Synthesis of two new p-tert-butylcalix[4]arene β-ketoimin derivatives for extraction of dichromate anion

In this study the selective derivatization of p-tert-butylcalix[4]arene was carried out and two new p-tert-butylcalix[4]arene β-ketoimin, 5,11,17,23-tetra-tert-butyl-25,27-bis-3-methyl-[(β-ketoimine)-ethoxy]-26,28-dihydroxycalix[4]arene (4), and 5,11,17,23-tetra-tert-butyl-25,27-bis-3-chloro-[(β-ketoimine)-ethoxy]-26,28-dihydroxycalix[4]arene (5) have been synthesized. In the synthesis, the lower rim of p-tert-butylcalix[4]arene was modified in order to acquire binding site for the recognition of dichromate anion. It was observed that these ionophores 4 and 5 showed high affinity towards dichromate anion. The protonated Schiff-base forms of the receptors were effective for transferring the HCr₂O₇ ^? anion from aqueous phase to a dichloromethane phase.     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Synthesis and characterization of novel calix[4]arene piperazine derivative for the extraction of transition metals and dichromate ions

This article displays the synthesis of N-(2-tosylato)ethylpiperazine (ii) and 5,11,17,23-tetra-tert-butyl-25,27-bis-(2-piprazinoethyl)-26,28-dihydroxycalix[4]arene (3). Compounds (ii) and 3 were characterized through elemental analysis, FT-IR, ¹H NMR and/or ¹³C NMR studies. The transition metal cations (Hg²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Cd²⁺) and dichromate anion were studied by liquid–liquid extraction experiment. The results showed that compound 3 has moderate but selective extraction ability for Hg²⁺ and dichromate anion. Comparison between extraction properties of compound 3 with previously reported 5,11,17,23-tetra-tert-butyl-25,27-bis(isoniazidylcarbonylmethoxy)-26,28-dihydroxy-calix[4]arene (4) and protonated pyridinium form of 4 (5) is also described.     

Functionalisation of the upper rim of calix[4]arene via alcoholysis and hydrosilylation reactions

Metalation of 5,17-dibromo-25,26,27,28-tetra propoxy calix[4]arene (1) with n-BuLi in THF at −78 °C gave organolithium reagent, which reacted with Me₂HSiCl to give 5,17-bis(dimethylsilyl)-25,26,27,28-tetra propoxy calix[4]arene (2). The Si-H groups of calixarene 2 were treated with methanol, ethanol, propanol, butanol, pentanol, hexanol, 2-propanol and 2-methyl propanol in the presence of Karstedt catalyst (platinum(0)-1,3-divinyl-1,1,3,3-tetramethyl disiloxane complex, solution in xylene) to give the corresponding 5,17-bis(alkoxydimethylsilyl)-25,26,27,28-tetra propoxy calix[4]arene (3). Moreover, calixarene 2 was easily functionalized with a variety of alkenes using Karstedt catalyst to give the corresponding organosilylated calix[4]arene (4).     

Alkali Metal Complexation. Binding Properties of cone and partial-cone Calix[4]arenes Bearing a Mixed (O 2 , O 2 ') Donor Set (O = Phosphine Oxide; O ' = Amide or Ester)

The stability constants of alkali metal complexes obtained from the followingO-substituted calix[4]arenes were determined by UV/Vis spectroscopy inmethanol at 20°C: 5,11,17,23-tetra-tert-butyl-25,27-bis(diethylcarbamoylmethoxy)-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene(cone-1), 25,27-syn-26,28-anti-5,11,17,23-tetra-tert-butyl-25,27-bis(diethylcarbamoylmethoxy)-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene (paco-1),5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonylmethoxy-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene(cone-2) and25,27-syn-26,28-anti-5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonylmethoxy-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene(paco-2). All ligands form 1:1 complexes with alkali metal cations. The amide-containing calixarenes were found to be more efficient for alkali metalcomplexation than those bearing ester substituents. While sodium ions are selectivelycomplexed by the two mixed amide-(phosphine oxide) calixarenes, the twoester-containing isomers cone-2 and paco-2 turned out to be selective towards potassium and rubidium ions, respectively. With allfour ligands the lowest stability constants were found for the lithium andcesium ions.     

