Synthesis, structures, and reactivity of weakly coordinating anions with delocalized borate structure: the assessment of anion effects in metallocene polymerization catalysts.

The formation of adducts of tris(pentafluorophenyl)borane with strongly coordinating anions such as CN(-) and [M(CN)(4)](2)(-) (M = Ni, Pd) is a synthetically facile route to the bulky, very weakly coordinating anions [CN[B(C(6)F(5))(3)](2)](-) and [M[CNB(C(6)F(5))(3)](4)](2-) which are isolated as stable NHMe(2)Ph(+) and CPh(3)(+) salts. The crystal structures of [CPh(3)][CN[B(C(6)F(5))(3)](2)] (1), [CPh(3)][ClB(C(6)F(5))(3)] (2), [NHMe(2)Ph](2)[Ni[CNB(C(6)F(5))(3)](4)].2Me(2)CO (4b.2Me(2)CO), [CPh(3)](2)[Ni[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (4c.2CH(2)Cl(2)), and [CPh(3)](2)[Pd[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (5c.2CH(2)Cl(2)) are reported. The CN stretching frequencies in 4 and 5 are shifted by approximately 110 cm(-1) to higher wavenumbers compared to the parent tetracyano complexes in aqueous solution, although the M-C and C-N distances show no significant change on B(C(6)F(5))(3) coordination. Zirconocene dimethyl complexes L(2)ZrMe(2) [L(2) = Cp(2), SBI = rac-Me(2)Si(Ind)(2)] react with 1, 4c or 5c in benzene solution at 20 degrees C to give the salts of binuclear methyl-bridged cations, [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] and [(L(2)ZrMe)(2)(mu-Me)](2)[M[CNB(C(6)F(5))(3)](4)]. The reactivity of these species in solution was studied in comparison with the known [[(SBI)ZrMe](2)(mu-Me)][B(C(6)F(5))(4)]. While the latter reacts with excess [CPh(3)][B(C(6)F(5))(4)] in benzene to give the mononuclear ion pair [(SBI)ZrMe(+).B(C(6)F(5))(4)(-)] in a pseudo-first-order reaction, k = 3 x 10(-4) s(-1), [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] reacts to give a mixture of L(2)ZrMe(mu-Me)B(C(6)F(5))(3) and L(2)ZrMe(mu-NC)B(C(6)F(5))(3). Recrystallization of [Cp' '(2)Zr(mu-Me)(2)AlMe(2)][CN[B(C(6)F(5))(3)](2)] affords Cp' '(2)ZrMe(mu-NC)B(C(6)F(5))(3) 6, the X-ray structure of which is reported. The stability of [(L(2)ZrMe)(2)(mu-Me)](+)X(-) decreases in the order X = [B(C(6)F(5))(4)] > [M[CNB(C(6)F(5))(3)](4)] > [CN[B(C(6)F(5))(3)](2)] and increases strongly with the steric bulk of L(2) = Cp(2) < SBI. Activation of (SBI)ZrMe(2) by 1 in the presence of AlBu(i)(3) gives extremely active ethene polymerization catalysts. Polymerization studies at 1-7 bar monomer pressure suggest that these, and by implication most other highly active ethene polymerization catalysts, are strongly mass-transport limited. By contrast, monitoring propene polymerization activities with the systems (SBI)ZrMe(2)/1/AlBu(i)(3) and CGCTiMe(2)/1/AlBu(i)(3) at 20 degrees C as a function of catalyst concentration demonstrates that in these cases mass-transport limitation is absent up to [metal] approximately 2 x 10(-5) mol L(-1). Propene polymerization activities decrease in the order [CN[B(C(6)F(5))(3)](2)](-) > [B(C(6)F(5))(4)](-) > [M[CNB(C(6)F(5))(3)](4)](2-) > [MeB(C(6)F(5))(3)](-), with differences in activation barriers relative to [CN[B(C(6)F(5))(3)](2)](-) of DeltaDeltaG = 1.1 (B(C(6)F(5))(4)(-)), 4.1 (Ni[CNB(C(6)F(5))(3)](4)(2-)) and 10.7-12.8 kJ mol(-)(1) (MeB(C(6)F(5))(3)(-)). The data suggest that even in the case of very bulky anions with delocalized negative charge the displacement of the anion by the monomer must be involved in the rate-limiting step.     

