Structure,dielectric and bioactivity of P2O5–CaO–Na2O–B2O3 bioactive glass

Bioactive phosphate glasses have been widely investigated for bone repair. Phosphate glass system of 47P₂O₅–30.5CaO–(22.5?x)Na₂O–xB₂O₃ has been prepared by melt quenching technique. From the Raman analysis, it is confirmed that phosphate network form metaphosphate structure. Bioactivity of the glass is studied by immersing the prepared glass in simulated body fluid (SBF). All the glasses exhibited bioactivity after soaking in SBF. Addition of B₂O₃ to the glass by replacing the Na₂O produces considerable effect on the dielectric and bioactivity of the glass. Ion dynamics are also analyzed through imaginary modulus and imaginary dielectric permittivity.     

Specific Features of the Local Structure and Transport Properties of ZrO2–Sc2O3–Y2O3 and ZrO2–Sc2O3–Yb2O3 Crystals

Optics and Spectroscopy - The specific features of the local structure of ZrO2–Sc2O3–Y2O3 and ZrO2–Sc2O3–Yb2O3 crystals are revealed by optical spectroscopy using the Eu3+...     

Crystallization and conductivity of 2CaO–La2O3–5P2O5 glass–ceramic with Al2O3 addition

Al₂O₃ was added to a 2CaO–La₂O₃–5P₂O₅ metaphosphate, to replace 10% of the Ca²⁺ ions by Al³⁺, forming a phosphate with the nominal composition 1.8CaO–0.1Al₂O₃–La₂O₃–5P₂O₅. The effect of Al₂O₃ addition and heat treatment on the microstructure and conductivity of the resulting glass–ceramics was investigated by XRD, SEM, TEM, and AC impedance spectroscopy. Upon transformation from glass to glass–ceramic, conductivities increased significantly. The glasses were isochronally transformed at 700 and at 800 °C for 1 h or 5 h, in air, following heating at 3 or 10 °C/min. With Al₂O₃ addition, after a heat treatment at 700 °C, 100–300 nm nano-domains of LaP₃O₉ crystallized from the glass matrix. Annealing at 800 °C produced a further order of magnitude conductivity increase for the Al-free glass, but less so for the Al-containing glass.     

Optical and IR study of Li2O–CuO–P2O5 glasses

Infrared (IR) and UV spectra of ternary Li₂O–CuO–P₂O₅ glasses in two series Li₂O(65−X)%–CuO(X%)–P₂O₅(35%), X = 20, 30, 40 and Li₂O(55−X)%–CuO(X%)–P₂O₅(45%), X = (10, 20, 30) were studied. Infrared (IR) investigations showed the metaphosphate and pyrophosphate structures and with increase of CuO content in metaphosphate glass, the skeleton of metaphosphate chains is gradually broken into short phosphate groups such as pyrophosphate. IR spectra showed one band at about 1,220 and 1,260 cm⁻¹ for P₂O₅(35%) and P₂O₅(45%) series, respectively, assigned to P=O bonds. For CuO additions ≤20 mol%, the glasses exhibit two bands in the frequency range 780–720 cm⁻¹ which are attributed to the presence of two P–O–P bridges in metaphosphate chain. But for CuO addition ≥30 mol%, the glasses exhibit only a single band at 760 cm⁻¹ which is assigned to the P–O–P linkage in pyrophosphate group. In optical investigations, absorption coefficient versus photon energy showed three regions: low energy side, Urbach absorption, and high energy side. In Urbach’s region, absorption coefficient depends exponentially on the photon energy. At high energy region, optical gap was calculated and investigations showed indirect transition in compounds and decreases in optical gap with increases of copper oxides contents that is because of electronic transitions and increasing of nonbridging oxygen content.     

Electrical transport characteristics of ZnO–Bi2O3–B2O3 glasses

Optically clear glasses in the ZnO–Bi₂O₃–B₂O₃ (ZBBO) system were fabricated via the conventional melt-quenching technique. Dielectric constant and loss measurements carried out on ZBBO glasses unraveled nearly frequency (1 kHz–10 MHz)-independent dielectric characteristics associated with significantly low loss (D?=?0.004). However, weak temperature response was found with temperature coefficient of dielectric constant 18?±?4 ppm °C^?1 in the 35–250 °C temperature range. The conduction and relaxation phenomena were rationalized using universal AC conductivity power law and modulus formalism respectively. The activation energy for relaxation determined using imaginary parts of modulus peaks was 2.54 eV which was close to that of the DC conduction implying the involvement of similar energy barriers in both the processes. Stretched and power exponents were temperature dependent. The relaxation and conduction in these glasses were attributed to the hoping and migration of Bi³⁺ cations in their own and different local environment.     

