四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

Crystal engineering of photochromic diarylethene single crystals

Photochromic performance of diarylethene single crystals was controlled by crystal engineering using non-covalent aromatic-aromatic interactions as the directional intermolecular force. A diarylethene derivative with two pentafluorophenyl groups, 1,2-bis(2-methyl-5-pentafluorophenyl-3-thienyl)perfluorocyclopentene (1a), formed stoichiometric co-crystals with benzene (Bz) and naphthalene (Np) by aryl-perfluoroaryl interactions. Face-to-face pi-stacking interactions between the pentafluorophenyl groups of 1a and the aromatic molecules are responsible for 2:1 and 1:1 stoichiometric compositions in 1a/Bz and 1a/Np co-crystals, respectively. The diarylethene underwent thermally stable and photoreversible photochromic reactions in a homo-crystal of 1a and co-crystals 1a/Bz and 1a/Np. The absorption spectra of the photogenerated closed-ring isomers varied depending on the conformation of the diarylethene molecules packed in the crystals. The diarylethene 1a also formed 1:1 stoichiometric co-crystals with different kinds of diarylethenes, 1,2-bis(2-ethyl-5-phenyl-3-thienyl)perfluorocyclopentene (2a) and 1,2-bis[2-methyl-5-(1-naphthyl)-3-thienyl]perfluorocyclopentene (3a). Both co-crystals 1a/2a and 1a/3a showed photochromism. Although 1a, 2a, and 3a underwent efficient photocyclization reactions in their homo-crystals, highly selective photocyclization reactions of 2a or 3a were observed in the co-crystals. The selective reactions were confirmed by HPLC and X-ray crystallography. Excited energy transfers from 1a to 2a and from 1a to 3a are considered to occur and cause the selective reactions.     

Boron/nitrogen substitution of the central carbon atoms of the biphenalenyl diradical π dimer: a novel 2e-12c bond and large NLO responses

On the basis of the famous staggered biphenalenyl diradical π dimer 1, the eclipsed biphenalenyl (1a), with no centrosymmetry, was obtained by rotating a layer of 1 by 60° around its central axis. Furthermore, the central carbon atoms of 1 and 1a were substituted by boron and nitrogen atoms to form 2 and 2a with a novel 2e-12c bond. We found that the novel 2e-12c bond is formed by the electron pair of the occupied orbital of the phenalenyl monomer substituted by the nitrogen atom and the unoccupied orbital of the phenalenyl monomer substituted by the boron atom. As a result of the novel 2e-12c bond, 2 and 2a exhibit a fascinating interlayer charge-transfer transition character, which results in a significant difference in the dipole moments (Δμ) between the ground state and the crucial excited state. The values of Δμ for 2 and 2a are 6.4315 and 6.9253 Debye, clearly larger than the values of 0 and 0.0015 Debye for 1 and 1a. Significantly, the boron/nitrogen substitution effect can greatly enhance the first hyperpolarizabilities (β(0) ) of 2 and 2a with a novel 2e-12c bond compared with 1 and 1a with a traditional 2e-12c bond: 0 and 19 a.u. for 1 and 1a are much lower than 3516 and 12272 a.u. for 2 and 2a. Furthermore, the interaction energies (E(int) )of 2 and 2a are larger than those of 1 and 1a, which could be considered as a signature of reliability for the newly designed dimers. Our present work will be beneficial for further theoretical and experimental studies on the properties of molecules with the novel 2e-12c bond.     