Structures and reactivity of Zr(IV) chlorobenzene complexes

The synthesis, structures, and unusual reactivity of (C5R5)2ZrR'(ClPh)+ chlorobenzene complexes are described. The reaction of (C5R5)2ZrR'2 with [Ph3C][B(C6F5)4] in C6D5Cl affords [(C5R5)2ZrR'(ClC6D5)][B(C6F5)4] chlorobenzene complexes (1-d5, R' = CH2Ph and (C5R5)2 = (C5H5)2; 2a-d-d5, R' = Me and (C5R5)2 = rac-(1,2-ethylene(bis)indenyl) (2a), (C5H5)2 (2b), (C5H4Me)2 (2c), (C5Me5)2 (2d, C5Me5 = Cp*)). Complexes 1 and 2b,c are thermally robust but are converted to [{(C5R5)2Zr(mu-Cl)}2][B(C6F5)4]2 (4b,c) by a photochemical process in ClPh solution. In contrast, 2d undergoes facile thermal ortho-C-H activation to yield [Cp*2Zr(eta2-C,Cl-2-Cl-C6H4)][B(C6F5)4] (5), which slowly rearranges to [(eta4,eta1-C5Me5C6H4)Cp*ZrCl][B(C6F5)4] (6) via beta-Cl elimination and benzyne insertion into a Zr-CCp* bond. The higher thermal reactivity of 2d versus that of 1 and 2b,c is attributed to steric crowding associated with the Cp* ligands of 2d, which forces a ClPh ortho-hydrogen close to the Zr-Me group.     

Zirconium-catalyzed carboalumination of α-olefins and chain growth of aluminum alkyls: kinetics and mechanism

A mechanism based on Michaelis-Menten kinetics with competitive inhibition is proposed for both the Zr-catalyzed carboalumination of α-olefins and the Zr-catalyzed chain growth of aluminum alkyls from ethylene. AlMe(3) binds to the active catalyst in a rapidly maintained equilibrium to form a Zr/Al heterobimetallic, which inhibits polymerization and transfers chains from Zr to Al. The kinetics of both carboalumination and chain growth have been studied when catalyzed by [(EBI)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)]. In accord with the proposed mechanism, both reactions are first-order in [olefin] and [catalyst] and inverse first-order in [AlR(3)]. The position of the equilibria between various Zr/Al heterobimetallics and the corresponding zirconium methyl cations has been quantified by use of a Dixon plot, yielding K = 1.1(3) × 10(-4) M, 4.7(5) × 10(-4) M, and 7.6(7) × 10(-4) M at 40 °C in benzene for the catalyst species [rac-(EBI)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)], [Cp(2)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)], and [Me(2)C(Cp)(2)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)] respectively. These equilibrium constants are consistent with the solution behavior observed for the [Cp(2)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)] system, where all relevant species are observable by (1)H NMR. Alternative mechanisms for the Zr-catalyzed carboalumination of olefins involving singly bridged Zr/Al adducts have been discounted on the basis of kinetics and/or (1)H NMR EXSY experiments.     

Cationic hafnium silyl complexes and their enhanced reactivity in sigma-bond metathesis processes with Si-H and C-H bonds

Reaction of the mixed-ring silyl methyl complex CpCp*Hf[Si(SiMe3)3]Me (4) with B(C6F5)3 in bromobenzene-d5 yielded the zwitterionic hafnium silyl complex [CpCpHfSi(SiMe3)3][MeB(C6F5)3] (7), which is stable for at least 12 h in solution. Addition of PhSiH3 to 7 rapidly produced HSi(SiMe3)3, CpCp*HfH(mu-H)B(C6F5)3, and oligomeric silane products. Reactions of CpCp*Hf(SiR3)Me (SiR3 = SitBuPh2, SiHMes2) with B(C6F5)3 rapidly produced HSiR3 in quantitative yield along with unidentified hafnium-containing species. However, reactions of Cp2Hf(SiR3)Me (SiR3 = Si(SiMe3)3 (8), SitBuPh2 (9), SiPh3 (10)) with B(C6F5)3 quantitatively produced the corresponding cationic hafnium silyl complexes 12-14. The complex Cp2Hf(SitBuPh2)(mu-Me)B(C6F5)3 (13) was isolated by crystallization from toluene at -30 degrees C and fully characterized, and its spectroscopic properties and crystal structure are compared to those of its neutral precursor 9. The sigma-bond metathesis reaction of 13 with Mes2SiH2 yielded HSitBuPh2 and the reactive species Cp2Hf(eta(2)-SiHMes2)(mu-Me)B(C6F5)3 (16, benzene-d6), which was also generated by reaction of Cp2Hf(SiMes2H)Me (11) with B(C6F5)3. Spectroscopic data provide evidence for an unusual alpha-agostic Si-H interaction in 16. At room temperature, 16 reacts with benzene to form Cp2Hf(Ph)(mu-Me)B(C6F5)3 (17), and with toluene to give isomers of Cp2Hf(C6H4Me)(mu-Me)B(C6F5)3 (18-20) and Cp2Hf(CH2Ph)(mu-Me)B(C6F5)3 (21). The reaction with benzene is first order in both 16 and benzene. Kinetic data including activation parameters (deltaH = 19(1) kcal/mol; deltaS = -17(3) eu), a large primary isotope effect (kH/kD = 6.9(7)), and the experimentally determined rate law are consistent with a mechanism involving a concerted transition state for C-H bond activation.     

