Liposome layers characterized by quartz crystal microbalance measurements and multirelease delivery

Intact liposomes have been immobilized onto solid surfaces by a NeutrAvidin-biotin link. The construction of these layers has been followed up by X-ray photoelectron spectroscopy (XPS) and quartz crystal microbalance (QCM) measurements with energy dissipation monitoring. Also, the simultaneous release of two fluorescent probes from these liposome layers has been investigated with the aim to validate this method in multirelease delivery systems. XPS showed the successful immobilization of the different layers. XPS results also point out the importance of the deactivation method used to reveal the presence of the specific NeutrAvidin-biotin attachment. QCM measurements allowed the buildup of the different layers to be followed in real time and in situ and suggest that biotinylated liposomes stay intact upon surface attachment on NeutrAvidin-covered surfaces and had viscoelastic behavior. QCM experiments also demonstrated that surface-immobilized liposomes were able to resist irreversible adsorption from fetal bovine serum. Release kinetic profiles were studied by monitoring the release of two different fluorescent probes, namely, carboxyfluorescein and levofloxacin, from these liposome layers. These studies showed that it was possible to modulate to some extent the release rates of the two molecules by using different configurations of liposome layers.     

Covalent immobilization of liposomes on plasma functionalized metallic surfaces

A method was developed to functionalize biomedical metals with liposomes. The novelty of the method includes the plasma-functionalization of the metal surface with proper chemical groups to be used as anchor sites for the covalent immobilization of the liposomes. Stainless steel (SS-316) disks were processed in radiofrequency glow discharges fed with vapors of acrylic acid to coat them with thin adherent films characterized by surface carboxylic groups, where liposomes were covalently bound through the formation of amide bonds. For this, liposomes decorated with polyethylene glycol molecules bearing terminal amine-groups were prepared. After ensuring that the liposomes remain intact, under the conditions applying for immobilization; different attachment conditions were evaluated (incubation time, concentration of liposome dispersion) for optimization of the technique. Immobilization of calcein-entrapping liposomes was evaluated by monitoring the percent of calcein attached on the surfaces. Best results were obtained when liposome dispersions with 5mg/ml (liposomal lipid) concentration were incubated on each disk for 24h at 37°C. The method is proposed for developing drug-eluting biomedical materials or devices by using liposomes that have appropriate membrane compositions and are loaded with drugs or other bioactive agents.     

Nanoparticle-assisted surface immobilization of phospholipid liposomes

Phospholipid liposomes (100-200 nm diameter) are deposited onto solid substrates after stabilizing them against fusion with the solid by allowing charged nanoparticles to adsorb at approximately 25% surface coverage. The immobilized vesicles remain stable over a period of days. Epifluorescence imaging shows that they diffuse freely over surfaces with the same charge but adsorb tightly onto surfaces with opposite charge. Nanoparticle adsorption to surface patterns of opposite charge provides a facile method to create large-scale surface-supported arrays of intact liposomes. This surface attachment method is simple chemically and applies generally for solid surfaces that can be hydrophobic or hydrophilic. Offering routes to localize proteins and other vesicle-contained objects at surfaces in tailored spatial patterns, these immobilized liposome arrays may find diverse applications in the emerging field of nanobiotechnology.     

Polyion-induced liposomal vesicle aggregation: a radiowave dielectric relaxation study

