Protein adhesion on silicon-supported hyperbranched poly(ethylene glycol) and poly(allylamine) thin films

Hyperbranching poly(allylamine) (PAAm) and poly(ethylene glycol) (PEG) on silicon and its effect on protein adhesion was investigated. Hyperbranching involves sequential grafting of polymers on a surface with one of the components having multiple reactive sites. In this research, PAAm provided multiple amines for grafting PEG diacrylate. Current methodologies for generating PEG surfaces include PEG-silane monolayers or polymerized PEG networks. Hyperbranching combines the nanoscale thickness of monolayers with the surface coverage afforded by polymerization. A multistep approach was used to generate the silicon-supported hyperbranched polymers. The silicon wafer surface was initially modified with a vinyl silane followed by oxidation of the terminal vinyl group to present an acid function. Carbodiimide activation of the surface carboxyl group allowed for coupling to PAAm amines to form the first polymer layer. The polymers were hyperbranched by grafting alternating PEG and PAAm layers to the surface using Michael addition chemistry. The alternating polymers were grafted up to six total layers. The substrates remained hydrophilic after each modification. Static contact angles for PAAm (32-44 degrees) and PEG (33-37 degrees) were characteristic of the corresponding individual polymer (30-50 degrees for allylamine, 34-42 degrees for PEG). Roughness values varied from approximately 1 to 8 nm, but had no apparent affect on protein adhesion. Modifications terminating with a PEG layer reduced bovine serum albumin adhesion to the surface by approximately 80% as determined by ELISA and radiolabel binding studies. The hyperbranched PAAm and PEG surfaces described in this paper are nanometer-scale, multilayer films capable of reducing protein adhesion.     

In vitro stability study of organosilane self-assemble monolayers and multilayers

The stability of self-assembled monolayers (SAMs) and multilayers formed on silicon surface by amino-terminated silanes and SAMs formed by alkyl and glycidyl terminated silanes were investigated in vitro with saline solution at 37 degrees C for up to 10 days. FTIR and XPS results indicated that amino-terminated SAMs and multilayers are very unstable if the alkyl chain is short ((CH2)3), while stable if the alkyl chain is long ((CH2)11). On the other hand, alkyl-terminated SAMs are very stable regardless of the alkyl chain length, and glycidyl terminated SAM retained approximately 77% of the organosilane molecules after 10 days. Hydrogen bonding between the organosilane monomer and silicon surface and among the organosilane monomers is believed to contribute to the instability of the SAM and multilayer formed by amino-terminated silane with a short alkyl chain ((CH2)3). Therefore, the widely used (3-aminopropyl) trimethoxysilane (APTMS) SAM and multilayer may not be suitable for implantable biomedical applications.     

A versatile synthetic strategy for nanoporous gold–organic hybrid materials for electrochemistry and photocatalysis

Nanoporous gold (npAu) was employed as high surface area substrate for immobilization of redox- and photooxidative-active organic molecules. A two-step synthetic routine is demonstrated as a versatile and robust method for immobilization of various molecules. First, self-assembled monolayers (SAMs) of thiols containing an azide moiety were prepared on npAu substrates. Then, alkyne-modified ferrocene, tetrathiafulvalene, and zinc(II)phthalocyanine derivatives were covalently bound via the click reaction to this linker. Following the provided synthetic procedures high performance composite materials are generated for electrochemistry and photochemistry. The robust bonding between the organic functional group and the gold support provides stability even under strongly oxidizing conditions (applied potential or singlet oxygen).     

Packing density and structure effects on energy-transfer dynamics in argon collisions with organic monolayers