Synthesis, characterization and electrochemical properties of two new calix[4]arene derivatives bearing two ferrocene imine or ferrocene amine units at the upper rim

A novel calix[4]arene derivative with two ferrocenyl Schiff-base groups at the upper rim 3 has been synthesized from 5,17-diformyl-25,27-dipropoxy-26,28-dihydroxy calix[4]arene and 4-ferrocenylaniline via condensation reaction. Reduction of 3 with sodium borohydride led to calix[4]arene derivative 4 with two amino ferrocenyl groups at the upper rim. The ferrocenyl Schiff-base calix[4]arene and its corresponding reduced amine have been purified and characterized by elemental analysis,¹H NMR, FTIR, Mass and UV-vis spectral data. Electrochemical properties of compounds 3 and 4 have been investigated. Cyclic voltammograms of 3 and 4 show reversible redox couples of ferrocene/ferrocinium at E_1/2=0.401 V and 0.346 V, respectively. Electrochemical studies show these redox active compounds electrochemically recognize trivalent lanthanides La³⁺ and Ce³⁺ and divalent Pb²⁺ and Cu²⁺cations. With ferrocenyl Schiff-base calix[4]arene 3 an anodic shift as large as 130 mV is observed on addition of one equivalent of Ce³⁺ ion. Also extraction properties of compound 4 towards some metal cations have been described. It has been observed that compound 4 has a good selectivity for metal cations Fe³⁺, Cu²⁺, Pb²⁺ and Cd²⁺ against Ni²⁺ and Co²⁺.     

Potentiometric evaluation of calix[4]arene anion receptors in membrane electrodes: phosphate detection

Ion-selective membrane electrodes doped with the urea- or thiourea-functionalised calix[4]arenes, 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-N′-(phenylureido)butyl]oxy]-26,28-dipropoxy calix[4]arene (I) and 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-(N′-phenylthioureido)-butyl]oxy]-26,28-dipropoxy calix[4]arene (II), were evaluated for anion sensing. Potentiometric results show that these calixarene ionophore-based membrane electrodes exhibit a good sensitivity to aqueous solutions of the monohydrogen orthophosphate species HPO₄²⁻ in the concentration range 5.0 × 10⁻⁵ to 1.0 × 10⁻¹ M, with near-Nernstian response slopes of −33.0 and −28.0 mV dec⁻¹ for ionophores I and II, respectively. Selectivity coefficient values for monohydrogen orthophosphate over a range of common anions were determined by the fixed interference and matched potential methods and indicated that these membrane electrodes exhibit a good selectivity for HPO₄²⁻ with respect to the other anions, including sulfate and nitrate.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

Synthesis and characterization of azocalix[4]arene ester and ketone derivatives incorporated in a polymeric backbone with bisphenol-A and their cation-binding properties

This study comprises synthesis and characterization of azocalix[4]arene compounds having copolymeric structures. The novel bisazocalixphenol-A and copolymer containing pendant azocalix[4]arene units with ester (5) and ketone (6) functionalities at their lower rim have been synthesized via diazo-coupling reaction. The phase transfer study is performed by liquid?Cliquid extraction method. It has been deduced from the observations that their precursors 25,26,27-tribenzoyloxy-28-hydroxy-5-(4-aminophenylazo)calix[4] arene (3), 25,27-diacetoniloxy-26,28-dihydroxy-5,17-(4-aminophenylazo)calix[4]arene (4) and bisazocalixphenol-A (5) show a good phase transfer affinity towards selected transition metal cations, unlike copolymer (6). These compounds are studied by the selective extraction of Fe³⁺ cation from the aqueous phase into the organic phase and it is carried out using compounds 1?C6. It is observed that the reduced azocalix[4]arene 4 is the most efficient (82.93?%) carrier of all compounds (3?C6) in the extraction of Fe³⁺ at pH 5.4.     

Synthesis and oxoanions (dichromate/arsenate) sorption study of N-methylglucamine derivative of calix[4]arene immobilized onto poly[(phenyl glycidyl ether)-co-formaldehyde]

The article describes synthesis as well as the evaluation of sorption properties of new N-methylglucamine substituted calix[4]arene and its poly[(phenyl glycidyl ether)-co-formaldehyde] immobilized product. Firstly, 5,17-bis-[(N-methylglucamine)methyl]-25,26,27,28-tetrahydroxy-calix[4]arene (3) was synthesized by the treatment of calix[4]arene with a secondary amine N-methylglucamine and formaldehyde via Mannich reaction. The immobilization of 3 onto poly[(phenyl glycidyl ether)-co-formaldehyde] to form calixarene based polymer (4) was carried out under suitable reaction conditions via nucleophilic substitution reaction. All the new compounds were characterized by a combination of FT-IR, ¹H-NMR spectroscopic and elemental analysis techniques. The sorption studies of 4 reveal that it is an excellent material for the removal of toxic oxoanions especially arsenate from aqueous environment. To understand the selectivity of 4, we also examined the retention of dichromate anions in the presence of Cl^?, NO₃ ^? and SO₄ ^2? anions at pH 1.5.     