Photochromic reactions of diarylethenes in single crystals with intermolecular O--H...N hydrogen-bonding networks

The crystal structures and photochromic performance of a single crystal of a diarylethene derivative possessing carboxyl groups, 1,2-bis(5-carboxyl-2-methyl-3-thienyl)perfluorocyclopentene (1 a), and cocrystals of 1 a with 4,4'-, 2,4'-, and 2,2'-bipyridines were examined. In crystal 1 a, a discrete cyclic structure was observed, in which four 1 a molecules are linked through hydrogen bonds between the carboxyl groups. In the homocrystal, photoreactive and photoinactive conformers of 1 a exist in the ratio of 1:1. In the cocrystals of 1 a with bipyridines, O--HN-type hydrogen bonds between 1 a and pyridyl groups were formed, and all 1 a molecules are fixed in a photoreactive conformation. Both the homocrystal 1 a and the cocrystals showed photochromic performances, and color variation from bluish-violet to cyan was observed, depending on the conformation of the packed diarylethene molecules.     

Reactions of Ruthenium–Allenylidene Complexes Tethering a Cyclopropyl Group

Two cyclopropyl allenylidene complexes [Ru]=CCC(R)(C₃H₅) ([Ru]=[RuCp(PPh₃)₂], Cp=Cyclopentadienyl; R=thiophene ( 2a ) and R=Ph ( 2b )) are prepared from the reactions of [Ru]Cl with the corresponding 1‐cyclopropyl‐2‐propyn‐1‐ol in the presence of KPF₆. Thermal treatment, halide‐anion addition, and palladium‐catalyzed reactions of 2a and 2b all lead to a ring expansion of the cyclopropyl group, giving the vinylidene complexes 4a and 4b , respectively, each with a five‐membered ring. This ring expansion proceeds by C C bond formation between Cβ of the cumulative double bond and a methylene group of the cyclopropyl ring. In the reaction of 2a with pyrrole, consecutive formation of two C C bonds, one between C‐2 of pyrrole and Cγ of 2a and the other between C‐3 of pyrrole and Cα, results in the formation of 6a . The reaction proceeds by addition of pyrrole and 1,3‐proton shifts. The hydrogenation of 2a by NaBH₄ is carried out in different solvents. The cumulative double bonds are reduced regioselectively to give a mixture of 7a and 8a . Interestingly, use of different solvents leads to different ratios of 7a and 8a . Presence of a protic solvent like methanol in dichloromethane or chloroform solution increases the yield of 8a , thus revealing that both the rates of hydroboration and deboronation increase. The structures of two new complexes 4a and 6a have been firmly established by X‐ray diffraction analysis.     

Controlled Dynamic Helicity of a Folded Macrocycle Based on a Bisterephthalamide with a Twofold Z‐Shaped Structure

Dynamic helicity in a folded macrocycle and control of the helical preference are described. We designed macrocycle 1 with a dual mode of folding through the integration of two flexible units that are arranged twice to form a cyclic structure. As a folding unit, we used a terephthalamide skeleton and a Z‐shaped hydrocarbon: the former acted as a control unit to induce a preference of a particular sense of dynamic helicity and the latter was just a spacer. A terephthalamide unit provided a binding site for capturing a ditopic hydrogen‐bonding guest when it adopted helically folded syn forms (M/P). Thus, only the terephthalamide unit controlled the helical sense of dynamic helicity in a folded macrocycle through the supramolecular transmission of chirality upon complexation with a chiral ditopic guest. In addition, chirality on a host could also contribute to the control of the helical preference in a folded macrocycle, which led to exceptionally enhanced chiroptical signals.     

Trichalcogenasumanene ortho‐Quinones: Synthesis,Properties, and Transformation into Various Heteropolycycles

The regioselective transformation of heterobuckybowl trichalcogenasumanenes 1 a , b at peripheral butoxy groups afforded trichalcogenasumanene ortho ‐quinones 2 a , b . Compounds 2 a , b are distinct from 1 a , b in terms of their molecular geometry and electronic state; that is, they have a shallower bowl depth and show absorbance in the NIR region. The reaction of 2 a , b with diamines resulted in a variety of heteropolycycles, including molecular spoon 3 a – 6 a , planar π‐systems 3 b – 6 b , and highly twisted [7‐6‐6]‐fused systems 7 a , b . These new heteropolycycles had different optical/electrical properties: 4 a,b showed hole mobility of approximately 0.002 cm² V⁻¹ s⁻¹, 6 a displayed red emission in both solution and the solid state, and 7 a , b formed tight stacks of the curved π‐surface.     

