2,2′‐Diamino‐6,6′‐diboryl‐1,1′‐binaphthyl: A Versatile Building Block for Temperature‐Dependent Dual Fluorescence and Switchable Circularly Polarized Luminescence

Temperature‐dependent dual fluorescence and switchable circularly polarized luminescence (CPL) are two highly pursued but challenging properties for small organic molecules (SOMs). We herein disclose a triarylborane π‐system based on a 2,2′‐diamino‐6,6′‐diboryl‐1,1′‐binaphthyl scaffold that can serve as a versatile building block for achieving these two properties by simply choosing different amino groups. BNMe₂‐BNaph with less bulky dimethylamino groups displays temperature‐dependent dual fluorescence, and can thus be used as a highly sensitive ratiometric fluorescence thermometer. On the other hand, BNPh₂‐BNaph with bulky diphenylamino groups exhibits intense fluorescence in both solution and in the solid state. A change of solvent from nonpolar cyclohexane to highly polar MeCN not only shifts the CPL position to much longer wavelength but also inverts the CPL sign. In addition, the complexation of BNPh₂‐BNaph with fluoride greatly enhances the CPL intensity.     

Diastereoselective Synthesis of P‐Chirogenic and Atropisomeric 2,2′‐Bisphosphino‐1,1′‐binaphthyls Enabled by Internal Phosphine Oxide Directing Groups

Diphosphine ligands that merge both axial and P‐centered chirality may exhibit superior or unique properties. Herein we report the diastereoselective introduction of P‐centered chirality at the 2‐position of the axially chiral 2′‐(phosphine oxide)‐1,1′‐binaphthyl scaffold. A lithium–bromide exchange reaction of a 2‐bromo‐2′‐(phosphine oxide)‐1,1′‐binaphthyl and treatment with dichlorophosphines followed by a nucleophilic organometallic reagent afforded unsymmetrical 2‐phosphino‐2′‐(phosphine oxide)‐1,1′‐binaphthyls with binaphthyl axial chirality and one or two phosphorus stereocenters with a variety of P substituents. The final diastereomerically pure 2,2′‐bisphosphino‐1,1′‐binaphthyls were obtained by reduction of the phosphine oxide directing group. Preliminary results demonstrated that a ligand with this hybrid chirality could induce higher stereoselectivity in the metal‐complex‐catalyzed asymmetric hydrogenation of a dialkyl ketone.     

Donor‐Induced Helical Inversion of 1,1′‐Binaphthyl Connecting with Two Molybdenum Complexes

An atropisomeric biaryl molecule with a given absolute configuration could present two opposite helical conformations through the rotation around C? C single bond. To the best of our knowledge, the biaryl system is the simplest helical inversion model apart from stereomutation between two enantiomers. Herein, we first report such true helical inversion phenomena of biaryl compounds. Two [Mo^VIO₂(L)]‐type complexes, in which L is a tridentate dioxoanionic pyridine O,N,O‐ligand, are coalesced on the 2,2′,3,3′‐positions of an (R)‐1,1′‐binaphthyl unit and an intramolecular dioxo bridge is formed by two Mo?O???Mo interactions. Exterior strong donors can coordinate to molybdenum to interrupt this dioxo bridge and inversions from negative to positive chirality are explicitly observed by circular dichroism spectroscopy, consistent with single‐crystal X‐ray diffraction analyses.     