EPR and Magnetic Susceptibility of Na2O–CuO–P2O5 Glasses

Abstract

(50?x/2)Na₂O–xCuO–(50?x/2)P₂O₅ glasses (x=1, 5, 15, or 30 mol%) have been prepared and characterized by electron paramagnetic resonance (EPR) and magnetic susceptibility measurements. The shape of the Cu²⁺ EPR spectrum depends on the Cu content, and the corresponding computer simulations suggest that the Cu²⁺ ions occupy two different sites in these glasses: one of them is preponderant at low Cu content and the other is preponderant at high content, in which the Cu²⁺–Cu²⁺ interactions are more important. From EPR parameters, it was found that for the site at low content, the covalency of copper ion bonding with the surrounding ligands is appreciable. The magnetic susceptibility data appear to follow the Curie–Weiss law (χ=C/(T?θ_p)) with negative paramagnetic Curie temperature θ_p indicating antiferromagnetic interactions between Cu²⁺ ions that are more significant in the samples with high Cu content, in agreement with EPR results.     

Activation energy and conductivity of glasses in the P2O5–V2O5–Li2O system

The conductivity of glasses in the 50\textP_\text2 \textO_\text5 - x\textV_\text2 \textO_\text5 - ( 50 - x )\textLi_\text2 \textO50{\text{P}}_{\text{2}} {\text{O}}_{\text{5}} - x{\text{V}}_{\text{2}} {\text{O}}_{\text{5}} - \left( {50 - x} \right){\text{Li}}_{\text{2}} {\text{O}} system was studied as a function of temperature and composition. For all compositions, the conductivity variation as a function of temperature followed an Arrhenius type relationship. Isothermal variation of conductivity as a function of composition showed a minimum for a molar ratio x near 20. Probable mechanisms for decrease of conductivity with decrease of vanadium oxide concentration were explained. The minimum in room temperature was attributed to increase of V⁴⁺/V⁵⁺ with decrease of vanadium oxide in specific concentrations of vanadium oxide. Activation energy increased with decrease of V₂O₅ content. This behavior was attributed to increase of average spacing between vanadium ions.     

Infrared spectra of acetylene–water complexes: C2D2–H2O,C2D2–HDO,and C2D2–D2O

Infrared spectra of C₂D₂–water complexes are studied in the 4.1 μm region of the C₂D₂ ν₃ fundamental band using a tunable diode laser source to probe a pulsed supersonic slit jet. Relatively large vibrational red shifts (?27.7 to ?28.0 cm^?1) are observed which are more easily interpretable than for the analogous C₂H₂ vibration thanks to the absence of Fermi resonance effects for C₂D₂. Noticeable homogeneous line broadening leads to estimates of upper state predissociation lifetimes of about 0.5, 0.9 and 1.1 ns for C₂D₂–H₂O, –HDO, and –D₂O, respectively. Transitions involving K_a = 0 and 1 levels are observed for C₂D₂–HDO, but there is a puzzling absence of K_a = 1 for C₂D₂–H₂O and C₂D₂–D₂O.     

YAG laser-induced β-BaB2O4 crystalline dot formation in Sm2O3–BaO–B2O3 glasses

A continuous-wave (CW) YAG laser (power: 0.75–0.9 J/s, irradiation time: 15 s–15 min) with a wavelength of 1064 nm is irradiated to 11.1Sm₂O₃·44.4BaO·44.4B₂O₃ glass, and the formation of β-BaB₂O₄ (β-BBO) crystalline dots with a diameter of 30–150 μm is confirmed from micro-Raman spectra. β-BBO crystals with around 200 μm length grow towards the interior of the glass. The incorporation of Sm³⁺ into β-BBO crystalline dots is suggested from micro-Raman and fluorescence spectra. The second harmonic generation is detected from the array (10×10=100 dots) of β-BBO crystalline dots, indicating that each crystalline dot formed by YAG laser irradiation is a nonlinear optical crystal. CW YAG laser irradiation to glass with Sm³⁺ ions is a nice technique for a spatially controlled crystal growth.     

Detailed modeling of planar transcritical H2–O2–N2 flames

We first investigate a detailed high pressure flame model. Our model is based on the thermodynamics of irreversible processes, statistical mechanics, statistical thermodynamics, and the kinetic theory of dense gases. We study thermodynamic properties, chemical production rates, transport fluxes, and establish that entropy production is non-negative. We next investigate the structure of planar transcritical H₂–O₂–N₂ flames and perform a sensitivity analysis with respect to the model. Non-idealities in the equation of state and in the transport fluxes have a dramatic influence on the cold zone of the flame. Non-idealities in the chemical production rates – consistent with thermodynamics and important to insure positivity of entropy production – may also strongly influence flame structures at very high pressures. At sufficiently low temperatures, fresh mixtures of H₂–O₂–N₂ flames are found to be thermodynamically unstable, in agreement with experimental results. We finally study the influence of various parameters associated with the initial reactants on the structure of transcritical planar H₂–O₂–N₂ flames as well as lean and rich extinction limits.     

Ultrasonic and FT-IR studies on Bi2O3–Er2O3–PbO glasses

Glasses in the 90Bi₂O₃–(10?x)Er₂O₃?xPbO (x = 3, 5, 7, 9 and 10 mol%) system have been prepared by the melt-quenching technique. Elastic properties and FT-IR spectroscopic studies have been employed to study the role of PbO in the structure of the investigated system. Elastic properties and Debye temperature were recorded using sound wave velocity measurements at 4 MHz at room temperature. The results showed that density increased and molar volume decreased, while both sound velocities increased with an increase in x. Infrared spectra of the glasses revealed that the bismuthate network is affected by an increase in PbO content. The results are interpreted in terms of the conversion of [BiO₆] into [BiO₃] structural units, indicating that Pb ions have been substituted for erbium ions as tetrahedral network formers. The elastic moduli increased with increasing PbO content due to the increased average bond strength and degree of connectivity, as a direct effect of the increase in [BiO₃] structural units.     

