Cl2 adsorption on MgO(001) surface supported sodium monolayers: a density functional theory study

The adsorption of Cl₂ Na monolayers supported on the MgO(001) surface has been studied by the density functional method using cluster models embedded in a large array of point charges (PCs). The value of PCs was determined by charge self-consistent technique. The results indicate that Na-promoted MgO(001) surface is an efficient catalyst toward Cl₂ adsorptive decomposition. Besides, it was found that the role of the MgO(001) surface is not passive, which is different from CO adsorption on MgO(001) surface supported Na metal monolayers. The analysis of band and projected density of states indicates that the electron transfer from the surface Mg 3s valence orbital and Na 3s valence orbital to the anti-bonding σ^∗ orbital of Cl₂ is the source of the Cl₂ bond weakening. This is also different from the CO adsorption on MgO(001) surface supported Na metal monolayers, where only the electrons from the Na valence orbital are transferred to the anti-bonding π^∗ orbital of adsorbed CO. Our study suggests that the essence of catalysis is different for CO and Cl₂ adsorption on Na metal monolayers supported an MgO(001) surface.     

H2O在SrTiO3-(001)TiO2表面上吸附和解离的密度泛函理论研究

利用密度泛函理论研究了0.25单层(ML),0.5ML,0.75ML和1ML吸附率下H2O在SrTiO3-(001)TiO2表面上的吸附行为.比较了不同吸附率下分子吸附和解离吸附的稳定性,利用微动弹性带(nudged elastic band)方法计算了H2O的解离势垒.结果表明:在低吸附率(0.25ML和0.5ML)时,H2O表现为解离吸附;在0.75ML吸附率下,分子吸附和解离吸附同时存在;而在全吸附(吸附率为1ML)时,分子吸附更稳定.基于对H2O分子与表面之间以及H2O分子之间的电荷转移和相互作用的分析,讨论了吸附率对H2O吸附和解离的影响.     

3d过渡金属原子单层在Pd(001)表面磁性的第一性原理研究

用第一性原理基础上的超软赝势方法的总能计算，研究了3d过渡金属(Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn)在Pd(001)表面的单层p(1×1)和c(2×2)结构的表面磁性和总能. 所得结果表明：对于Sc, Ti, V和Cr只存在p(1×1)的铁磁性结构，而Mn只有c(2×2)的反铁磁结构存在. Fe, Co和Ni这三种元素上述两种结构都存在，但是总能上p(1×1)的铁磁结构要低些，因此是比较稳定的结构. 而Cu和Zn在该表面上的单层中不存在上述两种结构. 对于V的p(1×1)铁磁结构，计算得到的每个V原子磁矩为2.41μ_B，大于用全电子方法得到的0.51μ_B. 两种计算方法得到其他金属原子 (Cr，Mn，Fe，Co，Ni)的表面磁矩比较相近，都比孤立原子磁矩略小. 关键词： Pd(001)表面 过渡金属原子单层 表面磁性     

Local suppression of ferroelectricity at PbTiO3 surface steps: a density functional theory study

Ab initio (first-principles) density functional theory (DFT) calculations are performed within the local density approximations (LDA) to investigate the ferroelectricity at PbTiO(3) surface steps consisting of (001) and (100) surfaces with a spontaneous polarization along [100]. For both the PbO- and TiO(2)-terminated surface steps, the [100] polarization is suppressed and the [001] polarization appears at their upper terraces, which results in a rotation of polarizations at the surface steps. The polarization rotation is induced by the local variation of the covalent Pb-O bond due to the charge redistribution at the surface steps. Furthermore, we investigate the interaction of the surface steps. Although surface steps with the same polarization configuration exhibit little interaction, steps of different types interact with each other strongly, suppressing the ferroelectricity, especially on the upper terrace.     

Formation of Heusler alloy Co2FeSi thin films on the surface of single-crystal silicon

The initial stages of Heusler alloy (Co₂FeSi) thin film growth by reactive epitaxy on the Si(100)2 × 1 surface are studied, and formation conditions for this alloy are found. At a substrate temperature of lower than, or equal to, 180°C, an island film of ternary Co-Fe-Si film grows on the surface. The silicon content in this film is lower than in the compound to be synthesized. The film becomes continuous when its thickness exceeds 1.2 nm. It is shown that post-growth annealing at 240°C can raise the silicon content in the film and be conducive to obtaining Heusler alloy of a desired composition. In situ measurements of the films show that ferromagnetic ordering in them has a threshold and shows up at the coalescence growth stage of the Co-Fe-Si island alloy.     

