Labile/inert metal species in aquatic humic substances: an ion-exchange study

Summary An ion-exchange procedure has been developed for the analytical fractionation of metals (e.g. Al, Co, Cu, Fe, Mn, Ni, Pb, Zn) forming labile/inert complexes with aquatic humic substances (HS) isolated (XAD 2, XAD 8, ultrafiltration) from bog, forest, ground and lake water. Using 1-(2-hydroxyphenylazo)-2-naphthol groups immobilized on cellulose (Cellulose HYPHAN) as chelating collector (batch and column procedure, resp.) for reactive metal fractions in dissolved HS, the kinetics and the degree of separation (referred to the total metal content) serve for the operational characterization of the metal lability. According to the separation kinetics (96 h), mostly the reactivity order Mn>Zn>Co>Pb>Ni>CuAl>Fe is observed for the above metals in HS, resulting in recoveries of >98% for Mn and Zn, but strongly varying for the other metals (e.g., 44–95% Cu, 18–84% Fe). By means of cellulose HYPHAN four metal fractions (e.g. Cu) can be distinguished kinetically: (a) about 50% of Cu freshly complexed with HS are directly exchanged (2nd order kinetics, k=0.275 1 · mol^–1 · s^–1) followed by (b) a less labile fraction (20–30%) of 1st to 2nd order exchange; (c) a hardly reactive fraction (5–10%) revealing uniform half times t_1/2 of 25 h closes the Cu exchange from HS. Moreover the Cu fraction (d), being exchange-inert in HS, amounts to 5–10% and increases by slow transformation processes of the formed HS/Cu species.     

Determination of heavy metal complexes with humic substances by HPLC/ICP-MS coupling using on-line isotope dilution technique

An isotope dilution mass spectrometric (IDMS) method has been developed for the simultaneous determination of the complexes of 11 heavy metals (Ag, Cd, Cu, Mo, Ni, Pb, Tl, U, W, Zn and Zr) with humic substances (HS) by coupling HPLC with ICP-MS and applying the on-line isotope dilution technique. The HPLC separation was carried out with size exclusion chromatography. This HPLC/ICP-IDMS method was applied to samples from a brown water, ground water, sewage and seepage water as well as for a sample containing isolated fulvic acids. The total contents of heavy metals and of their complexes were analyzed in these samples with detection limits in the range of 5–110 ng/L. The analysis of heavy metal/HS complexes from the different waters resulted in characteristic fingerprints of the distribution pattern of heavy metals in the separated HS fractions. A comparison between the total heavy metal concentrations and their portions bound to humic substances showed distinct differences for the various metals. Simultaneous ¹²C detection was used for the characterization of HS complexes not identified by UV detection and for the determination of relative DOC concentrations of chromatographic peaks. Received: 21 February 1997 / Revised: 27 May 1997 / Accepted: 28 May 1997     

Lability of nanoparticulate metal complexes in electrochemical speciation analysis

Lability concepts are elaborated for metal complexes with soft (3D) and hard (2D) aqueous nanoparticles. In the presence of a non-equilibrium sensor, e.g. a voltammetric electrode, the notion of lability for nanoparticulate metal complexes, M-NP, reflects the ability of the M-NP to maintain equilibrium with the reduced concentration of the electroactive free M²⁺ in its diffusion layer. Since the metal ion binding sites are confined to the NP body, the conventional reaction layer in the form of a layer adjacent to the electrode surface is immaterial. Instead an intraparticulate reaction zone may develop at the particle/medium interface. Thus the chemodynamic features of M-NP complexes should be fundamentally different from those of molecular systems in which the reaction layer is a property of the homogeneous solution (μ?=?(D _M/k _a ^′)^1/2). For molecular complexes, the characteristic timescale of the electrochemical technique is crucial in the lability towards the electrode surface. In contrast, for nanoparticulate complexes it is the dynamics of the exchange of the electroactive metal ion with the surrounding medium that governs the effective lability towards the electrode surface.     

