Copper‐Catalyzed Reductive N‐Alkylation of Amides with N‐Tosylhydrazones Derived from Ketones

A CuI‐catalyzed reductive coupling of ketone‐derived N‐tosylhydrazones with amides is presented. Under the optimized conditions, an array of N‐tosylhydrazones derived from aryl–alkyl and diaryl ketones could couple effectively with a wide variety of (hetero)aryl as well as aliphatic amides to afford the N‐alkylated amides in high yields. The method represents the very few examples for reliably accessing secondary and tertiary amides through a reductive N‐alkylation protocol.     

Copper‐Mediated ortho‐Nitration of (Hetero)Arenecarboxylates

Various (hetero)arenecarboxylic acids were converted to the corresponding Daugulis amides and nitrated selectively in the ortho‐position in the presence of [CuNO₃(PPh₃)₂] and AgNO₂ at 50 °C. A microwave‐assisted saponification allows regenerating the carboxylate group within minutes, which may then be removed tracelessly by protodecarboxylation, or substituted by aryl‐ or alkoxy‐groups via decarboxylative cross‐coupling.     

Ligand‐free CuTC‐catalyzed N‐arylation of amides,anilines and 4‐aminoantipyrine: synthesis of N‐arylacrylamides, 4‐amido‐N‐phenylbenzamides and 4‐amino(N‐phenyl)antipyrenes

N‐Arylation of amides and anilines with aryl iodides was efficiently catalyzed by copper thiophenecarboxylate under ligand‐free conditions with good to excellent yields. A variety of substituted aryl iodides, amides, anilines and 4‐aminoantipyrine were found to be applicable to the simple catalytic system. Furthermore, some practical, unique secondary amides, such as N‐arylacrylamides and 4‐amido‐N‐phenylbenzamides, and 4‐amino(N‐phenyl)antipyrenes, which are difficult to obtain by the classical methods, were prepared. Copyright © 2013 John Wiley & Sons, Ltd.     

A New Class of Amide Ligands Enable Cu‐Catalyzed Coupling of Sodium Methanesulfinate with (Hetero)aryl Chlorides

((2S ,4R )‐4‐Hydroxy‐N ‐(2‐methylnaphthalen‐1‐yl)pyrrolidine‐2‐carboxamide (HMNPC), an amide derived from 4‐hydroxy‐L ‐proline and 2‐methyl naphthalen‐1‐amine, is a powerful ligand for Cu‐catalyzed coupling of (hetero)aryl halides with sulfinic acid salts, allowing for first time the metal‐catalyzed coupling of (hetero)aryl chlorides and NaSO₂Me. A considerable number of (hetero)aryl chlorides worked well, providing the pharmaceutically important (hetero)aryl methylsulfones in good to excellent yields.     

Preparation and Application of Solid,Salt‐Stabilized Zinc Amide Enolates with Enhanced Air and Moisture Stability

The treatment of various N‐morpholino amides with TMPZnCl⋅LiCl (TMP=2,2,6,6‐tetramethylpiperidyl) and Mg(OPiv)₂ in THF at 25 °C provides solid zinc enolates with enhanced air and moisture stability (t _1/2 in air: 1–3 h) after solvent evaporation. These enolates undergo Pd‐ and Cu‐catalyzed cross‐couplings with (hetero)aryl bromides as well as allylic and benzylic halides. The arylated N‐morpholino amides were converted into various ketones by LaCl₃⋅2 LiCl mediated acylation with Grignard reagents. The new, solid enolates were used to prepare a potent anti‐breast‐cancer drug candidate in six steps and 23 % overall yield.     

Selective Monoarylation of Primary Amines Using the Pd‐PEPPSI‐IPentCl Precatalyst

A single set of reaction conditions for the palladium‐catalyzed amination of a wide variety of (hetero)aryl halides using primary alkyl amines has been developed. By combining the exceptionally high reactivity of the Pd‐PEPPSI‐IPent^Cl catalyst (PEPPSI=pyridine enhanced precatalyst preparation, stabilization, and initiation) with the soluble and nonaggressive sodium salt of BHT (BHT=2,6‐di‐tert‐butyl‐hydroxytoluene), both six‐ and five‐membered (hetero)aryl halides undergo efficient and selective amination.     

