Amperometric Determination of Ascorbic Acid at an Electrodeposited Redox Polymer Film Modified Gold Electrode

A sensitive and selective electrochemical method for the determination of ascorbic acid was developed. It was shown that a hydrated osmium complex‐containing redox polymer film can be electrodeposited at the gold electrode and it exhibits excellent electrocatalytic activity towards the oxidation of ascorbic acid. In contrast to a bare gold electrode, the oxidation current of ascorbic acid increased greatly and the oxidation peak potential shifted negatively to about 0.01 V (vs. SCE) at the modified electrode. Amperometric measurements were performed at an applied potential of 0.01 V and a linear response was obtained in the range of 2–400 μM with a limit of detection (LOD) of 0.6 μM (S/N=3). The interference studies showed that the modified electrode exhibits excellent selectivity in the presence of large excess of uric acid and dopamine. The proposed procedure was successfully applied to the determination of ascorbic acid in human urine samples.     

Preparation and Characterization of Mixed‐Valent Osmium Hexacyanoferrate/Silicomolybdate Hybrid Films and Their Electrocatalytic Properties

A polynuclear mixed‐valent osmium hexacyanoferrate/silicomolybdate film electrode has been prepared using repetitive cyclic voltammetry. The cyclic voltammograms have been recorded for the deposition of a mixed‐valent osmium hexacyanoferrate/silicomolybdate hybrid film directly from the mixture of Os³⁺, Fe(CN₆)^3?, and SiMo₁₂O₄₀^4? ions from the acidic aqueous solutions. The polynuclear mixed‐valent osmium hexacyanoferrate/silicomolybdate film exhibited four redox couples. The electrocatalytic properties of the osmium hexacyanoferrate/silicomolybdate film electrode have been studied. The modified electrode has shown good electrocatalytic properties towards the oxidation of dopamine, ascorbic acid, epinephrine, norepinephrine, and reduction of IO₃^?, Fe³⁺.     

Design of an Os Complex‐Modified Hydrogel with Optimized Redox Potential for Biosensors and Biofuel Cells

Multistep synthesis and electrochemical characterization of an Os complex‐modified redox hydrogel exhibiting a redox potential ≈+30 mV (vs. Ag/AgCl 3 m KCl) is demonstrated. The careful selection of bipyridine‐based ligands bearing N,N‐dimethylamino moieties and an amino‐linker for the covalent attachment to the polymer backbone ensures the formation of a stable redox polymer with an envisaged redox potential close to 0 V. Most importantly, the formation of an octahedral N6‐coordination sphere around the Os central atoms provides improved stability concomitantly with the low formal potential, a low reorganization energy during the Os^3+/2+ redox conversion and a negligible impact on oxygen reduction. By wiring a variety of enzymes such as pyrroloquinoline quinone (PQQ)‐dependent glucose dehydrogenase, flavin adenine dinucleotide (FAD)‐dependent glucose dehydrogenase and the FAD‐dependent dehydrogenase domain of cellobiose dehydrogenase, low‐potential glucose biosensors could be obtained with negligible co‐oxidation of common interfering compounds such as uric acid or ascorbic acid. In combination with a bilirubin oxidase‐based biocathode, enzymatic biofuel cells with open‐circuit voltages of up to 0.54 V were obtained.     

Synthesis,Characterization and Electrochemical Polymerization of a Ru2+ Functionalized Pyrrole Monomer

A ruthenium(II) functionalized pyrrole, Ruthenium‐bis‐N,N′‐(2,2′‐bipyridyl)‐N‐(pyridine‐4‐ylmethyl‐(8‐pyrrole‐1‐yl‐octyl)amine)chloride, 1 , has been synthesized and characterized by spectroscopic (UV/vis, ¹H NMR) techniques and cyclic voltammetry. In solution 1 gave a redox couple associated with the Ru^3+/2+ redox system and an irreversible wave associated with the oxidation of the covalently linked pyrrole moiety. What is believed to be homopolymerization, redox active surface films of 1 have been prepared by electrooxidation of the monomeric solution. The resulting polymeric film exhibited clear redox activity associated with the incorporated Ru²⁺ redox centre, which is covalently linked ruthenium centre to the pyrrole moiety in 1. The effect of surface coverage upon the electrochemical behavior of the deposited films has been undertaken. Preliminary investigations into the homogeneous charge transport dynamics of the polymeric film deposited onto platinum microelectrodes has been undertaken. Copolymerization with 3‐methylthiophene was carried out and a clear ruthenium response was seen. Films were formed by both cyclic voltammetry and chronocoulometry and studied. Various ratios were attempted but the ideal was found to be 52 : 5 mmol (3‐methylthiophene: 1 ).     

