Towards Reversibility of Ion Transfer Across the Interface between Valinomycin Membranes and Aqueous Electrolyte Solutions

Valinomycin-based potassium-selective membranes doped with potassium tetrakis(4-chlorophenyl)borate (KClTPB) or sodium tetrakis(4-fluorophenyl)borate (NaFTPB) are studied in KCl, NaCl, and CaCl₂ solutions by potentiometric and electrochemical impedance methods. Before contact with KCl, membranes doped with NaFTPB provide Nernstian potentiometric response to Na⁺ ions, which is lost after conditioning the membranes in KCl. The membranes doped with KClTPB even before contact with KCl give no Nernstian response to Na⁺ ions. In CaCl₂ solutions, none of the membranes provide a regular potentiometric response. Despite the difference in potentiometric behavior, the impedance spectra of the membranes are very similar in all solutions regardless of prior conditioning of the membranes. No evidence for a hindrance towards charge transfer processes is observed. The results suggest that the membrane/solution interface is reversible for interfering ions as well as for potassium, and the contamination of solutions with the latter is the sole reason for the lack of Nernstian response in the interfering electrolytes.     

Self‐Assembly Film of Zeolite Y Nanocrystals Loading Palladium on an Au Electrode for Electrochemical Applications

Nano‐scale zeolite Y crystals were synthesized, and palladium nanoparticles were prepared in the supercage of the zeolite by “ship‐in‐a‐bottle” approach. A novel method to fabricate zeolite‐modified electrode (ZME) loading Pd nanoparticles was developed, in which the zeolite Y loading Pd²⁺ ions was self‐assembled on (3‐mercaptopropyl) trimethoxysilane‐attached Au surface to form the stable and density packed multilayers (SAM‐ZME). The structures of zeolite Y and the SAM‐ZME were investigated by using TEM, XRD and SEM techniques. Pd²⁺ ions in the SAM‐ZME were converted into Pd nanoparticles (Pd_n⁰) by two steps consisting of the electrochemical reduction as well as the succeeding admission and release of CO. The redox couple [Fe(CN)₆]^3?/4? was used to probe the electron‐transfer barrier properties during self‐assembling process. Moreover, the special properties of the SAM‐ZME loading Pd_n⁰ were studied by using cyclic voltammetry and CO‐probe in situ FTIR spectroscopy. The results illustrated that Pd_n⁰ in the SAM‐ZME exhibits higher electrocatalytic activity for oxidation of adsorbed CO than that of ZME prepared in our previous study by zeolite coating method. The present study is of importance in design and preparation of SAM‐ZME, which poccesseses excellent properties for the immobilization of electrocatalysts or biomolecules.     

Silver(I)‐Selective PVC Membrane Potentiometric Sensor Based on a Recently Synthesized Calix[4]arene

A new PVC membrane potentiometric sensor for Ag(I) ion based on a recently synthesized calix[4]arene compound of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dihydroxy‐calix[4]arene‐thiacrown‐4 is developed. The electrode exhibits a Nernstian response for Ag(I) ions over a wide concentration range (1.0×10^?2?1.0×10^?6 M) with a slope of 53.8±1.6 mV per decade. It has a relatively fast response time (5–10 s) and can be used for at least 2 months without any considerable divergence in potentials. The proposed electrode shows high selectivity towards Ag⁺ ions over Pb²⁺, Cd²⁺, Co²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Mg²⁺, Ca²⁺, Li⁺, K⁺, Na⁺, NH₄⁺ ions and can be used in a pH range of 2–6. Only interference of Hg²⁺ is found. It is successfully used as an indicator electrode in potentiometric titration of a mixture of chloride, bromide and iodide ions.     