A combined experimental and molecular-dynamics simulation study has been used to investigate energy-transfer dynamics of argon atoms when they collide with n-alkanethiols adsorbed to gold and silver substrates. These surfaces provide the opportunity to explore how surface structure and packing density of alkane chains affect energy transfer in gas-surface collisions while maintaining the chemical nature of the surface. The chains pack standing up with 12 degrees and 30 degrees tilt angles relative to the surface normal and number densities of 18.9 and 21.5 A(2)molecule on the silver and gold substrates, respectively. For 7-kJmol argon scattering, the two surfaces behave equivalently, fully thermalizing all impinging argon atoms. In contrast, these self-assembled monolayers (SAMs) are not equally efficient at absorbing the excess translational energy from high-energy, 35 and 80 kJmol, argon collisions. When high-energy argon atoms are scattered from a SAM on silver, the fraction of atoms that reach thermal equilibrium with the surface and the average energy transferred to the surface are lower than for analogous SAMs on gold. In the case of argon atoms with 80 kJmol of translational energy scattering from long-chain SAMs, 60% and 45% of the atoms detected have reached thermal equilibrium with the monolayers on gold and silver surfaces, respectively. The differences in the scattering characteristics are attributed to excitation efficiencies of different types of surface modes. The high packing density of alkyl chains on silver restricts certain low-energy degrees of freedom from absorbing energy as efficiently as the lower-density monolayers. In addition, molecular-dynamics simulations reveal that the extent to which argon penetrates into the monolayer is related to packing density. For argon atoms with 80-kJmol incident energy, we find 16% and 7% of the atoms penetrate below the terminal methyl groups of C(10) SAMs on gold and silver, respectively.     

New dialkyldithiophosphinic acid self-assembled monolayers (SAMs): influence of gold substrate morphology on adsorbate binding and SAM structure

We report the fabrication and characterization of new self-assembled monolayers (SAMs) formed from dihexadecyldithiophosphinic acid [(C(16))(2)DTPA] molecules on gold substrates. In these SAMs, the ability of the (C(16))(2)DTPA headgroup to chelate to the gold surface depends on the morphology of the gold substrate. Gold substrates fabricated by electron-beam evaporation (As-Dep gold) consist of ～50-nm grains separated by deep grain boundaries (～10 nm). These grain boundaries inhibit the chelation of (C(16))(2)DTPA adsorbates to the surface, producing SAMs in which there is a mixture of monodentate and bidentate adsorbates. In contrast, gold substrates produced by template stripping (TS gold) consist of larger grains (～200-500 nm) with shallower grain boundaries (<2 nm). On these substrates, the low density of shallow grain boundaries allows (C(16))(2)DTPA molecules to chelate to the surface, producing SAMs in which all molecules are bidentate. The content of bidentate adsorbates in (C(16))(2)DTPA SAMs formed on As-Dep and TS gold substrates strongly affects the SAM properties: Alkyl chain organization, wettability, frictional response, barrier properties, thickness, and thermal stability all depend on whether a SAM has been formed on As-Dep or TS gold. This study demonstrates that substrate morphology has an important influence on the structure of SAMs formed from these chelating adsorbates.     

Reversible covalent patterning of self-assembled monolayers on gold and silicon oxide surfaces

This paper describes the generation of reversible patterns of self-assembled monolayers (SAMs) on gold and silicon oxide surfaces via the formation of reversible covalent bonds. The reactions of (patterned) SAMs of 11-amino-1-undecanethiol (11-AUT) with propanal, pentanal, decanal, or terephthaldialdehyde result in dense imine monolayers. The regeneration of these imine monolayers to the 11-AUT monolayer is obtained by hydrolysis at pH 3. The (patterned) monolayers were characterized by Fourier transform infrared reflection absorption spectroscopy, X-ray photoelectron spectroscopy, contact angle and electrochemical measurements, and atomic force microscopy. Imines can also be formed by microcontact printing of amines on terephthaldialdehyde-terminated substrates. Lucifer Yellow ethylenediamine was employed as a fluorescent amine-containing marker to visualize the reversible covalent patterning on a terephthaldialdehyde-terminated glass surface by confocal microscopy. These experiments demonstrate that with reversible covalent chemistry it is possible to print and erase chemical patterns on surfaces repeatedly.     

In situ spectroscopic characterization of rectifying molecular monolayers self-assembled on gold.

We report visible, Raman, and infrared spectra of self-assembled monolayers (SAMs) formed by the donor-(pi-bridge)-acceptor chromophore, Z-beta-[N-(omega-acetylthioalkyl)-4-quinolinium]-alpha-cyano-4-styryldicyanomethanide (CH3CO-S-CnH2n-Q3CNQ where n=8, 10), on gold-coated substrates. The data are compared with the spectra collected for the same compound in solution and in the solid state, and with those obtained for a Langmuir-Blodgett (LB) monolayer of C16H33-Q3CNQ deposited on gold. Spectral analysis confirms that in solution, in the solid state and in the LB film the chromophore has a zwitterionic (D+-pi-A-) ground state. At variance with this well-known result, our data show that in SAMs deposited on gold the chromophore has a more neutral, quinoid ground state. We relate this difference to the different packing of the molecules in the two different films: in SAMs in fact the chromophores stand almost vertical with respect to the substrate, whereas in LB films they make an angle of about 45 degrees. The Q3CNQ molecule is a well-known molecular rectifier, and for SAMs we were able to check the direction of electron flow at forward bias on the same samples that have been characterized spectroscopically, shedding light on the rectification mechanism.     

