Thermal analysis study of Bi<Subscript>2</Subscript>Sr<Subscript>2</Subscript>Ca<Subscript>2</Subscript>Cu<Subscript>3-x</Subscript>Er<Subscript>x</Subscript>O<Subscript>10+δ</Subscript> glass-ceramic system

Summary We have fabricated glasses in the Bi-2223 HT_c superconductor system with Bi₂Sr₂Ca₂Cu_3-xEr_xO_{10+ δ} nominal composition, where x=0.5 and 1.0, by the glass-ceramic technique. Using an analysis developed for non-isothermal crystallization studies, information on some aspects of crystallization temperature and thermal properties has been obtained. The crystallization studies were made using DTA with several uniform rates. The calculations of crystallization activation energies, E_a, and the Avrami parameters, n, were made based on the non-isothermal kinetic theory of Kissinger and the Ozawa’s equations. The DTA data of the samples showed that the first crystallization temperature, T_x1, increases and the second crystallization temperature, T_x2, decreases by increasing the Er concentration. This suggests that the Er substitution had significant effect on the glassification of the BSCCO material due to change on the surface nucleation and increased ionic activities at high temperature region. The activation energy for crystallization, E_a, of the samples was also showed an increase at high Er concentration case. However, the Avrami parameter, n, decreased from 2.5 to 1.7 for x=0.5 and 1.0 samples, respectively. This suggests that the growth mechanism is diffusion-controlled and three-dimensional parabolic growth takes place near the first crystallization temperature. The oxidization rates and the activation barrier for oxygen out-diffusion process, E, was calculated using the TG data. It was found that the total mass gain in the x=0.5 sample is comparably smaller than that of the x=1.0 sample. This shows that the oxygen absorption of the x=1.0 sample is faster than the x=0.5 sample, leading to increase in the oxidization rate in the x=1.0 material.     

Structure of Zn<Subscript>3</Subscript>P<Subscript>2</Subscript>

The structure of Z_n3P₂ (P 4₂/nmc, a = b = 8. 0785 Å, c = 11. 3966 Å) was solved and refined to R = 3. 2% in a precision X-ray diffraction experiment (λ-MoK _a, graphite monochromator on a primary beam, 27,496 reflections) . Interatomic distances and bond angles have been determined. The fcc lattice of the structure is built from phosphorus atoms, and the zinc atoms occupy 3/4 of all tetrahedral voids; the structure is described by two equivalent models where 1/4 occupied (by zinc atoms) and 1/4 vacant voids change places. The zinc atoms that occupy the voids following the diamond principle do not change places.Original Russian Text Copyright © 2004 by I. E. Zanin, K. B. Aleinikova, M. M. Afanasiev, and M. Yu. Antipin__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 889–892, September–October, 2004.     

Investigation of the effect of berberines alkaloids in <Emphasis Type="Italic">Coptis chinensis</Emphasis> Franch on <Emphasis Type="Italic">Bacillus shigae</Emphasis> growthby microcalorimetry

The inhibitory effects of five berberines alkaloids (BAs) from rhizoma of Coptis chinensis Franch, a traditional Chinese medicinal (TCM) herb, on Bacillus shigae (B. shigae) growth were investigated by microcalorimetry. The power-time curves of B. shigae with and without BAs were acquired; meanwhile, the extent and duration of inhibitory effects on the metabolism were evaluated by growth rate constants (k1, k2), half inhibitory ratio (IC50), maximum heat output (Pmax), and peak time (tp). The values of k1 and k2 of B. shigae in the presence of the five BAs decreased with the increasing concentrations of BAs. Moreover, Pmax was reduced, and the value of tp increased with increasing concentrations of the five drugs. The inhibitory activity varied with different drugs. IC50 of the five BAs was respectively 75 μg/mL for berberine, 90 μg/mL for coptisine, 115 μg/mL for palmatine, 220 μg/mL for epiberberine, and 400 μg/mL for jatrorrhizine. The sequence of antimicrobial activity of the five BAs berberine ＞ coptisine ＞ palmatine ＞ epiberberine ＞ jatrorrhizine. The functional groups methylenedioxy at C2 and C3 on phenyl ring improve antimicrobial activity more strongly than methoxyl at C2 and C3 on phenyl ring. However, the effect of bacteriostasis is not significant with methylenedioxy or methoxyl at C9 and C10 on phenyl ring.     

