Metal or ammonium alginates as Lewis base catalysts for the 1,2-addition of silyl nucleophiles to carbonyl compounds

Several metal (Na⁺, Ca²⁺) or ammonium (n-Bu₄N⁺) derivatives of alginic acid, an abundant bio-polymer obtained from the cell walls of brown algae, were synthesized. Their potential to act as organocatalysts to catalyze the 1,2-addition of various silyl derivatives to carbonyl compounds was evaluated for the first time. Ammonium alginate 1h is able to promote the reaction in modest to good isolated yields (up to 98%) affording access to a large range of substrates (β-cyano alcohols or ester, β-substituted methylacrylate or acrylonitrile, and cyanohydrin) by using only 5 mol % of catalyst.     

Synthesis of aryl alkynyl carboxylic acids and aryl alkynes from propiolic acid and aryl halides by site selective coupling and decarboxylation

The coupling of propiolic acid with aryl iodides afforded the aryl alkynyl carboxylic acids and aryl alkynes in generally good yields. Aryl alkynyl carboxylic acids were obtained when the reaction was performed in the presence of Pd(PPh₃)₂Cl₂ (2.5 mol %), dppb (5.0 mol %) and DBU (5 equiv) at 50 °C. For the synthesis of the terminal aryl alkynes, the reaction was conducted in the presence of Pd(PPh₃)₂Cl₂ (2.5 mol %), dppb (5.0 mol %), DBU (5.0 equiv), and Cu(acac)₂ (10 mol %) at 25 °C for 5 h, and further reacted at 60 °C for 6 h.     

Dual role of the six-coordinated molybdenum and lead ions in novel of photochromic properties of the molybdenum–lead–borate glasses

Transparent glasses were prepared by conventional melting–quenching method in the xMoO₃·(100 ? x)[3B₂O₃·PbO] system where 0 ≤ x ≤ 15 mol%. By increasing the MoO₃ content up to 20 mol% the PbMoO₄ crystalline phase appears. These systems exhibit a photochromic effect which can be induced through laser exposures (λ = 633 nm) directly on the bulk sample. Structural investigations by FTIR spectroscopy show that the photosensitive effect is due to a reduction of Mo⁶⁺ to Mo⁴⁺ and/or Mo⁵⁺ promoted by the oxidation of Pb²⁺ and some structural changes of the borate network.     

Highly effective activation of aryl chlorides for Suzuki coupling in aqueous media using a ferrocene-based Pd(II)–diimine catalyst

The Suzuki coupling of aryl chlorides with boronic acids using a ferrocene-containing Pd(II)–diimine complex as catalyst, in aqueous media, under microwave heating is reported. A small amount of the catalyst (0.1%) was found to be highly effective for coupling unactivated aryl chlorides with boronic acids to form sterically hindered ortho-substituted biaryls. The same catalyst also enabled the coupling of aryl bromides and iodides with various boronic acids in very high yields. The catalyst is air stable and the catalytic reaction can be completed in 15 min.     

The determination of trace lead in drinking water by flow injection spectrophotometry

Lead is the non-essential trace element in the human body, and it has been confirmed that drinking water is one of the sources of lead in human body. In the research, based on the sensitive colour reaction of lead with I^?–EV⁺–PVA, a simple, sensitive, accurate and portable method for the determination of trace lead in drinking waters was proposed. Chemicals and physicals had been optimized in detail. The apparent molar absorption coefficient was up to 7.4 × 10⁵ mol L^?1 cm^?1. The developed method provided a linearity range over 5–80 μg L^?1. The regression deviation was between 0.71% and 2.33%. The 3σ detection limit was 0.9 μg L^?1. Close to the quantitation limit for the analyte the relative standard deviation was 1.10% (n = 10) at 40 μg L^?1. The method developed here for analysis of lead yielded results that were comparable with those of the GFAAS.     

Palladium-catalysed direct arylations of NH-free pyrrole and N-tosylpyrrole with aryl bromides

The palladium-catalysed direct coupling of aryl halides with pyrroles provides a greener access to arylated pyrroles than more classical couplings such as Suzuki, Stille or Negishi reactions. However, so far, NH-free pyrrole and N-tosylpyrrole gave disappointing results for such couplings either in terms of regioselectivity of the arylation, catalyst loading or substrate scope. The reactivity of both NH-free pyrrole and N-tosylpyrrole was studied, and the tosylated pyrrole led to higher yields of coupling products due to better conversions of the aryl bromides. A range of aryl bromides undergo regioselective coupling at C2 of N-tosylpyrrole in moderate to good yields using 1 mol % [Pd(Cl(C₃H₅)]₂ as the catalyst, KOAc as the base in DMAc.     

