Influence of resin cross-linking on solid-phase chemistry

A range of PS-DVB resins were prepared by suspension polymerization with styrene, p-chloromethyl styrene, and DVB. Yields of polymerization increased (from 40% to almost 80%) with increasing cross-linking. The beads exhibited the expected swelling characteristics, with the 0.3% resin swelling to almost 9 times its dry volume in CHCl3. Kinetics of cleavage of the dye Methyl Red from the range of Rink linked resins showed rate enhancements of up to 500% between the 6.0 and the 0.3% cross-linked resins. Total synthesis of Kawaguchipeptin B was carried out on the resins, and their performance during the syntheses was investigated. Contrary to expectations, the purities of the cyclic peptide product increased with increasing resin cross-linking doubling from the 0.3-6.0% resin. A Suzuki reaction showed the half-lives of reaction increased with increasing resin cross-linking with an 11-fold increase in half-life between the 0.3-2.7% resin. Surprisingly, we observed very little reaction in the case of the 3.0 and 6.0% cross-linked resins.     

Solid-phase synthesis of the 2-aminobenzoxazole library using thioether linkage as the safety-catch linker

An efficient solid-phase methodology has been developed for the synthesis of 2-aminobenzoxazole derivatives. The key step in this procedure involves preparation of polymer-bound 2-mercaptobenzoxazole resins 3 by reaction of the Merrifield resin with 2-aminophenols and CS(2) in the presence of DIC in MeCN. Oxidation of the resulting resins followed by treatment with amines gives the desired 2-aminobenzoxazole products 5. Further diversification can be introduced to the key resin 11, derived from the nitro group containing resin 3c. This process produces the corresponding amine, which upon reaction with acid chlorides and isocyanates can be used to generate various 6-functionalized 2-aminobenzoxazole analogues 13 and 15.     

Anchoring dyes into multidimensional large-pore zeolites: a prospective use as chromogenic sensing materials

A versatile procedure for anchoring dyes into the pores of multidimensional zeolites by including organic dye precursors in the synthesis gel has been developed. To prove the concept, an aniline-functionalised zeolite Beta was obtained by reaction of triethylorthosilicate (TEOS), tetraethylammonium hydroxide, and N-methyl,N-(propyl-3-trimethoxysilyl)aniline (MPTMSA) in the presence of HF. Further extraction of the structure-directing agents resulted in a highly crystalline, white, functionalised zeolite Beta containing anchored aniline groups. Similar organic functionalised molecular sieves (OFMS) have been explored as novel catalysts, but, as far as we know, OFMS have never been used as precursors for dye-immobilisation or to design new solid-based host systems for selective molecular sensing processes as is reported here. In a second step the solids containing dyes were prepared by reaction of the hybrid material with the appropriate reactives to obtain tricyanovinylbenzene, triphenylpyrylium, azoic, and squaraine derivatives. All these reactions are straightforward and involve electrophilic aromatic substitution or diazotisation reactions at the electron-rich aniline ring. The final dye-functionalised solid materials were isolated by simple filtration and washing procedures and have been characterised by a number of techniques. In all cases the Beta structure of the solid remains unaltered. Among the large number of areas where dye-containing zeolites might be of importance, we were interested in testing their unconventional use as heterosupramolecular hosts in chromogenic protocols. To check their potential use as chemosensors, microporous solids with anchored triphenylpyrilium and squaraine dyes were selected and used as sensors for the chromogenic discrimination of amines. It was found that the response of both solids to amines was basically governed by the three-dimensional (3D) solid architecture that tuned the intrinsic unselective reactivity of the pyrylium dye. By using new solid-state supramolecular chemistry protocols we believe that these, and similar future dye-zeolite hosts, might be promising new sensor materials allowing the visible discrimination of selected target guests by size and/or polarity within families or closely related molecules.     

Functionalized cross-linked poly(vinyl alcohol) resins as reaction scavengers and as supports for solid-phase organic synthesis

New hydrophilic poly(vinyl alcohol) (PVA-OH) resins were prepared by an inverse suspension polymerization using epichlorohydrin as a cross-linker. These novel resins swell in a variety of solvents commonly used in solid-phase organic synthesis, such as dicholomethane, dioxane, methanol, tetrahydrofuran, and dimethylformamide. In addition, PVA-OH shows excellent swelling in water. The cross-linked PVA-OH beads were functionalized with an aldehyde group and were tested as scavengers for primary amines in three different reactions: amide bond formation, reductive amination reaction, and urea formation. With 1-2 equiv of the PVA aldehyde resin, all the excess primary amines were successfully scavenged. The utility of PVA-OH resins as solid supports in mono- and dipeptide synthesis was also investigated using symmetrical anhydride and MSNT/MeIm (2,4,6-mesitylenesulfonyl-3-nitro-1,2,4-triazolide in the presence of 1-methylimidazol) methods.     