Cobalt(II) chloride complexes with 1,1′‐dimethyl‐4,4′‐bipyrazole featuring first‐ and second‐sphere coordination of the ligand

In catena‐poly[[dichloridocobalt(II)]‐μ‐(1,1′‐dimethyl‐4,4′‐bipyrazole‐κ²N²:N^2′)], [CoCl₂(C₈H₁₀N₄)]_n, (1), two independent bipyrazole ligands (Me₂bpz) are situated across centres of inversion and in tetraaquabis(1,1′‐dimethyl‐4,4′‐bipyrazole‐κN²)cobalt(II) dichloride–1,1′‐dimethyl‐4,4′‐bipyrazole–water (1/2/2), [Co(C₈H₁₀N₄)₂(H₂O)₄]Cl₂·2C₈H₁₀N₄·2H₂O, (2), the Co²⁺ cation lies on an inversion centre and two noncoordinated Me₂bpz molecules are also situated across centres of inversion. The compounds are the first complexes involving N,N′‐disubstituted 4,4′‐bipyrazole tectons. They reveal a relatively poor coordination ability of the ligand, resulting in a Co–pyrazole coordination ratio of only 1:2. Compound (1) adopts a zigzag chain structure with bitopic Me₂bpz links between tetrahedral Co^II ions. Interchain interactions occur by means of very weak C—H...Cl hydrogen bonding. Complex (2) comprises discrete octahedral trans‐[Co(Me₂bpz)₂(H₂O)₄]²⁺ cations formed by monodentate Me₂bpz ligands. Two equivalents of additional noncoordinated Me₂bpz tectons are important as `second‐sphere ligands' connecting the cations by means of relatively strong O—H...N hydrogen bonding with generation of doubly interpenetrated pcu (α‐Po) frameworks. Noncoordinated chloride anions and solvent water molecules afford hydrogen‐bonded [(Cl⁻)₂(H₂O)₂] rhombs, which establish topological links between the above frameworks, producing a rare eight‐coordinated uninodal net of {4²⁴.5.6³} ( ilc ) topology.     

Syntheses,Crystal Structures,and Fluorescence Properties of Two Transition Metal‐Organic Coordination Polymers Based on 4,4′‐Dimethyl‐2,2′‐bipyridine

Two transition metal‐organic coordination polymers, [Mn₂(1,3‐bdc)₂(Me₂bpy)₂] · Me₂bpy ( 1 ) and [Co(4,4′‐oba)(Me₂bpy)] ( 2 ) were hydrothermally synthesized and structurally characterized by elemental analysis, IR spectroscopy, TG, and single‐crystal X‐ray diffraction [1,3‐H₂bdc = benzene‐1,3‐dicarboxylic acid, H₂oba = 4,4′‐oxybis(benzoic acid) Me₂bpy = 4,4′‐dimethyl‐2,2′‐bipyridine]. Compound 1 crystallizes in the orthorhombic system, space group P2₁2₁2₁, with a = 23.371(5), b = 14.419(3), and c = 14.251(3) Å. Compound 2 crystallizes in the monoclinic system, space group P2₁/c, with a = 7.4863(15), b = 18.272(4), c = 16.953(5) Å, and β = 107.44(3)°. The crystal structure of complex 1 is a wave‐like layer with central Mn²⁺ atoms bridged by 1,3‐bdc ligands, whereas the structure of compound 2 presents a ladder chain of hexacoordinate Co²⁺ atoms, in which the metal atoms are bridged by 4,4′‐oba ligands and decorated by Me₂bpy ligands. The two compounds are further extended into 3D supramolecular structures through π–π stacking interactions. Additionally, the compounds show intense fluorescence in solid state at room temperature.     

Axially Dissymmetric Chiral (R)‐N,W‐Bis(2‐hydroxy‐3,5‐ditert‐butyl‐arylmethyl)‐1, 1′‐binaphthalene‐2,2′‐diamine as Chiral Ligands in the Reaction of Diethylzinc to Aldehydes†

Chiral ligand (A)‐N,N′‐Bis(2‐hydroxy‐3,5‐di‐tert‐butyl‐arylmethyl)‐1,1′‐binaphthalene‐2,2′‐diamine derived from the reduction of Schiff base (R)‐2,2′‐bis (3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)‐1, 1′‐binaphthyl with LiAlH₄, is fairly effective in the asymmetric addition reaction of diethylzinc to aldehydes by which good yields (46%‐94%) of the corresponding sec‐alcohols can be obtained in moderate ee (51%‐79%) with R configuration for a variety of aldehydes.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Multivariate approach for the enantioselective analysis in MEKC‐MS: II. Optimization of 1,1′‐binaphthyl‐2,2′‐diamine in positive ion mode

