Oxazolidines versus schiff bases

The formation of oxazolidines from propionaldehyde and aliphatic β-aminoalcohols is complicated by the appearance of appreciable amounts of unsaturated Schiff bases. The simple Schiff base, often the dominant species when aromatic aldehydes react with amines, could not be detected in the present aliphatic systems. We conclude that in aliphatic systems the order of stability is and . The gem-dimethyl group α to nitrogen stablizes the heterocyclic ring remarkably.     

Massenspektrometrische Untersuchung organischer Stickstoffverbindungen. XXVII—Intramolekulare Redoxreaktionn bei ionisierten ortho-substituierten Nitroaromaten

Collisional activation demonstrates that the stable ions from o-nitrobenzaldehydedimethylacetale possess the structure of ionized o-nitroso benzoic acid methyl ester. Contrary to previous conclusions it is demonstrated that the structure of the stable ions (m/e 135) from different precursors [i.e. o-nitrobenzyl alcohol o-nitrobenzyl cyanide and o-nitrobenzaldoxime is best represented by 2,1-benzisoxazoline-3-one. Ionized o-nitrosobenzaldehtde rearranged to 2,1-benzisoxazoline-3-one prior to collision induced decomposition, whereas 2-benzoxazolinone and 3-hydroxy-1,2-benzisoxazole do not rearrange within 10^?5 s.     

ESR evidence for main-chain scission produced by mechanical fracture of polymers at low temperature

ESR spectra have been observed from several polymers (polyethylene, polypropylene, polymethylmethacrylate, polytetrafluoroethylene, and polybutadiene) which were mechanically fractured in vacuum at 77°K. The spectra permit identification of the free radicals produced in chain scission. It has been demonstrated for the polymers of the type such as polypropylene and poly(methyl methacrylate), that the mechanical fracture produces two different scission radicals in pairs, namely, The results indicate convincingly that microscopic scission of polymer chains is caused by macroscopic destruction of polymeric material. The critical molecular size for mechanical rupture of polyethylene chains was experimentally determined to be a degree of polymerization between 70 and 100. This size agrees fairly well with the value predicted from a theoretical model.     

Synthesis of titanium polyesters

Titanium polyesters of the form where Cp denotes cyclopentadiene, have been synthesized by utilizing both the interfacial and solution techniques. Polymer yield increases with reaction time. The reactive titanium reactant in the solution polycondensations is believed to be the Cp₂Ti⁺² cation.     

Three‐component,one‐pot synthesis of pyrimido[4,5‐b]‐quinoline and pyrido[2,3‐d]pyrimidine derivatives

Reaction of 6‐amino‐2‐methylthiouracil and 6‐amino‐1,3‐dimethyluracil with equimoler amounts of cyclic ketones or cyclic 1,3‐diketones and the appropriate aromatic aldehydes yielded regioselectivity a series of polycyclic pyrimido[4,5‐b]quinoline and pyrido[2,3‐d]pyrimidine derivatives in good yields.     

Salt effects in the base-catalyzed polymerization of unsaturated amide compounds. II. Polymerization of p-vinylbenzamide and acrylamide

In the presence of a variety of inorganic salts, p-vinylbenzamide underwent vinyl-type polymerization by anionic initiators to form the polystyrene derivative, whereas in dimethyl sulfoxide as solvent the aromatic polyamide was always obtained through a proton-transfer mechanism regardless of the presence of the salts. In the presence of of the salts, acrylamide is generally polymerized to the polyamide through a proton transfer reaction.     

Synthesis of 2‐alkyl‐4,5‐aryl‐2H‐[1λ6,2,3,6]‐thiatriazine‐1,1‐dioxides

Sulphamoyl chlorides and chlorosulphonyl isocyanate react with monosubstituted hydrazones and alkylhydrazonates to sulphamoyl hydrazones and sulphamoyl hydrazonates respectively. Reaction of benzil monoalkylhydrazones with chlorosulphonyl isocyanate results in formation of 2‐alkyl‐4,5‐aryl‐2H‐ [1λ⁶,2,3,6]‐thiatriazine‐1,1‐dioxides.     