Synthesis of magnesium catecholate and <Emphasis Type="Italic">o</Emphasis>-semiquinone complexes by oxidation of the metal with 3,6-di-<Emphasis Type="Italic">tert</Emphasis>-butyl-<Emphasis Type="Italic">o</Emphasis>-benzoquinone

Oxidation of amalgamated magnesium metal with 3,6-di-tert-butyl-o-benzoquinone (1) in different aprotic organic solvents afforded magnesium catecholate and bis-o-semiquinolate complexes. The catecholate derivatives of magnesium CatMgL₂ (Cat is the 3,6-di-tert-butyl-o-benzoquinone dianion, L = THF or Py) were synthesized in high yields in pyridine and tetrahydrofuran, respectively. The reactions in diethyl ether or dimethoxyethane produced hexacoordinated metal bis-o-semiquinolates SQ₂MgL_n (SQ is the 3,6-di-tert-butyl-o-benzoquinone radical anion, L = Et₂O, n = 2; L = DME, n = 1). The reaction with the use of toluene as the solvent gave a magnesium bis-o-semiquinolate complex containing the coordinated unreduced o-quinone molecule. The molecular structures of the [CatMgPy₂]₂ and SQ₂Mg·DME complexes were established by X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 92–98, January, 2007.     

‘Click Synthesis’ of Some Novel O‐Substituted Oximes Containing 1,2,3‐Triazole‐1,4‐diyl Residues as New Analogs of β‐Adrenoceptor Antagonists

The ‘click synthesis’ of some novel O‐substituted oximes, 7a – 7t , which contain 1,2,3‐triazolediyl residues, as new analogs of β‐adrenoceptor antagonists is described (Schemes 1–4). The synthesis of these compounds was achieved in four to five steps. The formation of oximes of 9H‐fluoren‐9‐one and benzophenone, i.e., 9a and 9b , respectively, followed by their reaction with propargyl bromide, afforded O‐propargyl oximes 10a and 10b , respectively, which by a subsequent CuI‐catalyzed Huisgen cycloaddition with prepared β‐azido alcohols 11a – 11j (Schemes 2 and 3), led to the target compounds 7a – 7t in good yields.     

Synthesis of 2-aryl-6-nitro-4-(<Emphasis Type="Italic">vic</Emphasis>-triazol-1-yl)-1<Emphasis Type="Italic">H</Emphasis>-indoles from <Emphasis Type="Italic">E</Emphasis>-2,4,6-trinitrostilbenes

A method is developed for the preparation of 4-(vic-triazol-1-yl)indoles that involves replacement of the ortho-NO₂ group in E-2,4,6-trinitrostilbenes by an azido group, condensation of E-2-azido-4,6-dinitrostilbenes with acetylacetone, replacement of the second ortho-NO₂ group in the resulting stilbenes by N₃, and subsequent thermolysis of the azide into the target indole. The reactions of E-2-azido-4,6-dinitrostilbenes with cyclohexane-1,3-dione gave E-2-amino-4,6-dinitrostilbenes, which can be used for selective transformation of the ortho-NO₂ group into an amino group in E-2,4,6-trinitrostilbenes. Dedicated to Academician N. K. Kochetkov on the occasion of his 90th birthday. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1293–1296, May, 2005.     

Model Construction for the A–B–C Ring System of Lysergic Acid via Vilsmeier–Haack‐Type Cyclization of 1H‐Indole‐4‐propanoic Acid Derivatives

Vilsmeier–Haack‐type cyclization of 1H‐indole‐4‐propanoic acid derivatives was examined as model construction for the A–B–C ring system of lysergic acid ( 1 ). Smooth cyclization from the 4 position of 1H‐indole to the 3 position was achieved by Vilsmeier–Haack reaction in the presence of K₂CO₃ in MeCN, and the best substrate was found to be the N,N‐dimethylcarboxamide 9 (Table 1). The modified method can be successfully applied to an α‐amino acid derivative protected with an N‐acetyl function, i.e., to 27 (Table 2); however, loss of optical purity was observed in the cyclization when a chiral substrate (S)‐ 27 was used (Scheme 5). On the other hand, the intramolecular Pummerer reaction of the corresponding sulfoxide 20 afforded an S‐containing tricyclic system 22 , which was formed by a cyclization to the 5 position (Scheme 3).     

