Synthesis of ZnO nanospheres with uniform nanopores by a hydrothermal process

ZnO nanospheres were successfully synthesized by a hydrothermal process (S1 sample) and a wet-chemical method (S2 sample). Following synthesis, calcination treatment at 450 °C was performed for the sample prepared by the wet-chemical method (S3 sample). All of the samples possessed a regular spherical shape. A polycrystalline wurtzite structure was confirmed in the S1 and S3 samples by X-ray diffraction and selected area electron diffraction, whereas a mixture of ZnO nanoparticles and amorphous materials was observed in the sample S2. The surface area and pore structure of the samples were investigated by nitrogen adsorption–desorption measurements. Uniform nanopores with a diameter of 4.07 nm were present in the S1 sample while a broad pore size distribution was obtained for the S2 and S3 samples. The highest surface area was obtained for the S1 sample and a possible formation mechanism was studied.     

Characterization of nanoporous carbons by combining CO2 and H2 sorption data with the Monte Carlo simulations

The Monte Carlo method in its grand ensemble variant (GCMC) is used in combination with experimental data in order to characterize microporous carbons and obtain the optimal pore size distribution (PSD). In particular, the method is applied in the case of AX-21 carbon. Adsorption isotherms of CO₂ (253 and 298 K) and H₂ (77 K) up to 20 bar have been measured, while the computed isotherms resulted from the GCMC simulations for several pore widths up to 3.0 nm. For the case of H₂ at 77 K quantum corrections were introduced with the application of the Feynman-Hibbs (FH) effective potential. The adsorption isotherms were used either individually or in a combined manner in order to deduce PSDs and their reliability was examined by the ability to predict the experimental adsorption isotherms. The combined approach was found to be capable of reproducing more accurately all the available experimental isotherms.     

Studies on ordered mesoporous materials for potential environmental and clean energy applications

Two series of ordered mesoporous materials, SBA-15 silica and CMK-3 carbon were synthesized. The ordered nanostructure of these materials was confirmed by TEM and XRD analysis. Structural parameters including the specific surface area, pore volume and pore size distribution were determined on the basis of nitrogen adsorption data at 77 K. Potential applications of these materials were explored in relation to the CO₂ sequestering, methane storage and fuel desulfurization. Initial studies of both materials showed their usefulness for environmental and clean energy applications. SBA-15 modified with triethanolamine showed a very good adsorption selectivity for CO₂ while its adsorption reversibility was retained. Also, this material after CuCl deposition was useful for removal of fuel thiophenes. However, CMK-3 was shown to be promising material for storage of natural gas. As high as 41 wt.% of methane was stored in this material in the presence of appropriate amount of water.     

低温泵用椰基活性炭材料的选择和比较

为了选择用于核聚变研究领域中在氢、氦气环境下的低温吸附泵所用的吸附剂,在初步筛选基础上,比对了4种椰基活性炭材料。采用扫描电镜对材料微观结构进行了扫描,用比表面积及孔径分析仪测定了等温吸附性能,最终获得了活性炭样本的比表面积、微孔比表面积份额、不同孔径所对应的孔容等性能数据;通过对实验结果的比对分析,为筛选适用于核聚变研究环境下低温吸附泵使用的吸附剂材料,提供了重要的实验数据。     

Preparation and characterization of porous DVB copolymers and their applicability for adsorption (solid-phase extraction) of phenol compounds

Using DVB, three new porous copolymers in the form of microspheres were prepared, characterized and used as adsorbents for phenol and its chlorinated derivatives. As the monomers: 4,4′-bis(maleimidodiphenyl)methane (BM), 2,3-bis(2-hydroxy-3-methylacryloyloxy-propoxy)naphthalene (2,3-NAF) and 2,3-epoxypropyl methacrylate (GLY) were used. All the studied materials were synthesized under the same conditions by means of suspension copolymerization. The DVB copolymers were characterized by elemental analysis, FTIR spectroscopy, TG and DSC analyses and N₂ sorption. The off-line solid-phase extraction method (SPE) was used to estimate sorption properties of the copolymers. The results show that the newly obtained materials are mesoporous but their shape of pores and chemical structures are different. BM-DVB and GLY-DVB are characterized by slit-shaped pores and wide pore size distribution. 2,3-NAF-DVB also possesses slit pores but distribution of pore size is narrower. Of those studied BM-DVB is the most interesting material. It has good sorption properties and heat resistance.     