Synthesis of well-defined polymers with protected silanol groups by atom transfer radical polymerization and their use for the fabrication of polymeric nanoparticles

Copper-mediated atom transfer radical polymerization (ATRP) of a protected silanol group-holding methacrylate, methacryloxypropyltrimethoxysilane (MOPS), was investigated. In a dry condition using carefully distilled solvent and monomer, the polymerization proceeded in a living fashion providing a low-polydispersity polymer with a predicted molecular weight. The ATRP in conjunction with the sequential monomer addition of methyl methacrylate (MMA) and MOPS afforded a block copolymer of the type PMMA-b-poly(MMA-r-MOPS). The heat treatment of a solution of the block copolymer in the presence of a catalytic amount of ammonia gave a polymeric core-shell nanoparticle with a shell of PMMA moieties and a core of the poly(MMA-r-MOPS) blocks cross-linked via the condensation of the trimethoxysilane groups of the MOPS moieties.     

A novel method that improves sensitivity of protein detection in PAGE and Western blot

We have developed a simple and inexpensive method that improves sensitivity of protein and antigen detection in standard PAGE procedures. Our technique uses a sample microloader device with a funnel‐like structure, filled with a 4% stacking gel. When attach to the top of a polyacrylamide slab gel, the proteins in a sample are concentrated by electrophoresis into a small volume as they emerge from the device's narrow outlet. Our microloader has several advantages over previous devices, including simple assembly, high versatility, and absence of cross‐contamination between lanes. Addition of this device to a slab gel results in a fivefold increase in the sensitivity of antigen detection in a Western blot. As a result, less protein is required for loading and signal detection. Our protocol is a straightforward modification of a standard experimental technique, and is especially useful when only limited sample quantities are available.     

Trichalcogenasumanene ortho‐Quinones: Synthesis,Properties, and Transformation into Various Heteropolycycles

The regioselective transformation of heterobuckybowl trichalcogenasumanenes 1 a , b at peripheral butoxy groups afforded trichalcogenasumanene ortho ‐quinones 2 a , b . Compounds 2 a , b are distinct from 1 a , b in terms of their molecular geometry and electronic state; that is, they have a shallower bowl depth and show absorbance in the NIR region. The reaction of 2 a , b with diamines resulted in a variety of heteropolycycles, including molecular spoon 3 a – 6 a , planar π‐systems 3 b – 6 b , and highly twisted [7‐6‐6]‐fused systems 7 a , b . These new heteropolycycles had different optical/electrical properties: 4 a,b showed hole mobility of approximately 0.002 cm² V⁻¹ s⁻¹, 6 a displayed red emission in both solution and the solid state, and 7 a , b formed tight stacks of the curved π‐surface.     

Total synthesis and biological evaluation of (-)apicularen A and analogues thereof

Apicularen A (1) and related benzolactone acylenamines belong to a growing class of novel natural products possessing highly cytotoxic properties. The challenging structure of 1 includes a 10-membered macrolactone ring, a tetrahydropyran system, an o,m-substituted phenol and a doubly unsaturated acyl group attached on the side chain enamine functionality. The total synthesis of apicularen A described herein involves a strategy equivalent to its proposed biosynthesis and entails a reiterative two-step procedure featuring allylation and ozonolytic cleavage to grow the molecule's chain by one acetate unit at a time. The developed synthetic technology was applied to the construction of a series of apicularen A analogues whose biological evaluation established a set of structure-activity relationships in this new area of potential importance in cancer chemotherapy.     