A Nernstian Biosupercapacitor

We propose the very first “Nernstian biosupercapacitor”, a biodevice based on only one redox polymer: poly(vinyl imidazole‐co‐allylamine)[Os(bpy)₂Cl], and two biocatalysts. At the bioanode PQQ‐dependent glucose dehydrogenase reduces the Os³⁺ moieties at the polymer to Os²⁺ shifting the Nernst potential of the Os³⁺/Os²⁺ redox couple to negative values. Concomitantly, at the biocathode the reduction of O₂ by means of bilirubin oxidase embedded in the same redox polymer leads to the oxidation of Os²⁺ to Os³⁺ shifting the Nernst potential to higher values. Despite the use of just one redox polymer an open circuit voltage of more than 0.45 V was obtained during charging and the charge is stored in the redox polymer at both the bioanode and the biocathode. By connecting both electrodes via a predefined resistor a high power density is obtained for a short time exceeding the steady state power of a corresponding biofuel cell by a factor of 8.     

Poly(pyrrole‐co‐pyrrole‐2‐carboxylic acid)/Pyruvate Oxidase Based Biosensor for Phosphate: Determination of the Potential,and Application in Streams

A biosensor based on conductive poly(pyrrole‐co‐pyrrole‐2‐carboxylic acid) [Poly(Py‐co‐PyCOOH)] copolymer film coated gold electrode was developed for the quantitative phosphate determination. Enzyme pyruvate oxidase was immobilized chemically via the functional carboxylated groups of the copolymer. The potential to be applied which is deficiency of phosphate biosensor studies for precise phosphate detection was clarified by using differential pulse voltammetry technique. Performance of the sensing ability of the biosensor was improved by optimizing cofactor/cosubstrate concentrations, polymeric film density and pH. The biosensor showed a linearity up to phosphate concentration of 5 mM, operational stability with a relative standard deviation (RSD) of 0.07 % (n=7) and accuracy of 101 % at ?0.15 V (vs. Ag/AgCl). Detection limit (LOD) and sensitivity were calculated to be 13.3 μM and 5.4 μA mM^?1 cm^?2, respectively by preserving 50 % of its initial response at the end of 30 days. It's performance was tested to determine phosphate concentrations in two streams of Zonguldak City in Turkey. Accuracy of phosphate measurement in stream water was found to be 91 %.     

Electrochemical Preparation,Characterization, and Electrocatalytic Properties of OsPtCl6 Film Electrodes Towards Reduction of NAD+, Chloroacetic Acids,and Nitrous Oxide

Stable electroactive mixed films of osmium oxide/hexachloroplatinate, osmium oxide and platinum have been deposited on different electrode materials by cycling the electrode potential repetitively in solution containing Os³⁺ and PtCl . The film growth of was monitored by using cyclic voltammetry and electrochemical quartz crystal microbalance (EQCM). The cyclic voltammetric features of modified electrode in Os³⁺ solution resembles that of surface wave, and involves ions‐exchange with Os³⁺ ions present in the solution. Based on the SEM results the modifier was considered as one‐dimensional, mixed‐valent polymeric film, and stabilized by Os^3+/2+ counter ions. Finally, the electrocatalytic activity of the modified electrode was examined toward reduction of NAD⁺, chloroacetic acids and nitrous oxide.     

Pyrolyzed Photoresist Carbon Electrodes for Microchip Electrophoresis with Dual‐Electrode Amperometric Detection

The fabrication and evaluation of pyrolyzed photoresist films (PPF) for microchip capillary electrophoresis (CE) with dual‐electrode electrochemical (EC) detection is described. The sensitivity, linearity, and reproducibility were evaluated using catecholamines and related compounds, including dopamine (DA), 5‐hydroxyindole‐3‐acetic acid (5‐HIAA), ascorbic acid (AA), and catechol. Initial studies with DA show the response of the PPF electrodes to be linear between 25 and 500 μM (r²=0.999) with a limit of detection (LOD) of 5 μM (S/N=3) and sensitivity of 5.8 pA/μM. Selectivity was further enhanced by employing dual‐electrode detection in the series configuration for detection of species exhibiting chemically reversible redox reactions.     