Study of silica templates in the rice husk and the carbon–silica nanocomposites produced from rice husk

Carbon–silica nanocomposites obtained by rice husk carbonization in a fluidized-bed reactor using a deep oxidation copper–chromium catalyst were studied. Dispersion characteristics of the silica phase in these systems were determined by small-angle X-ray scattering (SAXS) using the full contrast technique. SiO₂ was found in the initial rice husk as compact nanoparticles having a wide size distribution. This distribution consists of a narrow fraction with particle sizes from 1 to 7 nm and a wider fraction with particle sizes from 8 to 22 nm. Oxidative heat treatment of rice husk in a fluidized bed in the presence of the catalyst decreased the fraction of small SiO₂ particles and increased the fraction of large ones. It was demonstrated that the particle size of silica in the carbon matrix can be determined selectively for deliberate design of porous carbon materials with desired properties.     

Synthesis and properties of new nitrogen-doped nanostructured carbon materials obtained by templating of mesoporous silicas with aminosugars

The negative templating synthesis process has been applied to prepare nanostructured carbon materials with a high nitrogen content. SBA-15 silica template was impregnated with the following carbon precursors: sucrose, glucose and amino-glucose. The structure of the materials was investigated by SAXS, WAXS and TEM. Nitrogen functions were analyzed by XPS and the textural parameters of the carbons were studied by nitrogen and CO₂ adsorption. X-ray and TEM studies confirmed that a pore nanostructure is inherited from the silica templates. XPS analysis showed that the nitrogen content of the materials can be controlled between 2 and 5 wt% and that N atoms are strongly bonded in the carbon structure in heterocycles or nitrile functions. An important result is that these nanostructured carbon materials exhibits interesting textural properties with BET surface areas ranging between 1000 and . Moreover, the study of the influence of nitrogen on the textural and structural parameters of the resulting carbon materials shows that nitrogen plays an active role during the synthesis process. This observation is also supported by the speciation of nitrogen in the nanostructured carbon materials.     

Only Ku-band microwave absorption by Fe3O4/ferrocenyl-CuPc hybrid nanospheres

A novel kind of hybrid nanospheres made of Fe₃O₄ and ferrocenyl-CuPc (FCP) was prepared via effective solvothermal method and performed microwave absorptivity only in Ku-band with minimum reflection loss of −25 dB at 16.0 GHz corresponding to absorbing about 99.7% content of microwave. Scanning electron microscopy images indicated that the nanospheres with uniform particle size distribution have the average diameter of 135 nm. Due to the synergistic reaction between magnetic ferrocenyl-CuPc and Fe₃O₄, the hybrid nanospheres showed novel electromagnetic properties. The real part of complex permittivity of hybrid nanospheres remains stable in the range of 0.5–12.0 GHz and has a large fluctuation at 16.5 GHz. Moreover, the dielectric loss of hybrid nanospheres also appeared a sharp peak at 16.3 GHz with the value of 2.7. The specific gravity of hybrid nanospheres is about 2.08. On the basis of these results, the novel hybrids are believed to have potential applications in the microwave absorbing area in Ku-band.     

Preparation of activated carbons from used tyres by gasification with steam and carbon dioxide

Activated carbons were prepared from waste tyres by gasification with steam and carbon dioxide and their characteristics were investigated. A two-stage activation procedure (pyrolysis at 800 °C in N₂ atmosphere, followed by steam or carbon dioxide activation) was used for the production of activated samples. The effect of the activation temperature (750-900 °C) and the activation time (1-3 h) on the surface characteristics of the prepared carbon was investigated. Carbons produced to different degrees of burn-off were characterized by means of their nitrogen adsorption isotherms at 77 K. In both sets of experiments, the mesopore, micropore volume, and BET surface area increased almost linearly with the degree of activation. For burn-off values lower than 53%, the steam activation produced carbons with a narrower and more extensive microporosity and higher BET and external surface area than the carbon dioxide activation. As the activation proceeds (burn-off > 53%), a strong development of the mesoporosity in the carbons was observed and the micropores size distribution revealed broader micropores, that is, a more heterogeneous distribution.     