Chiral fluorous dialkoxy-diamino zirconium complexes: synthesis and use in stereospecific polymerization of 1-hexene

New catalysts for the isospecific polymerization of 1-hexene based on cationic zirconium complexes incorporating the tetradentate fluorous dialkoxy-diamino ligands [OC(CF(3))(2)CH(2)N(Me)(CH(2))(2)N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(2)NO)(2-)] and [OC(CF(3))(2)CH(2)N(Me)(1R,2R-C(6)H(10))N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(Cy)NO)(2-)] have been developed. The chiral fluorous diamino-diol [(ON(Cy)NO)H(2), 2] was prepared by ring-opening of the fluorinated oxirane (CF(3))(2)COCH(2) with (R,R)-N,N'-dimethyl-1,2-cyclohexanediamine. Proligand 2 reacts cleanly with [Zr(CH(2)Ph)(4)] and [Ti(OiPr)(4)] precursors to give the corresponding dialkoxy complexes [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3) and [Ti(OiPr)(2)(ON(Cy)NO)] (4), respectively. An X-ray diffraction study revealed that 3 crystallizes as a 1:1 mixture of two diastereomers (Lambda-3 and Delta-3), both of which adopt a distorted octahedral structure with trans-O, cis-N, and cis-CH(2)Ph ligands. The two diastereomers Lambda-3 and Delta-3 adopt a C(2)-symmetric structure in toluene solution, as established by NMR spectroscopy. Cationic complexes [Zr(CH(2)Ph)(ON(2)NO)(THF)(n)](+) (n=0, anion=[B(C(6)F(5))(4)](-), 5; n=1, anion=[PhCH(2)B(C(6)F(5))(3)](-), 6) and [Zr(CH(2)Ph)(ON(Cy)NO)(THF)](+)[PhCH(2)B(C(6)F(5))(3)](-) (7) were generated from the neutral parent precursors [Zr(CH(2)Ph)(2)(ON(2)NO)] (H) and [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3), and their possible structures were determined on the basis of (1)H, (19)F, and (13)C NMR spectroscopy and DFT methods. The neutral zirconium complexes H and 3 (Lambda-3/Delta-3 mixture), when activated with B(C(6)F(5))(3) or [Ph(3)C](+)[B(C(6)F(5))(4)](-), catalyze the polymerization of 1-hexene with overall activities of up to 4500 kg PH mol Zr(-1) h(-1), to yield isotactic-enriched (up to 74 % mmmm) polymers with low-to-moderate molecular weights (M(w)=4800-47 200) and monodisperse molecular-weight distributions (M(w)/M(n)=1.17-1.79).     

Catalytic P--H activation by Ti and Zr catalysts

Catalytic dehydrocoupling of phosphines was investigated using the anionic zirconocene trihydride salts [Cp*2Zr(mu-H)3Li]3 (1 a) or [Cp*2Zr(mu-H)3K(thf)4] (1 b), and the metallocycles [CpTi(NPtBu3)(CH2)4] (6) and [Cp*M(NPtBu3)(CH2)4] (M=Ti 20, Zr 21) as catalyst precursors. Dehydrocoupling of primary phosphines RPH2 (R=Ph, C6H2Me3, Cy, C10H7) gave both dehydrocoupled dimers RP(H)P(H)R or cyclic oligophosphines (RP)n (n=4, 5) while reaction of tBu3C6H2PH2 gave the phosphaindoline tBu2(Me2CCH2)C6H2PH 9. Stoichiometric reactions of these catalyst precursors with primary phosphines afforded [Cp*2Zr((PR)2)H][K(thf)4] (R=Ph 2, Cy 3, C6H2Me3 4), [Cp*2Zr((PPh)3)H][K(thf)4] (5), [CpTi(NPtBu3)(PPh)3] (7) and [CpTi(NPtBu3)(mu-PHPh)]2 (8), while reaction of 6 with (C6H2tBu3)PH2 in the presence of PMe3 afforded [CpTi(NPtBu3)(PMe3)(P(C6H2tBu3)] (10). The secondary phosphines Ph2PH and (PhHPCH2)2CH2 also undergo dehydrocoupling affording (Ph2P)2 and (PhPCH2)2CH2. The bisphosphines (CH2PH2)2 and C6H4(PH2)2 are dehydrocoupled to give (PCH2CH2PH)2)(12) and (C6H4P(PH))2 (13) while prolonged reaction of 13 gave (C6H4P2)(8) (14). The analogous bisphosphine Me2C6H4(PH)2 (17) was prepared and dehydrocoupling catalysis afforded (Me2C6H2P(PH))2 (18) and subsequently [(Me2C6H2P2)2(mu-Me2C6H2P2)]2 (19). Stoichiometric reactions with these bisphosphines gave [Cp*2Zr(H)(PH)2C6-H4][Li(thf)4] (22), [CpTi(NPtBu3)(PH)2C6H4]2 (23) and [Cp*Ti(NPtBu3)(PH)2C6H4] (24). Mechanistic implications are discussed.     