Electrochemically Degraded Dopamine Film for the Determination of Dopamine

A dopamine (DA) polymer was deposited electrochemically on to a glassy carbon (GC) surface until the electrode surface was passivated. The DA film on the GC surface was re‐formed for high sensitivity and reproducibility by electrochemical degradation. The re‐formed electrode was sensitive and selective in the determination of DA in the presence of ascorbic acid. The linear range obtained by square‐wave voltammetry was between 0.1 and 2.1 μM (R=0.996, n=6) with a sensitivity of 1.2 μA μM^?1 and a detection limit (S/N=3) of 0.04 μM. The electropolymerized DA film was stable and the re‐formed electrode was reproducible for DA determination.     

Electrooxidation and Amperometric Detection of Ascorbic Acid at GC Electrode Modified by Electropolymerization of N,N‐Dimethylaniline

The polymer film of N,N‐dimethylaniline (DMA) is deposited on the electrochemically pretreated glassy carbon (GC) electrode by continuous electrooxidation of the monomer. This poly N,N‐dimethylaniline (PDMA) film‐coated electrode can be used as an amperometric sensor of ascorbic acid (AA). The polymer film (thickness (?): 0.3±0.02 μm) having positive charge in its backbone attracts the anionic species AA. Thus, the anodic peak potential (350 mV vs. Ag|AgCl|NaCl_(sat)) for the oxidation of AA at the bare electrode is largely shifted to the negative value (150 mV) at this electrode. The PDMA film‐coated electrode is stable in acidic, alkaline and neutral media and can sense AA at different pH's. The diffusion coefficients of AA in solution (D) and in film (D_s) were estimated by rotating disk electrode voltammetry: D=(5.5±0.1)×10^?6 cm² s^?1 and D_s=(6.3±0.2)×10^?8, (6.0±0.2)×10^?8 and (4.7±0.2)×10^?8 cm² s^?1 for 0.5, 1.5 and 3.0 mM AA, respectively. A permeability of AA through the PDMA film was found to decrease with increasing the concentration of AA in the solution. In the chronoamperometry, the current response for the oxidation of AA at different times elapsed after potential‐step application is linearly increased with the increase in AA concentration in a wide range of its concentration from 25 μM to 1.65 mM. In the hydrodynamic amperometry, a successive addition of 10 μM AA caused the successive increase in current response with equal amplitude and the sensitivity was calculated as 0.178 μA cm^?2 μM^?1. So, the fouling of the electrode surface caused by the oxidized product of AA is markedly eliminated at this PDMA film‐coated electrode. A flow injection analysis based on the present electrode was performed to estimate the concentration of vitamin C in fruit juice.     

A Carbon Nanotube Layered Electrode for the Construction of the Wired Bilirubin Oxidase Oxygen Cathode

Oxidatively treated carbon nanotubes were coated on a glassy carbon surface to form a CNT‐layer. On the CNT‐layered GC surface, a redox hydrogel film of the copolymer, of polyacryamide and poly(N‐vinylimidazole) complexed with [Os(4,4′‐dichloro‐2,2′‐bipyridine)₂Cl]^+/2+ wiring bilirubin oxidase was immobilized. A good contact was achieved between the hydrogel film and the hydrophilic CNT‐layer with carboxylated CNTs. The prepared bilirubin oxidase cathode on the CNT‐layer was employed for the electrocatalytic reduction of O₂, and enhanced current and stability were observed. Electron transfers from the electrode surface O₂ molecules were analyzed. The optimal composition of the enzyme, redox polymer, and cross‐linker in the catalyst and the thickness of the CNT‐layer were determined.     

Development of a Creatinine Sensor Based on a Molecularly Imprinted Polymer‐Modified Sol‐Gel Film on Graphite Electrode

An electrochemical creatinine sensor based on a molecularly imprinted polymer (MIP)‐modified sol‐gel film on graphite electrode was developed. The surface coating of MIP over sol‐gel was advantageous to obtain a porous film with outwardly exposed MIP cavities for unhindered selective rebinding of creatinine from aqueous and biological samples. A fast differential pulse, cathodic stripping voltammetric response of creatinine can be obtained after being preanodized the sensor in neutral medium containing appropriate amount of creatinine at +1.8 V versus SCE for 120 s. A linear response over creatinine concentration in the range of 1.23 to 100 μg mL^?1 was exhibited with a detection limit of 0.37 μg mL^?1 (S/N=3).     