Electrochemical chiral recognition of tryptophan using a glassy carbon electrode modified with β-cyclodextrin and graphene

We report on a method for electrochemical enantioselective recognition of tryptophan (Trp) enantiomers. It is based on competitive host-guest interaction between a deoxy-(2-aminoethylamino)-β-cyclodextrin (CD) bound to graphene nanosheets and the Cu(II) complexes of the Trp enantiomers via a ligand exchange mechanism. Chiral recognition was investigated via cyclic voltammetry and electrochemical impedance spectroscopy. The results reveal that the CD bound to graphene displays a stronger interaction with the Cu(II) complex of L-Trp than to that of D-Trp. The method was applied to the determination of the ratio of Trp enantiomers in mixtures.

Mass spectrometric investigations of the kinetic stability of chromium and copper complexes with humic substances by isotope-labelling experiments

Isotope-labelling exchange experiments were carried out to investigate the kinetic stability of Cr(III) complexes with humic substances (HS). To compare the results with those of an ion, not expected to form kinetically stable HS complexes with respect to its electron configuration, Cu(II) was investigated under the same conditions. HS solutions of different origin were therefore spiked with ⁵³Cr(III) or ⁶⁵Cu(II) after saturation of HS with chromium and copper of natural isotopic composition. In fractions of metal/HS complexes with different molecular weight, obtained by ultrafiltration and HPLC/ICP-MS using size exclusion chromatography (SEC), respectively, the isotope ratios of chromium and copper were determined by ICP and thermal ionisation mass spectrometry. Distinct differences in the isotopic composition of chromium were found in the permeate of the ultrafiltration compared with the corresponding unseparated solution, which indicates kinetically stable Cr(III)/HS complexes. On the other hand, the copper isotopic composition was identical in the permeate and the unseparated solution, which shows that a total exchange of Cu²⁺ ions took place between free and HS complexed copper ions. The SEC/ ICP-MS experiments also resulted in a different isotopic distribution of chromium in the chromatographically separated complexes whereas the copper complexes, separated by SEC, showed identical isotopic composition. The kinetic stability of Cr(III)/HS complexes could be explained by the d³ electron configuration of Cr³⁺ ions, a fact which is well known from classical Cr(III) complexes, and influences substantially the mobility of this heavy metal in the environment.     

Analytical fractionation of aquatic humic substances and their metal species by means of multistage ultrafiltration

The molecular-size fractionation of aquatic humic substances (HS) and their metal species by means of a novel sequential-stage ultrafiltration (UF) device equipped with five appropriate ultramembranes (1, 5, 10, 50 and 100 kD) is described. First of all, the concentration dynamics of macromolecules, particulary HS, during five-stage UF and its subsequent washing step has been modelled. Based on these results, the fractionation of aquatic HS (from ground and bog water) by means of multistage UF has been optimized for an analytical scale (10 ml sample, 1 mg/ml HS, 10 ml washing solution, pH 6.0). The molecular size-distribution of selected aquatic HS (BOC 1/2 from the DFG-Versuchsfeld Bocholt, VM 5 from Venner Moor, Germany) studied by five-stage UF exhibited strong systematic influences of the procedure used for their isolation. The molecular-size distribution of HS obtained by on-line UF and gel permeation chromatography (GPC) showed a satisfactory agreement in the range 1–50 kD. Moreover, when interrupting multistage UF for > 48 h a slow transformation in the HS samples has been found as gradually additional HS fractions of < 1 kD have been formed. Besides unloaded HS molecules, the molecular-size distribution of freshly formed metal species of HS (1.0 mg metal/g HS of Al(III), Cd(II), Cu(II), Fe(III), Mn(II), Ni(II), Pb(II), Zn(II), each) has been characterized by multistage UF as a function of pH-value, degree of loading and complexation time. Metal determinations as carried out by flame AAS, showed that considerable metal fractions in HS especially are present in molecules > 50 kD, which seemed to be rather acid-inert. With complexation times of < 2 days a transient shift of the molecular size distribution of both HS and their metal species (e.g., Al(III), Fe(III) to higher values (> 10 kD) has been found.     