Preparation and catalytic performance of quaternary ammonium base resin for methanolysis of natural phosphatidylcholine

The most acceptable method for preparing glycerophosphocholine is to hydrolyse the natural phosphatidylcholine and use the quaternary ammonium base resin, as a promising heterogeneous catalyst can simplify the craft and minimise the problems existing in the homogeneous catalytic process. However, most of the resins reported in the literature are commercial trimethyl benzyl ammonium base resins and the application of other longer carbon-chain quaternary ammonium resins has not been reported. In the present work, a series of quaternary ammonium base resins were prepared from chloromethyl polystyrene microspheres and different tertiary amines and were used to prepare glycerophosphocholine from natural phosphatidylcholine. The factors affecting the exchange capacity and activity of the resin were investigated. The results showed that the resin possessed a better activity and stability under the following conditions: 1,4-dioxane as solvent, triethylamine as amination agent, reaction temperature of 60°C and amination time of 3 h; it was then used in the methanolysis of phosphatidylcholine by ultrasound-assisted reaction at ambient temperature, with the conversion of phosphatidylcholine attaining 97 % after 4 h. The catalyst was easy to separate from the reaction mixture and could also be readily available for repeat use; the activity and stability were largely consistent after six repeat uses.     

pH indicating resins

pH indicating resins were prepared by covalently attaching carboxylic acid derivatives of sulfthalein dyes, synthesized using a Suzuki cross-coupling, onto resin beads. The resin-bound indicators showed the expected colour changes according to pH and their behaviour was analysed using a micro UV/Vis spectrometer.     

Star-shaped tripodal chemosensors for the detection of aliphatic amines

In this work, three new tripodal triphenylamine dyes are presented that are capable of reversibly binding amines and diamines to form hemiaminals through a covalent bond. The dyes were synthesized by the Heck reaction and possess stilbene units with one, two, or three trifluoroacetyl groups as receptor moieties. Their interaction with amines and diamines led to changes in their absorption and emission properties, which were detected by UV/Vis and fluorescence spectroscopy. The influence of the number of trifluoroacetyl receptor moieties on the selectivity and sensitivity of the dyes was studied. Enhanced sensitivity and selectivity for diaminoalkanes was found for the dye we have labeled Tripod-1, with three chemically reactive trifluoroacetyl groups, related to only one or two trifluoroacetyl groups in the dye molecule.     

Solution-phase parallel synthesis of carbamates as gamma-secretase inhibitors

A novel methodology for parallel liquid-phase synthesis of carbamates suitable for the preparation of sterically hindered molecules is disclosed. The alcohols are converted to 4-nitrophenylcarbonates, followed by the reaction with amines. Side product 4-nitrophenol and the unreacted excess amines are scavenged by appropriately chosen cleanup resins, selected among Amberlyst A26 (hydroxide form) and macroporous sulfonic acid (MP-TsOH) or polystyrene isocyanate (PS-NCO) and polystyrene benzaldehyde (PS-PhCHO) resins. As a part of a medicinal chemistry program directed toward finding gamma-secretase inhibitors as prospective drug candidates for Alzheimer's disease, a 6 x 24 library of carbamates was prepared. Out of 144 library members, 133 had a purity for the targeted compound of 80% or better. The prepared compounds were assessed in the gamma-secretase inhibition assay and demonstrated activity with IC 50 values in the range from 1 microM to 5 nM, with the activity of 7 compounds being better than 10 nM.     

Synthesis of Azobenzene Dyes Mediated by CotA Laccase

An eco‐friendly protocol for the synthesis of azobenzene dyes by oxidative coupling of primary aromatic amines is reported. As efficient biocatalytic systems, CotA laccase and CotA laccase/ABTS (2,2′‐azinobis(3‐ethylbenzothiazoline‐6‐sulfonic acid)) enable the oxidation of various substituted anilines, in aqueous medium, ambient atmosphere and under mild reaction conditions of pH and temperature. A series of azobenzene dyes were prepared in good to excellent yields in an one‐pot reaction. A mechanistic proposal for the formation of the azo derivatives is presented. Our strategy offers an alternative approach for the direct synthesis of azobenzene dyes, avoiding the harsh conditions generally required for most of the traditional synthetic methods.     