Direct synthesis of mesoporous carbon from the carbonization of hydroxypropyl-β-cyclodextrin/silica composite and its catalytic performance

A simple and efficient route is reported for the synthesis of mesoporous carbon materials by directly carbonizing hydroxypropyl-β-cyclodextrin-silica composites. The resulting carbon materials, with uniform wormlike mesoporous structure and certain degree graphitic phase characteristics in porous wall, possess narrow pore size distribution, high surface area (>1000 m² g⁻¹) and pore volume (>1.2 cm³ g⁻¹). It is worth mentioning that the carbon materials have high catalytic activity for the reduction of p-nitrotoluene using hydrazine hydrate as the reducing agent; moreover, the catalytic activity is not reduced notably after being reused for six times.     

Cationic starch as a precursor to prepare porous activated carbon for application in supercapacitor electrodes

Three activated carbons (ACs) for the electrodes of supercapacitor were prepared from cationic starch using KOH, ZnCl₂ and ZnCl₂/CO₂ activation. The BET surface area, pore volume and pore size distribution of the ACs were evaluated using density functional theory method, based on N₂ adsorption isotherms at 77 K. The surface morphology was characterized with SEM. Their electrochemical performance in prototype capacitors was determined by galvanostatic charge/discharge characteristics and cyclic voltammetry, and compared with that of a commercial AC, which was especially prepared for use in supercapacitors. The KOH-activated starch AC presented higher BET surface area (3332 m² g⁻¹) and larger pore volume (1.585 cm³ g⁻¹) than those of the others, and had a different surface morphology. When used for the electrodes of supercapacitors, it exhibited excellent capacitance characteristics in 30 wt% KOH aqueous electrolytes and showed a high specific capacitance of 238 F g⁻¹ at 370 mA g⁻¹, which was nearly twice that of the commercial AC.     

Comparative study on diameter distribution of single-walled carbon nanotubes using growth templates with different pore sizes: Zeolite-L,ZSM-5, and MCM-41

We report a comparative study on diameter distribution of single-walled carbon nanotubes (SWNTs) grown using nanoporous templates having different pore sizes, namely, zeolite-L, ZSM-5, and MCM-41. The change in the tube diameter based on catalytic film thickness and growth temperature was systematically investigated. We prepared very thin Fe catalyst films with nominal thicknesses of 0.5, 0.7, 1, and 2 Å, and the growth temperature was varied from 850 to 925 °C. We found that the SWNT mean diameter and size distribution width decreased with decreasing catalyst film thickness, growth temperature, and pore sizes of the templates. In addition, all SWNTs grown from the nanoporous templates have narrower diameter distribution compared to the SWNTs grown from SiO₂ planar surface. The obtained results are straightforward and suggest that the template growth has potential for SWNT growth with very narrow diameter distribution.     

Effect of drying technique on the physicochemical properties of sodium silicate-based mesoporous precipitated silica