Lead(II) Potentiometric Sensor Based on 1,4,8,11‐Tetrathiacyclotetradecane Neutral Carrier and Lipophilic Additives

A potentiometric sensor for lead(II) ions based on the use of 1,4,8,11‐tetrathiacyclotetradecane (TTCTD) as a neutral ionophore and potassium tetrakis‐(p‐chlorophenyl)borate as a lipophilic additive in plasticized PVC membranes is developed. The sensor exhibits linear potentiometric response towards lead(II) ions over the concentration range of 1.0×10^?5–1.0×10^?2 mol L^?1 with a Nernstian slope of 29.9 mV decade^?1 and a lower limit of detection of 2.2×10^?6 mol L^?1 Pb(II) ions over the pH range of 3–6.5. Sensor membrane without a lipophilic additive displays poor response. The sensor shows high selectivity for Pb(II) over a wide variety of alkali, alkaline earth and transition metal ions. The sensor shows long life span, high reproducibility, fast response and long term stability. Validation of the method by measuring the lower limit of detection, lower limit of linear range, accuracy, precision and sensitivity reveals good performance characteristics of the proposed sensor. The developed sensor is successfully applied to direct determination of lead(II) in real samples. The sensor is also used as an indicator electrode for the potentiometric titration of Pb(II) with EDTA and potassium chromate. The results obtained agree fairly well with data obtained by AAS.     

Ethylenediamine effect on Co2+ uptake by zeolite Y

Co²⁺ ion exchange, at room temperature, from aqueous cobalt — sodium chloride solutions with NaY zeolite has been studied. The effect of contact time on the shape of the sorption curves of Co²⁺ using zeolite Y dehydrated at 600°C is similar to the one found in our previous work with a zeolite dehydrated at 150 °C. A fast sorption uptake is observed in which 1.8 meq of Na⁺ ions/g of zeolite are replaced by cobalt ions followed by a desorption process where the uptake decreases to 1.2 meq/g zeolite. The Co²⁺ sorption using zeolite Y dehydrated at 600 °C is increased when ethylenediamine solution is passed through the zeolite. The Co²⁺ sorption uptake, initially 2.0 meq/g, incrases to 2.8 meq/g of zeolite. This behavior is explained by the location and coordination of cobalt in zeolite Y sites. It is suggested that the highest uptake process is due to the blocking of zeolite sites by a Co complex compound.     

Photochemical studies with a zeolite Y membrane formed via secondary growth

Zeolite membranes offer an attractive feature in design of artificial photosynthetic assemblies because they can keep the charge separated species apart, yet allow for communication between the two sides via the intervening zeolite channels and cages. However, such a strategy would require that the zeolite membrane be pinhole-free. In an earlier paper (J. Phys. Chem. B 106, 11898 (2002)), we have shown that nanocrystalline zeolite Y can be spin-coated on porous substrates to form membranes, and the pinholes can be plugged by a photoresist. Such membranes do not allow manipulation at higher temperatures or even in solution chemistry because of the thermal instability and solubility characteristics of the photoresist. In this paper, we report on a zeolite Y membrane made by the secondary growth method. The growth process leads to minimal pinholes as determined by leak tests. The sturdiness of the membranes allows for manipulation and we have shown that organic reactions can be carried out in the zeolite pores. Charge transport through the membrane by an electron hopping process mediated via self-exchange of ion-exchanged bipyridinium ions are demonstrated. The electron transfer was initiated using a photochemical Ru(bpy)²⁺₃-EDTA system.     

A Bis‐Oxime Derivative of Diaza‐18‐Crown‐6 as an Ionophore for Silver Ion

A new pendant‐arm derivative of diaza‐18‐crown‐6, containing two oxime donor groups, has been synthesized and incorporated into a polyvinyl chloride (PVC) membrane ion‐selective electrode. The electrode shows selectivity for Ag⁺ ion, with a near Nernstian response. Pb²⁺, Cu²⁺, Hg²⁺, and Tl⁺ are major interfering ions, with Cd²⁺ having minor interference. The electrode shows no potentiometric response for the ions Mg²⁺, Al³⁺, K⁺, Ca²⁺, Ni²⁺, Fe³⁺, and La³⁺, and is responsive to H⁺ at pH<6.     