Spectral density of surface states: Clean W(001) surface

The transfer matrix approach is applied to calculate the spectral density of electronic states for the W(001) surface. We use a tight-binding hamiltonian with a nine function basis: 6s, 6p and 5d. Results for $\text{k}$ points along the Σ and ? symmetry lines are presented for occupied states. Both surface and bulk features of the spectral density are in good agreement with angularly resolved photoemission spectra.     

Spintronic properties of the Ti2CoB Heusler compound by density functional theory

The electronic structure and magnetic properties of the Ti₂CoB Heusler compound with a high-ordered CuHg₂Ti structure were investigated using the self-consistent full potential linearized augmented plane wave (FPLAPW) method within the density functional theory (DFT). Spin-polarized calculations show that the Ti₂CoB compound is half-metallic ferromagnetic with a magnetic moment of 2 μ_B at the equilibrium lattice constant, a=5.74 Å. The Ti₂CoB Heusler compound is ferromagnetic below the equilibrium lattice constant and ferrimagnetic above the equilibrium lattice constant. A large peak in majority-spin DOS and an energy gap in minority-spin DOS are observed at the Fermi level, yielding a spin polarization of 100%. A spin polarization higher than 90% is achieved for a wide range of lattice constants between 5.6 and 6.0 Å.     

Density functional theory investigation of carbon monoxide adsorption on the kaolinite(001) surface

Carbon monoxide(CO) is a gaseous pollutant with adverse effects on human health and the environment. Kaolinite is a natural mineral resource that can be used for different applications, including that it can also be used for retention of pollutant gases. The adsorption behavior of carbon monoxide molecules on the(001) surface of kaolinite was studied systematically by using density-functional theory and supercell models for a range coverage from 0.11 to 1.0 monolayers(ML). The CO adsorbed on the three-fold hollow, two-fold bridge, and one-fold top sites of the kaolinite(001) was tilted with respect to the surface. The strongest adsorbed site of carbon monoxide on the kaolinite(001) surface is the hollow site followed by the bridge and top site. The adsorption energy of CO decreased when increasing the coverage, thus indicating the lower stability of surface adsorption due to the repulsion of neighboring CO molecules. In addition to the adsorption structures and energetics, the lattice relaxation, the electronic density of states, and the different charge distribution have been investigated for different surface coverages.     

Surface resonance on the NiFe(001) alloy surface

First principles calculations based on density-functional theory are used to investigate the geometrical and electronic structure of a NiFe(001) invar surface. We use different ordered as well as alloy fcc-like structures to simulate the system. Ab initio atomic force minimizations show that the (001) invar surface is rumpled; Fe atoms are shifted outwards, Ni atoms inwards. A surface resonance is observed at (0.1–1.0) eV below the Fermi level, depending on the chemical ordering at and below the surface. Our calculations show that this resonance is pronounced in iron-rich surface regions. Presented at the X-th Symposium on Suface Physics, Prague, Czech Republic, July 11–15, 2005.     

Adhesion at a heterophase interface: First-principles study of Mo(001)/MoSi2(001)

The bonding characteristics, interfacial energetics, and electronic structure associated with adhesion at the Mo-MoSi₂(001) heterophase interface are investigated using the first-principles, self-consistent local orbital method. We found both the adhesive energy and peak interfacial strength for the interface to be 10%-15% smaller than the respective values for cleavage along the (001) planes in crystalline Mo and MoSi₂. The equilibrium interlayer separation between Mo and MoSi₂ is found to lie between the interplanar spacings of crystalline Mo and MoSi₂. The interfacial adhesive bonding is attributable to the combination of a nearly uniform band of charge accumulation at the interface and directional charge accumulation between atoms across the interface. These first-principles calculations demonstrate that the universal-binding-energy relation can be extended to describe adhesion between dissimilar materials.     

