBT) by transmission electron microscopy in the 20-370 °C temperature range. A new orthorhombic intermediate phase between the rhombohedral and the tetragonal phases is proposed to account for the occurrence of (oee) superstructure spots. The phase transition from the rhombohedral to the orthorhombic phase occurs via a modulated phase formed by rhombohedral blocks and orthorhombic sheets. It is shown that these latter represent rhombohedral (0 1 0) twin planes. The modulated phase is proposed to explain the antiferroelectric and relaxor behaviors of NBT.     

Microstructure,dielectric, and piezoelectric properties of Ce‐modified Na0.5Bi4.5Ti4O15 high temperature piezoceramics

The cerium modified sodium bismuth titanate (Na_0.5Bi_4.5Ti₄O₁₅, NBT) piezoelectric ceramics have been prepared by using the conventional mixed oxide method. X‐ray diffraction analysis revealed that the cerium modified NBT ceramics have a pure four‐layer Aurivillius phase structure. The piezoelectric activity of NBT ceramics was found significantly improved by the modification of cerium. The Curie temperature T_c, and piezoelectric coefficient d₃₃ for the NBT ceramics with 0.50 wt% cerium modification were found to be 655 °C, and 28 pC/N respectively. The Curie temperature gradually decreased from 668 °C to 653 °C with the increase of cerium modification. The dielectric spectroscopy showed that the samples possess stable piezoelectric properties, demonstrating practical potential that for high temperature applications. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structure and electrical properties of Bi0.5(Na, K)0.5TiO3−BiGaO3 lead-free piezoelectric ceramics

Lead-free piezoelectric ceramics (1 − x − y)Bi_0.5Na_0.5TiO₃−xBi_0.5K_0.5TiO₃− yBiGaO₃ have been fabricated by an ordinary sintering technique, and their structure and electrical properties and depolarization temperature have been studied. The results of X-ray diffraction reveal that Bi_0.5K_0.5TiO₃ and BiGaO₃ diffuse into the Bi_0.5Na_0.5TiO₃ lattices to form a new solid solution with a pure perovskite structure. An obvious change in microstructure with increasing concentration of Bi_0.5K_0.5TiO₃ and BiGaO₃ was observed. The piezoelectric constant d₃₃ and the electromechanical coupling factor k_p of the ceramics attain maximum values of 165 pC/N and 0.346 at y = 0.01(x = 0.18) and x = 0.21(y = 0.01), respectively. The temperature dependence of dielectric constant indicates an obvious relaxor characteristic with strong frequency dependence of dielectric constant. The depolarization temperature decreased with increasing content of BiGaO₃ and first decreases and then increases with increasing amount of Bi_0.5K_0.5TiO₃.     

Dielectric,thermal and Raman spectroscopy studies of lead-free (Na0.5Bi0.5)1−xSrxTiO3 (x = 0, 0.04 and 0.06) ceramics

ABSTRACT

Lead-free (Na_0.5Bi_0.5)_1?xSr_xTiO₃ (x = 0, 0.04 and 0.06) ceramics with relative densities above 97% were prepared by solid-state synthesis process. Their dielectric, thermal and Raman properties were studied. X-ray diffraction analysis shows perovskite structure with rhombohedral symmetry at room temperature. Sr doping of Na_0.5Bi_0.5TiO₃ (NBT) results in an increase of the dielectric permittivity, diffusing of the permittivity maximum and its shift toward lower temperatures. The temperature of the rhombohedral–tetragonal phase transition indicated by the differential scanning calorimetry (DSC) peak and relaxational dielectric anomaly near the depolarization temperature are also shifted toward lower temperatures. The observed increase and broadening of the permittivity maximum, enhancement of the dielectric relaxation near the depolarization temperature, broadening of the DSC anomaly related to the rhombohedral–tetragonal phase transition and broadening of the Raman bands with increasing Sr content are attributed to the increase of the degree of cationic disorder and evident enhancement of the relaxor-like features in NBT–xST. This enhancement could play a positive role in the improvement of the piezoelectric performance of NBT-based ceramics.     

Phase diagram of (1−x%)(0.89Bi0.5Na0.5TiO3–0.06BaTiO3–0.05K0.5Na0.5NbO3)–x%MnO2 lead-free anti-ferroelectric ceramics

A phase diagram for the lead-free ceramics in the (1?x%)(0.89Bi_0.5Na_0.5TiO₃–0.06BaTiO₃–0.05K_0.5Na_0.5NbO₃)–x%MnO₂ (BNBKN-x%Mn) binary system is constructed for the first time based on the ferroelectric and dielectric measurements. The ferroelectric behaviors under different temperatures suggest that the ceramics are basically of relaxor anti-ferroelectric nature near room temperature. The temperature dependent dielectric properties show that when the addition of MnO₂ increases, the relaxor anti-ferroelectric phase can be stabilized to be close to the Curie point, which corresponds to a relaxor anti-ferroelectric to paraelectric phase transition.     