Selective Detection of Dopamine and Its Metabolite,DOPAC, in the Presence of Ascorbic Acid Using Diamond Electrode Modified by the Polymer Film

The surface of boron‐doped diamond (BDD) electrode is modified by the polymer film for the first time. The cationic polymer film of N,N‐dimethylaniline (DMA) is electrochemically deposited on BDD electrode surface. This polymer (PDMA) film‐coated BDD electrode is used as a sensor which selectively detect dopamine (DA) in the presence of ascorbic acid (AA). This electrode also can detect both DA and its metabolite, 3,4‐dihydroxy phenyl acetic acid (DOPAC) in the presence of AA in the range of the physiological concentrations of these species. Favorable ionic interaction (i.e., electrostatic attraction) between the PDMA film and AA or DOPAC lowers their oxidation potentials and enhances the current response for AA and DOPAC compared to that at the bare electrode. The PDMA film also shows a hydrophobic interaction with DA and DOPAC. In cyclic voltammetric measurements, the PDMA film‐coated electrode can successfully separate the oxidation potentials for AA and DA coexisting in the same solution and the separation is about 200 mV. AA oxidizes at more negative potential than DA. In square‐wave voltammetry, the sensitivity of the PDMA film‐coated BDD electrode for DA in the presence of higher concentration of AA is higher than that of the PDMA film‐coated glassy carbon electrode. The hydrodynamic amperometric experiments confirm that the oxidation of AA is not affected by the oxidized product of DA and vice versa. So, unlike the bare electrode the catalytic oxidation of AA by the oxidized DA is eliminated at the PDMA film‐coated BDD electrode. The sensitivities of the modified electrode for AA, DA and DOPAC, which are present in the same solution with their physiological concentration ratios, are calculated to be 0.070, 0.363 and 0.084 μA μM^?1, respectively. The modified electrode exhibits a stable and sensitive response to DA.     

A new near‐infrared switchable electrochromic polymer and its device application

A new near‐infrared switchable electrochromic polymer containing carbazole pendant (poly‐SNSC), synthesized by electrochemical polymerization of 2,5‐bis‐dithienyl‐1H‐pyrrole (SNS) main chain, has been prepared. The electrochemical and optical properties of SNSC monomer and its polymer have been investigated. Because of having two different electro‐donor moieties; that is, carbazole and SNS, SNSC gave two separate electrochemical oxidation and also light brown color of the film in the neutral state turn into gray on oxidation. An electrochromic device, contructed in the sandwich configuration [indium tin oxide (ITO)‐coated glass/anodically coloring polymer (poly‐SNSC)//gel electrolyte//cathodically coloring polymer (PEDOT)/ITO‐coated glass] and exhibited a high coloration efficiency (1216 cm² C^–1), a very short response time (about 0.3 s), low driving voltage, and a high redox stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Electroenzymatic Nitrogen Fixation Using a MoFe Protein System Immobilized in an Organic Redox Polymer

We report an organic redox‐polymer‐based electroenzymatic nitrogen fixation system using a metal‐free redox polymer, namely neutral‐red‐modified poly(glycidyl methacrylate‐co‐methylmethacrylate‐co‐poly(ethyleneglycol)methacrylate) with a low redox potential of ?0.58 V vs. SCE. The stable and efficient electric wiring of nitrogenase within the redox polymer matrix enables mediated bioelectrocatalysis of N₃^?, NO₂^? and N₂ to NH₃ catalyzed by the MoFe protein via the polymer‐bound redox moieties distributed in the polymer matrix in the absence of the Fe protein. Bulk bioelectrosynthetic experiments produced 209±30 nmol NH₃ nmol MoFe^?1 h^?1 from N₂ reduction. ¹⁵N₂ labeling experiments and NMR analysis were performed to confirm biosynthetic N₂ reduction to NH₃.     

Mixed-ligand complexes of osmium(III)/(IV) 8-quinolinolates: synthesis,characterization and redox behaviour

Summary A group of mixed-tris chelates of osmium(III) and osmium(IV) of type [OsAQ₂]^{0/1 +} [HA = glycine (glyH), picolinic acid (PicH) and quinaldic acid (qndH); HQ = 8-quinolinol] were prepared and characterized by physicochemical, magnetic and spectroscopic methods. The complexes exhibit several spin-allowed and spin-forbidden absorption bands and shoulders in the 200–700 nm region. The new chelates are electroactive and display nearly reversible Os^IV-Os^III and Os^III-Os^II couples in the ca. –1.1 to +0.3 V range versus s.c.e. The stability of metal oxidation states is discussed in terms of the electrochemical results.     