Palladium‐Catalyzed Reductive Coupling Reaction of Terminal Alkynes with Aryl Iodides Utilizing Hafnocene Difluoride as a Hafnium Hydride Precursor Leading to trans‐Alkenes

Herein, we describe a reductive cross‐coupling of alkynes and aryl iodides by using a novel catalytic system composed of a catalytic amount of palladium dichloride and a promoter precursor, hafnocene difluoride (Cp₂HfF₂, Cp=cyclopentadienyl anion), in the presence of a mild reducing reagent, a hydrosilane, leading to a one‐pot preparation of trans‐alkenes. In this process, a series of coupling reactions efficiently proceeds through the following three steps: (i) an initial formation of hafnocene hydride from hafnocene difluoride and the hydrosilane, (ii) a subsequent hydrohafnation toward alkynes, and (iii) a final transmetalation of the alkenyl hafnium species to a palladium complex. This reductive coupling could be chemoselectively applied to the preparation of trans‐alkenes with various functional groups, such as an alkyl group, a halogen, an ester, a nitro group, a heterocycle, a boronic ester, and an internal alkyne.     

Optimisation of a flow injection system with electrochemical detection using the desirability function: Application to the determination of hydroquinone in cosmetics

A procedure is proposed in which the determination of hydroquinone using a flow injection system with electrochemical detection is described. Size and coefficient of variation of the signal are optimised by a desirability function and a central composite design. The robustness of the optimum reached in the optimisation step is evaluated by means a Plackett-Burman design. The optimised FIA system is able to determine hydroquinone with a minimum detectable net concentration of 10 μg l⁻¹ with a false positive probability of 0.05 and a false negative probability less than 0.05. In samples of bleaching cream, the proposed procedure has a recovery of 102.2% with standard deviation of 4.4% and a relative error of 6.2%.     

分子陀螺的设计、合成与组装

近来,科学家设计和合成了系列分子水平的陀螺。类似于儿童的玩具陀螺仪,这种分子陀螺由一个转子、一个定子框架和连接定子和转子的轴组成。定子框架通过自身的刚性结构为中心转子的转动提供足够的内在自由度,得以对内部的转子实施保护。并使得分子陀螺成为一个理想的分子转子。当转子上有偶极距时,则可能在外来电、磁、光的刺激下进行定向转动,成为分子马达。化学家们通过X射线晶体衍射技术、动态核磁技术、理论计算化学、热力学分析等方法表征了分子陀螺的各种特征,并积极探索其潜在的应用价值。本文着重介绍分子陀螺,以及超分子陀螺仪的发展历史以及研究进展。     

适用于针尖增强拉曼技术的Au针尖的研制

采用针尖增强拉曼光谱技术(TERS)研究了刻蚀电位对Au针尖刻蚀效果的影响, 初步探讨了刻蚀过程的机理. 通过监控刻蚀过程中的振荡电流-时间曲线并与扫描电镜得到的结果比较, 发现可以直接利用电流-时间曲线简单地判断刻蚀后针尖的可能形状, 而无需再借助扫描电镜进行表征. 这不但提高了实验效率, 而且还可以避免针尖在转移和电镜表征过程中可能引入的污染. 研究结果表明, 在体积比为1:1的发烟盐酸和无水乙醇的刻蚀液中, 于2.2 V的电压下, 结合电化学方法控制终点可以得到形状对称尖锐的针尖. 这种针尖不但适合于TERS研究, 而且可用作STM针尖和微纳电极并用于其它针尖增强光学技术.     

A Rapid and Efficient Way to Dynamic Creation of Cross‐Reactive Sensor Arrays Based on Ionic Liquids