First principles study of Ca in BaTiO3 and Bi0.5Na0.5TiO3

BaTiO₃–Bi_0.5Na_0.5TiO₃ is one of the promising candidates as a high-temperature relaxor with a high Curie temperature and several preferred dielectric characteristics. It has been found experimentally for a long time that adding calcium to BaTiO₃–Bi_0.5Na_0.5TiO₃ improves its temperature characteristic of the capacitance [J. Electron. Mater. 39, 2471]. In this study, Calcium (Ca) defects in perovskite BaTiO₃ and Bi_0.5Na_0.5TiO₃ have been studied based on first-principles calculations. In both BaTiO₃ and Bi_0.5Na_0.5TiO₃, our calculations showed that Ca atom energetically prefers to substitute for the cations, that is Ba, Bi, Na and Ti, depending on the growth conditions. In most cases, Ca predominantly substitutes on the A-site without providing additional electrical carriers (serve as either neutral defects or self-compensating defects). The growth conditions where Ca can be forced to substitute for B-site (with limited amount) and the conditions where Ca can be forced to serve as an acceptor are identified. Details of the local structures, formation energies and electronic properties of these Ca defects are reported.     

High-temperature impedance spectroscopy of BaFe0.5Nb0.5O3 ceramics doped with Bi0.5Na0.5TiO3

Bi_0.5Na_0.5TiO₃ (BNT)-doped BaFe_0.5Nb_0.5O₃ (BFN) ceramics were synthesized by a two-step solid-state reaction. Temperature dependence of dielectric properties measured at different frequencies was investigated over broad temperature and frequency ranges. Impedance spectroscopy and universal dielectric response were employed to study the relaxation behavior and conductivity mechanism of the ceramics in a frequency range from 40 Hz to 100 MHz and a temperature range from 300 K to 800 K. The complex plane impedance data revealed the bulk and grain boundary contributions toward conductivity processes in the form of semicircular arcs. The high-temperature conductivity of ceramics is attributable to thermally activated second ionized oxygen vacancy.     

Specific Features of the Structure and the Dielectric Properties of Sodium–Bismuth Titanate-Based Ceramics

The phase formation, specific features, and the dielectric properties of the ceramics of compositions from the region of morphotropic interface in the (Na_0.5Bi_0.5)TiO₃–BaTiO₃ system modified by Bi(Mg_0.5Ti_0.5)O₃ and also low-melting additions KCl, NaCl–LiF, CuO, and MnO₂ that favor the control of the stoichiometry and the properties of the ceramics have been studied. The ceramics are characterized by ferroelectric phase transitions that are observed as jumps at temperatures near 400 K and maxima at T_m ~ 600 K in the temperature dependences of the dielectric permittivity. The phase transitions at ~400 K demonstrate the relaxor behavior indicating the existence of polar domains in the nonpolar matrix. An increase in the content of Bi(Mg_0.5Ti_0.5)O₃ favor a decrease in the electrical conductivity and dielectric losses of the samples, and the relative dielectric permittivity at room temperature ε_rt is retained quite high, achieving the highest values ε_rt = 1080–1350 in the ceramics modified with KCl.     

Raman spectral studies of Zr4+‐rich BaZrxTi1−xO3(0.5⩽x⩽1.00) phase diagram

This paper reports a systematic study of the composition and the temperature‐dependent‐Raman spectra of Zr⁴⁺‐rich BaZr_xTi_1−xO₃ (BZT) ceramic compositions (0.50⩽x⩽1.00). On the basis of the dielectric behavior of Zr rich BZT ceramics, the observed relaxor behavior has been hypothesized as a result of increasing long‐range interactions of nanosized, Ti⁴⁺‐rich polar regions in a Zr⁴⁺‐rich nonpolar matrix. Beyond an optimum concentration of BaTiO₃ (BT) in the nonpolar matrix of BaZrO₃ (x⩽0.75), a critical size and density of the polar regions is reached when the polar clusters start showing the relaxor like behavior, which finally show classical relaxor behavior for compositions with x = 0.5 and 0.6. This hypothesis is strongly supported from the Raman data on Zr‐rich BZT presented in this paper. Well‐defined BT Raman spectra for 5% BT in BZT composition were recorded, which followed completely up to the 50% Ti addition in the BZT samples. The temperature‐dependent Raman spectra collected on the BZT ceramics far beyond the dielectric transition temperatures supported the existence of the nano‐polar BT regions, like in typical relaxor samples. The full width at half‐maximum (FWHM), integrated intensity of the peaks in the Raman spectra has been analyzed to further support the conclusions. Copyright © 2008 John Wiley & Sons, Ltd.     

