Z箍缩等离子体内爆实验金属丝阵负载优化设计分析

金属丝阵Z箍缩(Z-pinch)内爆是产生强x射线辐射的重要方法之一.在一定脉冲功率加速器条件下，金属丝阵质量和丝阵半径的选择决定了Z-pinch内爆等离子体辐射产额的大小.采用薄壳模型计算了不同丝阵质量、不同丝阵半径、不同粗细和不同材料金属丝构成的丝阵的内爆时间、内爆轨迹、内爆速度，以及最大动能和动能转换率，综合分析了丝间隙、内爆时间、动能转换率与丝阵质量和丝阵半径的关系，给出了在一定负载驱动电流条件下，金属丝阵的最佳参数.分析表明计算结果与实验上观察得到的内爆规律一致. 关键词： Z-pinch内爆等离子体 金属丝阵负载 薄壳模型     

Electromagnetic field perturbation by an internal void in a conducting cylinder excited by a wire loop

A thin prolate spheroidal void in an infinite conducting circular cylinder is used to model an internal flaw in a wire rope. The rope is excited by an electric ring current which is a model for a thin solenoid or multi-turn wire loop. The anomalous external fields are computed from the induced electric and magnetic dipole moments of the void. For this type of excitation, the induced axial magnetic dipole moment is the dominant contributor to the scattered field. The results have application to nondestructive testing of wire ropes.     

金属光学性质对高精度丝径测量中偏振效应的影响

本文主要研究金属细丝的光学性质对高精度丝径测量中偏振效应的影响,由振动平行和垂直于细丝轴线的偏振光的夫琅和费衍射图样得到的丝径值不相同,理论分析表明:这种丝径的差值与金属复数折射率的虚部近似成正比关系增大,而与它的实部无关,一些实验结果与理论分析符合得很好。     

Babinet's principle in the Fraunhofer diffraction by a finite thin wire

The scattered waves by a thin finite wire are evaluated by using the Rayleigh-Sommerfeld integral in the Fraunhofer approximation. The scattered fields by the complementary thin wire are also obtained with the aid of the Babinet's principle. The scattering integrals are evaluated directly. It is shown that Babinet's principle holds excellently for this problem. The scattered fields are examined numerically.     

Explosive fragmentation of a thin ceramic tube using pulsed power

This study experimentally examined the explosive fragmentation of thin ceramic tubes using pulsed power. A thin ceramic tube was threaded on a thin copper wire, and high voltage was applied to the wire using a pulsed power generator. This melted the wire and the resulting vapor put pressure on the ceramic tube, causing it to fragment. We examined the statistical properties of the fragment mass distribution. The cumulative fragment mass distribution obeyed the double exponential or power law with exponential decay. Both distributions agreed well with the experimental data. Finally, we obtained universal scaling for fragmentation, which is applicable to both impact and explosive fragmentation.     

Scattering by a slender void in a homogeneous conducting wire rope

A thin prolate spheroidal void in an infinite conducting circular cylinder is used to model a broken strand in a wire rope. The rope is excited by an azimuthal magnetic line current which is a model for a thin toroidal coil. The anomalous external fields are computed from the induced electric and magnetic dipole moments of the void. The results have applications to nondestructive testing of wire ropes.     

不同电磁脉冲对细导线的耦合

 采用时域有限差分法,结合细线处理方法,分别对超宽带电磁脉冲、快前沿电磁脉冲和核电磁脉冲在自由空间细导线上耦合的电流进行了数值计算,得出了不同前沿和脉宽的电磁脉冲在细导线上的感应电流。     

Self-Induction of a Fine Cylindrical Metallic Wire Versus a Mechanism of Electron Surface Scattering

Technical Physics - The self-induction of a thin cylindrical metallic wire has been calculated. A general case when the ratio of the electron free path to the wire radius may take an arbitrary...     

Bound States for the Three-Dimensional Aharonov-Bohm Quantum Wire

The existence of bound states for the three-dimensional Aharonov-Bohm quantum wire, suggested by Dunne and Jaffe, is established provided the wire is thin enough. Recent results on the Aharonov-Bohm Schrödinger operator on a disk are used.     

Calculation of electric fields induced near metal implants by magnetic resonance imaging switched-gradient magnetic fields

Electric (E) fields induced near metal implants by MRI switched-gradient magnetic fields are calculated by a new equivalent-circuit numerical technique. Induced E-field results are found for a metallic spinal-fusion implant consisting of two thin wires connected to the metallic case of a current generator as well as for its subsections: a bare U-shaped wire, an insulated U-shaped wire, a cut insulated wire, and a generator. The presence of the metallic implants perturbs the E field significantly. Near the ends of the bare U-shaped wire, the E field is 89.7 times larger than in the absence of the wire. The greatest E field concentration occurs near the ends of the cut insulated wire, where the E field is 196.7 times greater than in the absence of the wire. In all cases, the perturbation of the induced E field by the implanted wire is highly localized within a few diameters of the wire.     