Bimetallic effects in homopolymerization of styrene and copolymerization of ethylene and styrenic comonomers: scope, kinetics, and mechanism

This contribution describes the homopolymerization of styrene and the copolymerization of ethylene and styrenic comonomers mediated by the single-site bimetallic "constrained geometry catalysts" (CGCs), (mu-CH2CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)](TiMe2)}2 [EBICGC(TiMe2)2; Ti2], (mu-CH2CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)](ZrMe2)}2 [EBICGC(ZrMe2)2; Zr2], (mu-CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)](TiMe2)}2 [MBICGC(TiMe2)2; C1-Ti2], and (mu-CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)](ZrMe2)}2 [MBICGC(ZrMe2)2; C1-Zr2], in combination with the borate activator/cocatalyst Ph3C+ B(C6F5)4- (B1). Under identical styrene homopolymerization conditions, C1-Ti2 + B1 and Ti2 + B1 exhibit approximately 65 and approximately 35 times greater polymerization activities, respectively, than does monometallic [1-Me2Si(3-ethylindenyl)(tBuN)]TiMe2 (Ti1) + B1. C1-Zr2 + B1 and Zr2 + B1 exhibit approximately 8 and approximately 4 times greater polymerization activities, respectively, than does the monometallic control [1-Me2Si(3-ethylindenyl)(tBuN)]ZrMe2 (Zr1) + B1. NMR analyses show that the bimetallic catalysts suppress the regiochemical insertion selectivity exhibited by the monometallic analogues. In ethylene copolymerization, Ti2 + B1 enchains 15.4% more styrene (B), 28.9% more 4-methylstyrene (C), 45.4% more 4-fluorostyrene (D), 41.2% more 4-chlorostyrene (E), and 31.0% more 4-bromostyrene (F) than does Ti1 + B1. This observed bimetallic chemoselectivity effect follows the same general trend as the pi-electron density on the styrenic ipso carbon (D > E > F > C > B). Kinetic studies reveal that both Ti2 + B1 and Ti1 + B1-mediated ethylene-styrene copolymerizations follow second-order Markovian statistics and tend to be alternating. Moreover, calculated reactivity ratios indicate that Ti2 + B1 favors styrene insertion more than does Ti1 + B1. All the organozirconium complexes (C1-Zr2, Zr2, and Zr1) are found to be incompetent for ethylene-styrene copolymerization, yielding only mixtures of polyethylene and polystyrene. Model compound (mu-CH2CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)][Ti(CH2Ph)2]}2 {EBICGC[Ti(CH2Ph)2]2; Ti2(CH2Ph)4} was designed, synthesized, and structurally characterized. In situ activation studies with cocatalyst B(C6F5)3 suggest an eta(1)-coordination mode for the benzyl groups, thus supporting the proposed polymerization mechanism. For ethylene-styrene copolymerization, polar solvents are found to increase copolymerization activities and coproduce atactic polystyrene impurities in addition to ethylene-co-styrene, without diminishing the comonomer incorporation selectivity. Both homopolymerization and copolymerization results argue that substantial cooperative effects between catalytic sites are operative.     

Cationic benzyl zirconium heteroscorpionates: synthesis and characterization of a novel ethylene polymerisation catalyst showing an unusual temperature dependent polymerisation mechanism

The reaction of (bpzmp)Zr(CH2Ph)3 with B(C6F5)3 produces the active ethylene polymerisation catalyst [(bpzmp)Zr(CH2Ph)2]+[PhCH2B(C6F5)3]- which showed a temperature dependent polymerisation mechanism identified by variable temperature 1H NMR analysis of the catalyst solution.     