Adsorption of atomic oxygen on cubic PbTiO3 and LaMnO3 (001) surfaces: A density functional theory study

We present and discuss density functional theory calculations addressing the electronic structure and energetics of isolated oxygen ad-atoms at the (001) surfaces of PbTiO₃ (PTO) and LaMnO₃ (LMO) cubic perovskites. Both AO- and BO₂-type of surface terminations are considered for each perovskite. Difference electron density analysis has been carried out for each surface to probe local electronic charge redistribution upon oxygen adsorption. Our results show that the (001) surfaces of the two perovskites behave quite differently towards oxygen adsorption. In the case of the PTO (001) surfaces, the adsorbate oxygen atom was found to form a peroxide-type molecular species along with a surface lattice oxygen atom on both PbO- and TiO₂-terminated surface facets. On the other hand, the most stable oxygen adsorption site for the LMO (001) surfaces corresponds to the one expected from a natural continuation of the perovskite lattice. Moreover, the dissociative adsorption of molecular oxygen varies from being only slightly exothermic on the PTO (001) facets to being highly exothermic on the LMO (001) facets. The AO-terminated facets, in general, showed a stronger binding to the adsorbed oxygen.     

Magnetisation density in the Heusler alloy Fe2MnSi

The magnetisation density distribution in the Heusler alloy Fe₂MnSi has been determined using polarised neutron diffraction. The results have been fitted with a simple free atom model which gives the amplitude of the moment and the symmetry of the magnetisation of each of the two transition metal sites. This fitting reveals a small negative moment on the silicon site. The results are compared with those obtained for Fe₃Si and Fe₃Al and with the predictions of a band structure calculation.     

硫原子在镍基合金825(001)面吸附的第一性原理研究

元素硫在镍基合金表面吸附产生严重的电化学腐蚀,为从原子尺度研究硫腐蚀机理,采用第一性原理方法,构建并优化了镍基合金825的晶胞结构模型,计算分析了S原子在镍基合金825耐蚀性较差面(001)晶面的吸附及电子转移情况.结果表明:Ni原子占据顶角, Cr原子和Fe原子对称占据面心是镍基合金825稳定的晶胞结构;原子S在镍基合金825(001)面上最稳定的吸附位为四重穴位,吸附能为-6.51 eV; S吸附前后的态密度(DOS)和二维电荷差分密度图(DCD)对比发现,镍基合金825中Fe与S之间电荷偏移明显,形成离子键,易生成腐蚀产物Fe_xS_y. S的吸附对镍基合金825中Cr原子的电子分布影响不大,且合金中Cr和Ni抑制了合金中Fe与S之间的相互作用,从而提高了合金耐蚀性.     

Co_2B_n(n=1-8)团簇几何结构的密度泛函理论研究

受到小型环状和管状的双金属掺杂硼团簇的启发,采用密度泛函理论,在B3LYP/6-311+G(d)水平下对Co_2B_n(n=1-8)团簇的几何结构、相关稳定性、电子性质和磁性进行了的研究.研究结果表明:当n≤5时,团簇的最低能量结构为平面结构.当6≤n≤8时,团簇的最低能量结构为立体结构.对团簇的平均原子结合能、二阶差分能量、HOMO-LUMO能隙、垂直电子亲和能、垂直电离能和化学硬度分析结果表明,Co2B_7具有幻数特征.对Co_2B_n(n=1-8)团簇的总磁矩计算表明其和团簇的自旋态有很强的关系,而且团簇的总磁矩主要由钴原子的3d轨道所贡献.     

Density functional theory study of the water adsorption at Bi(111) electrode surface

The adsorption of a water molecule on a basal Bi(111) electrode surface, crystallising in the rhombohedral system, has been studied in the framework of cluster model. The quantum chemical calculations were performed at the Density Functional Theory (DFT) level and the electrical double layer effects were analysed by using an external electric field. In contrast to computational predictions reported previously for other metal surfaces, crystallising in the face-centred cubic or hexagonal close-packed systems, a hollow site for Bi(111) was found to be energetically the most preferable; the water adsorption energy amounts to ? 28 kJ mol^? 1. In a wide range of surface charge densities the water molecule is bound preferentially through the O atom in orientation perpendicular to the surface plane. The Bi(111) hydrophilic properties are compared with those for other metals. Some adsorption characteristics of a hydrogen atom and a hydroxyl group at Bi(111) are reported as well, which give evidence in favour of the non-dissociative adsorption of water molecules.     