Synthesis of a glutaraldehyde derivative of calix[4]arene as a cross-linker reagent for lipase immobilization

This article describes the synthesis of a new calix[4]arene 1,3-distal glutaraldehyde derivative 4 as a cross-linker-reagent for immobilization of Candida rugosa lipase (CRL). p-tert-Butylcalix[4]arene 1,3-distal diaminoalkyl derivative (3) synthesized via aminolysis reaction of 5,11,17,23-tert-butyl-25,27-ethoxycarbonylmethoxy-26,28-hydroxycalix[4]arene (2) with 1,8-diaminooctane. Compound 3 was converted to its aldehyde derivative (4) by the treatment with glutaraldehyde solution. 4 was used in lipase immobilization in order to see the role of calix[4]arene binding site on the lipase activity and stability. It was observed that the immobilized lipase activity was maintained at levels exceeding 95% of its original activity after 40 min.     

Utilization of transport efficacy of novel calix[4]arene-embedded polymer inclusion membrane towards trace metals

In this study, 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxy calix[4]arene was successfully synthesized from the reaction of calix[4]arene-dialkylbromide derivative with thiourea. The structure of 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxy calix[4]arene was fully characterized using ¹HNMR, ¹³CNMR and elemental analysis techniques. The obtained mercapto-substituted calix[4]arene derivative was employed as an additive material along with cellulose triacetate (CTA) and 2-nitrophenyl octyl ether (o-NPOE) for the preparation of a novel polymer inclusion membrane (C@PIM). The structure and surface morphology of mercapto-substituted calix[4]arene-embedded polymer inclusion membrane was determined using thermogravimetric analysis, scanning electron microscopy and elemental analysis techniques. Donnan dialysis system was also used to assess the transport efficacy of C@PIM towards Pb(II), Zn(II), Cu(II), Ni(II), Cd(II) and Co(II) ions. The results show that new C@PIM exhibited 99% transport efficacy but also selectivity toward Ni(II) and other ions.     

Synthesis of novel calix[4]arenes containing organosilicon groups

Metalation of (RSiMe₂)₃CH (1a R = H, 1b R = Me, 1c R = Ph) with lithium diisopropylamide (LDA) or methyllithium in THF gave organolithium reagents (RSiMe₂)₃CLi, which reacted with the formylated calixarene (2), to give the corresponding 5,17-bis[2,2-bis(organosilyl)-1-ethenyl]-25,26,27,28-tetrapropoxycalix[4]arenes (3a, 3b and 3c) via the Peterson olefination. The compounds (RSiMe₂)₃CLi were treated with 25,26,27,28-tetrakis(4-bromobutoxy)calix[4]arene (4) to give 25,26,27,28-tetrakis[4-(tris(dimethylsilyl)methyl)butoxy] calix[4]arene (5a) and 25,26,27,28-tetrakis[4-(tris(trimethylsilyl)methyl)butoxy] calix[4]arene (5b) via nucleophilic substitution reactions. However the compound 25,26,27,28-tetrakis[4-(tris(dimethylphenylsilyl)methyl)butoxy] calix[4]arene (5c) was not obtained, presumably because (PhSiMe₂)₃C- is highly sterically hindered and the reactivity of its derivatives is low. The compound 5a has potential as a core for dendrimers.     

Synthesis of two calix[4]arene diamide derivatives for extraction of chromium(VI)

The synthesis of four diamide derivatives of the p-tert-butylcalix[4]arenes from the reaction of 5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonylmethoxy-26,28-dihydroxycalix[4]arene 2 with various primary amines were reported. The ¹H and ¹³C NMR, data showed that the synthesized compounds exist in the cone conformation. The complexing properties of these compounds toward Cr₂O₇²⁻/HCr₂O₇⁻ anions are also studied. It has been observed that receptors 5 and 6 are better extractant than the compounds 3 and 4. The protonated alkyl ammonium form of 5 and 6 is an effective extractant for transferring HCr₂O₇⁻/Cr₂O₇²⁻ anions from an aqueous phase into a dichloromethane layer.     