Synthesis of All‐Carbon Quaternary Centers by Palladium‐Catalyzed Olefin Dicarbofunctionalization

The redox‐neutral dicarbofunctionalization of tri‐ and tetrasubstituted olefins to form a variety of (hetero)cyclic compounds under photoinduced palladium catalysis is described. This cascade reaction process was used to couple styrenes or acryl amides with a broad range of highly decorated olefins tethered to aryl or alkyl bromides (>50 examples). This procedure enables one or two contiguous all‐carbon quaternary centers to be formed in a single step. The products could be readily diversified and applied in the synthesis of a bioactive oxindole analogue.     

A Metal‐free Approach to 3‐Aryl‐3‐hydroxy‐2‐oxindoles by Treatment of 3‐Acyloxy‐2‐oxindoles with Diaryliodonium Salts

A mild, metal‐free approach has been realized for the facile construction of highly valuable 3‐(hetero)aryl‐3‐hydroxy‐2‐oxindoles. Direct arylations of 3‐acyloxy‐2‐oxindoles with diaryliodonium salts as arylation reagents are implemented in the presence of K₂CO₃ at room temperature without using an organometallic promoter to deliver an array of 3‐(hetero)aryl‐3‐hydroxy‐2‐oxindoles in good yields.     

BippyPhos: A Single Ligand With Unprecedented Scope in the Buchwald–Hartwig Amination of (Hetero)aryl Chlorides

Over the past two decades, considerable attention has been given to the development of new ligands for the palladium‐catalyzed arylation of amines and related NH‐containing substrates (i.e., Buchwald–Hartwig amination). The generation of structurally diverse ligands, by research groups in both academia and industry, has facilitated the accommodation of sterically and electronically divergent substrates including ammonia, hydrazine, amines, amides, and NH heterocycles. Despite these achievements, problems with catalyst generality persist and access to multiple ligands is necessary to accommodate all of these NH‐containing substrates. In our quest to address this significant limitation we identified the BippyPhos/[Pd(cinnamyl)Cl]₂ catalyst system as being capable of catalyzing the amination of a variety of functionalized (hetero)aryl chlorides, as well as bromides and tosylates, at moderate to low catalyst loadings. The successful transformations described herein include primary and secondary amines, NH heterocycles, amides, ammonia and hydrazine, thus demonstrating the largest scope in the NH‐containing coupling partner reported for a single Pd/ligand catalyst system. We also established BippyPhos/[Pd(cinnamyl)Cl]₂ as exhibiting the broadest demonstrated substrate scope for metal‐catalyzed cross‐coupling of (hetero)aryl chlorides with NH indoles. Furthermore, the remarkable ability of BippyPhos/[Pd(cinnamyl)Cl]₂ to catalyze both the selective monoarylation of ammonia and the N‐arylation of indoles was exploited in the development of a new one‐pot, two‐step synthesis of N‐aryl heterocycles from ammonia, ortho‐alkynylhalo(hetero)arenes and (hetero) aryl halides through tandem N‐arylation/hydroamination reactions. Although the scope in the NH‐containing coupling partner is broad, BippyPhos/[Pd(cinnamyl)Cl]₂ also displays a marked selectivity profile that was exploited in the chemoselective monoarylation of substrates featuring two chemically distinct NH‐containing moieties.     

Stereoselective Synthesis and Physicochemical Properties of Liquid‐Crystal Compounds Possessing a trans‐2,5‐Disubstituted Tetrahydropyran Ring with Negative Dielectric Anisotropy

Three stereoselective syntheses and the physicochemical properties of trans,trans‐5‐(4‐ethoxy‐2,3‐difluorophenyl)‐2‐(4‐propylcyclohexyl)tetrahydropyran, which is an important liquid‐crystal compound with a large negative dielectric anisotropy (Δε=?7.3), are described. The key step in the construction of the trans‐2,5‐disubstituted tetrahydropyran ring in the first approach involved a benzylic cation mediated intramolecular olefin cyclization of a 2‐allyloxy‐1‐arylethanol derivative. The second method included the Et₂Zn‐induced 1,2‐aryl shift of a bromohydrin obtained from a hetero‐Diels–Alder reaction, followed by stereoselective bromination. The third approach utilized the hetero‐Diels–Alder reaction of trans‐4‐propylcyclohexanecarboxaldehyde and a 2‐aryl‐3‐(trimethylsilyl)oxy‐1,3‐butadiene, followed by stereoselective protonation. From results obtained by using a quantum chemical calculation method, the reason why the target compound shows a large negative Δε value is discussed.     