Li(4−x)/3Ti(5−2x)/3CrxO4 (0 ≤ x ≤ 0.9) spinels: New negatives for lithium batteries

Members of the spinel solid solution between Li_4/3Ti_5/3O₄ and LiCrTiO₄, i.e., Li_(4−x)/3Ti_(5−2x)/3Cr_xO₄ (0 ≤ x ≤ 0.9), have been investigated as possible negative electrodes for future lithium-ion batteries. Electrochemical behaviour have been studied over the potential range 1–3.5 V vs Li⁺/Li. Results are promising with anodic capacities between 129 and 163 mA h/g with a flat operating voltage at about 1.5 V, which is attributed to the pair Ti⁴⁺/Ti³⁺. The inclusion of Cr³⁺ in the spinel structure enhances the specific capacity. In-situ X-ray diffraction experiments confirm that the reaction proceeds in a topotactic manner.     

Lipase catalyzed acylation of primary alcohols with remotely located stereogenic centres: the resolution of (±)-4,4-dimethyl-3-phenyl-1-pentanol

Enantioselective acylation of some (±)-3-alkyl-3-phenyl-1-propanols was performed with enzymes as catalysts. Moderate enantiomeric ratios (E), ranging up to E = 11.6, were obtained. In the resolution, some of the lipases selectively acylated the (+)-enantiomer while others acylated the (−)-enantiomer of the γ-substituted primary alcohols 1–4. Thus, it is possible to obtain both enantiomers of the alcohols as remaining substrate with high enantiomeric purity. The resolution of (±)-4,4-dimethyl-3-phenyl-1-pentanol 4 was extensively studied and screening experiments were conducted to select suitable lipase(s), reaction medium, acyl donor and appropriate temperature combinations to increase the enantiomeric ratio. Chirazyme^® L-6/chloroform/vinyl propionate/38 °C and Chirazyme^® L-7/di-iso-propyl ether/vinyl propionate/0 °C were chosen to obtain both enantiomers, (R)-(+)-4 and (S)-(−)-4, respectively, via sequential resolutions in excellent enantiomeric excess (>98%) and in 25% and 22% yield, respectively.     

Synthesis,characterization and catalytic behaviors of neutral nickel complexes: Arylnickel N-alkyl-6-(1-(arylimino)ethyl)picolinamide

A series of novel neutral nickel complexes, aryl (phenyl or naphthyl) nickel N-alkyl-6-(1-(arylimino)ethyl)picolinamides, were synthesized and characterized by NMR and IR spectroscopy and elemental analysis. Single-crystal X-ray diffraction analyses of the complexes C2, C3 and C7 reveal distorted square-planar geometry along with the molecular structure of one free ligand L1. On activation with diethylaluminum chloride (Et₂AlCl), the nickel complexes exhibited moderate catalytic activities for ethylene oligomerization, and the catalytic activity was up to 2.45 × 10⁵ g mol^?1(Ni) h^?1 in the presence of 1 equiv. PPh₃. Moreover, these complexes also exhibit moderate activities for Kumada–Corriu reaction and polymerization of methyl methacrylate.     

Synthesis of unsymmetrically disubstituted ethynes by the palladium/copper(I)-cocatalyzed sila-Sonogashira–Hagihara coupling reactions of alkynylsilanes with aryl iodides,bromides, and chlorides through a direct activation of a carbon–silicon bond

In this paper, we explore the copper/palladium-cocatalyzed cross-coupling reactions of 1-aryl-2-trimethylsilylethynes with aryl iodides, bromides, and chlorides as coupling partners, to furnish unsymmetrically disubstituted ethynes in moderate to excellent yields. Various aryl iodides were subjected to reaction under the optimized conditions with 5 mol % of Pd(PPh₃)₂ and 50 mol % of CuCl. The steric properties of the aryl iodide proved more influential to the outcome of the cross-coupling reaction than electronic factors. In addition, we succeeded in synthesizing unsymmetrical diarylethynes using two different aryl iodides in one-pot. Furthermore, under the same reaction conditions with 10 mol % of PdCl₂, 40 mol % of P(4-FC₆H₄)₃, and 50 mol % of CuCl as catalyst, we succeeded in synthesizing unsymmetrical diarylethynes from various aryl bromides. Finally, we explored reactions with aryl chlorides and duly discovered that unsymmetrical diarylethynes were obtainable in moderate to good yields when 10 mol % of Pd(OAc)₂, 10 mol % of (?)-DIOP, and 10 mol % of CuCl were used. These reactions proceed through a direct activation of a carbon–silicon bond in alkynylsilanes by CuCl to generate the corresponding alkynylcopper species via transmetalation from silicon to copper. Mechanistic investigations on the reaction of alkynylsilanes with aryl bromides confirmed that the trimethylsilyl bromide generated in situ retarded both transmetalation steps between CuCl and alkynylsilane, and between palladium(II) species formed by oxidative addition and alkynylcopper species.     