The radiowave dielectric properties of aqueous heterogeneous systems during the complexation of charged polyions and oppositely charged liposomal particles have been measured in a wide frequency range, between 100 Hz and 2 GHz. The formation of a polyion-liposome complex driven by the correlated polyion adsorption at the particle surface implies two concomitant effects referred to as reentrant condensation and charge inversion. Both of them are governed by electrostatic interactions and there is now strong evidence, based on experiments and simulations, that counterion release is the driving force of the aggregation process. From this point of view, dielectric technique may offer a suitable tool in the investigation of the structural properties of these aggregates. In spite of the fact that interaction of polyions with oppositely charged surfaces was extensively experimentally investigated, there are no papers concerning the dielectric properties during the polyion-induced aggregation. To get an insight into this important topic, the authors present here an extensive set of radiowave dielectric measurements of liposomal vesicle aqueous suspensions where the liposome aggregation was induced by an oppositely charged polyion. The aggregation was followed from the beginning, when most of the isolated liposomes predominate, up to the formation of polyion-coated liposomes of inverted charge, crossing the isoelectric condition, where large, almost neutral, aggregates appear. The authors describe the observed dielectric dispersions as due to counterion polarization in the adjacency of the liposome and liposome aggregate surface, primarily governed by the zeta potential, according to the standard electrokinetic model.     

Immobilization of liposomes onto quartz crystal microbalance to detect interaction between liposomes and proteins

To study the interaction between liposomes and proteins, intact liposomes were immobilized on a metal planar support by chemical binding and/or bioaffinity using a quartz crystal microbalance (QCM). A large decrease in the resonance frequency of quartz crystal was observed when the QCM, modified by a self-assembled monolayer (SAM) of carboxythiol, was added to liposome solutions. The stable chemical immobilization of intact liposomes onto SAM was judged according to the degree with which adsorbed mass depended on the prepared size of liposomes, as well as on the activation time of SAMs when amino-coupling was introduced, where the liposome coverage of electrodes was 69+/-8% in optimal conditions. When avidin-biotin binding was used on amino-coupling liposome layers, liposome immobilization finally reached 168% coverage of the electrode surface. Denatured protein was also successfully detected according to the change in the frequency of the liposome-immobilized QCM. The adsorbed mass of denatured carbonic anhydrase from bovine onto immobilized liposomes showed a characteristic peak at a concentration of guanidine hydrochloride that corresponded to a molten globule-like state of the protein, although the mass adsorbed onto deactivated SAM increased monotonously.     

Flat hydrogel substrate for atomic force microscopy to observe liposomes and lipid membranes

In order to avoid denaturation of biomolecules due to strong adsorption on solid surfaces, a soft substrate has to be used for atomic force microscopy (AFM) observation. We propose a hydrophilic agarose gel surface as a soft substrate for AFM to observe liposomes and lipid membranes. Although our simple method does not require any delicate control at the molecular level, an agarose gel surface can be simply flattened to 0.3 nm in roughness using an atomically flat solid surface during gelation. The AFM images revealed that liposomes were unruptured on the gel surface at low liposome density, whereas an unruptured state was difficult to obtain on a solid surface like mica. This indicates that the weak interaction between the liposome and the soft surface inhibits the liposome from rupturing, and also that the surface rougher than the solid surface prevents lateral diffusion of the liposomes along the surface to be fused. Increasing the liposome density resulted in a lipid membrane at various thicknesses forming on the hydrogel surface by the fusion and rupture of liposomes. Using the soft substrate, it can be expected to promote investigations of structures and functions of biomolecules at the nanometer scale under physiological conditions with AFM.     

Arrays of lipid bilayers and liposomes on patterned polyelectrolyte templates

This paper presents novel methods to produce arrays of lipid bilayers and liposomes on patterned polyelectrolyte multilayers. We created the arrays by exposing patterns of poly(dimethyldiallylammonium chloride) (PDAC), polyethylene glycol (m-dPEG) acid, and poly(allylamine hydrochloride) (PAH) on polyelectrolyte multilayers (PEMs) to liposomes of various compositions. The resulting interfaces were characterized by total internal reflection fluorescence microscopy (TIRFM), fluorescence recovery after pattern photobleaching (FRAPP), quartz crystal microbalance (QCM), and fluorescence microscopy. Liposomes composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-dioleoyl-sn-glycero-3-phosphate (monosodium salt) (DOPA) were found to preferentially adsorb on PDAC and PAH surfaces. On the other hand, liposome adsorption on sulfonated poly(styrene) (SPS) surfaces was minimal, due to electrostatic repulsion between the negatively charged liposomes and the SPS-coated surface. Surfaces coated with m-dPEG acid were also found to resist liposome adsorption. We exploited these results to create arrays of lipid bilayers by exposing PDAC, PAH and m-dPEG patterned substrates to DOPA/DOPC vesicles of various compositions. The patterned substrates were created by stamping PDAC (or PAH) on SPS-topped multilayers, and m-dPEG acid on PDAC-topped multilayers, respectively. This technique can be used to produce functional biomimetic interfaces for potential applications in biosensors and biocatalysis, for creating arrays that could be used for high-throughput screening of compounds that interact with cell membranes, and for probing, and possibly controlling, interactions between living cells and synthetic membranes.     