Based on the simple counterion exchange of ionic liquids, a rapid, facile, and efficient strategy to create a cross‐reactive sensor array with a dynamic tunable feature was developed, and exemplified by the construction of a sensor array for the identification and classification of nitroaromatics and explosives mimics. To achieve a good sensing system with fast response, good sensitivity, and low detection limit, the synthesized ionic liquid receptors were tethered onto a silica matrix with a macro‐mesoporous hierarchical structure. Through the facile anion exchange approach, abundant ionic‐liquid‐based individual receptors with diversiform properties, such as different micro‐environments, diverse molecular interactions, and distinctive physico‐chemical properties, were easily and quickly synthesized to generate a distinct fingerprint of explosives for pattern recognition. The reversible anion exchange ability further endowed the sensor array with a dynamic tunable feature as well as good controllability and practicality for real‐world application. With the assistance of statistical analysis, such as principal component analysis (PCA) and linear discrimination analysis (LDA), an optimized‐size array with a good resolution was rationally established from a large number of IL‐based receptors. The performed experiments suggested that the ionic‐liquid‐based sensing protocol is a general and powerful strategy for creating a cross‐reactive sensor array that could find a wide range of applications for sensing various analytes or complex mixtures.     

链式钴微米六方片的溶剂热合成及磁性

以十二硫醇和聚乙烯吡咯烷酮（PVP）为结构导向剂、乙二醇和乙二胺为混合溶剂,利用溶剂热技术成功地制备了Co粒子,并用XRD、SEM、TEM、HRTEM及SQUID对材料的晶体结构、形貌及磁性进行研究. 结果表明：Co粒子属hcp相,呈六方片状,直径约为2 μm,厚度约为80 nm,大量的六方片相互交叉连接成链式结构,并且六方薄片由更为细小的丝带状的纳米片（厚度约为10 nm）构成;室温下样品表现出良好的铁磁性特征,其饱和磁化强度Ms、剩余磁化强度Mr及矫顽力分别为126.6 emu/g、13.7 emu/g和163.4 Oe.     

Graphene-supported biomimetic catalysts with synergistic effect of adsorption and degradation for efficient dye capture and removal

Design and development of iron porphyrin-based artificial enzymes system have been attracting a lot of attention.Herein,without any toxic reductant and harsh processing,we present a facile one-pot method to fabricate bifunctional catalytic nanocomposites consisting of graphene and hemin by using vitamin C as a mild reduction reagent.The presence of graphene helps the formation of a high degree of highly active and stable hemin on the graphene surface in a monomeric form through theirπ-πstacking interaction.As a result,such nanocomposites possess a superior adsorption capacity and intrinsic peroxidase-like catalytic activity.Moreover,by the combination of their dye adsorption ability,RGOhemin nanocomposites can serve as a suitable candidate for efficient capture and removal of dyes via a synergistic effect.Our findings may pave the way to apply graphene-supported artificial enzymes in a variety of fields,such as environmental chemistry,bionics,medicine,and biotechnology.     

Structural studies of biarylpyridines fluorophores lead to the identification of promising long wavelength emitters for use in fluorescent chemosensors

Fluorescent chemosensors—molecules whose fluorescence emission changes in response to a reversible binding event—require both a substrate binding domain and a reporting fluorophore. Our approach to chemosensor development is based on a combination of a new signaling mechanism and a modular fluorophore synthesis. The latter feature has facilitated detailed study of the properties of polyarylpyridine fluorophores, and has led to the identification of a visibly-emissive pyridine as a promising lead structure for chemosensor development. The results of this study are described herein.     

Quantitative X-Ray Microanalysis of Heterogeneous Materials Using Monte Carlo Simulations

Monte Carlo simulations are used to obtain new results of x-ray microanalysis of sample types frequently encountered in practical analytical situations such as a vertical layer embedded in a homogeneous matrix and a spherical particulate deposited on a substrate. The simulations show that a 10-nm layer of boron in a steel matrix can be imaged using backscattered electrons and detected using x-ray microanalysis with a field emission scanning electron microscope even with an electron beam energy equals to 20 keV and also that these simulations can be useful to estimate the optimum acceleration voltage to perform such analyses. For a carbon spherical particulate located on the top of a gold substrate, it is shown that x-ray emission and electron backscattering are a strong function of the diameter of the particulate and also of the electron beam energy. Finally, a new method to determine the thickness of a thin film deposited on a substrate is proposed that does not require the measurement of the beam current. That technique can also be used for a spherical particulate deposited on a substrate.