Tailoring ultraresins based on the cross-linking of polyethylene imines. Comparative investigation of the chemical composition, the swelling, the mobility, the chemical accessibility, and the performance in solid-phase synthesis of very high loaded resins

Ultraresins have been prepared from polyethyleneimines and cross-linking molecules and have been provided with various degrees of cross-linking. The total nitrogen loading and the loading with secondary and with tertiary amines have been determined in all products. Nitrogen loadings of the novel resins were up to 15 mmol/g, reactive secondary amines up to 13.8 mmol/g. In addition to the exceptionally high loading, the novel resins displayed efficient swelling volumes in polar and nonpolar solvents. The mobility of resin-bound species as determined by EPR-spectroscopy, depending on the amount of cross-linker, indicated good flexibility and reactivity of this resin type. The novel, high-loaded resins have been investigated subsequently in solid-phase synthesis. The Rink amide linker and two different hydroxy linkers (hydroxyacetamide, HMPB) have been attached to the resin. Despite the high loadings, the secondary amines were easily accessible and could be functionalized exhaustively. Reactivity of the linker-coupled resins was found to be closely related to the resin composition. Increased resin cross-linking led to reduced swelling, reduced mobility, and reduced reactivity in the synthesis of a medium-sized model peptide. As the result of the systematic investigation of structure-property relations in Ultraresins, a support material was identified that combined high reactivity and a mobility in the range of the extremely flexible Tentagel supports. In the optimized Ultraresin, >95% of all available secondary nitrogens could be coupled with Rink linker or with the small 2-hydroxyacetamide anchor, resulting in loadings from 2.7 to 6.8 mmol/g, respectively. A resin with an attached HMPB linker and spacer delivered analytically pure peptides in solid-phase synthesis, fully exploiting the exceptionally high loadings.     

Solid phase synthesis of tertiary amines on amide REM resins: Grignard and metal hydride compatible resins

Four new amide REM resins (AM REM 2-5) are described, and their use is illustrated for the synthesis of tertiary amines 6-9 and 13-16. Amide REM resins 4 and 5, which have a phenyl ring attached to the amide nitrogen, are found to give superior product yields and purities, and the resins are stable to a wider range of reagents and conditions compared to REM resin 1.     

Removal of some dyes from industrial effluents by polymeric materials and gamma-irradiation

The radiolysis of two basic dyes (Astrazon Red 6B and Astrazon Blue BG-200%), was investigated as a function of dye concentration, pH, irradiation dose and dose rate. It was found that the Astrazon Red 6B dye showed more radiation degradation than the Astrazon Blue BG-200% dye. Combining irradiation with the conventional treatment enhanced the degree of degradation. Addition of oxygen or hydrogen peroxide showed this enhancement, while nitrogen showed no change. A pH drop was observed and may be attributed to the degradation of the dye molecules to lower molecular weight compounds such as organic acids. Experiments on the adsorption or exchange the dyes onto GAC, some polymeric ion exchange resins and polymeric membranes were carried out showing that GAC had the highest adsorption capacity. By combined treatment of irradiation and adsorption, the total removal of these toxic dyes was achieved.     

α,α-Dialkylglycines obtained by solid phase Ugi reaction performed over isocyanide functionalized resins

The multicomponent Ugi reaction is a straightforward method that can be used for the synthesis of highly hindered C-tetrasubstituted amino acids by reacting an amine, a ketone or aldehyde, a carboxylic acid and an isocyanide. In the present work, the synthesis of several α,α-dialkylglycines (α,α-diethylglycine, Deg; α,α-dipropylglycine, Dpg; 1-amino-1-cyclohexanecarboxylic acid, Ac₆c) was achieved by solid phase Ugi reaction using resins functionalized with the isocyanide group. Since no resins with these features were available commercially, the functionalization of an aminomethylated resin started by the use of glycine (Gly), β-alanine (β-Ala) and γ-aminobutyric acid (GABA) as spacers. After spacer N-formylation, followed by dehydration, isocyanide functionalised resins were obtained. The resins were then used in solid phase Ugi reaction, using phenylacetic acid as the acid component, 4-methoxybenzylamine as the amine component and different ketones, to afford the desired N-acylated α,α-dialkylglycines in good overall yields (60–80%), after acidolytic cleavage from the resin, thus proving the feasibility of this approach.     

New stable backbone linker resins for solid-phase peptide synthesis

[reaction: see text] Two new 4-methoxybenzaldehyde backbone linker resins were developed for the solid-phase synthesis of peptides. The linkers are very stable during the cleavage of common protecting groups for amines (Fmoc, Boc) and carboxylic acids (Me, All, tBu) in peptide synthesis. Cleavage from the resin with refluxing TFA is sufficiently mild for peptides containing polar and nonpolar amino acids.     

A Novel Hydrazine Linker Resin and Its Application for the Solid-Phase Synthesis of alpha-Branched Primary Amines

A novel hydrazine linker resin for solid-phase organic synthesis has been developed. Starting from Merrifield resin, the new N-butyl-N-methylpolystyrene-hydrazine linker is prepared in three steps. Polymer-supported hydrazones, readily prepared from aldehydes and the hydrazine resin, react with alkyl- and arylorganolithium reagents under 1,2-addition to the C-N double bond to afford the corresponding hydrazines. Release from solid support was achieved by reductive N-N bond cleavage using the borane-tetrahydrofuran complex. The resulting alpha-branched primary amines were protected as their amides or carbamates, respectively, and, after purification, were obtained in good overall yields and in high purity (12 examples).     