Detachable immobilization of liposomes on polymer gel particles

Immobilization of liposomes on hydrophobized Sephacryl gel and controlled detachment of the liposomes from the gel were examined. The gel was chemically modified and bore octyl, hexadecyl or cholesteryl moiety via disulfide linkage as anchors to liposomal bilayer membrane. Upon interaction with the gel, egg phosphatidylcholine liposomes were successfully immobilized onto the gel. The gel with cholesteryl moiety showed 1.7 times higher liposome immobilization per anchor moiety than the gels with the alkyl moieties. The immobilization of liposomes on the gel was stable, and no significant spontaneous detachment of phospholipid or leakage of fluorescein isothiocyanate-conjugated dextran encapsulated in the immobilized liposomes was observed in 24h. Reductive cleavage of the disulfide linkage by dithiothreitol resulted in detachment of the liposomes from the gel. The majority of the detached liposomes were found encapsulating the dextran derivative, and these liposomes should have kept their structural integrity throughout the immobilization and the detachment processes. The release of the liposomes was insignificant until the ratio of the dithiothreitol to the hydrophobic anchor reached a threshold. The presence of the threshold suggests that the immobilization of liposomes should require a certain minimum number of the hydrophobic moieties anchored in the liposomal membrane. By applying the present immobilization-detachment system, preparation of liposomes encapsulating the dextran derivative without using costly gel filtration or ultracentrifugation procedure was successfully demonstrated.     

Liposomes as signal amplification reagents for bioassays in microfluidic channels

Liposomes with encapsulated carboxyfluorescein were used in an affinity-based assay to provide signal amplification for small-volume fluorescence measurements. Microfluidic channels were fabricated by imprinting in a plastic substrate material, poly(ethylene terephthalate glycol) (PETG), using a silicon template imprinting tool. Streptavidin was linked to the surface through biotinylated-protein for effective immobilization with minimal nonspecific adsorption of the liposome reagent. Lipids derivatized with biotin were incorporated into the liposome membrane to make the liposomes reactive for affinity assays. Specific binding of the liposomes to microchannel walls, dependence of binding on incubation time, and nonspecific adsorption of the liposome reagent were evaluated. The results of a competitive assay employing liposomes in the microchannels are presented.     

Liposome chromatography: liposomes immobilized in gel beads as a stationary phase for aqueous column chromatography

Liposomes have been used as a stationary phase for column chromatography with an aqueous mobile phase. They were immobilized in the pores of carrier gel beads by two methods: (A) hydrophobic ligands were coupled to the matrix of gel beads, which then were packed into a column and liposomes were applied and became associated with the ligands by hydrophobic interaction; and (B) phospholipids and detergent were dialysed in the presence of gel beads; many of the liposomes that formed in the pores of the beads were sterically immobilized by the gel matrix. Proteoliposomes containing red cell glucose transport protein in the lipid bilayers were immobilized in a column by method A. This column retained D-glucose longer than L-glucose. In contrast to L-glucose, D-glucose was transported into and out of the immobilized liposomes, causing an increased retention. Liposomes with (stearylamine)+ or (phosphatidylserine)- in their lipid bilayers were immobilized by method B and the gel beads were packed into a column. A protein of opposite charge was applied in excess. Under suitable conditions, the protein molecules became close-packed on the liposome surfaces. Ion-exchange chromatographic experiments with proteins showed that these sterically immobilized liposomes were also stable enough to be used as a stationary phase. The loss of lipids was 5-23% in the first run at high protein load and with sodium chloride gradient elution but was lower in subsequent runs. It is proposed that water-soluble molecules can be separated and their interactions with liposome surfaces studied by chromatography on immobilized liposomes in detergent-free aqueous solution. Membrane proteins can be inserted and ligands can be anchored in the lipid bilayers for chromatographic purposes.     