Some Colloidal and Chemical Aspects of Biotransformation of Heavy Metal Citrate Complexes

It was established that chemically stable water-soluble citrate complexes of heavy metals, which are widespread forms of their occurrence under natural conditions, can be mineralized in the course of metabolism of citrate ligand by Basillus cereus AUMC 4368 metallophilic bacterial culture. Biodegradation of metal citrate complexes is not directly related to their stability constants and corresponds to the Ca (Mg, Sr) > Fe(III) > Zn (Cu, Ni, Co, Cd) > U(VI) series. As a result of biomineralization of water-soluble metal citrate complexes, pH of dispersion medium increases and water-insoluble salts, mainly carbonates and hydroxides, can be formed; correspondingly, the disperse state of metals can be changed. Exception is uranium(VI) that forms (at pH 8) water-soluble stable uranyl carbonate complex. It was shown that the bound forms of metals (water-soluble complexes, insoluble precipitants) are nontoxic for microorganisms.     

Thermodynamics of adsorption of acetone on active carbon supported metal adsorbents

Adsorption of acetone on active carbon and active carbon supported metals (Ni, Cu, Zn and Cd) have been studied as a function of temperature. Thermodynamic parameters such as G ⁰, H ⁰, and S ⁰ are calculated from virial and Langmuir isotherm expressions. It is observed that active carbon supported metals have more adsorption affinity for acetone as compared to active carbon. Results show that the increase in adsorption affinity for active carbon supported metals is not due to configurational factors affecting the entropy of adsorption, but because of enhanced enthalpy of adsorption. XRD spectra show that active carbon supported metals adsorbents are amorphous and metal residues are present on the surface of active carbon in its reduced form. From adsorption data, isosteric heats and molar entropies of adsorption were calculated as a function of coverages and temperature. The values of isosteric heats of adsorption were found to be higher for active carbon supported metals, which may be due to the chemisorption of adsorbate molecules with metal sites present on the surface of active carbon. The extent of coordination of adsorbate molecules with metal sites is discussed on the basis of the acidic character of metal.     

Mass spectrometric investigations of the kinetic stability of chromium and copper complexes with humic substances by isotope-labelling experiments

Isotope-labelling exchange experiments were carried out to investigate the kinetic stability of Cr(III) complexes with humic substances (HS). To compare the results with those of an ion, not expected to form kinetically stable HS complexes with respect to its electron configuration, Cu(II) was investigated under the same conditions. HS solutions of different origin were therefore spiked with ⁵³Cr(III) or ⁶⁵Cu(II) after saturation of HS with chromium and copper of natural isotopic composition. In fractions of metal/HS complexes with different molecular weight, obtained by ultrafiltration and HPLC/ICP-MS using size exclusion chromatography (SEC), respectively, the isotope ratios of chromium and copper were determined by ICP and thermal ionisation mass spectrometry. Distinct differences in the isotopic composition of chromium were found in the permeate of the ultrafiltration compared with the corresponding unseparated solution, which indicates kinetically stable Cr(III)/HS complexes. On the other hand, the copper isotopic composition was identical in the permeate and the unseparated solution, which shows that a total exchange of Cu²⁺ ions took place between free and HS complexed copper ions. The SEC/ ICP-MS experiments also resulted in a different isotopic distribution of chromium in the chromatographically separated complexes whereas the copper complexes, separated by SEC, showed identical isotopic composition. The kinetic stability of Cr(III)/HS complexes could be explained by the d³ electron configuration of Cr³⁺ ions, a fact which is well known from classical Cr(III) complexes, and influences substantially the mobility of this heavy metal in the environment. Received: 7 December 1998 / Revised: 25 March 1999 / Accepted: 27 March 1999     

Analytical fractionation of labile metals in selected groundwater humic substances by means of chelating ion-exchanger