Activation of arene C[bond]H bonds by a cationic hafnium silyl complex possessing an alpha-agostic Si[bond]H interaction

The reaction of Cp2Hf(SiMes2H)Me (1) with B(C6F5)3 produces zwitterionic Cp2Hf(eta2-SiHMes2)(mu-Me)B(C6F5)3 (2), which is stable for >8 h at -40 degrees C in toluene-d8. Spectroscopic data provide evidence for an unusual alpha-agostic Si-H interaction in 2. At room temperature, 2 reacts with the C-H bonds of aromatic hydrocarbons such as benzene and toluene to produce Cp2Hf(Ph)(mu-Me)B(C6F5)3 (3), isomers of Cp2Hf(C6H4Me)(mu-Me)B(C6F5)3 (4-6), and Cp2Hf(CH2Ph)(mu-Me)B(C6F5)3 (7), respectively. The reaction involving benzene is first-order in both 2 and benzene; rate = k[2][C6H6]. Mechanistic data including activation parameters (DeltaH = 19(1) kcal/mol; DeltaS = -17(3) eu), a large primary isotope effect of 6.9(7), and the experimentally determined rate law are consistent with a mechanism involving a concerted transition state for C-H bond activation.     

Synthesis and reactivity of cationic niobium and tantalum methyl complexes supported by imido and β-diketiminato ligands

The synthesis and reactivity of the cationic niobium and tantalum monomethyl complexes [(BDI)MeM(N(t)Bu)][X] (BDI = [Ar]NC(CH(3))CHC(CH(3))N[Ar], Ar = 2,6-(i)Pr(2)C(6)H(3); M = Nb, Ta; X = MeB(C(6)F(5))(3), B(C(6)F(5))(4)] was investigated. The cationic alkyl complexes failed to irreversibly bind CO but formed phosphine-trapped acyl complexes [(BDI)(R(3)PC(O)Me)M(N(t)Bu)][B(C(6)F(5))(4)] (R = Et, Cy) in the presence of a combination of trialkylphosphines and CO. Treatment of the monoalkyl cationic Nb complex with XylNC (Xyl = 2,6-Me(2)-C(6)H(3)) resulted in irreversible formation of the iminoacyl complex [(BDI)(XylN[double bond, length as m-dash]C(Me))Nb(N(t)Bu)][B(C(6)F(5))(4)], which did not bind phosphines but would add a methide group to the iminoacyl carbon to provide the known ketimine complex (BDI)(XylNCMe(2))Nb(N(t)Bu). Further stoichiometric chemistry explored i) migratory insertion reactions to form new alkoxide, amidinate, and ketimide complexes; ii) protonolysis reactions with Ph(3)SiOH to form thermally robust cationic siloxide complexes; and iii) catalytic high-density polyethylene formation mediated by the cationic Nb methyl complex.     

Cleavage of hydrazine N-N bonds by RuMo3S4 cubane-type clusters

The mixed-metal cubane-type clusters [(Cp*Mo)3(mu3-S)4RuH2(PR3)][PF(6)] [Cp* = eta5-C5Me5; R = Ph (2), Cy (5)] were effective for the N-N bond cleavage of hydrazine and phenylhydrazine via a disproportionation reaction. The ammonia cluster [(C*Mo)3(mu3-S)4Ru(NH3)(PPh3)][PF6] (3) and/or the unprecedented double-cubane-type cluster with bridging nitrogenous ligands [{(Cp*Mo)3(mu3-S)4Ru}2(mu2-NH2)(mu2-NHNH2)][PF6]2 (4) were isolated from the reaction mixtures, and their structures were determined by X-ray diffraction studies.     

Tuning the coordination geometry of silver in bis(pyrazolyl)alkane complexes

Silver(I) complexes of the bis(pyrazolyl)methane ligands Ph(2)C(pz)(2), PhCH(pz)(2), and PhCH(2)CH(pz)(2) (pz = pyrazolyl ring) have been prepared in an attempt to explore how sterically hindered poly(pyrazolyl)methane ligands influence the variable coordination geometries exhibited by silver(I) complexes, especially its ability to participate in cation...pi interactions. The complex (Ag[(pz)(2)CPh(2)](2))(PF(6)).C(3)H(6)O adopts an unusual square planar coordination environment as indicated by the sum of the four N-Ag-N angles being 360 degrees. The proximity of phenyl groups above and below the AgN(4) core enforces the unusual coordination geometry about the metal center. This arrangement is not a result of silver(I)...pi arene interactions but rather of the constraints imposed by the steric crowding caused by (aryl)(2)C(pz)(2) ligands. In contrast, the complexes of the other two ligands, (Ag[(pz)(2)CHPh](2))(PF(6)).0.5CH(2)Cl(2) and (Ag[(pz)(2)CH(CH(2)Ph)](2))(PF(6)).CH(2)Cl(2), show normal tetrahedral geometry about the silver(I), also with no indication of silver(I)...pi arene interactions. All three new complexes have extended supramolecular structures supported by a combination of CH...pi and CH...F interactions.     