Synthesis,characterization and metal ion complexation and extraction capabilities of calix[4]arene Schiff base compounds

The syntheses, characterization and metal ion complexation and extraction capabilities of six new calix[4]arene Schiff base compounds, 5–10, are reported. The preparation of the compounds was achieved by the condensation of 5,17-diamino-11,23-di-tert-butyl-25,27-di-n-butoxy-26,28-dihydroxycalix[4]arene with the appropriate aldehyde (5-bromosalicylaldehyde for 5, 4-anisaldehyde for 6, 4-(dimethylamino)benzaldehyde for 7, 9-anthracenecarboxaldehyde for 8, 1-pyrenecarboxaldehyde for 9, and 9-fluorenecarboxaldehyde for 10) in refluxing ethanol. The compounds were characterized by ¹H and ¹³C NMR spectroscopy, IR spectroscopy, high-resolution mass spectrometry and elemental analysis. The X-ray crystal structures of 7, 8 and 9 (as dichloromethane solvates) revealed that the calixarene molecules adopt H-bond stabilized, distorted-cone conformations and form centrosymmetric dimers in the solid state. Compounds 5–10 did not form host–guest complexes with NEt₄[(bdt)MoO₂(OSiPh₃)] (bdt^2–=benzene-1,2-dithiolate), a potential precursor for biologically relevant oxosulfido-Mo(VI/V) enzyme models; such host–guest complexes have the potential to stabilize these sought-after but highly reactive model compounds. In addition, the capabilities of 5–10 to extract selected metal ions (Ni²⁺, Co²⁺, Cu²⁺, Zn²⁺, Ag⁺, Pb²⁺, Cd²⁺ and Hg²⁺) from an aqueous into an organic phase have been assessed by picrate extraction experiments. Compound 5 displayed exceptional selectivity towards Ni²⁺, compound 7 exhibited enhanced extraction towards all of the metal ions tested and compounds 6, 9 and 10 showed very high selectivity towards Hg²⁺. On the other hand, compound 8 exhibited negligible capacity to extract any of the metal ions tested.     

Anion receptors based on ureido-substituted thiacalix[4]arenes and calix[4]arenes

The regioselective nitration of 25,27-dipropoxythiacalix[4]arene was carried out as a key step in the synthesis of thiacalix[4]arene derivative bearing two arylureido functions on the upper rim. The preorganisation of ureido units using the thiacalix[4]arene/calix[4]arene moieties as a molecular scaffold gave novel anion receptors. These compounds, albeit based on hydrogen bonding interactions, show good complexation ability even in highly HB-competitive solvent, such as DMSO. Direct comparison of otherwise identical structures 6a and 7a revealed remarkable dominance of the thiacalix[4]arene derivative over its classical analogue in anion binding.     

Synthesis of new calix[4]arenes containing nucleoside bases

A family of novel calix[4]arene derivatives containing nucleoside bases were designed and synthesized. Coupling reaction between para mono- or bis-amino calix[4]arenes 5, 6 or 7 and thymin-1-ylacetic acid in the presence of DCC afforded mono- or bis-thymine-substituted calix[4]arenes 8, 9 or 10 in over 70% yield. Owing to the low solubility of adenine-N⁹-ylacetic acid in DMF and DMSO and the weak nucleophilicity of aminocalix[4]arene derivatives, alternatively, the substitution reaction of bromoacetylated aminocalix[4]arenes derivatives 11, 12, 13 with adenine in the presence of sodium hydride was carried out to synthesize mono- or bis-adenine-substituted calix[4]arenes. Two kinds of isomers 15 and 16 or 17 and 18 were obtained due to the non-regiospecific alkylation of adenine, and their structures have been confirmed by ¹³C NMR and ¹H NMR spectra.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

Calix[4]arene Schiff bases—potential ligands for fluorescent studies

A series of novel double-armed calix[4]arene derivatives incorporating imine substituents were synthesised from the Schiff-base reaction of 25,27-bis[2-[(1-formyl-2-phenyl)oxy]ethyl]-p-tert-butylcalix[4]arene (1) with the appropriate amine or hydrazone. All compounds were characterised by various spectroscopic and analytical techniques, and in three cases, by X-ray crystallographic studies. In the case of compound 2, inclusion compounds were synthesised with both m-xylene and dimethylformamide and their X-ray structures revealed these inclusion sites—between the pendant arms and in the upper cavity, respectively. In all cases, the pendant arms are bent away from each rather than adopting a face-to-face conformation.     

Azobenzene-bridged calix[8]arenes

An azobenzene bridge was introduced into the lower (or smaller) rim of p-tert-butylcalix[8]arene (1) and 1,5-calix[8]crown-3 (2) to form 1,4-singly bridged (3) and 1,5:3,7-doubly bridged (4) calix[8]arene derivatives, respectively. Trans and cis isomers of conformationally rigid 4 were isolated. The quantum yields of the trans-cis photoisomerisation reactions have been measured.