Synthesis,structural characterization and magnetic properties of a novel metallacrown [Fe6(amshz)6(C3H7NO)6]·6CH3OH

The novel 18-metallacrown-6 metallamacrocycle, with the formula of [Fe₆(amshz)₆(C₃H₇NO)₆]·6CH₃OH (1), has been synthesized by the self-assembly reaction of iron ions with N-substituted salicylhydrazide ligands. Six Fe(III) ions and six deprotonated N-acetyl-3-methylsalicylhydrazide (amshz^3?) ligands construct a planar 18-membered ring based on Fe–N–N–Fe linkage. Due to the coordination, the ligand enforces the stereochemistry of the Fe³⁺ ions as a propeller shape with alternating …ΔΛΔΛ… configurations. There exists a strong antiferromagnetic exchange interaction with μ_eff = 12.54 μ_B at 300 K between the Fe(III) spin 5/2 centers.     

Cavity ring-down observation of Yb3+ optical absorption in room temperature solution

Cavity ring-down spectroscopy is used to probe the optical absorption of the optical pseudo-two level system [Xe]4f¹³ Yb³⁺ in room temperature solution, a situation where the two-color pump-probe luminescence approach commonly used to study the other [Xe]4fⁿ (2 ≤ n ≤ 12) trivalent lanthanide ions fails. A 1 m optical cavity constructed from two highly reflective mirrors is used to obtain ring-down signals as a function of wavelength from 1 mL samples contained in a quartz cuvette placed in the center of the cavity. Absorption spectra constructed from these signals characteristic of the ⁶H_15/2 → ⁴F_9/2 [Xe]4f⁵ Dy³⁺ and the ⁷F₀ → ⁵D₀ [Xe]4f⁶ Eu³⁺ transitions are presented and compared to the corresponding single pass absorption and two-color pump-probe luminescence spectra to obtain sensitivity estimates. Finally the spectrum for the ²F_5/2 → ²F_7/2 [Xe]4f¹³ Yb³⁺ transition for a model Yb³⁺ complex in room temperature solution is obtained using cavity ring-down spectroscopy for the first time.     

Investigation of steam reforming of acetic acid to hydrogen over Ni–Co metal catalyst

Catalytic generation of hydrogen by steam reforming of acetic acid over a series of Ni–Co catalysts have been studied. The catalyst with the molar ratio of 0.25:1 between Ni and Co was superior to other catalysts. The effects of reaction temperature, liquid hourly space velocity (LHSV) and molar ratios of steam-to-carbon (S/C) were studied in detail over this catalyst. At T = 673 K, LHSV = 5.1 h⁻¹, S/C = 7.5:1, the catalyst exhibited the best performances. Acetic acid was converted completely to hydrogen, while H₂ selectivity reached up to 96.3% and CO₂ selectivity up to 98.1% was obtained, respectively. Ni–Co catalyst showed rather stable performances for the 70 h time-on-stream without any deactivation.     

Enhancement of electrochemical performance and thermal compatibility of GdBaCo2/3Fe2/3Cu2/3O5+δ cathode on Ce1.9Gd0.1O1.95 electrolyte for IT-SOFCs

Transition-metal doped double-perovskite structure oxides GdBaCo_2/3Fe_2/3Ni_2/3O_5+δ (FN-GBCO), GdBaCo_2/3Fe_2/3Cu_2/3O_5+δ (FC-GBCO), GdBaCoCuO_5+δ (C-GBCO) and pristine GdBaCo₂O_5+δ (GBCO) were synthesized via a citrate combustion method. The thermal-expansion coefficient (TEC) and electrochemical performance of the oxides were investigated as potential cathodes for intermediate-temperature solid oxide fuel cells (IT-SOFCs). The TEC exhibited by the FC-GBCO cathode up to 900 °C is 14.6 × 10^?6 °C^?1, which is lower than the value of GBCO (19.9 × 10^?6 °C^?1). Area specific resistances (ASR) of 0.165 Ω cm² at 700 °C and 0.048 Ω cm² at 750 °C were achieved for the FC-GBCO cathode on a Ce_0.9Gd_0.1O_1.95 (CGO) electrolyte. An electrolyte supported (300 μm thick) single-cell configuration of FC-GBCO/CGO/Ni-CGO attained a maximum power density of 435 mW cm^?2 at 700 °C. The unique composition of GBCO co-doped with Fe and Cu ions in the Co sites exhibited reduced TEC and enhancement of electrochemical performance and good chemical compatibility with CGO, and this composition is proving to be a potential cathode for IT-SOFCs.     