Azide-reactive liposome for chemoselective and biocompatible liposomal surface functionalization and glyco-liposomal microarray fabrication

Chemically selective liposomal surface functionalization and liposomal microarray fabrication using azide-reactive liposomes are described. First, liposome carrying PEG-triphenylphosphine was prepared for Staudinger ligation with azide-containing biotin, which was conducted in PBS buffer (pH 7.4) at room temperature without a catalyst. Then, immobilization and microarray fabrication of the biotinylated liposome onto a streptavidin-modified glass slide via the specific streptavidin/biotin interaction were investigated by comparing with directly formed biotin-liposome, which was prepared by the conventional liposome formulation of lipid-biotin with all other lipid components. Next, the covalent microarray fabrication of liposome carrying triphenylphosphine onto an azide-modified glass slide and its further glyco-modification with azide-containing carbohydrate were demonstrated for glyco-liposomal microarray fabrication via Staudinger ligation. Fluorescence imaging confirmed the successful immobilization and protein binding of the intact immobilized liposomes and arrayed glyco-liposomes. The azide-reactive liposome provides a facile strategy for membrane-mimetic glyco-array fabrication, which may find important biological and biomedical applications such as studying carbohydrate-protein interactions and toxin and antibody screening.     

The influence of chondroitin sulfate on composite multilamellar liposomes containing chitosan

A composite multilamellar liposome containing chitosan attached to the inside and outside of the membrane as well as an opposite charged polyelectrolyte, chondroitin, adsorbed at the surface was developed. Not only the chitosan/chondroitin ratio but also the concentration of them were varied. The structure and superficial properties of the liposomes were studied through a combination of light scattering, zeta potential, and small-angle X-rays scattering techniques. While the chitosan/chondroitin ratio affected the superficial charge distributions, the concentration of polyelectrolytes affected the structural properties of the liposomes, as the rigidity of the phospholipid layers. The superficial charge of the resultant composite liposome was influenced by the type and concentration of the polyelectrolyte. Information about the charge density could be obtained by the treatment of zeta potential data, and it was used to estimate the amount of chondroitin adsorbed to the liposome surface. Applying the modified Caillé theory to the X-rays scattering curves, information about the internal structure of the liposomes was accessed. The ability to control the properties of composite multilamellar liposomes is an important issue when they have to be applied as a biomaterial device component.     

The surface properties of phospholipid liposome systems and their characterisation

The field of liposome (vesicle) research has expanded considerably over the last 30 years. In physical chemical terms liposomes have many of the characteristics of colloidal particles and their stability is determined in part by the classical surface forces. It is now possible to engineer a wide range of liposomes varying in size, phospholipid composition and surface characteristics. The surfaces of liposomes can be modified by the choice of bilayer lipid as well as by the incorporation and covalent linkage of proteins (e.g. antibodies and sugar binding proteins [lectins]), glycoproteins and synthetic polymers. Much of the impetus for liposome design has come from their potential value as drug delivery systems. The development of technologies for the production of such a range of liposome systems has presented interesting problems in the characterisation of their properties. The review addresses the progress that has been made in characterising the surfaces of different types of liposomes with specific reference to their electrophoretic properties and their interpretation and the physical interactions between liposomal bilayers.     