Influence of different Fe2O3 content on crystallization of MgO–Al2O3–SiO2–TiO2 system glass-ceramics

The crystallization behaviors of MgO–Al₂O₃–SiO₂–TiO₂ system glasses doping with different content Fe₂O₃ were investigated by means of differential thermal analysis and X-ray diffraction. The kinetic parameter of activation energy for crystallization (E) was obtained by the Owaza Johnson–Mehl–Avrami method. The results show that during the heat treatment, the intermediate phase of µ-cordierite initially precipitated from the glass matrix, and with the increasing temperature, it transformed to α-cordierite. The more the Fe₂O₃ content, the lower the crystallization peak temperature (T _p).But the lowering of T _p value did not mean that the value of E decreases correspondingly. The experimental results suggest that only with appropriate content (about 4.2 wt%), Fe₂O₃ can promote the crystallization of this glass effectively.     

Proton conductivity in sol–gel-derived P2O5–TiO2–SiO2 glasses

The sol–gel method was applied to prepare the P₂O₅–TiO₂–SiO₂ glasses with high proton conductivities and chemical stability. The glasses were prepared by the reaction of the Ti- and Si-alkoxides with PO(OCH₃)₃ or H₃PO₄, followed by heating at 600 °C. The obtained glasses were porous, the average pore diameter of which was <2 and 4 nm for glasses prepared using PO(OCH₃)₃ and H₃PO₄, respectively. The phosphorous ions, occurring as PO(OH)₃ in the TiO₂-free glass, were polymerized with one or two bridging-oxygen ions per PO₄ unit with the increasing TiO₂ content. Despite the P₂O₅–SiO₂ binary glasses exhibiting high conductivities of ∼10⁻² S/cm at room temperature, they also dissolved after immersing for 24 h in water. The chemical stability of these glasses increased significantly on the addition of TiO₂.     

Spectral dispersion of linear optical properties for Sm2O3 doped B2O3–PbO–Al2O3 glasses

Glasses having composition (B₂O₃)₂₅ (PbO)₇₀ (Al₂O₃)₅ (Sm₂O₃)_x ,where x=0, 0.5, 1, 2, 3 and 5 g were prepared using the normal melt quench technique. Spectral reflectance and transmittance at normal incidence of the glass samples are recorded with a spectrophotometer in the spectral range 220–2200 nm. These measured values are introduced into analytical expressions to calculate the real and imaginary parts of the refractive indices. Wemple–DiDomenico single oscillator model and one-term Sellmeier dispersion relations are used to model the real refractive indices. Dispersion parameters such as: single oscillator energy, dispersion energy, lattice oscillating strength, average oscillator wavelength, average oscillator strength and Abbe's number are deduced and compared. Absorption dispersion parameters such as: Fermi energy, optical energy gap for direct and indirect transitions, Urbach energy and steepness parameter are calculated. Effects of doping Sm₂O₃ on these linear optical parameters are investigated and interpreted.     

Broadband 1.5-μm emission of high erbium-doped Bi2O3–B2O3–Ga2O3 glasses

High Erbium-doped glass showing the wider 1.5-μm emission band is reported in the Bi₂O₃–B₂O₃–Ga₂O₃ system and its thermal stability and optical properties such as absorption, emission spectra, absorption and stimulated emission cross-sections and fluorescence lifetime are investigated. Compared with other glass hosts, the gain bandwidth properties of high Er³⁺ content in BBG glass are better than those of tellurite, germanate, silicate and phosphate glasses. The broad and flat ⁴I_13/2→⁴I_15/2 emission and the larger stimulated emission cross-section of Er³⁺ ions around 1.5 μm enable it to be used as a host material for potential broadband optical amplifiers at C and L bands in the microchip configuration.     

Optical properties of glasses in the Li2O–MoO3–P2O5 system

Glasses xLi₂O–(50-x)(MoO₃)₂–50P₂O₅ with x = 10, 20, 30, and 40 mol% were prepared and their optical and electrical properties were investigated. Analysis of the IR spectra revealed that the Li⁺ ions act as a glass modifier that enter the glass network by breaking up other linkages and creating non-bridging oxygens in the network. The optical absorption edge of the glasses was measured for specimens in the form of thin blown films and the optical absorption spectra of those were recorded in the range 200–800 nm. From the optical absorption edges studies, the optical band gap (E _opt) and the Urbach energy (E _e) values have been evaluated by following the available semi-empirical theories. The linear variation of (αhν)^1/2 with hν, is taken as evidence of indirect interband transitions. The E _opt values were found to decrease with increasing Li₂O content by causing increase in the number of non-bridging oxygens in network. The Urbach tail analysis gives the width of localized states between 0.48 and 0.74 eV.