The effect of activation on the electrochemical behaviour of graphite felt towards the Fe3+/Fe2+ redox electrode reaction

This paper is dedicated to the study of the effect of graphite felt activation by thermal oxidation in air on its electrocatalytic activity towards Fe³⁺/Fe²⁺ redox electrode reaction. For the first time, the exchange current densities and electron transfer coefficients determined from the Tafel equation were obtained within the wide range of burn-off levels (0–50%). The maximal catalytic activity was obtained at the burn-off of 17%. The cathode having this burn-off level expressed almost three-fold enhancement in the galvanic cell performance (criterion for the performance evaluation in our case was a cell voltage at the current density of 300 mA cm⁻²) as compared to that with the non-activated graphite felt, and allowed to obtain current densities up to 670 mA cm⁻² at the cathode polarization as low as 150 mV. The correlation between electrocatalytic activity and a surface oxide chemistry of graphite felt was established. The cell performance was found to be the best when the pH at a point of zero charge and the amount of surface quinoid groups per unit area were minimal. The results obtained are of significant importance for practical applications, including the development of electrodes in redox flow batteries.     

Effective and recyclable dendritic catalysts for the direct asymmetric Michael addition of aldehydes to nitrostyrenes

Direct catalytic enantio- and diastereoselective Michael addition reaction of aldehydes to nitrostyrenes is described using a series of recyclable chiral 2-trimethylsilanyloxy-methyl-pyrrolidine-based dendritic catalysts. Good yields (up to 82%), and high diastereoselectivities (up to syn/anti = 95/5) and enantioselectivities (up to 99% ee) have been obtained.     

Electron excitation coefficients of neutral and ionic levels of krypton in Townsend discharges

In this paper, we present experimental results for excitation coefficients of krypton atoms to several Kr and Kr⁺ excited levels for E/N (electric field to gas particle number density ratio usually in units of Townsend, 1 Td = 10^− 21 V m²) values from 7 × 10^− 20 V m² to above 1 × 10^− 17 V m². The data have been obtained in two different parallel plate self-sustained Townsend discharge drift tubes. The spatial distribution of the emission intensities were recorded and then normalized to give excitation coefficients at the anode, by using the electron flux at this point. The values of these coefficients are placed on an absolute scale by using a standard tungsten ribbon lamp calibrated against a primary blackbody radiation standard. The ionization rates at different E/N are obtained from the spatial emission profiles.The data for atomic krypton levels 2p₂, 2p₃, 2p₅, 2p₆, 2p₇, 2p₈, 3p₅ and 3p₆ (in Paschen notation) were converted to excitation coefficients by using quenching coefficients from the literature. The emission coefficients of eight 4s²4p⁴ (³P)5p levels of Kr⁺ have also been measured for E/N values from about 1 × 10^− 18 V m² up to nearly 8 × 10^− 18 V m².     

Preparation of (2,2-difluoroethenylidene)bis(tributylstannane) and arylation reaction: efficient approach to 1,1-diaryl-2,2-difluoroethenes

Reaction of 2,2-difluoro-1-tributylstannylethenyl p-toluenesulfonate (1) with bis(tributyltin) in the presence of 5 mol % Pd(PPh₃)₄ and 30 equiv LiBr in THF at reflux temperature for 7 h afforded (2,2-difluoroethenylidene)bis(tributylstannane) (2) in a 70% yield. Coupling reaction of 2 with aryl iodides in the presence of 5 mol % Pd(PPh₃)₄ and 5 mol % CuI in DMF at 80 °C for 3–4 h provided the coupled products 3 in 59–85% yields.     

Complex formation between manganese(II), cobalt(II), nickel(II), copper(II) and a series of new ligands derived from N,N′-O-phenylenebis(salicylideneimine)

A series of new ligands derived from N,N′-O-phenylenebis(salicylideneimine) have been synthesized and characterized by spectrometric methods. Their protonation constants and the stability constants of their complexes with Mn²⁺, Co²⁺, Ni²⁺ et Cu²⁺ have been determined by potentiometric methods in a water–ethanol (90:10 v/v) mixture at a 0.2 mol l⁻¹ ionic strength (NaCl) and at 25.0 ± 0.1 °C. The Sirko program was used to determine the protonation constants as well as the binding constants of both species [M(HL)]⁺ and [ML]. The stability order obtained is in agreement with Irving–Williams series.