Synthesis and properties of polyamides containing imidazoline rings

The novel polyamide containing an imidazoline ring(PAI) was synthesized by a two-stage melt polymerization of dimethyl terephthalate (DMT) with diethylenetriamine (DETA) or triethylenetetramine (TETA). The heat resistance of PAI was superior to that of polyamide which was synthesized only in the first-stage reaction and didn't contain imidazoline ring. Their chemical structures were identified by infrared spectroscopy and NMR. The optimum condition for production was studied by varying several reaction factors, including the contents of H₂O and H₃PO₄, the reaction temperature and the reaction time at second-stage reaction under vacuum. According to study of the characteristics of solution behavior of PAI, both the viscosity and the degree of cyclization could be described by equation of in m-cresol at 30°C.     

Zur Darstellung von Cyclophosphaten,Cyclophosphatophosphonaten, Diphosphonaten und Diphosphiten in Harnstoffschmelzen

Preparation of Cyclophosphates, Cyclophosphatophosphonates, Diphosphonates, and Di-phosphites in Urea Melts Ammonium cyclotriphosphate (NH₄)P₃O₉, ammonium cyclotetraphosphate [P^IV? P^IV ? O? ]₂, ammonium cyclotriphosphatophosphonates Ammonium organyldiphosphonates And ammonium diphosphites are prepared in high yields on heating acidic phosphates, phosphonates, and phosphites in urea or urea/ammonium nitrate melts. The mechanism of the dehydration of phosphorus compounds containing POH groups in molten urea is discussed.     

Flash photolysis of s-trinitrobenzene solutions

Flash photolysis of s-trinitrobenzene (TNB) aerated solutions in alcohols generates a transient species with absorption maxima at 430 and 510 nm. The yield of the transient is a function of oxygen concentration, and its rate of formation is viscosity dependent. In deaerated solutions instead of the transient, a brown permanent product, identified as a charge transfer (CT) complex with absorption maxima at 470 and 550 nm, is produced. These species are formed only in polar solvents with relatively high proton affinity. The data suggest an intermolecular proton transfer, from electronically excited TNB to the solvent forming the anion The anion thereby produced interacts with oxygen in aerated alcohols to form the transient attributed to CT complex while in deaerated alcohols the anion reacts with the solvent to produce RO^?, which leads to the CT complex RO…^?TNB. This mechanism is supported by detailed kinetic and spectroscopic studies.     

Deuterium isotope effects on 13C nuclear shielding as a measure of tautomeric equilibria

Large deuterium isotope effects of both signs have been observed on the ¹³C nuclear shielding in proton-chelating tautomeric forms of β-thioxoketones, and small isotope effects of both signs have been found in related forms of Schiff's bases of salicylaldehydes. These effects are interpreted in terms of shifts in the tautomeric equilibria on deuterium substitution of the enolic proton. The observation of deuterium isotope effects is suggested as a useful method for the detection of fast tautomeric equilibria in systems of the following type. .     

The loss of CH3⋅ from some unsaturated dithioesters

The mechanism for the loss of CH₃? (and C₂H₅?) from the molecular ions of some unsaturated dithioesters of the type with n=0, 1, 2, has been studied. Based on first field free region metastable ion characteristics it is proposed that 1,3-dithiolium type product ions are generated. Deuterium labelling experiments indicated that the molecular ions of the 2-alkenyl alkanedithioates undergo a rearrangement prior to fragmentation which resembles the [3,3]sigmatropic rearrangement in solution chemistry.     