Structure and photochromism of 2-(<Emphasis Type="Italic">N</Emphasis>-acyl-<Emphasis Type="Italic">N</Emphasis>-arylaminomethylene)benzo[<Emphasis Type="Italic">b</Emphasis>]thiophen-3(2<Emphasis Type="Italic">H</Emphasis>)-ones

It was shown by electron absorption spectroscopy and X-ray diffraction analysis that steric strains in photochromic 2-(N-acyl-N-arylaminomethylene) benzo[b]thiophen-3(2H)-one molecules ortho-substituted in the N-phenyl ring increase the quantum yield of the N→O photoinduced rearrangement in accord with an increase in the steric constant of the ortho-substituent.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2151–2155, October, 2004.     

Synthesis, π‐Face‐Selective Aggregation,and π‐Face Chiral Recognition of Configurationally Stable C3‐Symmetric Propeller‐Chiral Molecules with a π‐Core

The C₃‐symmetric propeller‐chiral compounds (P,P,P)‐ 1 and (M,M,M)‐ 1 with planar π‐cores perpendicular to the C₃‐axis were synthesized in optically pure states. (P,P,P)‐ 1 possesses two distinguishable propeller‐chiral π‐faces with rims of different heights named the (P/L)‐face and (P/H)‐face. Each face is configurationally stable because of the rigid structure of the helicenes contained in the π‐core. (P,P,P)‐ 1 formed dimeric aggregates in organic solutions as indicated by the results of ¹H NMR, CD, and UV/Vis spectroscopy and vapor pressure osmometry analyses. The (P/L)/(P/L) interactions were observed in the solid state by single‐crystal X‐ray analysis, and they were also predominant over the (P/H)/(P/H) and (P/L)/(P/H) interactions in solution, as indicated by the results of ¹H and 2D NMR spectroscopy analyses. The dimerization constant was obtained for a racemic mixture, which showed that the heterochiral (P,P,P)‐ 1 /(M,M,M)‐ 1 interactions were much weaker than the homochiral (P,P,P)‐ 1 /(P,P,P)‐ 1 interactions. The results indicated that the propeller‐chiral (P/L)‐face interacts with the (P/L)‐face more strongly than with the (P/H)‐face, (M/L)‐face, and (M/H)‐face. The study showed the π‐face‐selective aggregation and π‐face chiral recognition of the configurationally stable propeller‐chiral molecules.     

catena‐Poly­[europium‐tri‐μ‐4‐methyl­benzoato]

Each Eu³⁺ ion in the title compound, catena‐poly­[europium(III)‐tri‐μ‐4‐methyl­benzoato‐O:O,O′;O:O,O′;O,O′:O′], {[Eu(C₈H₇O₂)₃]₃}_n, is coordinated by nine O atoms, and three Eu atoms form a trimeric unit. These trimeric units are linked by bridging–chelating carboxyl­ates to form an infinite one‐dimensional polymer chain.     

Study on Inclusion Complex Formation of <Emphasis Type="Italic">m</Emphasis>-Aminobenzoic Acid with Native and Substituted <Emphasis Type="Italic">β</Emphasis>-Cyclodextrins

The complex formation of native and substituted β-cyclodextrins with m-aminobenzoic acid in water was characterized by calorimetry, ¹H NMR and UV spectroscopic studies. These studies showed that β-, hydroxypropyl-β- and methyl-β-cyclodextrins form 1:1 inclusion complexes with m-aminobenzoic acid. The thermodynamic properties of complex formation (K,Δ_c G ^o,Δ_c H ^o,Δ_c S ^o) were calculated. It was found that the processes of complexation are mainly favorable entropically. Introduction of hydroxypropyl- and methyl-substituents into the β-CD molecule results in negligible enhancement of stability of the complexes formed. The structure of these substituents has no influence on the stability constant values. The insertion of the carboxylic group of m-aminobenzoic acid into the cyclodextrin cavity was confirmed by ¹H NMR data.     