Adsorption and disruption of lipid bilayers by nanoscale protein aggregates

Nanoparticles taken into biological systems can have biological impacts through their interactions with cell membranes, accompanied by protein adsorption onto the nanoparticle surfaces, forming a so-called protein corona. Our current research aims to demonstrate that nanoscale protein aggregates behave like such nanoparticles with regard to the interaction with lipid membranes. In this study, the adsorption and disruption of the lipid membranes by protein aggregates were investigated using amyloid fibrils and nanoscale thermal aggregates of lysozyme. Both types of protein aggregates had disruptive effects on the negatively charged liposomes, similar to polycationic nanoparticles. Interestingly, adsorption of liposomes on the amyloid fibrils preceding disruption occurred even if the net charge of the liposome was zero, suggesting the importance of hydrophobic interactions in addition to electrostatic interactions. The results of the present study provide new insights into the biological impacts of nanoparticles in vivo.     

Effect of amphiphilic drugs on the stability and zeta-potential of their liposome formulations: a study with prednisolone, diazepam, and griseofulvin

Multilamellar liposomes consisting of phosphatidylcholine and incorporating prednisolone (PZ), diazepam (DZ), or griseofulvin (GF) were prepared and characterized. Liposome size, surface charge, and stability (in buffer and serum proteins) were measured for drug-incorporating liposomes and empty liposomes for comparison. The results reveal that for all drugs studied drug incorporation has a substantial effect on the vesicle zeta-potential and stability. Drug-incorporating liposomes have a negative surface charge, while their membrane integrity is significantly higher when compared with that of empty liposomes. Release of DZ from liposomes is induced by dilution. Summarizing, the results of this study demonstrate that the presence of PZ, DZ, or GF in liposome membranes has a significant effect on main vesicle properties and correlates well with those obtained previously for hydrochlorothiazide and chlorothiazide. Thereby, we may conclude that the previously demonstrated effects of the thiazides on liposome properties are not solely related to their structure.     

Arraying of intact liposomes into chemically functionalized microwells

Here, we describe a protocol to bind individual, intact phospholipid bilayer liposomes, which are on the order of 1 microm in diameter, in microwells etched in a regular array on a silicon oxide substrate. The diameter of the wells is on the order of the liposome diameter, so only one liposome is located in each well. The background of the silicon oxide surface is functionalized with a PEG oligomer using the contact printing of a PEG silane to present a surface that resists the adsorption of proteins, lipid material, and liposomes. The interiors of the wells are functionalized with an aminosilane to facilitate the conjugation of biotin, which is then bound to Neutravidin. The avidin-coated well interiors bind the liposomes whose surfaces contain biotinylated lipids. The specific binding of the liposomes to the surface using the biotin-avidin linkage, together with the resistant nature of the background and the physical confinement of the wells, allows the liposomes to remain intact and to not unravel, rupture, and fuse onto the surface. We demonstrate this intact arraying using confocal laser scanning microscopy of fluorophores specifically tagging the microwells, the lipid bilayer, and the aqueous interior of the liposome.     

Complexation of polycations to anionic liposomes: composition and structure of the interfacial complexes

Poly(N-ethyl-4-vinylpyridinium bromide) (a polycation with a degree of polymerization of 1100) was adsorbed onto liposomes composed of egg lecithin with a 0.05-0.20 molar fraction (nu) of anionic headgroups provided by cardiolipin (a doubly anionic lipid). According to electrophoretic mobility data, this led to total charge neutralization of the liposomes, whereupon the liposomes adopted a positive charge as additional polymer continued to adsorb. Although the liposomes aggregated at the charge-neutralization point, they disassembled into individual liposomes after becoming positively charged. The degree of polymer adsorption was shown to reach a limit. Thus, by measuring the free polymer content in a liposome suspension, it was possible to determine the polymer concentration at which the liposome surface became saturated with polymer. Beyond this point, an electrostatic/steric barrier at the surface suppressed further adsorption. Dynamic light scattering studies of liposomes with and without adsorbed polymer allowed calculation of the polymer film thickness which ranged from 22 to 35 nm as the molar fraction of cardiolipin (nu) increased from 0.05 to 0.20. The greater the content on the anionic lipid in the bilayer, the thicker the polymer film. The maximum number of polymer molecules adsorbed onto the liposomes was estimated: 1-2 molecules for nu = 0.05; 3 molecules for nu = 0.1; 4- molecules for nu = 0.15; and 6 molecules for nu = 0.2. The polymer appears to lie on the liposome surface, rather than embedding into the bilayer, because addition of NaCl easily dislodges the polymer from the liposome into the bulk water.     