A novel one‐pot oxidative deformylation of N‐formyldihydroquinolines employing ferric chloride hexahydrate. Synthesis of 4‐chloro‐2‐phenylquinolines and 4‐chloro‐2‐(1,3‐diphenyl‐1H‐pyrazol‐4‐yl)quinolines

A novel versatile one‐pot oxidative deformylation approach has been developed to synthesize 4‐chloro‐2‐phenylquinolines and 4‐chloro‐2‐(1,3‐diphenyl‐1H‐pyrazol‐4‐yl)quinolines from the corresponding N‐formyldihydroquinolines.     

The double-melting behavior of poly(ether diphenyl ether ketone)

Poly(ether diphenyl ether ketone) (PEDEK) synthesized by the nucleophilic route has the following chemical structure: At some given temperatures for a given time isothermally crystallized PEDEK sample exhibits two endothermic peaks which are similar to PEEK and PEEKK. The melting behavior of PEDEK crystallized from the glassy state is investigated through differential scanning calorimeter (DSC). We consider that the high-melting peak is related to the perfect crystals and the low-melting peak is associated with a few imperfect crystals. © 1997 John Wiley & Sons, Inc.     

Glass Transition Temperature Depression at the Percolation Threshold in Carbon Nanotube–Epoxy Resin and Polypyrrole–Epoxy Resin Composites

Summary: The glass transition temperatures of conducting composites, obtained by blending carbon nanotubes (CNTs) or polypyrrole (PPy) particles with epoxy resin, were investigated by using both differential scanning calorimetry (DSC) and dynamical mechanical thermal analysis (DMTA). For both composites, dc and ac conductivity measurements revealed an electrical percolation threshold at which the glass transition temperature and mechanical modulus of the composites pass through a minimum.

DC conductivity, σ_dc, as a function of the conducting filler concentration of the CNT– (▪) and PPy– (○) epoxy resin composites.     

Studies on Radical Cations I. Molecular and electronic structure of [3]radialene cation produced by γ-irradiation in condensed phase

γ-Irradiation of tris (methylidene)-cyclopropane (‘[3]radialene’) 1 in a rigid electron scavenging matrix (butylchoride/i-pentane, 1:1) at 77 K leads to formation of its molecular cation 1 ⁺. Slight softening of the matrix by a temperature increase of 3–5 K results in formation of a newly absorbing species, tentatively assigned arising from structrral relaxation of 1 ⁺ by π-bond rotation:      

RAFT Polymerization and Thiol Chemistry: A Complementary Pairing for Implementing Modern Macromolecular Design

Reversible addition fragmentation chain transfer (RAFT) polymerization is one of the most extensively studied reversible deactivation radical polymerization methods for the production of well‐defined polymers. After polymerization, the RAFT agent end‐group can easily be converted into a thiol, opening manifold opportunities for thiol modification reactions. This review is focused both on the introduction of functional end‐groups using well‐established methods, such as thiol‐ene chemistry, as well as on creating bio‐cleavable disulfide linkages via disulfide exchange reactions. We demonstrate that thiol modification is a highly attractive and efficient chemistry for modifying RAFT polymers.

     

Factors determining relative ionic abundances in competing fragmentation reactions

For the competing fragmentation reactions [la] and [Ib], it is shown that the relative abundances of [R₁]⁺ and [R₁]⁺ are determined by the relative values of the ionization potentials of the corresponding free radicals R₁^. and R₂^. In most cases the appearance potentials of [R]⁺ from RH follow the trends shown by the radical ionization potentials with the result that the appearance potentials can be used to correlate relative ionic abundances. The potential usefulness of relative abundances to estimate radical ionization potentials is illustrated.     

A Facile Method for Controlling the Molecular Weight of Hyperbranched Light‐Emitting Polymers

Summary: Two series of hyperbranched conjugated polymers were synthesized via an A₃ + B₂ type Wittig reaction. The molecular weights of the polymers were successfully tuned by simply changing the feed ratio of the monomers. Polymers with higher molecular weights presented more efficient photoluminescence, higher thermal stability and higher performance of LEDs.