Hydrothermal synthesis of one-dimensional (1D) Na<Subscript>x</Subscript>TiO<Subscript>2</Subscript> nanostructures

Nanorods of sodium titanium dioxide bronze Na_xTiO₂ were synthesized by the hydrothermal treatment of the amorphous TiO₂·nH₂O gel with 10 M NaOH followed by ultrasonication in 0.1 M HCl and thermal treatment (500°C, 10 h). The thermal treatment of the nanorods does not change the morphology of the particles. According to the electron diffraction data, the Na_xTiO₂ nanorods grow along the c axis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 71–73, January, 2005.     

Stereoselective Reduction of `Capsanthol‐3′‐ones' (=3,6′‐Dihydroxy‐β,κ‐caroten‐3′‐ones) by Complex Hydrides

The (3R,5′R,6′R)‐ and (3R,5′R,6′S)‐capsanthol‐3′‐one (=3,6′‐dihydroxy‐β,κ‐caroten‐3′‐one; 4 and 5 , resp.) were reduced by different complex metal hydrides containing organic ligands. The ratio of the thus obtained diastereoisomeric (3′S)‐capsanthols 2 and 3 or (3′R)‐capsanthols 6 and 7 , respectively, was investigated. Four complex hydrides showed remarkable stereoselectivity and produced the (3′R,6′S)‐capsanthol ( 6 ) in 80 – 100% (see Table 1). The starting materials and the products were characterized by UV/VIS, CD, ¹H‐ and ¹³C‐NMR, and mass spectra.     

Folding–Unfolding Equilibrium of a Methylidene‐Substituted β‐Peptide

β‐Peptides possess the ability to fold into secondary structure elements, and this property, together with resistance to biodegradation, makes these compounds interesting for pharmaceutical applications. Recently, a novel class of β‐peptides containing methylidene moieties was described. The GROMOS 53A6 force field was used to simulate the folding equilibrium of a β³‐hexapeptide with methylidene (CH₂?) groups at all six CA‐atoms. Due to the rotational barriers induced by these methylidene groups, the helical secondary‐structure elements, normally found in β³‐peptides, are disfavored in this molecule. Simulations, started from fully extended and 3₁₄‐helical conformations, showed that the molecule adopts a complete 2₈‐helix for ca. 5% of the time and partial 2₈‐helical conformations for ca. 20% of the time. Yet, as suggested by experiments, the folding equilibrium is dominated by unfolded conformations.     

Effective Methods for the Synthesis of N‐Methyl β‐Amino Acids from All Twenty Common α‐Amino Acids Using 1,3‐Oxazolidin‐5‐ones and 1,3‐Oxazinan‐6‐ones

N‐Methyl β‐amino acids are generally required for application in the synthesis of potentially bioactive modified peptides and other oligomers. Previous work highlighted the reductive cleavage of 1,3‐oxazolidin‐5‐ones to synthesise N‐methyl α‐amino acids. Starting from α‐amino acids, two approaches were used to prepare the corresponding N‐methyl β‐amino acids. First, α‐amino acids were converted to N‐methyl α‐amino acids by the so‐called ‘1,3‐oxazolidin‐5‐one strategy’, and these were then homologated by the Arndt–Eistert procedure to afford N‐protected N‐methyl β‐amino acids derived from the 20 common α‐amino acids. These compounds were prepared in yields of 23–57% (relative to N‐methyl α‐amino acid). In a second approach, twelve N‐protected α‐amino acids could be directly homologated by the Arndt–Eistert procedure, and the resulting β‐amino acids were converted to the 1,3‐oxazinan‐6‐ones in 30–45% yield. Finally, reductive cleavage afforded the desired N‐methyl β‐amino acids in 41–63% yield. One sterically congested β‐amino acid, 3‐methyl‐3‐aminobutanoic acid, did give a high yield (95%) of the 1,3‐oxazinan‐6‐one ( 65 ), and subsequent reductive cleavage gave the corresponding AIBN‐derived N‐methyl β‐amino acid 61 in 71% yield (Scheme 2). Thus, our protocols allow the ready preparation of all N‐methyl β‐amino acids derived from the 20 proteinogenic α‐amino acids.     