Multimodal Use of New Coumarin‐Based Fluorescent Chemosensors: Towards Highly Selective Optical Sensors for Hg2+ Probing

Despite several types of fluorescent sensing molecules have been proposed and examined to signal Hg²⁺ ion binding, the development of fluorescence‐based devices for in‐field Hg²⁺ detection and screening in environmental and industrial samples is still a challenging task. Herein, we report the synthesis and characterization of three new coumarin‐based fluorescent chemosensors featuring mixed thia/aza macrocyclic framework as receptors units, that is, ligands L1 – L3 . These probes revealed an OFF–ON selective response to the presence of Hg²⁺ ions in MeCN/H₂O 4:1 (v/v), which allowed imaging of this metal ion in Cos‐7 cells in vitro. Once included in silica core–polyethylene glycol (PEG) shell nanoparticles or supported on polyvinyl chloride (PVC)‐based polymeric membranes, ligands L1 – L3 can also selectively sense Hg²⁺ ions in pure water. In particular we have developed an optical sensing array tacking advantage of the fluorescent properties of ligand L3 and based on the computer screen photo assisted technique (CSPT). In the device ligand L3 is dispersed into PVC membranes and it quantitatively responds to Hg²⁺ ions in natural water samples.     

Pervaporation performance of PDMS-NiY zeolite hybrid membranes in the desulfurization of gasoline

PDMS-Ni²⁺Y zeolite hybrid membranes were fabricated and used for the pervaporation removal of thiophene from model gasoline system. The structural morphology, mechanical stability, crystallinity, and free volume characteristics of the hybrid membranes were systematically investigated. Molecular dynamics simulation was employed to calculate the diffusion coefficients of small penetrants in the polymer matrix and the zeolite. The effect of Ni²⁺Y zeolite content on pervaporation performance was evaluated experimentally. With the increase of Ni²⁺Y zeolite content, the permeation flux increased continuously, while the enrichment factor first increased and then decreased possibly due to the occurrence of defective voids within organic–inorganic interface region. The PDMS membrane containing 5.0 wt% Ni²⁺Y zeolite exhibited the highest enrichment factor (4.84) with a permeation flux of 3.26 kg/(m² h) for 500 ppm sulfur in feed at 30 °C. The effects of operating conditions on the pervaporation performance were investigated in detail. It has been found that the interfacial morphology strongly influenced the separation performance of the hybrid membrane, and it was of great significance to rationally modify the interfacial region in order to improve the organic–inorganic compatibility.     

Highly Selective Nd(III) Sensors: Novel Macrocyclic Compounds for Potentiometric Determination of Neodymium

Conductometric studies on the complexation properties of two newly synthesized lariat ethers viz 1,5‐di(cyanoethane)‐2,4 : 7,8 : 13,14‐tribenzo‐1,5‐diaza‐9,12‐dioxacyclopentadeca‐2,7,13‐triene (L₁) and 1,5‐di(cyanoethane)‐2,3,4‐pyridine‐7,8 : 13,14‐dibenzo‐1,3,5‐triaza‐9,12‐dioxa cyclopentadeca‐2,7,13‐triene (L₂) towards various metal ions in acetonitrile solutions revealed the formation of 1 : 1 ligand metal complexation. These compounds were explored as neutral ionophores for the fabrication of Nd³⁺ selective and sensitive membrane coated graphite electrodes (CGEs). Among all the electrodes prepared, CGEs with membrane composition L₁(5%) : NaTPB(3%) : NPOE (57%) : PVC (35%) and L₂(5%) : NaTPB(3%) : NPOE (53%) : PVC (39%) showed best performance. Both the electrodes showed Nernstian response towards Nd³⁺ ions over a wide concentration range with detection limits 3.8×10^?8 mol L^?1 and 1.6×10^?8 mol L^?1 respectively. These electrodes showed a fast response time of <15 s and could be used over a period of three months without significant divergence in their characteristics. The proposed electrodes revealed very good selectivity for Nd³⁺ ions over several ions. However, higher concentration of Co²⁺, La³⁺, Pr³⁺ and Yb³⁺ caused some interference. The potentiometric response of these electrodes was excellent in the range of pH 3.5 to 7.6 and they could tolerate up to 20% (v/v) nonaqueous media in the test solutions. These electrodes were used successfully as indicator electrode in the potentiometric titration of Nd³⁺ against EDTA and also in the quantitative determination of Nd³⁺ ions from binary mixtures and water samples.     