Summary Trace metals remaining in humic substances (HUS) after their acidic isolation (XAD 2) from aquatic sources may preferably be bound in inert form. In the present study, the reactivity (lability) of such a trace metal fraction (e.g. Cu, Fe, Mn, Zn) in selected groundwater HUS (BOC 1 and 3 from the DFG Versuchsfeld Bocholt, FRG) is characterized by its different separation behaviour towards a chelating ion-exchanger (e.g. Hyphan) using a time-controlled sequential batch procedure (96 h). Under standardized conditions, the kinetics and the degree of the ion-exchange reaction serve as parameters for the operational evaluation of metal lability in the above mentioned HUS. Surprisingly, according to the above ion-exchange procedure, about 50% of the total Fe, 81 (95)% Cu, 65 (97)% Mn, 69 (97)% Ni and 82 (95)% Zn in BOC 1 (BOC 3) proved to be bound in labile form. However, 20 to 30% of the labile metal fraction only react following very slow first order kinetics (half-time 24 h). In contrast, trace metals freshly bound to BOC 1 are quantitatively recovered by the collector Hyphan within 1 to 2 h, with the exception of Fe. Moreover, in this way HUS samples can be purified for molecular spectroscopy investigations (e.g. NMR, ESR, fluorescence) which are highly sensitive to metal interferences.     

Approach combining on-line metal exchange and tangential-flow ultrafiltration for in-situ characterization of metal species in humic hydrocolloids

This paper deals with the development and optimization of an analytical procedure using ultrafiltration and a flow-injection system, and its application in in-situ experiments to characterize the lability and availability of metal species in humic-rich hydrocolloids. The on-line system consists of a tangential flow ultrafiltration device equipped with a 3-kDa filtration membrane. The concentration of free ions in the filtrate was determined by atomic-absorption spectrometry, assuming that metals not complexed by aquatic humic substances (AHS) were separated from the complexed species (M–AHS) retained by the membrane. For optimization, exchange experiments using Cu(II) solutions and AHS solutions doped with the metal ions Ni(II), Mn(II), Fe(III), Cd(II), and Zn(II) were carried out to characterize the stability of the metal–AHS complexes. The new procedure was then applied in-situ at a tributary of the Ribeira do Iguape river (Iguape, São Paulo State, Brazil) and evaluated using the ions Fe(III) and Mn(II), which are considered to be essential constituents of aquatic systems. From the exchange between metal–natural organic matter (M–NOM) and the Cu(II) ions it was concluded that Cu(II) concentrations >485 μg L^?1 were necessary to obtain maximum exchange of the complexes Mn–NOM and Fe–NOM, corresponding to 100% Mn and 8% Fe. Moreover, the new analytical procedure is simple and opens up new perspectives for understanding the complexation, transport, stability, and lability of metal species in humic-rich aquatic environments.     

Thermal decomposition kinetics of polymeric complexes of copper(II) and mercury(II) with N,N′-bis(dithiocarboxy)piperazine

The thermal decomposition behaviour of polymeric complexes of Cu(II) and Hg(II) with N,N-bis(dithiocarboxy)piperazine is investigated in air by thermogravimetric (TG), derivative thermogravimetric (DTG) and differential thermal analysis (DTA) techniques. The kinetic parameters (non-isothermal method) for their decomposition have been evaluated by graphical as well as by least-squares methods. The equations of Coats-Redfern, Freeman-Carroll and Horowitz-Metzger have been applied. The results indicate that the values ofE,A and S obtained by these three different methods agree well. It was also found that the decomposition of these metal chelates follow first-order kinetics.

---

Zusammenfassung Mittels TG, DTG und DTA wurde das thermische Zersetzungsverhalten von Polymerkomplexen aus Cu(II) bzw. Hg(II) mit N,N-Bis(dithiocarboxy)piperazin an Luft untersucht. Für ihre Zersetzung (nichtisotherme Methode) wurden die kinetischen Parameter sowohl graphisch als auch durch Methoden mit den kleinsten Fehlerquadraten ermittelt. Dabei wurden die Gleichungen von Coats-Redfern, Freeman-Carroll und von Horowitz-Metzger angewendet. Alle drei Verfahren zeigen übereinstimmende Resultate fürE, A undS. Es wurde weiterhin gefunden, daß diese Metallchelate einer Reaktion erster Ordnung unterliegen.