Properties of the ferroelectric ceramics PbSc<Subscript>0.5</Subscript>Ta<Subscript>0.5</Subscript>O<Subscript>3</Subscript> fabricated from an ultradispersed powder

The relaxor ceramics PbSc_0.5Ta_0.5O₃ produced from an ultradispersed powder is studied by X-ray diffraction and dielectric measurements. Before sintering, the powder was subjected to treatment in Bridgman anvils in combination with shear deformation. This method is shown to affect the order parameter and dielectric properties of the ceramics without using long-term high-temperature annealing.     

Lead‐free piezoelectric (Na0.5Bi0.5)0.94TiO3–Ba0.06TiO3 nanofiber by electrospinning

Lead‐free (Na_0.5Bi_0.5)_0.94TiO₃–Ba_0.06TiO₃ (NBT‐BT6) nanofibers were synthesized by the sol–gel process and electrospinning, and a butterfly‐shaped piezoelectric response was measured by scanning force microscopy. NBT‐BT6 nanofibers with perovskite phase were formed, after being cleaned at 700 °C for 1 hour, and the diameters are in the range of 150 nm to 300 nm. The average value of the effective piezoelectric coefficient d₃₃ is 102 pm/V. The high piezoelectricity may be attributed to the easiness for the electric field to tilt the polar vector of the domain and to the increase of the possible spontaneous polarization direction. There is a potential for the application of NBT‐BT6 nanofibers in nanoscale piezoelectric devices. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Improved electrical properties in La- and V-co-doped Na0.5Bi4.5Ti4O15 thin films

Ferroelectric La- and V-co-doped Na_0.5Bi_4.5Ti₄O₁₅ (NLBTV) thin film was prepared on Pt(111)/Ti/SiO₂/Si substrates by using a chemical solution deposition method and annealed at 750?°C under oxygen atmosphere. Crystal structure of the thin film was investigated by X-ray diffraction and Raman scattering. Surface morphology of the thin film was investigated by scanning electron microscopy. The NLBTV thin film capacitor exhibited better ferroelectric properties such as larger remnant polarization and smaller coercive electric field than Na_0.5Bi_4.5Ti₄O₁₅ (NBT) thin film capacitor. Reduced leakage current was observed in the NLBTV thin film capacitor compared to the NBT thin film capacitor. Almost no polarization fatigue was observed up to 1.44×10¹⁰ switching cycles.     

Structure, electrical properties and temperature characteristics of?Bi0.5Na0.5TiO3–Bi0.5K0.5TiO3–Bi0.5Li0.5TiO3 lead-free piezoelectric ceramics

(1−x−y)Bi_0.5Na_0.5TiO₃–xBi_0.5K_0.5TiO₃– yBi_0.5Li_0.5TiO₃ lead-free piezoelectric ceramics have been prepared by an ordinary sintering technique, and their structure, electrical properties, and temperature characteristics have been studied systematically. The ceramics can be well-sintered at 1050–1150 °C. The increase in K⁺ concentration decreases the grain-growth rate and promotes the formation of grains with a cubic shape, while the addition of Li⁺ decreases greatly the sintering temperature and assists in the densification of BNT-based ceramics. The results of XRD diffraction show that K⁺ and Li⁺ diffuse into the Bi_0.5Na_0.5TiO₃ lattices to form a solid solution with a pure perovskite structure. As x increases from 0.05 to 0.50, the ceramics transform gradually from rhombohedral phase to tetragonal phase and consequently a morphotropic phase boundary (MPB) is formed at 0.15≤x≤0.25. The concentration y of Li⁺ has no obvious influence on the crystal structure of the ceramics. Compared with pure Bi_0.5Na_0.5TiO₃, the partial substitution of K⁺ and Li⁺ for Na⁺ lowers greatly the coercive field E _c and increases the remanent polarization P _r of the ceramics. Because of the MPB, lower E _c and large P _r, the piezoelectricity of the ceramics is improved significantly. For the ceramics with the compositions near the MPB (x=0.15–0.25 and y=0.05–0.10), the piezoelectric properties become optimum: piezoelectric coefficient d ₃₃=147–231 pC/N and planar electromechanical coupling factor k _P=20.2–41.0%. In addition, the ceramics exhibit relaxor characteristic, which probably results from the cation disordering in the 12-fold coordination sites. The depolarization temperature T _d shows a strong dependence on the concentration x of K⁺ and reaches the lowest values at the MPB. The temperature dependences of the ferroelectric and dielectric properties at high temperatures may imply that the ceramics may contain both the polar and non-polar regions at temperatures above T _d.