Highly active and reusable heterogeneous catalysts for acylation of anisole

In the present study, non-conventional solid acid catalysts such as NaY, metal ion exchanged zeolite NaY (Zn²⁺, Fe³⁺, Ce³⁺, La³⁺ and Nd³⁺), H-mordenite, H-β and HZSM-5 were used in order to overcome the disadvantages of conventional Friedel-Crafts catalysts for the acylation of anisole with acetic anhydride. Among the various zeolites studied, the HY zeolite shows an intermediate activity. Zeolite containing transition metal ions (Zn²⁺ and Fe³⁺) are less active and zeolite NaY is nearly inactive. The catalysts exhibit the activity in the order H-β>transition metal ions (Zn²⁺ and Fe³⁺)>HY>NaY zeolite. The highest catalytic activity of H-β could be due to its larger pore size. The type of acidity and the acid strength in zeolite Y were determined by FTIR and differential scanning calorimetric (DSC) studies on the pyridine adsorbed catalysts. The correlation of catalytic activity with acidity reveals that Brönsted acid sites in zeolite promote the acylation of anisole.     

Photophysical Properties of Metal Ion Functionalized NaY Zeolite

A series of luminescent ion exchanged zeolite are synthesized by introducing various ions into NaY zeolite. Monometal ion (Eu³⁺, Tb³⁺, Ce³⁺, Y³⁺, Zn²⁺, Cd²⁺, Cu²⁺) exchanged zeolite, rare‐earth ion (Eu³⁺, Tb³⁺, Ce³⁺) exchanged zeolite modified with Y³⁺ and rare‐earth ion (Eu³⁺, Tb³⁺, Ce³⁺) exchanged zeolite modified with Zn²⁺ are discussed here. The resulting materials are characterized by Fourier transform infrared spectrum radiometer (FTIR), XRD, scanning electronic microscope (SEM), PLE, PL and luminescence lifetime measurements. The photoluminescence spectrum of NaY indicates that emission band of host matrix exhibits a blueshift of about 70 nm after monometal ion exchange process. The results show that transition metal ion exchanged zeolites possess a similar emission band due to dominant host luminescence. A variety of luminescence phenomenon of rare‐earth ion broadens the application of zeolite as a luminescent host. The Eu³⁺ ion exchanged zeolite shows white light luminescence with a great application value and Ce³⁺ exchanged zeolite steadily exhibits its characteristic luminescence in ultraviolet region no matter in monometal ion exchanged zeolite or bimetal ions exchanged zeolite.     

Enhanced Performance of CNT‐doped Imine Based Receptors as Fe(III) Sensor Using Potentiometry and Voltammetry