Elemental depth profiling with a wire in microbeam X‐ray fluorescence analysis

This study proposes simple techniques involving the use of a thin wire set close to the sample surface to measure the elemental depth distribution in microbeam X‐ray fluorescence analysis. One is the X‐ray fluorescence detection in energy‐dispersive mode using a solid‐state detector in combination with the sample movement, and the other is in projection mode using an X‐ray charge‐coupled device camera. The minimum depth resolution (spatial resolution) obtained with a thin Mo wire is about 15 µm. Compared with a confocal depth‐profiling method, wire depth‐profile analysis is easy to implement, flexible, and has reasonable sensitivity. Copyright © 2011 John Wiley & Sons, Ltd.     

细导线阵列产生负等效介电常数的简单推导

根据周期性细导线阵列结构的等效电路模型,从电介质材料的本构关系出发,推导出细导线阵列结构的等效介电常数的表达式,并从电场强度与电极化强度之间的相位关系,说明在特定的入射电磁波频段,它的等效介电常数为负.     

Evaluation of elastic, elastic-plastic properties of thin Pt wire by?mechanical bending test

A testing methodology to determine the elastic-plastic properties of thin metallic wires is reported. A small-scaled bending test of Pt thin wire and the corresponding finite element analysis are performed. By fitting the load-displacement relationship obtained by finite element analysis to the experimental one, the elastic, elastic-plastic properties of Pt wire are successfully determined.     

同轴交错膜片加载慢波线的分析

膜片加载圆波导是相对论行波管最主要的慢波结构,同轴结构的膜片加载波导可以拓宽带宽。利用变分法对同轴交错膜片加载的慢波结构（亦称同轴径向线）进行了理论分析,得到了色散方程并进行了数值计算。计算结果表明,它比非同轴结构的带宽有明显的增加。     

Length dependence of critical current in thin superconductors

The critical current and its dependence on the length of a thin superconducting wire between two normal metals and the voltage difference across the wire at the critical current is calcualted. The latter arises from the conversion of the normal current into supercurrent and vice versa at the contacts. It is found that the critical current is zero when the length of the wire is π coherence lengths or smaller.     

Small-span bending test for determination of elastic-plastic properties of ultrathin Pt wires

A mechanical testing methodology for determination of elastic-plastic properties of very thin metallic wires using small-span bending under lateral load is described. Sufficient strain is locally developed in the tested section of wire by unsymmetrical bending with two opposite probes where one end of the wire is fixed on a substrate with rigid joint by Joule heat welding. From the load-displacement relationships obtained experimentally, Young’s modulus is determined by analytical formulation. Moreover, yield stress and hardening modulus of the wire are identified using an optimization strategy with finite-element analyses. The thin Pt wires with a nominal diameter of about 625 nm are examined by the testing scheme and the wires are found to have higher yield stress compared to bulk Pt.     

利用磁矢势计算分离均匀载流薄圆筒周围的磁场强度

根据一对反平行无限长载流直导线周围等磁矢势线的特点,与分离载流薄圆筒表面的等磁矢势线进行类比,采用等效替代法方便地得到分离载流薄圆筒周围的等磁矢势线函数与磁场强度函数.     

Skin effect in a thin cylindrical metallic wire

The problem of distribution of the electric field and electric current in a thin cylindrical metallic wire in the presence of the skin effect taking into account specular-diffuse reflection of electrons from the inner surface of the wire has been solved for the first time. The limiting cases have been considered. The obtained results have been discussed.     

Vibrating Wire for Profile Measurements of Thin Beams in Particle Accelerators: Preliminary Tests Using a Laser Beam

The possibility of using a vibrating wire as a target in the method of scanning transverse profiles of the thin beams in particle accelerators has been studied. In the case where the transverse dimensions of the beam are comparable to the amplitude of the wire oscillations, the vibrating wire can be used for a fast measurement of the transverse beam profile without moving the sensor. The scanning procedure is replaced by the use of the movement of the wire during its mechanical oscillations. The method is tested on a focused beam of a semiconductor laser with a spot size at the focus of ～0.1 mm. The reconstruction of the transverse profile is performed on the basis of the measurements of the photons reflected from the vibrating wire by using fast photodiodes.     

Dependence of the electric conductivity of a thin cylindrical wire in a longitudinal magnetic field on the character of electron reflection

The electric conductivity of a cylindrical metal wire in a longitudinal magnetic field is analyzed with regard to the specular-diffuse boundary condition for electrons. Based on the analytic solution obtained, a theoretical interpretation is given to the experimental data on the magnetoresistance of a thin cylindrical wire. An efficient method for determining the specular reflection coefficient of metal surfaces is proposed.