The conventional drying (oven drying) method used for the preparation of precipitated mesoporous silica with low surface area (>300 m²/g) and small pore volume is often associated with a high production cost and a time consuming process. Therefore, the main goal of this study was to develop a cost-effective and fast drying process for the production of precipitated mesoporous silica using inexpensive industrial grade sodium silicate and spray drying of the precipitated wet-gel silica slurry. The precipitated wet-gel silica slurry was prepared from an aqueous sodium silicate solution through the drop-wise addition of sulfuric acid. Mesoporous precipitated silica powder was prepared by drying the wet-gel slurry with different drying techniques. The effects of the oven drying (OD), microwave drying (MD), and spray drying (SD) techniques on the physical (oil, water absorption, and tapping density), and textural properties (specific BET surface area, pore volume, pore size, and % porosity) of the precipitated mesoporous silica powder were studied. The dried precipitated mesoporous silica powders were characterized with field-emission scanning electron microscopy; Brunauer, Emmett and Teller and BJH nitrogen gas adsorption/desorption methods; Fourier-transform infrared spectroscopy; thermogravimetric and differential analysis; N₂ physisorption isotherm; pore size distribution and particle size analysis. There was a significant effect of drying technique on the textural properties, such as specific surface area, pore size distribution and cumulative pore volume of the mesoporous silica powder. Additionally, the effect of the microwave-drying period on the physicochemical properties of the precipitated mesoporous silica powder was investigated and discussed.     

Enhanced near field mediated nanohole fabrication on silicon substrate by femtosecond laser pulse

Investigation of the process of nanohole formation on silicon surface mediated with near electromagnetic field enhancement in vicinity of gold particles is described. Gold nanospheres with diameters of 40, 80 and 200 nm are used. Irradiation of the samples with laser pulse at fluences below the ablation threshold for native Si surface, results in a nanosized surface modification. The nanostructure formation is investigated for the fundamental (λ = 800 nm, 100 fs) and the second harmonic (λ = 400 nm, 250 fs) of the laser radiation generated by ultrashort Ti:sapphire laser system. The near electric field distribution is analyzed by an Finite Difference Time Domain (FDTD) simulation code. The properties of the produced morphological changes on the Si surface are found to depend strongly on the polarization and the wavelength of the laser irradiation. When the laser pulse is linearly polarized the produced nanohole shape is elongated in the E-direction of the polarization. The shape of the hole becomes symmetrical when the laser radiation is circularly polarized. The size of the ablated holes depends on the size of the gold particles, as the smallest holes are produced with the smallest particles. The variation of the laser fluence and the particle size gives possibility of fabricating structures with lateral dimensions ranging from 200 nm to below 40 nm. Explanation of the obtained results is given on the basis simulations of the near field properties using FDTD model and Mie's theory.     

Synthesis and electrochemical properties of Li4Ti5O12/C composite by the PVB rheological phase method

Spinel Li₄Ti₅O₁₂/C powders were synthesized successfully by a simple rheological phase method using polyvinylbutyral (PVB) as both template and carbon source. The structure and morphology characteristics of the composite were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy and transmission electron microscopy. The XRD results showed that the composite had a good crystallinity. Its average particle size was about 2.1 μm with a narrow size distribution as a result of homogeneous mixing of the precursors. The in situ carbon coating produced by decomposition of PVB played an important role in improving electrical conductivity, thereby enhancing the rate capacity of Li₄Ti₅O₁₂ as anode material in Li-ion batteries. The Li₄Ti₅O₁₂/C composite, synthesized at 800 °C for 15 h under argon, containing 0.98 wt% of carbon, exhibited better electrochemical properties in comparison with the pristine Li₄Ti₅O₁₂, which could be attributed to the enhanced electrical conductive network of the carbon coating on the particle surface.     

Nanoparticles of Iron Nitride Encapsulated in Nitrogen-Doped Carbon Bulk Derived from Polyaniline/Fe2O3 Blends and Its Electrochemical Performance

Iron nitride nanoparticles encapsulated in nitrogen-doped carbon bulk is fabricated by a simple costep nitridation of Fe₂O₃ and carbonization of polyaniline. The microstructure and elemental composition of the materials are analyzed by transmission electron microscope, scanning electron microscope, X-ray diffraction, and X-ray photoelectron spectroscopy. The pore size distribution and specific surface area of the materials are identified using nitrogen adsorption and desorption method. The results illustrate that iron nitride nanoparticles with 5–20 nm in size are uniformly dispersed in the carbon bulk. The presence of carbon bulk effectively prevents the agglomeration of iron nitride nanoparticles, making the electrochemical performance of iron nitride nanoparticles/carbon nitride composite nanomaterials superior to that of pure iron nitride nanomaterials. At a current density of 0.5 A g⁻¹, the specific capacitance (257.5 F g⁻¹) of the iron nitride nanoparticles/nitrogen-doped carbon bulk is much higher than that (119.5 F g⁻¹) of pure iron nitride.     