A highly sensitive and selective potentiometric and voltammteric assay for the detection of Fe³⁺ using (E)‐3‐((2‐(2‐(2‐aminoethylamino) ethylamino) ethylimino)methyl)‐4H‐chromen‐4‐one (IFE(III)) ionophore was developed. To demonstrate the ion‐to‐electron transfer ability of MWCNT, these were incorporated in the ion‐selective membrane and response characteristics of Fe³⁺ electrode was compared with those of the traditional ion selective electrode. The electrode showed an improved Nernstian slope, lower detection limit, response time of less than 5 s and working in a pH range of 3.0 to 8.0. Differential pulse voltammetric studies were performed for IFE(III)‐Fe³⁺ complex in DMSO solvent medium at glassy carbon (GC) electrode. A linear relationship between the cathodic peak current and concentration of Fe³⁺ was observed in the range of 1.6×10^?5 to 4.4×10^?5 mol/L with a detection limit of 5.2×10^?8 mol/L. The electrode shows remarkable selectivity for Fe³⁺ ions over alkali, alkaline earth, transition and heavy metal ions. The optimized electrode was successfully applied for the determination of Fe³⁺ ion in different real‐life samples using potentiometric technique. Theoretical calculations were used to support the complexation behavior of Fe³⁺ with IFE(III).     

A Novel Al(III)‐Selective Electrochemical Sensor Based on N,N′‐Bis(salicylidene)‐1,2‐phenylenediamine Complexes

A polyvinylchloride membrane sensor based on N,N′‐bis(salecylidene)‐1,2‐phenylenediamine (salophen) as membrane carrier was prepared and investigated as a Al³⁺‐selective electrode. The sensor exhibits a Nernstian response toward Al(III) over a wide concentration range (8.0×10^?7–3.0×10^?2 M), with a detection limit of 6.0×10^?7 M. The potentiometric response of the sensor is independent of the pH of the test solution in the pH range 3.2–4.5. The electrode possesses advantages of very fast response and high selectivity for Al³⁺ in comparison with alkali, alkaline earth and some heavy metal ions. The sensor was used as an indicator electrode, in the potentiometric titration of aluminum ion and in determination of Al³⁺ contents in drug, water and waste water samples.     

Application of 2‐(benzyliminomethyl)‐6‐methoxy‐4‐(4‐methoxyphenyl‐azo)phenol in construction of ion‐selective PVC membrane electrode for determination of copper (II) in mineral water sample

The potentiometric characteristics of a new Cu²⁺‐selective electrode based on 2‐(benzyliminomethyl)‐6‐methoxy‐4‐(4‐methoxyphenyl‐azo) phenol as an efficient ionophore has been evaluated. The effects of influential parameters on the potentiometric responses such as the amount of plasticizer, the amount of ionophore, pH of the sample solution, and the effect of coexisting ions on the electrode signal were subsequently investigated . The selectivity of the electrode was assessed by calculating the selectivity coefficients using the matched potential method. The optimum ratio of the amount of materials required for the preparation of the electrode was found to be 1.7: 32.1: 64.2: 2.0 corresponding to carboxylated PVC, dimethyl sebacate as solvent mediators, potassium tetrakis (p‐chlorophenyl) borate as the anion localizing agent, and ionophore, respectively. The electrode had a fast response (7s) as well as a satisfactory Nernstian slope (29.26±0.91 mV/decade) to Cu²⁺ over a wide concentration range of 2.0×10^?6‐ 5.0×10^?2 M with a low detection limit of 5.9×10^?7 M. The developed sensor was successfully used for the potentiometric titration of Cu²⁺ ion with EDTA and subsequently, efficient determination of this metal ion in a mineral water sample was performed.     

Mesopores in USY Zeolites II

Microporous zeolites Na‐Y and K‐Y were converted into the NaNH₄‐Y and KNH₄‐Y modifications by ion exchange being active in dealumination. Removal of framework aluminium and silicon is accompanied by formation of secondary mesopores. Internal mesopores are formed in the centre of zeolite crystals and external pores at their surface. Formation of mesopores changes the sorption behaviour.Residual alkali metal cations as Na⁺ or K⁺ stabilise, however, the framework ≡Si‐O‐Al≡ bonds. Because of inhomogeneous distribution of sodium ions, in NaNH₄‐Y less internal but more external mesopores are formed. Potassium ions of KNH₄‐Y are more homogeneous distributed over the framework why a more balanced formation of secondary pores takes place.     