In situ deprotection and assembly of s-tritylalkanethiols on gold yields monolayers comparable to those prepared directly from alkanethiols

In this paper we describe a systematic study comparing the properties of self-assembled monolayers (SAMs) formed by in situ deprotection and assembly of S-triphenylmethyl (trityl)- and thiolacetate-protected alkanethiols to those of SAMs formed from the parent alkanethiols. The two in situ deprotections were carried out in trifluoroacetic acid and THF/ammonium hydroxide, respectively. Monolayers of octadecanethiol (ODT) and the peptide-containing alkanethiol 3-mercapto-N-n-pentadecylpropionamide (1ATC15) were assembled on gold using the two in situ methods and characterized by contact angle goniometry, X-ray photoelectron spectroscopy, polarization modulation infrared reflection absorption spectroscopy, and electrochemical characterization methods to assess how the monolayer properties compare to those of monolayers prepared by traditional methods. The results for the in situ deprotection of the trityl-protected molecules demonstrate that this method can afford high-quality monolayers that are nearly indistinguishable from those prepared directly from alkanethiols. The quality of the monolayers prepared using this method is shown to depend on the solubility of the trityl-protected compound in trifluoroacetic acid. The results for the in situ deprotection of acetyl-ODT indicate this method yields low-quality monolayers that contain mixtures of adsorbates bound as thiolates and thiolacetates. In situ trityl deprotection is a useful approach for monolayer formation that greatly simplifies the purification, handling, and assembly of thiol-containing monolayer precursors.     

Effect of surface chemical composition on the surface potential and iso-electric point of silicon substrates modified with self-assembled monolayers

Self-assembled monolayer (SAM)-modified nano-materials are a new technology to deliver drug molecules. While the majority of these depend on covalently immobilizing molecules on the surface, it is proposed that electrostatic interactions may be used to deliver drugs. By tuning the surface potential of solid substrates with SAMs, drug molecules could be either absorbed on or desorbed from substrates through the difference in electrostatic interactions around the selected iso-electric point (IEP). In this work, the surface of silicon substrates was tailored with various ratios of 3-aminopropyltrimethoxysilane (APTMS) and 3-mercaptopropyltrimethoxysilane (MPTMS), which form amine- and thiol-bearing SAMs, respectively. The ratio of the functional groups on the silicon surface was quantified by X-ray photoelectron spectrometry (XPS); in general, the deposition kinetics of APTMS were found to be faster than those of MPTMS. Furthermore, for solutions with high MPTMS concentrations, the relative deposition rate of APTMS increased dramatically due to the acid-base reaction in the solution and subsequent electrostatic interactions between the molecules and the substrate. The zeta potential in aqueous electrolytes was determined with an electro-kinetic analyzer. By depositing SAMs of binary functional groups in varied ratios, the surface potential and IEP of silicon substrates could be fine-tuned. For <50% amine concentration in SAMs, the IEP changed linearly with the chemical composition from <2 to 7.18. For higher amine concentrations, the IEP slowly increased with concentration to 7.94 because the formation of hydrogen-bonding suppressed the subsequent protonation of amines.     