Direct electrochemistry and spectroelectrochemistry of osmium substituted horseradish peroxidase

In this contribution the substitution of the central protoporphyrin IX iron complex of horseradish peroxidase by the respective osmium porphyrin complex is described. The direct electrochemical reduction of the Os containing horseradish peroxidase (OsHRP) was achieved at ITO and modified glassy carbon electrodes and in combination with spectroscopy revealed the three redox couples Os^IIIHRP/Os^IVHRP, Os^IVHRP/Os^VHRP and Os^VHRP/Os^VIHRP. The midpoint potentials differ dependent on the electrode material used with E_1/2 (Os^III/IV) of − 0.4 V (ITO) and − 0.25 V (GC), E_1/2 (Os^IV/^V) of − 0.16 V (ITO) and + 0.10 V (GC), and E_1/2 (Os^V/VI)of + 0.18 V (ITO), respectively. Moreover, with immobilised OsHRP the direct electrocatalytic reduction of hydrogen peroxide and tert-butyl hydroperoxide was observed. In comparison to electrodes modified with native HRP the sensitivity of the OsHRP-electrode for tert-butyl hydroperoxide is higher.     

Novel triarylamine‐based alternating conjugated polymer with high hole mobility: Synthesis,electro‐optical,and electronic properties

Novel bi‐triphenylamine‐containing aromatic dibromide M3 , N,N‐bis(4‐bromophenyl)‐N′,N′‐dipheny‐l,4‐phenylenediamine, was successfully synthesized. The novel conjugated polymer P1 having number‐average molecular weight of 1.31 × 10⁴ was prepared via Suzuki coupling from the dibromide M3 and 9,9‐dioctylfluorene‐2,7‐diboronic acid bis(1,3‐propanediol) ester. Polymer P1 had excellent thermal stability associated with a high glass‐transition temperature (T_g = 141 °C). The hole‐transporting and UV‐vis‐near‐infrared electrochromic properties were examined by electrochemical and spectroelectrochemical methods. Cyclic voltammograms of the conjugated polymer films cast onto indium‐tin oxide‐coated glass substrates exhibited two reversible oxidation redox couples at E_1/2 values of 0.73 and 1.13 V versus Ag/Ag⁺ in acetonitrile solution. The hole mobility of the conjugated polymer P1 revealed ～10^?3 cm² V^?1 s^?1, which is much higher than that of other conjugated polymer systems. The observed UV‐vis‐near‐infrared absorption change in the conjugated polymer film P1 at applied potentials ranging from 0.00 to 1.23 V are fully reversible and associated with strong color changes from pale yellowish in its neutral form to green and blue in its oxidized form. Using a combination of experimental study and theoretical investigation, we proposed an oxidation mechanism based on molecular orbital theory, which explains the cyclic voltammetry experimental results well. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Osmium Redox Polymer Film Electrode and Its Electrocatalytic Properties towards the Oxidation of Epinephrine: Electrochemical Quartz-Crystal Microbalance and Voltametric Characterization

An osmium redox polymer PVI-PAA-dmeOs is electrodeposited onto a gold electrode by using repetitive double potential step chronoamperometry. The resulting film is permeable to the substrates and products of the catalyzed reaction, and permits fast electron transfer. The frequency variation during the potential step process is recorded using electrochemical quartz-crystal microbalance (EQCM). A reaction mechanism for electrochemical deposition of the osmium redox polymer is proposed. The characteristics of the PVI-PAA-dmeOs film are investigated by EQCM and cyclic voltametry. The results show the hydrated osmium PVI-PAA-dmeOs film to exhibit excellent electrocatalytic activity towards the oxidation of epinephrine. At a bare gold electrode, the epinephrine oxidation current increases greatly and the oxidation peak potential negatively shifts to about 0.16 V (Ag/AgCl) at the film-modified electrode. Under optimal conditions, amperometric measurements are performed at 0.18 V and the current response of epinephrine changes linearly with its concentration from 5 × 10^?7 to 1 × 10^?4 mol l^?1. A detection limit of 1.5 × 10^?7 mol l^?1 (S/N = 3) is obtained.     

Functionalized conducting polymers for chemical sensors – an in situ ESR/UV‐Vis‐NIR voltammetric study

The redox and optical properties of various well defined polymer and copolymer films containing pyrrole or thiophene units were studied. The in situ ESR/UV‐Vis‐NIR spectroelectrochemistry was applied to investigate polymers and copolymers deposited both electrochemically or by a special chemical procedure using adhesion promoter onto the optically transparent indium‐tin‐oxide (ITO) electrodes. The spectroelectrochemical responses of chemically and electrochemically prepared polythiophenes on ITO were compared and the electronic structures of both polymers found to be similar. In situ ESR/UV‐Vis‐NIR voltammetric studies on electrochemically prepared copolymers containing pyrrole units and various N,N′‐ethylene‐bis(salicylidenimine) (salen) transition metal complexes indicate the presence of both polysalen and polypyrrole redox active centers in the copolymer.