Fabrication and application of highly ordered mesoporous Co3O4, NiO, and their metals

Highly ordered mesoporous Co₃O₄, NiO, and their metals were synthesized by nanocasting method using there corresponding mesoporous SBA-15 silica as a template. The obtained porous metal oxides have high surface areas, large pore volume, and a narrow pore size distribution. The N₂-adsorption data for mesoporous metal oxides have provided the BET area of 257.7 m² g⁻¹ and the total pore volume of 0.46 cm³ g⁻¹. The mesoporous metals were employed as a catalyst in the synthesis of (S)-3-pyrrolidinol from chiral (S)-4-chloro-3-hydroxybutyronitrile, and a high yield to (S)-3-pyrrolidinol-salt was obtained on the mesoporous Co metal catalyst.     

LiFePO<Subscript>4</Subscript>/C with high capacity synthesized by carbothermal reduction method

The olivine-type LiFePO₄/C cathode materials were prepared via carbothermal reduction method using cheap Fe₂O₃ as raw material and different contents of glucose as the reducing agent and carbon source. Their structural and morphological properties were investigated by X-ray diffraction, scanning electron microscope, transmission electron microscope, and particle size distribution analysis. The results demonstrated that when the content of the carbon precursor of glucose was 16 wt.%, the synthesized powder had good crystalline and exhibited homogeneous and narrow particle size distribution. Even and thin coating carbon film was formed on the surface of LiFePO₄ particles during the pyrolysis of glucose, resulting in the enhancement of the electronic conductivity. Electrochemical tests showed that the discharge capacity first increased and then decreased with the increase of glucose content. The optimal sample synthesized using 16 wt.% glucose as carbon source exhibited the highest discharge capacity of 142 mAh g⁻¹ at 0.1C rate with the capacity retention rate of 90.4% and 118 mAh g⁻¹ at 0.5C rate.     

Characterizing the Evolution of Porosity during Controlled Drug Release

Nuclear magnetic resonance (NMR) techniques have been successfully used to characterize the evolving pore structure of partially soluble pharmaceutical pellets as they absorb water and release soluble components. The restricted diffusivity of water trapped within pellets, which have been immersed in water for differing times, has been measured by pulsed field gradient NMR. These measurements have been used to calculate the surface-to-volume ratio and tortuosity of the pore structure. A one-shot Carr–Purcell–Meiboom–Gill sequence has been used to measure the spin–spin (T ₂) relaxation time of water trapped within the pellets. These data have been regularized and then analyzed by the Brownstein–Tarr model to provide a pore size distribution for the pellets as a function of increasing immersion time. It has been found that pore structure changes significantly as water enters the pellet matrix. Two pellet formulations (herein referred to as placebo and drug-loaded) were studied and showed the same trends of a decreasing surface-to-volume ratio and tortuosity with increasing immersion time. At an immersion time of 10 min, both of these parameters decreased to approximately 70% of their values compared to an immersion time of 2 min. The placebo material tested consistently had both a higher tortuosity and surface-to-volume ratio than the drug-loaded material. At an immersion time of 2 min, the tortuosity for the placebo and drug-loaded materials were about 18 and about 10, respectively, and surface-to-volume ratios of about 6 μm⁻¹ and about 5 μm⁻¹, respectively. The materials tested also show changes in their pore size distribution with immersion time. In both formulations the mean and modal pore sizes increase with immersion time. The placebo material maintains an approximately similar mean and modal pore size, about 2 μm over the timescales studied, suggesting a more symmetric pore size distribution. In the drug-loaded pellets the mean pore size is much higher than the modal pore size, their values being 6.5 and 2.1 μm after 10 min immersion time, respectively. Authors' address: Michael D. Mantle, Department of Chemical Engineering, University of Cambridge, Pembroke Street, Cambridge CB2 3RA, UK