Tris(pyrazolyl)borate amidoborane complexes of the group 4 metals

Treatment of the tris(pyrazolyl)borate metal triamides Tp'M(NMe(2))(3), where Tp' = (C(3)H(3)N(2))(3)BH (Tp) or (3,5-Me(2)C(3)HN(2))(3)BH (Tp*) and M = Ti, Zr and Hf, with the Br?nsted acidic Lewis adduct (C(6)F(5))(3)B·NH(3) in toluene solution leads to the formation of Tp'M(NMe(2))(2){NH(2)B(C(6)F(5))(3)} complexes. The exception to this was the attempted preparation of Tp*Ti(NMe(2))(2){NH(2)B(C(6)F(5))(3)} which was unsuccessful. Where Tp' = Tp and M = Ti and Zr and where Tp' = Tp* and M = Zr the complexes have been characterized by single crystal X-ray diffraction methods, revealing the first examples of octahedral amidoborane complexes of the group 4 metals. Attempts to drive the reactions to completion resulted in competing preferential hydrolysis of the amidoborane group, regenerating (C(6)F(5))(3)B·NH(3).     

Syntheses of Cationic, Six-Coordinate Cadmium(II) Complexes Containing Tris(pyrazolyl)methane Ligands. Influence of Charge on Cadmium-113 NMR Chemical Shifts

Treating a thf (thf = tetrahydrofuran) suspension of Cd(acac)(2) (acac = acetylacetonate) with 2 equiv of HBF(4).Et(2)O results in the immediate formation of [Cd(2)(thf)(5)](BF(4))(4) (1). Crystallization of this complex from thf/CH(2)Cl(2) yields [Cd(thf)(4)](BF(4))(2) (2), a complex characterized in the solid state by X-ray crystallography. Crystal data: monoclinic, P2(1)/n, a = 7.784(2) ?, b = 10.408(2) ?, c = 14.632(7) ?, beta = 94.64(3) degrees, V = 1181.5(6) ?(3), Z = 2, R = 0.0484. The geometry about the cadmium is octahedral with a square planar arrangement of the thf ligands and a fluorine from each (BF(4))(-) occupying the remaining two octahedral sites. Reactions of [Cd(2)(thf)(5)](BF(4))(4) with either HC(3,5-Me(2)pz)(3) or HC(3-Phpz)(3) yield the dicationic, homoleptic compounds {[HC(3,5-Me(2)pz)(3)](2)Cd}(BF(4))(2) (3) and {[HC(3-Phpz)(3)](2)Cd}(BF(4))(2) (4) (pz = 1-pyrazolyl). The solid state structure of 3 has been determined by X-ray crystallography. Crystal data: rhombohedral, R&thremacr;, a = 12.236(8) ?, c = 22.69(3) ?, V = 2924(4) ?(3), Z = 3, R = 0.0548. The cadmium is bonded to the six nitrogen donor atoms in a trigonally distorted octahedral arrangement. Four monocationic, mixed ligand tris(pyrazolyl)methane-tris(pyrazolyl)borate complexes {[HC(3,5-Me(2)pz)(3)][HB(3,5-Me(2)pz)(3)]Cd}(BF(4)) (5), {[HC(3,5-Me(2)pz)(3)][HB(3-Phpz)(3)]Cd}(BF(4)) (6), {[HC(3-Phpz)(3)][HB(3,5-Me(2)pz)(3)]Cd}(BF(4)) (7), and {[HC(3-Phpz)(3)][HB(3-Phpz)(3)]Cd}(BF(4)) (8) are prepared by appropriate conproportionation reactions of 3or 4 with equimolar amounts of the appropriate homoleptic neutral tris(pyrazolyl)borate complexes [HB(3,5-Me(2)pz)(3)](2)Cd or [HB(3-Phpz)(3)](2)Cd. Solution (113)Cd NMR studies on complexes 3-8 demonstrate that the chemical shifts of the new cationic, tris(pyrazolyl)methane complexes are very similar to the neutral tris(pyrazolyl)borate complexes that contain similar substitution of the pyrazolyl rings.     