Dense passivating poly(ethylene glycol) films on indium tin oxide substrates

We describe the formation and characterization of surface-passivating poly(ethylene glycol) (PEG) films on indium tin oxide (ITO) glass substrates. PEG chains with a molecular weight of 2000 and 5000 D were covalently attached to the substrates in a systematic approach using different coupling schemes. The coupling strategies included the direct grafting with PEG-silane, PEG-methacrylate, and PEG-bis(amine), as well as the two-step functionalization with aldehyde-bearing silane films and subsequent coupling with PEG-bis(amine). Elemental analysis by X-ray photoelectron spectroscopy (XPS) confirmed the successful surface modification, and XPS and ellipsometry provided values for film thicknesses. XPS and ellipsometry thickness values were almost identical for PEG-silane films but differed by up to 400% for the other PEG layers, suggesting a homogeneous layer for PEG-silane but an inhomogeneous distribution for other PEG coatings on the molecularly rough ITO substrates. Atomic force microscopy (AFM) and water contact angle goniometry confirmed the different degrees of surface homogeneity of the polymer films, with PEG-silane reducing the AFM rms surface roughness by 50% and the water contact angle hysteresis by 75% compared to uncoated ITO. The ability of the PEG layers to passivate the substrate against the nonspecific adsorption of biopolymers was tested using fluorescence-labeled immunoglobulin G and DNA oligonucleotides in combination with fluorescence microscopy. The results indicate a positive relationship between film density and homogeneity on one hand and the ability to passivate against biopolymer adhesion on the other hand. The most homogeneous layers prepared with PEG-silane reduced the nonspecific adsorption of fluorescence-labeled DNA by a factor of 300 compared to uncoated ITO. In addition, the study finds that the ratio of film thicknesses derived by ellipsometry and XPS is a useful parameter to quantify the structural integrity of PEG layers on molecularly rough ITO surfaces. The findings may be applied to characterize PEG or other polymeric films on similarly coarse substrates.     

Structural Investigation of Langmuir-Blodgett Films on Self-Assembly Modified Au Substrates

To improve the homogeneity and stability of single-layer azobenzene LB films on gold, self-assembled monolayers (SAMs) of terminally substituted alkyl thiol, HS(CH₂)₂-X(X=NH2,OH, COOH and CH₂SO₃Na, respectively), were used to modify the substrates before LB film deposition. It was found that single-layer C₈C₃ LB films on these modified substrates were more uniform and stable. Reflecion-Absorption(RA) FTIR measurements on these films indicated that at the LB/SAMs interface, ionic bonds. have formed for the modification with -NH₂ while hydrogen bonding occurred for modifications with -OH. -COOH and -SO₃Na,respectively. It can be concluded that the ionic or hydrogen bonding at the LB/SAM interface is responsible for the improvement in homogeneity and stability. It was believed that the less defected films after the time aging were most probably due to the ionic bond and hydrogen bonding mentioned above.     

Adsorption characteristics of tripodal thiol-functionalized porphyrins on gold

X-ray photoelectron and Fourier transform infrared spectroscopy studies are reported for self-assembled monolayers (SAMs) of two tripodal thiol-functionalized metalloporphyrins (Zn and Cu) and three benchmark tripods on gold substrates. The tripodal unit common to all five molecules is 1-(phenyl)-1,1,1-tris(4-mercaptomethylphenyl)methane (Tpd). Both porphyrins contain S-acetyl-protected thiols and are linked to the 4-position of the phenyl ring of Tpd via a phenylethyne group. The benchmark molecules include (1) two tripods containing a bromine atom at the 4-position of the apical phenyl ring, one a free thiol and the other its S-acetyl-protected analogue, and (2) a S-acetyl-protected tripod containing a phenylethyne unit at the 4-position of the apical phenyl group. Together, the spectroscopic studies reveal that none of the five tripodal molecules bond to the gold surface via all three sulfur atoms. Instead, the average number of bound thiols ranges from 1.5 to 2, with the porphyrinic molecules generally falling at the middle to upper end of the range and the smallest benchmark tripods falling at the lower end. Similar surface binding is found for the S-acetyl-protected and free benchmark tripods, indicating that the presence of the protecting group does not influence binding. Furthermore, the surface binding characteristics of the SAMs are not sensitive to deposition conditions such as solvent type, deposition time, or temperature of the solution.     

Optimizing the quality of monoreactive perfluoroalkylsilane-based self-assembled monolayers