N-烷基-N-酰基磺酰胺聚苯乙烯基微球作为固相酰化剂的研究

一种可循环使用的固相试剂：N-烷基-N-酰基磺酰胺聚苯乙烯基微球(5), 通过对聚苯乙烯磺酰氯微球树脂进行两步功能基化的修饰反应来制备. 制备过程如下：聚苯磺酰氯树脂(1)与伯胺(2)反应得到聚苯乙烯基N-烷基磺酰胺树脂(3), 树脂3用酰氯(4)或酸酐酰化得到N-烷基-N-酰基磺酰胺聚苯乙烯基树脂(5). 酰化的树脂5作为酰基转移试剂与亲核试剂胺反应得到二级酰胺. 根据5上取代基对酰胺生成的程度的影响结果表明, 烷基R¹和酰基(R²CO)对酰基转移反应活性的大小依次分别为：苯基＞苄基＞甲基＞正丁基＞＞H和对硝基苯甲酰基(苯甲酰基＞乙酰基. 胺的亲核能力对酰胺的收率也有一定的影响. N-苯基-N-苯甲酰基磺酰胺树脂重复使用3次没有发现活性降低.     

Development of a new linker for the solid-phase synthesis of N-hydroxylated and N-methylated secondary amines

Merrifield resin was modified by the introduction of an ortho-nitrophenylethanal group that served as a linker moiety to attach amines to the resin by reductive amination. Resin-bound tertiary amines were shown to be readily transferred into the respective liberated N-hydroxylated or N-methylated derivatives by either an oxidation/Cope elimination or a permethylation/Hofmann elimination protocol. With these two divergent liberation/derivatization options, the new resin offers new flexibility in the solid phase synthesis of N-modified secondary amines, for instance in spider toxin synthesis.     

Synthesis and properties of a new SASRIN resin derivative: SASRIN-2-pyridylthiocarbonate (SASRIN-TOPCAT) resin

A new SASRIN resin derivative, SASRIN-TOPCAT resin, was synthesized by the reaction of SASRIN resin with 2-thiopyridyl chloroformate. The new resin can be used for the loading of alcohols and thiols under neutral conditions, and the release of alcohol from the resin is achieved by the treatment of 1% TFA in CH₂Cl₂ for 15-60 min. Compared to the other reported resins, SASRIN-TOPCAT resin is more suitable for the loading of alcohols in solid-phase organic synthesis.     

Trityl isothiocyanate support for solid-phase synthesis

Trityl isothiocyanate resin [1], prepared from commercially available trityl chloride resin, is a useful precursor of the trityl thiosemicarbazide resin [2]. This resin can be employed in the solid-phase synthesis of a variety of supported isatin beta-thiosemicarbazones [4] and their Mannich derivatives [6]. A variety of thioureas [7] can be easily prepared by the reaction of [1] with amines. The supported thioureas are directly and efficiently converted to 2-aminothiazole-5-carboxylates [8] by reaction with methyl 2-chloroacetoacetate.     

Sulfonated and sulfoacylated poly(styrene-divinylbenzene) copolymers as packing materials for cation chromatography

Three different types of cation exchangers were produced from four basic poly(styrene-divinylbenzene) substrates with different properties. Porous PS-DVB resin beads were functionalized by sulfonation and sulfoacylation under various conditions to produce sulfonated resins with exchange capacities of 0.03-1.80 mM g(-1). The matrix with 50% of cross-linking is most suitable for updating by the proposed technique. Sulfuric and chlorosulfonic acids were used as the reagents for sulfonation. The sulfonating conditions, capacities, and the technique of the synthesis are given. The effects of parameters of the sulfonation reaction and the composition of the reactionary mixture on ion-exchange capacity of the sorbents were investigated. Selectivity and efficiency of the separation of some inorganic cations and derivatives of amines and hydrazines on the resins obtained are compared by ion chromatography with conductometric detection. As a result, the sulfoacylated resin was proved more efficient for the separation of these analytes. The resolution of the analytes strongly depends on the degree of functionalization. The best performance about 19,000 plates m(-1) was obtained using the sulfopropionylated beads with an ion-exchange capacity of 0.3 mM g(-1). The prepared sulfoacylated cation exchanger was compared with the commercially available Dionex CS-12 packing material. It was found that the separation of alkaline ions and 1,1-dimethylhydrazine (UDMH) were much better that those for the commercial material.