Coordination chemistry of novel scorpionate ligands based on 3-cyclohexylpyrazole and 3-cyclohexyl-4-bromopyrazole

The ligands [hydrotris(3-cyclohexylpyrazol-1-yl)borate, [Tp(Cy)](-), tetrakis(3-cyclohexylpyrazol-1-yl)borate, [pz(o)Tp(Cy)](-), and hydrotris(3-cyclohexyl-4-bromopyrazol-1-yl)borate, [Tp(Cy,4Br)](-) were synthesized and characterized as their Tl(I) derivatives. They were converted to a variety of tetrahedral LMX and octahedral LML' complexes, as well as to the dinuclear nickel carbonate complex [Ni(Tp(Cy))](2)(CO(3)), 4, and the compound Ni[Tp(Cy,4Br)][pz(Cy,4Br)](3)(H)(2), 5. The structures of Co[Tp(Cy)]Cl, 1, Co[Tp(Cy,4Br)]Cl, 2, Co[Tp(Cy,4Br)]NCS, 3, [Ni(Tp(Cy))](2)(CO(3)), 4, Ni[Tp(Cy,4Br)][pz(Cy,4Br)](3)(H)(2), 5, and Mo[Tp(Cy)](CO)(2)(eta(3)-methallyl), 6, were determined by X-ray crystallography. The structures of paramagnetic heteroleptic complexes Co[Tp(Cy)][Tp], Co[Tp(Cy)][Tp], Co[Tp(Cy,4Br)][Tp], and Co[Tp(Cy,4Br)][Tp] were established by NMR. The homoleptic compounds Co[Tp(Cy)](2) and Co[Tp(Cy,4Br)](2) rearrange thermally to Co[Tp(Cy)](2) and to Co[Tp((Cy,4Br))](2), respectively, containing one 5-cyclohexyl group/ligand.     

Catalyst/cocatalyst nuclearity effects in single-site polymerization. Enhanced polyethylene branching and alpha-olefin comonomer enchainment in polymerizations mediated by binuclear catalysts and cocatalysts via a new enchainment pathway

The binuclear "constrained geometry catalyst" (CGC) (mu-CH2CH2-3,3'){(eta5-indenyl )[1-Me2Si(tBuN)](ZrMe2)}2 [EBICGC(ZrMe2)2; Zr2] and the trityl bisborate dianion (Ph3C+)2[1,4-(C6F5)3BC6F4B(C6F5)3]2- (B2) have been synthesized to serve as new types of multicenter homogeneous olefin polymerization catalysts and cocatalysts, respectively. Additionally, the complex [1-Me2Si(3-ethylindenyl)(tBuN)]ZrMe2 (Zr1) was synthesized as a mononuclear control. For the bimetallic catalyst or bisborate cocatalyst, high effective local active site concentrations and catalyst center-catalyst center cooperative effects are evidenced by bringing the catalytic centers together via either covalent or electrostatic bonding. For ethylene homopolymerization at constant conversion, the branch content of the polyolefin products (primarily ethyl branches) is dramatically increased as catalyst or cocatalyst nuclearity is increased. Moreover, catalyst and cocatalyst nuclearity effects are approximately additive. Compared to the catalyst derived from monometallic Zr1 and monofunctional Ph3C+B(C6F5)4- (B1), the active catalyst derived from bimetallic Zr2 and bifunctional B2 produces approximately 11 times more ethyl branches in ethylene homopolymerization via a process which is predominantly intradimer in character. Moreover, approximately 3 times more 1-hexene incorporation in ethylene + 1-hexene copolymerization and approximately 4 times more 1-pentene incorporation in ethylene + 1-pentene copolymerization are observed for Zr2 + B2 versus Zr1 + B1.     

Novel micro3-oxo complexes prepared from Cp*Zr(B(3R)3 (R = H, CH3) and B(C6F5)3 in diethyl ether

From the reactions of Cp*ZrCl(3) with 3 equiv. of LiBH(3)R (R = CH(3), Ph), the organotrihydroborate complexes, Cp*Zr(BH(3)CH(3))(3), 1, and Cp*Zr(BH(3)Ph)(3), 2, were isolated. One of the Zr-H-B bonding interactions in 2 could be described as an intermediate case between the bidentate and tridentate modes. Reactions of and Cp*Zr(BH(4))(3), 3, with Lewis acid B(C(6)F(5))(3) in diethyl ether produced the novel 14-electron ionic compounds [(micro(3)-O)(micro(2)-OC(2)H(5))(3){(Cp*Zr(OC(2)H(5)))(2)(BCH(3))}][HB(C(6)F(5))(3)], 4, and [(micro(3)-O)(micro(2)-OC(2)H(5))(3){(Cp*Zr(OC(2)H(5)))(2)(BOC(2)H(5))}][HB(C(6)F(5))(3)], 5, respectively. These two unique compounds resulted from a sequential cleavage of Zr-H-B bonds of 1 and 3 and C-O bonds of ether followed by the formation of O-B bonds. The solid state single crystal X-ray analyses revealed that both compounds have similar structures. A micro(3)-oxygen bridges two zirconiums and a boron atom. The latter three atoms are further connected by three micro(2)-bridging ethoxy groups giving rise to three four-membered metallacycles within the structure of each cation.     