Self-assembled monolayers (or SAMs) created from monoreactive perfluoroalkylsilanes by deposition from a toluene solution are investigated for the dependence of their quality on processing conditions. Surface-sensitive spectroscopic techniques are used to provide feedback on the processing conditions in which solution temperature, silane concentration, and reaction time are optimized to improve the quality of these SAMs. For these analyses, monolayers are formed at 20, 40, 60, or 80 °C from solutions containing between 0.5 and 5 mM perfluoroalkylsilane over a period of up to 5 h. Physically adsorbed molecules are removed from these surfaces by extraction to determine the quality of the covalently bound monolayer. Water contact angle measurements, spectroscopic ellipsometry, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM), respectively, are used in combination to assess the uniformity of the surface hydrophobicity, monolayer thickness, composition of the assembled perfluoroalkylsilane molecules, and topography of these monolayers. A comparison is also presented for two approaches to fill defects within these solvent extracted monolayers with more perfluoroalkylsilane molecules, aiming to improve the quality of these SAMs. A detailed XPS analysis is used to assess both the relative changes in density and average tilt of molecules within the monolayers as the process temperature is increased in increments from 20 to 80 °C. The observed differences in quality of the SAMs are attributed to temperature- and time-dependent organization and reactivity of the silane molecules. Although the assembly of these monoreactive perfluoroalkylsilanes is driven by thermodynamics, the quality of the monolayer is ultimately limited by the kinetics and mass transport during this assembly process. Lessons from these studies can be exploited for improving the quality of monolayers composed of other alkylsilane molecules that are covalently bound to the surfaces of oxides.     

Alkanethiols on platinum: multicomponent self-assembled monolayers

We have studied the formation of self-assembled monolayers (SAMs) of n-alkanethiols on platinum thin films using X-ray photoelectron spectroscopy (XPS), reflection-absorption infrared spectroscopy (RAIRS), spectroscopic ellipsometry (SE), and contact angle (CA) measurements. Specifically, SAMs of 1-hexanethiol, 1-dodecanethiol, and 1-octadecanethiol were grown on polycrystalline Pt films, and the effects of Pt surface preparation, deposition conditions, and solvent treatments on the initial quality and stability of the monolayer in air were investigated. The SAMs prepared under ambient conditions on piranha-cleaned and UV/ozone-cleaned substrates were compared to monolayers formed on template-stripped Pt in an inert atmosphere. We found that alkanethiols deposited from 1 mM ethanolic solutions on piranha-cleaned Pt formed densely packed monolayers in which alkyl chains were oriented close to the surface normal. Stored in the laboratory ambient, these monolayers were unchanged over about 1 week but were largely oxidized in about 1 month. No evidence was found of molecules being weakly bound within the monolayer or having undergone C-S bond scission; however, three distinct sulfur states were observed for all samples in the XPS of the S 2p region. The lowest- and highest-binding-energy components are assigned to alkylthiolate and partially oxidized alkylthiolate species, respectively. The remaining S 2p component (approximately one-third of the sulfur layer), intermediate in binding energy between the other two components, is attributed to a chemisorbed species with a S binding configuration distinct from the majority alkylthiolate: for example, S bound to Pt bound to O, S with a different Pt coordination number, or S in an adsorbed disulfide.     

Effects of synthetic amphiphilic alpha-helical peptides on the electrochemical and structural properties of supported hybrid bilayers on gold

Amphiphilic alpha-helices were formed from designed synthetic peptides comprising alanine, phenylalanine, and lysine residues. The insertion of the alpha-helical peptides into hybrid bilayers assembled on gold was studied by a variety of methods to assess the resulting structural characteristics, such as electrical resistance and molecular orientation. Self-assembled monolayers (SAMs) of dodecanethiol (DDT); octadecanethiol (ODT); and 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol (DPPTE) were formed on gold substrates with and without incorporated peptide. Supported hybrid bilayers and multilayers of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) were formed on SAMs by the "paint-freeze" method of bilayer formation. Modeling of electrochemical impedance spectroscopy data using equivalent electrochemical circuits revealed that the addition of peptide decreased dramatically the resistive element of the bilayer films while maintaining the value of the capacitive element, indicating successful incorporation of peptide into a well-formed bilayer. Near-edge X-ray absorption fine structure spectroscopy data provided evidence that the molecules in the SAMs and hybrid multilayers were ordered even in the presence of peptide. The peptide insertion into the SAM was confirmed by observing the pi* resonance peak correlating with phenylalanine and a peak in the nitrogen K-edge regime attributable to the peptide bond.     

Effect of the phase states of self-assembled monolayers on pentacene growth and thin-film transistor characteristics

To investigate the effects of the phase state (ordered or disordered) of self-assembled monolayers (SAMs) on the growth mode of pentacene films and the performance of organic thin-film transistors (OTFTs), we deposited pentacene molecules on SAMs of octadecyltrichlorosilane (ODTS) with different alkyl-chain orientations at various substrate temperatures (30, 60, and 90 degrees C). We found that the SAM phase state played an important role in both cases. Pentacene films grown on relatively highly ordered SAMs were found to have a higher crystallinity and a better interconnectivity between the pentacene domains, which directly serves to enhance the field-effect mobility, than those grown on disordered SAMs. Furthermore, the differences in crystallinity and field-effect mobility between pentacene films grown on ordered and disordered substrates increased with increasing substrate temperature. These results can be possibly explained by (1) a quasi-epitaxy growth of the pentacene film on the ordered ODTS monolayer and (2) the temperature-dependent alkyl chain mobility of the ODTS monolayers.     