---

---

The authors are thankful to Prof. C. G. R. Nair, Head of the Department of Chemistry, University of Kerala and Dr. M. P. Kannan, Department of Chemistry, University of Calicut for some helpful discussions.     

Investigation of the kinetics of exchange of water in Mn(Fe)-ethylenediamine-N,N′-disuccinic acid systems by nuclear magnetic relaxation

The number of water molecules in the complexes and the nature of their interaction with the central ions and with the active groups of the ligand were established by investigation of the kinetics of the exchange of water in Mn(Fe)-edds systems by nuclear magnetic relaxation. The Mn-edds·nH₂O complex contains three molecules of water, one of which is bound to the manganese ion while the other two are bound to the carboxyl groups of the edds. In the Fe-edds·nH₂O complex two water molecules are bound to the central ion and one to the carboxyl group of the edds. The mechanism of the exchange processes, which have intermolecular and intramolecular character, was established. The values of the kinetic parameters E_a, H and S indicate a preference for the S_N2 mechanism of exchange. The denticity and the structure of the complexes vary with variation of temperature.Institute of General and Inorganic Chemistry, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 27, No. 4, pp. 506–512, July–August, 1991. Original article submitted July 10, 1987.     

Analytical fractionation of aquatic humic substances by metal affinity chromatography on iron(III)-coated cellulose

The chromatographic fractionation of aquatic humic substances (HS) onto iron(III)-coated cellulose (Cell-Fe(III)) as a metal-loaded adsorbent is described, analogously to the separation principle of the well-established metal affinity chromatography (MAC). For that purpose the sorption of HS from different aquatic origin on that collector was characterized by their kinetics and equilibrium distribution coefficients Kd. Based on Kd values of 10³ to 10⁴,mL/g, and fast sorption kinetics a preparative HPLC procedure, using stepwise increased pH-values (pH 8–12.5, borate buffer) as an eluent, was developed for the fractionation of dissolved HS (up to 7 fractions of different amount). The fractions obtained by this MAC procedure from selected aquatic HS samples were different in their Cu(II) complexation capacity, absorbance ratio E_{265 nm}/E_{365 nm} and Fourier transform infrared spectra. Received: 14 June 1999 / Revised: 6 August 1999 / Accepted: 10 August 1999     

Development of a new analytical approach based on cellulose membrane and chelator for differentiation of labile and inert metal species in aquatic systems

A new procedure was developed in this study, based on a system equipped with a cellulose membrane and a tetraethylenepentamine hexaacetate chelator (MD-TEPHA) for in situ characterization of the lability of metal species in aquatic systems. To this end, the DM-TEPHA system was prepared by adding TEPHA chelator to cellulose bags pre-purified with 1.0 mol L⁻¹ of HCl and NaOH solutions. After the MD-TEPHA system was sealed, it was examined in the laboratory to evaluate the influence of complexation time (0-24 h), pH (3.0, 4.0, 5.0, 6.0 and 7.0), metal ions (Cu, Cd, Fe, Mn and Ni) and concentration of organic matter (15, 30 and 60 mg L⁻¹) on the relative lability of metal species by TEPHA chelator. The results showed that Fe and Cu metals were complexed more slowly by TEPHA chelator in the MD-TEPHA system than were Cd, Ni and Mn in all pH used. It was also found that the pH strongly influences the process of metal complexation by the MD-TEPHA system. At all the pH levels, Cd, Mn and Ni showed greater complexation with TEPHA chelator (recovery of about 95-75%) than did Cu and Fe metals. Time also affects the lability of metal species complexed by aquatic humic substances (AHS); while Cd, Ni and Mn showed a faster kinetics, reaching equilibrium after about 100 min, and Cu and Fe approached equilibrium after 400 min. Increasing the AHS concentration decreases the lability of metal species by shifting the equilibrium to AHS-metal complexes. Our results indicate that the system under study offers an interesting alternative that can be applied to in situ experiments for differentiation of labile and inert metal species in aquatic systems.     