Synthesis, structural characterization, reactivity, and thermal stability of [eta(5):sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2)

Reaction of [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]TiCl(NMe2) (1) with 1 equiv of PhCH2K, MeMgBr, or Me3SiCH2Li gave corresponding organotitanium alkyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2) (R = CH2Ph (2), CH2SiMe3 (4), or Me (5)) in good yields. Treatment of 1 with 1 equiv of n-BuLi afforded the decomposition product {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe)(mu:sigma-CH2NMe) (3). Complex 5 slowly decomposed to generate a mixed-valence dinuclear species {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe2)(mu:sigma-CH2NMe) (6). Complex 1 reacted with 1 equiv of PhNCO or 2,6-Me2C6H3NC to afford the corresponding monoinsertion product [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-OC(NMe2)NPh] (7) or [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-C(NMe2)=N(2,6-Me2C6H3)] (8). Reaction of 4 or 5 with 1 equiv of R'NC gave the titanium eta(2)-iminoacyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(NMe2)[eta(2)-C(R)=N(R')] (R = CH2SiMe3, R' = 2,6-Me2C6H3 (9) or tBu (10); R = Me, R' = 2,6-Me2C6H3 (11) or tBu (12)). The results indicated that the unsaturated molecules inserted into the Ti-N bond only in the absence of the Ti-C(alkyl) bond and that the Ti-C(cage) bond remained intact. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Molecular structures of 2, 3, 6-8, and 10-12 were further confirmed by single-crystal X-ray analyses.     

Alkyne and alkene complexes of a d(0) zirconocene aryl cation

The generation and properties of nonchelated Zr-aryl-alkyne and Zr-aryl-alkene complexes that are stabilized by the presence of beta-Si-substituents in the alkyne and alkene ligands and fluorination of the aryl ligand are described. Reaction of [Cp'2Zr(OtBu)(ClCD2Cl)][B(C6F5)4] (1, Cp' = C5H4Me) with alkyne and alkene substrates (L) generates Cp'2Zr(OtBu)(L)+ adducts (L = HCCCH2SiMe3 (2); H2C=CHCH2SiMe3 (3); HCCMe (4); H2C=CHCH2CMe3 (5)). Equilibrium constants for substrate binding (Keq = [Zr-L][1]-1[L]-1; CD2Cl2, -89 degrees C) are much larger for the beta-Si-substituted compounds 2 (1.0(2) x 105 M-1) and 3 (1.7(4) x 103 M-1) than for hydrocarbon analogues 4 (3.6(7) x 102 M-1) and 5 (1.9(1) M-1), which is ascribed to beta-Si stabilization of the partial positive charge on Cint of the bound substrate. [Cp2Zr(C6F5)][B(C6F5)4] (7, Cp = C5H5) was generated by the reaction of Cp2Zr(C6F5)Me with [Ph3C][B(C6F5)4] in C6D5Cl. Reaction of 7 with alkyne and alkene substrates (L) generates Cp2Zr(C6F5)(L)+ adducts (L = HCCCH2SiMe3 (8); H2C=CHCH2SiMe3 (10)). No insertion of the substrate into the Zr-C6F5 bond is observed in 8 (at -38 degrees C) or 10 (up to 22 degrees C). The allyltrimethylsilane ligand in 10 undergoes nondissociative alkene face exchange ("alkene flipping", i.e., exchange of the Cp2Zr(C6F5)+ unit between the two alkene enantiofaces without alkene dissociation), with a first-order rate constant kflip = 23(1) s-1 (C6D5Cl, -38 degrees C). 10 also undergoes slower reversible decomplexation of the alkene (kdissoc = 5.0(8) s-1; C6D5Cl, -38 degrees C).     

The uranium-nitrogen bond in U IV complexes supported by the hydrotris(3,5-dimethylpyrazolyl)borate ligand

Insertion of benzonitrile and acetonitrile into the U-C bond of [U(Tp(Me2))Cl(2)(CH(2)SiMe(3))](Tp(Me2)= HB(3,5-Me(2)pz)(3)) gives the ketimide complexes [U(Tp(Me2))Cl(2){NC(R)(CH(2)SiMe(3))}](R = Ph (1); Me (2)). The identity of complex was ascertained by a single-crystal X-ray diffraction study. In the solid state exhibits octahedral geometry with a short U-N bond length to the ketimide ligand. We also report herein the synthesis and the X-ray crystal structures of the uranium amide complexes [U(Tp(Me2))Cl(2)(NR(2))](R = Et (3); Ph (4)). A detailed comparison of the U-N bond lengths in these compounds with other known U-N (and Th-N) distances in amide and ketimide actinide(IV) complexes is performed, confirming the short character of the U-N bond length in 1.