Unimolecular rectification of monolayers of CH3C(O)S-C14H28Q(+)-3CNQ(-) and CH3C(O)S-C16H32Q(+)-3CNQ(-) organized by self-assembly, Langmuir-Blodgett, and Langmuir-Schaefer techniques

The advantage of "self-assembly" (strong covalent binding to substrates) was combined with the advantage of Langmuir-Blodgett (LB) or Langmuir-Schaefer (LS) transfer to a solid substrate (quantitative transfer of monolayers to the substrate). The electrical rectification (asymmetric conduction) by a monolayer of thioacetylalkylquinolinium tricyanoquinodimethanide was critically compared when these molecules had been transferred, by such competing techniques, onto gold electrodes, and then covered by a "cold gold" pad electrode. Unimolecular rectification was observed in the expected directions in the LB and LS monolayers. The Self-Assembled Monolayers (SAMs) were disordered; macroscopic measurements of rectification were unsuccessful for the SAMs, but successful for the down-stroke LB and LS monolayers, whose orientation and potential bonding to the Au surface should be identical to that of an ideal SAM.     

三氯锗丙酸及其衍生物自组装单分子膜的制备与表征

首次制备了三氯锗丙酸及其酯类衍生物(Cl₃GeCH₂CH₂COOC_nH_2n+1,n=0,2,4,6)在羟基化的单晶硅片上的自组装单分子膜,并利用接触角测量、椭圆偏振和光电子能谱法进行结构表征.结果表明,这类分子的自组装行为与三氯硅烷相似,组装后在基底表面形成准二维锗烷网状排布;分子链轴有一定倾斜角;膜表面润湿性随表征液体和三氯锗丙酸尾链取代基不同而不同.     

Synthesis and surface structure of thymine-functionalized, self-assembled monolayer-protected gold nanoparticles

Thymine-functionalized SAM-protected gold nanoparticles with diameters of 2.2 +/- 0.3 nm and 7.0 +/- 1.0 nm were prepared via a modified two-phase transfer method. UV-vis spectra showed that particle size and solvent type, as well as surface charge, influenced the gold surface plasmon band absorption, along with the interaction between thymine terminal groups in the solution. Although the bulky thymine end groups interacted strongly on the particle surface, a well-ordered monolayer of thyminethiol derivatives with a long hydrocarbon chain was formed on the particle surface, exhibiting an ordered, all-trans conformation of the methylene backbone, similar to those of corresponding self-assembled monolayers (SAMs) generated from normal alkanethiols. A larger particle size and a longer reaction time facilitated the formation of more ordered thymine-terminated thiol SAMs. Thermal analysis indicated that reorientation of the SAMs during heat treatment occurred by two processes, caused possibly by the separate recrystallization of the hydrocarbon long chains and thymine units. More ordered SAMs with a higher thermal stability were formed on the larger particle surfaces when compared with those on the smaller ones. A greater density of molecular packing was found on the smaller particle surfaces. However, SAMs formed on the larger gold particles resembled 2D SAMs on the smooth, flat gold surfaces. XPS results confirmed the thymine structure as well as the chemical bond between gold and sulfur. One type of adsorbed sulfur species was observed for the smaller particles and two for the larger ones, but a slightly higher binding energy of thiolate was found for the smaller ones.     

Microcontact printed poly(amidoamine) dendrimer monolayers on silicon oxide surface

Patterning of silicon substrates with poly(amidoamine) generation 5 (PAMAM-G5) dendrimers using soft lithographic microcontact printing (μCP) is presented. μCP is shown to yield monolayers of dendrimers patterned with high level of definition over μm² to mm² areas. The patterns are stable over a period of weeks, which is attributed to the suppressed diffusion of partially charged G5 PAMAM on oxidized silicon. However, the dendrimers studied were shown to be relatively weakly bound to the substrate when subjected to lateral stresses. In aqueous conditions most of the dendrimers desorbed from the substrate.