Eco-friendly synthesis of high silica zeolite Y with choline as green and innocent structure-directing agent

Zeolite synthesis in contemporary chemical industries is predominantly conducted using organic structure-directing agents (OSDAs), which are chronically hazardous to humans and the environment. It is a growing trend to develop an eco-friendly and nuisanceless OSDA for zeolite synthesis. Herein, choline is employed as a non-toxic and green OSDA to synthesize high silica Y zeolite with SiO₂/Al₂O₃ ratios of 6.5–6.8. The prepared Y zeolite samples exhibited outstanding (hydro)thermal stability at ultrahigh temperature owing to the higher SiO₂/Al₂O₃ ratio. The XRF, SEM, ²⁹Si-NMR and ¹³Na+ results suggested that choline plays a structure-directing role in the synthesis of Y zeolite, while the feed molar fraction of Na⁺ is a crucial determinant for the framework SiO₂/Al₂O₃ ratio and the crystal morphology.     

Reactivity of Extra‐framework Species of USY Zeolites in Alkaline Medium

Zeolites of type USY (ultra‐stable Y) were obtained by steaming of NH₄NaY modification. Samples were modified by subsequent alkaline treatment in KOH solution. USY and USY‐KOH were characterised by chemical element analysis, XRD, IR, ²⁹Al and ²⁹Si MAS NMR spectroscopic measurements. Correct silicon to aluminium ratios (Si/Al) were determined by XRD and IR (double ring vibration w_DR) data whereas values calculated according to data of ²⁹Si MAS NMR and IR spectroscopy (asymmetrical TOT valence vibration w_TOT) appeared to be too high., In the latter case, the signals of the zeolite framework were strongly superimposed by that of extra‐framework silica gel (EFSi) formed during steaming. It was found that alkaline leaching induces desilication of silicon‐rich area of the zeolite framework and partial dissolution of EFSi. Silicate ions of both react with likewise dissolved extra‐framework aluminium (EFAl) to form X‐ray amorphous aluminosilicate. Consequently, the superposition of the ²⁹Si MAS NMR signals of the zeolite framework by silica gel was reduced for Q⁴(0Al) but increased for Q⁴ (2Al) and Q⁴(3Al) structure units. A reinsertion of EFAl into the zeolite framework has not been observed.     

QSPR Modeling of Potentiometric Mg2+/Ca2+ Selectivity for PVC‐plasticized Sensor Membranes

The development of novel ionophores for ion‐selective sensors is a time‐consuming and tedious process requiring synthesis of candidate substances, preparation of plasticized polymeric membranes, and their thorough characterization with traditional protocols to assess sensitivity, selectivity and detection limits for target ions. The vast amount of literature data accumulated on various ion‐selective sensors allows for significant facilitation of the development through in silico experiments. In this report, we performed the feasibility study on the prediction of potentiometric Mg²⁺/Ca²⁺ selectivity for various amide ligands using quantitative structure‐property relationship (QSPR) modeling. The approach proved to be promising for ionophore screening purposes with achieved precision in prediction of the selectivity coefficient logK(Mg²⁺/Ca²⁺) of 0.5 in the range from ?1.7 to +2.3. The study also shows a route for prediction of new potential ionophores with high selectivity values.     

Solid‐Contact Potentiometric Sensor Based on Polyaniline and Unsubstituted Pillar[5]Arene

A novel potentiometric sensor based on screen‐printed carbon electrode covered with electropolymerized polyaniline (PANI) and unsubstituted pillar[5]arene as ionophore has been developed and tested in potentiometric measurements of pH and metal ions. The introduction of pillar[5]arene improved the reversibility of the pH response in the range from 2.0 to 9.0 with the slope of 45 mV/pH. Among metal cations, the response to Fe³⁺ and Ag⁺ ions was referred to PANI redox conversion whereas the signal toward Cu²⁺ in the range from 1.0×10^?6 to 1.0×10^?2 M (limit of detection (LOD) 3.0×10^?7 M) to specific interaction with the macrocycle.