PhPAd‐DalPhos: Ligand‐Enabled,Nickel‐Catalyzed Cross‐Coupling of (Hetero)aryl Electrophiles with Bulky Primary Alkylamines

The base metal‐catalyzed C?N cross‐coupling of bulky α,α,α‐trisubstituted primary alkylamines with (hetero)aryl electrophiles represents a challenging and under‐developed class of transformations that is of significant potential utility, including in the synthesis of lipophilic active pharmaceutical ingredients. Herein, we report that a new, air‐stable Ni(II) pre‐catalyst incorporating the optimized ancillary ligand PhPAd‐DalPhos enables such transformations of (hetero)aryl chloride, bromide, and tosylate electrophiles to be carried out for the first time with substrate scope rivalling that achieved using state‐of‐the‐art Pd catalysts, including room temperature cross‐couplings of (hetero)aryl chlorides that are unprecedented for any catalyst (Pd, Ni, or other).     

PhPAd‐DalPhos: Ligand‐Enabled,Nickel‐Catalyzed Cross‐Coupling of (Hetero)aryl Electrophiles with Bulky Primary Alkylamines

The base metal‐catalyzed C?N cross‐coupling of bulky α,α,α‐trisubstituted primary alkylamines with (hetero)aryl electrophiles represents a challenging and under‐developed class of transformations that is of significant potential utility, including in the synthesis of lipophilic active pharmaceutical ingredients. Herein, we report that a new, air‐stable Ni(II) pre‐catalyst incorporating the optimized ancillary ligand PhPAd‐DalPhos enables such transformations of (hetero)aryl chloride, bromide, and tosylate electrophiles to be carried out for the first time with substrate scope rivalling that achieved using state‐of‐the‐art Pd catalysts, including room temperature cross‐couplings of (hetero)aryl chlorides that are unprecedented for any catalyst (Pd, Ni, or other).     

A Divergent Approach to the Diastereoselective Synthesis of 3,3‐Disubstituted Oxindoles from Atropisomeric N‐Aryl Oxindole Derivatives

3,3‐Disubstituted oxindoles were divergently synthesized by diastereoselective transformations including nucleophilic addition, alkylation, and cycloaddition using common, axially chiral N‐aryl oxindoles. Notably, high diastereoselectivities (up to >95:5) were observed with ortho‐monosubstituted N‐aryl oxindoles to give various oxindole scaffolds, and facile removal of the p‐(benzyloxy)aryl moiety in axially twisted amides was achieved by a mild, two‐step sequence.     

PAd2‐DalPhos Enables the Nickel‐Catalyzed C−N Cross‐Coupling of Primary Heteroarylamines and (Hetero)aryl Chlorides

Base‐metal catalysts capable of enabling the assembly of heteroatom‐dense molecules by cross‐coupling of primary heteroarylamines and (hetero)aryl chlorides, while sought‐after given the ubiquity of unsymmetrical di(hetero)arylamino fragments in pharmacophores, are unknown. Herein, we disclose the new “double cage” bisphosphine PAd2‐DalPhos ( L2 ). The derived air‐stable Ni^II pre‐catalyst C2 functions well at low loadings in challenging test C?N cross‐couplings with established substrates, and facilitates the first Ni‐catalyzed C?N cross‐couplings of primary five‐ or six‐membered ring heteroarylamines and activated (hetero)aryl chlorides, with synthetically useful scope that is competitive with Pd catalysis.     