Biosorption of copper(II) and cadmium(II) by a novel exopolysaccharide secreted from deep-sea mesophilic bacterium

The biosorption behaviors and mechanisms of a novel exopolysaccharide (EPS), which is secreted by a mesophilic bacterium (namely Wangia profunda (SM-A87)) isolated from deep-sea sediment, for heavy metals Cu(II) and Cd(II) have been studied in this paper. The effects of SM-A87 EPS concentration, solution pH and ionic strength on the metal uptake were investigated by employing batch adsorption techniques, respectively. The optimum biosorption capacities were observed at pH 5.0 for Cu(II) with 48.0 mg/g and pH 6.0 for Cd(II) with 39.75 mg/g, respectively. Addition of salts decreased Cu(II) or Cd(II) uptake in the order of K⁺ < Na⁺ < Ca²⁺. Langmuir and Freundlich models were employed to describe the biosorption equilibrium data, indicating the favorable biosorption occurs and larger biosorption capacity and intensity for Cu(II) than for Cd(II). The biosorption kinetics for both metals can be well described by pseudo-second-order kinetic model, compared with pseudo-first-order and intraparticle diffusion kinetic models. The competitive biosorption was also studied, indicating that in two-component solution with different metal ratios, the selective biosorption of SM-A87 EPS for Cu(II) was much higher than for Cd(II). The Fourier transform infrared spectroscopy (FT-IR) analysis indicated possible functional groups (e.g., OH, COO and COC) of SM-A87 EPS involved in metal biosorption process, which indicated the potential of using SM-A87 EPS as an effective sorbent for Cu(II) or Cd(II) removal from water.     

π-Arene complexes of the group VIII transition metals

Summary Synthetic methods, structural and chemical aspects of Group VIII ⁶-arene complexes have been reviewed. A section on metal vapor syntheses of these -arene complexes -has been included. -Arene complexes of Group VIII metals in all oxidation states (0, +1, +2, +3) are discussed. Particular emphasis on the -arene ligands lability has been made, and the resultant rich chemistry of the complexes outlined, including catalytic properties.     

Synthesis,characterization and biological analysis of transition metal complexes with macro cyclic ligands derived from adipic acid,ethylenediamine with diethyloxalate and diethylmalonate

Macro-cyclic ligands from adipic acid, ethylenediamine with diethyloxalate and diethylmalonate and their respective metal complexes of Mn(II), Co(II), Ni(II), Cu(II), and Zn(II) with macro cyclic ligands (LO) and (LM) L [N,N′-bis(2-aminoethyl)hexanediamide] were synthesized successfully. These metal complexes were characterized by Fourier transform infrared, ultraviolet visible spectrometry, proton nuclear magnetic resonance spectroscopy, and mass Spectrometry, CHNS and thermogravimetric analysis. The elemental analysis confirms the structures for Mn(II), Co(II) and Ni(II) complexes similar to octahedral geometry, Cu(II) complexes as a square planar geometry and Zn(II) complexes in the tetrahedral geometry. The molar conductivities of all the metal complexes were taken in 10^?3 M DMSO, and values of all the metal complexes showed their electrolytic nature which indicates the presence of chloride ions. Thermal analysis supports as the metal complexes are thermally stable. The result of antimicrobial activity against various microorganisms confirms that the metal complexes are potent bactericides and fungicides than the ligand. Metal complexes of LO with Cu(II) and Zn(II) were found to be highly active against S. typhimurium than the complexes of LM.

Graphical abstract

Open image in new window

     

Tribochemically active chelate complexes of salicylideneimines

N-Alkylsalicylideneimines and their complexes with 3d metals were obtained by chemical (from metal salts) and electrochemical methods (from metals in the zero oxidation state). The compounds obtained were characterized by IR and ¹H NMR spectroscopy and X-ray diffraction analysis. According to crystallographic data, nickel bis(chelate) exists in the trans-planar configuration. A friction test revealed that the tribotechnical characteristics of lubricating formulations are substantially enhanced in the presence of N-alkylsalicylideneiminates.