Liposomal glyco-microarray for studying glycolipid–protein interactions

A microarray enables high-throughput interaction screening of numerous biomolecules; however, fabrication of a microarray composed of cellular membrane components has proven difficult. We report fabrication of a liposomal glyco-microarray by using an azide-reactive liposome that carries synthetic and natural glycolipids via chemically selective and biocompatible liposome immobilization chemistry. Briefly, liposomes carrying anchor lipid dipalmitoylphosphatidylethanolamine (DPPE)-PEG(2000)-triphenylphosphine and ganglioside (GM1 or GM3) were prepared first and were then printed onto an azide-modified glass slide so as to afford a liposomal glyco-microarray via Staudinger ligation. Fluorescent dye release kinetics and fluorescence imaging confirmed successful liposome immobilization and specific protein binding to the intact arrayed glycoliposomes. The liposomal glyco-microarray with different gangliosides showed their specific lectin and toxin binding with different binding affinity. The azide-reactive liposome provides a facile strategy for fabrication of either a natural or a synthetic glycolipid-based membrane-mimetic glycoarray. This liposomal glyco-microarray is simple and broadly applicable and thus will find important biomedical applications, such as studying glycolipid-protein interactions and toxin screening applications.     

Young's moduli of surface-bound liposomes by atomic force microscopy force measurements

Mechanical properties of layers of intact liposomes attached by specific interactions on solid surfaces were studied by atomic force microscopy (AFM) force measurements. Force-distance measurements using colloidal probe tips were obtained over liposome layers and used to calculate Young's moduli by using the Hertz contact theory. A classical Hertz model and a modified Hertz one have been used to extract Young's moduli from AFM force curves. The modified model, proposed by Dimitriadis, is correcting for the finite sample thickness since Hertz's classical model is assuming that the sample is infinitely thick. Values for Young's moduli of 40 and 8 kPa have been obtained using the Hertz model for one and three layers of intact liposomes, respectively. Young's moduli of approximately 3 kPa have been obtained using the corrected Hertz model for both one and three layers of surface-bound liposomes. Compression work performed by the colloidal probe to compress these liposome layers has also been calculated.     

Block liposomes from curvature-stabilizing lipids: connected nanotubes, -rods, or -spheres

We report on the discovery of block liposomes, a new class of chain-melted (liquid) vesicles, with membranes comprised of mixtures of the membrane-curvature-stabilizing multivalent lipid MVLBG2 of colossal charge +16 e and neutral 1,2-dioleoyl-sn-glycero-3-phosphatidylcholine (DOPC). In a narrow MVLBG2 composition range (8-10 mol%), cryo-TEM revealed block liposomes consisting of distinctly shaped, yet connected, nanoscale spheres, pears, tubes, or rods. Unlike typical liposome systems, where spherical vesicles, tubular vesicles, and cylindrical micelles are separated on the macroscopic scale, within a block liposome, shapes are separated on the nanometer scale. Diblock (pear-tube) and triblock (pear-tube-pear) liposomes contain nanotubes with inner lumen diameter of 10-50 nm. Diblock (sphere-rod) liposomes were found to contain micellar nanorods approximately 4 nm in diameter and several micrometers in length, analogous to cytoskeletal filaments of eukaryotic cells. Block liposomes may find a range of applications in chemical and nucleic acid delivery and as building blocks in the design of templates for hierarchical structures.