One‐pot Synthesis of 2,5‐Disubstituted‐1,3,4‐oxadiazoles Based on the Reaction of N,N‐Dimethyl Amides with Acid Hydrazides

Convenient and efficient one pot method for the synthesis of 2,5‐disubstituted‐1,3,4‐oxadiazoles based on the reaction of N,N‐dimethyl amides with acid hydrazides has been developed. The methodology is applied to a wide range of difference aryl hydrazide and difference N,N‐dimethyl amides to 2,5‐disubstituted‐1,3,4‐oxadiazoles yield the in good to excellent yields. It will be possible wide useful application in synthesis.     

Novel Aryl‐Modified Benzoylamino‐N‐(5,6‐dimethoxy‐1H‐benzoimidazol‐2‐yl)‐heteroamides as Potent Inhibitors of Vascular Endothelial Growth Factor Receptors 1 and 2

Tumor angiogenesis has become an important target for antitumor therapy, with most current therapies aimed at blocking the vascular endothelial growth factor (VEGF) pathway. The VEGF and its receptors have been implicated as key factors in tumor angiogenesis and are major targets in cancer therapy. A series of aryl‐modified benzoylamino‐N‐(5,6‐dimethoxy‐1H‐benzoimidazol‐2‐yl)‐heteroamides were synthesized from 2‐amino‐5,6‐dimethoxy benzimidazole and aryl‐substituted benzoylamino hetero acids. The new compounds were tested for inhibition of VEGF receptors I and II (VEGFR‐1 and VEGFR‐2). Compound 6e displayed VEGFR‐2 inhibitory activity with a 50% inhibition concentration value as low as 0.020 μM in a homogeneous time‐resolved fluorescence enzymatic assay. VEGFR‐2 active compounds display good activity against VEGFR‐1 as well.     

Light‐Induced CH Arylation of (Hetero)arenes by In Situ Generated Diazo Anhydrides

Diazo anhydrides (Ar?N?N?O?N?N?Ar) have been known since 1896 but have rarely been used in synthesis. This communication describes the development of a photochemical catalyst‐free C?H arylation methodology for the preparation of bi(hetero)aryls by the one‐pot reaction of anilines with tert‐butyl nitrite and (hetero)arenes under neutral conditions. The key step in this procedure is the in situ formation and subsequent photochemical (>300 nm) homolytic cleavage of a transient diazo anhydride intermediate. The generated aryl radical then efficiently reacts with a (hetero)arene to form the desired bi(hetero)aryls producing only nitrogen, water, and tert‐butanol as byproducts. The scope of the reaction for several substituted anilines and (hetero)arenes was investigated. A continuous‐flow protocol increasing selectivity and safety has been developed enabling the experimentally straightforward preparation of a variety of substituted bi(hetero)aryls within 45 min of reaction time.     

Palladium(II)‐N‐Heterocyclic Carbene Complexes: Efficient Catalysts for the Direct C‐H Bond Arylation of Furans with Aryl Halides

This paper contains the synthesis and characterization of the seven new benzimidazolium salts and their corresponding new palladium(II)‐NHC complexes with the general formula [PdX₂(NHC)₂], (NHC = N‐heterocyclic carbene, X = Cl or Br), and also their catalytic activity in direct C‐H bond arylation of 2‐substituted furan derivatives with aryl bromides and aryl chlorides. Under the optimal conditions, these palladium(II)‐NHC complexes showed the good catalytic performance for the direct C‐H bond arylation of 2‐substituted furans with (hetero)aryl bromides, and with readily available and inexpensive aryl chlorides. The C‐H bond arylation regioselectively produced C5‐arylated furans by using 1 mol% of the palladium(II)‐NHC catalysts in moderate to high yields.     

Regioselective Ruthenium‐Catalyzed Carbonylative Direct Arylation of Five‐Membered and Condensed Heterocycles

A ruthenium‐catalyzed carbonylative C?H bond arylation process for the three‐component synthesis of complex aryl–(hetero)aryl ketones in an aqueous solution has been developed. By exploiting the ortho‐activating effect of nitrogen‐containing directing groups, a regioselective, successive twofold C(sp²)?C(sp²) bond formation has been achieved. This straightforward catalytic process provides access to versatile products prevalent in multiple bioactive compounds and supplies a valuable functional group for subsequent transformations.