Selenium‐Containing Heterocycles from Isoselenocyanates: Synthesis of 5‐Amino‐2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐selones

The reaction of S‐methylisothiosemicarbazide hydroiodide (=S‐methyl hydrazinecarboximidothioate hydroiodide; 1 ), prepared from thiosemicarbazide by treatment with MeI in EtOH, and aryl isoselenocyanates 5 in CH₂Cl₂ affords 3H‐1,2,4‐triazole‐3‐selone derivatives 7 in good yield (Scheme 2, Table 1). During attempted crystallization, these products undergo an oxidative dimerization to give the corresponding bis(4H‐1,2,4‐triazol‐3‐yl) diselenides 11 (Scheme 3). The structure of 11a was established by X‐ray crystallography.     

A re‐examination of supra­molecular aggregation in two polymorphs of acetone 2,4‐dinitro­phenyl­hydrazone

The structure of the triclinic polymorph of acetone 2,4‐dinitrophenylhydrazone, C₉H₁₀N₄O₄, has been redetermined from diffraction data collected at 120 (2) K; the mol­ecules are linked by C—H⋯O hydrogen bonds into centrosymmetric R₂²(10) dimers which are themselves linked into a chain by an aromatic π–π stacking inter­action. In the monoclinic polymorph, which crystallizes with Z′ = 2 in the space group P2₁/n, one type of mol­ecule forms dimers exactly as in the triclinic polymorph, while the other forms C(6) chains.     

Synthesis and biological activity of novel N‐benzoyl‐N‐tert‐butyl‐N′‐(β‐triphenylgermyl)propionylhydrazines

A series of new N‐benzoyl‐N‐tert‐butyl‐N′‐(β‐triphenylgermyl)propionylhydrazines were synthesized by the condensation reaction of β‐triphenylgermyl propanoic acid with N‐benzoyl‐N‐tert‐butylhydrazines in good yields by using N,N′‐dicyclohexylcorbodiimide as dehydrating agent. These title compounds were evaluated for molting hormone mimicking activity. The results of bioassay showed that the compounds exhibit moderate larvicidal activity, and toxicity assays indicated that the title compounds can induce a premature, abnormal and lethal larval molt. We found that the title compounds possess potential anticancer activities in vitro. Copyright © 2002 John Wiley & Sons, Ltd.     

N‐Methyl­pyridinium 3‐cyano‐4‐(di­cyano­methyl­ene)‐5‐oxo‐4,5‐di­hydro‐1H‐pyrrol‐2‐olate

The crystal structure of the title compound, C₆H₈N⁺·C₈HN₄O₂⁻, is characterized by three independent ion pairs (A, B and C) in the asymmetric unit. Each ion pair consists of an anion and a cation, and the three ion pairs have similar geometric parameters. All the anions are arranged as dianion dimers via two N—H⋯O hydrogen bonds and the dimers form one‐dimensional columns parallel to the b axis as a result of π–π interactions. The cations are also stacked, in two different ways: one type of stacking consists of alternating A and B cations, while the other type consists of C cations only. Each dianion dimer stack is surrounded by eight stacks of cations and is not connected directly to other dianion stacks.     

Synthesis and characterization of LiCo<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4</Subscript> powder by a novel CAM microwave-assisted sol–gel method for Li ion battery

LiMn₂O₄-based spinels are of great interest as positive electrode materials for lithium ion batteries. LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) spinel phases have been synthesized by novel citric acid-modified microwave-assisted sol–gel method. The structural properties of the synthesized products have been investigated by X-ray powder diffraction and scanning electron microscopy. To improve the recharge capacity of Li/LiCo _x Mn_2−x O₄ cells, the electrochemical features of LiCo _x Mn_2−x O₄ compounds have been evaluated as positive electrode materials. The structural properties of Co-doped oxides are very similar to LiMn₂O₄ electrode. Techniques like cyclic voltammetry, charge–discharge and cycle life are also used to characterize the LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) electrodes.