First-principle study of full Heusler Co2Y Si using PBE0 hybrid functional

First-principle self-consistent full potential linear augmented plane wave calculations based on density functional theory using hybrid functional PBE0 are performed to study magnetic moments, density of states and half-metallicity of L2₁ type full Heusler alloys with formula Co₂Y Si. Y is Ti, V, Mn and Fe. We have compared these results with those of the PBE-GGA exchange correlation functional and the LDA + U method. The results for Co₂FeSi and Co₂MnSi are completely different; using the PBE0 hybrid functional for Co₂FeSi predicts experimental magnetic moment and also predicts this material to be half-metallic ferromagnet, while using PBE-GGA predicts it not to be half-metal. The results of PBE0 are more similar to the ones obtained by LDA + U method.     

N/Fe共掺杂锐钛矿TiO2(101)面协同作用的第一性原理研究

基于周期性密度泛函理论研究了N/Fe共掺杂对锐钛矿TiO₂(101)面的修饰作用. 计算了铁替位单掺杂TiO₂(101)面及晶体内部后, 晶体结构变化及形成能. 通过形成能的比较发现, Fe从晶体表面向体内迁移时受到势垒阻碍作用. 同时, 对不同位置表面N/Fe近邻共掺杂晶体形成能的比较, 得出了表面共掺杂的最稳定结构. 通过对电子结构及态密度的分析发现: 表面共掺杂态中, N/Fe共掺杂可改变TiO₂(101)面的电子结构, 并使TiO₂由半导体性向半金属性转变. 关键词： 2(101)面')" href="#">锐钛矿TiO₂(101)面 N/Fe共掺杂 第一性原理 半金属性     

Formation of a missing row reconstruction on a Cu(100) surface: An atom scale density functional theory based study

The oxygen-induced reconstruction of Cu(100) surfaces has been studied in great detail. Experimentally, missing row reconstruction occurs with an O coverage of 0.5 monolayer (ML). Several DFT-based calculations of vacancy-surface Cu pairs were performed at O coverage between 0 and 0.5 ML. No structure was identified in these calculations as being energetically favoured over the ideal Cu(100) structure. When a Cu atom (0.125 ML) was added to the system, a new energetically favourable missing row and added Cu-O-Cu row structure was found. It has been suggested that this structure is an important intermediate step towards the missing row formation. The transition from the missing and added row structure to the (2√2 × √2)R45^o-O reconstruction has the energetic requirement of very good binding sites for the Cu atoms, which can be found on the step boundaries. These results are in excellent agreement with the step edge growth and the formation of strongly anisotropic islands observed by Lahtonen et al. (J. Chem. Phys. 129 (2008) 124703).     

Hydrogen-induced reconstruction on a high step density W(001) surface

The hydrogen-induced reconstruction on a high step density W(001) crystal, ($\text{2}\text{×}\text{2}$)R45°-H, with steps oriented parallel to the [110] and ～ 28 Å average terrace width has been investigated using LEED symmetry, beam shape analyses, and EELS. The symmetry of the LEED pattern is observed to change from p2mg for the ($\text{2}\text{×}\text{2}$)R45° clean surface reconstruction to c2mm for the commensurate phase ($\text{2}\text{×}\text{2}$)R45°-H reconstruction. Correspondingly, the shapes of the half-order beams indicate that the hydrogen-induced reconstruction domains are much less elongated than the clean surface domains. A splitting of each half-order beam into four beams at higher exposures indicates the existence of two domains of the incommensurate phase. A commensurate phase v₁ vibrational loss peak centered at 160 meV in the EELS spectrum broadens on the low-energy side during the incommensurate phase and then shifts toward 130 meV and narrows as the (1×1)-H saturation structure develops. These observations imply that there is no long-range inhibition ( ～ 20 Å) to the formation of either commensurate or incommensurate phase; hydrogen induces a switching of the atomic displacements from 〈110〉 directions on a clean surface to 〈100〉 directions, even with steps oriented parallel to the [110]; and in the incommensurate phase there is a distribution of hydrogen site geometries with the most probable geometry more like the commensurate phase geometry than the saturation phase geometry.