Enantiomeric separation and detection of 1,1′‐binaphthyl‐2,2′‐diamine (BNA) has been successfully optimized by MEKC‐ESI‐MS using a polymeric surfactant polysodium N‐undecenoxycarbonyl‐L‐leucinate (poly‐L‐SUCL) as a pseudostationary phase. In the first step, MEKC conditions were optimized by a five‐factor three‐level central composite design (CCD) of experiment. All five MEKC factors (buffer pH, percentage of ACN in the running buffer, concentration of surfactant, concentration of ammonium acetate (NH₄OAc), and voltage) were found significant to the responses (measured as the chiral resolution and analysis time). The interactions between MEKC factors were further evaluated using a quadratic model equation which allowed the generation of 3‐D response surface image to reach the optimum conditions. To obtain the best S/N, sheath liquid composition and spray chamber parameters were successfully optimized using the same strategy. Baseline enantiomeric resolution in less than 20 min and optimum MS signal of BNA enantiomers (S/N = 45 at 0.4 mg/mL) were ultimately achieved at the optimized conditions. The adequacy of the model was validated by experimental runs at the optimal predicted conditions. The predicted results were found to be in good agreement with the experimental data.     

Synthesis of Some Novel Amino Phenols with Octahydro‐1,1′‐binaphthyl Backbone

A series of new octahydro‐1,1′‐binaphthyl derivatives, namely (R)‐(+)‐2‐(N, N‐dialkylamino)‐2′‐hydroxy‐5,5′,6,6′,7, 7′,8,8′‐octahydro‐1,1′‐binaphthyls (7,9), have been synthesized. Their asymmetric induction for enantioselective addition of Et₂Zn to benzaldehyde was examined and it was found that (R)‐(+)‐2‐(N‐cyclohexyl‐N‐methylamino)‐2′‐hydroxy‐5, 5′,6,6′,7,7′,8,8′‐octahydro‐1,1′‐binaphthyl (9c) exhibited the best asymmetric induction among the ligands prepared, up to 55% ee of 1‐phenylpropanol being obtained.     

Improved conditions for fluorescent staining of proteins with 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid in SDS‐PAGE

A simple and sensitive fluorescent staining method for the detection of proteins in SDS‐PAGE, namely IB (improved 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid) stain, is described. Non‐covalent hydrophobic probe 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid was applied as a fluorescent dye, which can bind to hydrophobic sites in proteins non‐specifically. As low as 1 ng of protein band can be detected briefly by 30 min washing followed by 15 min staining without the aiding of stop or destaining step. The sensitivity of the new presented protocol is similar to that of SYPRO Ruby, which has been widely accepted in proteomic research. Comparative analysis of the MS compatibility of IB stain and SYPRO Ruby stain allowed us to address that IB stain is compatible with the downstream of protein identification by PMF.     

Optically Active Helical Poly[(S)‐3‐vinyl‐2,2′‐dihydroxy‐1,1′‐binaphthyl]: New Ligand for Asymmetric Addition of Diethylzinc to Aryl Aldehyde

Poly[(S)‐3‐vinyl‐2,2′‐dihydroxy‐1,1′‐binaphthyl] (L*) was obtained by taking off the protecting groups of poly[(S)‐3‐vinyl‐2,2′‐bis(methoxymethoxy)‐1,1′‐binaphthyl] (poly‐ 1 ). L* was proved to keep a stable helical conformation in solution. The application of helical L* in the asymmetric addition of diethylzinc to aldehydes has been studied. The catalytic system employing 10 mol% of L* and 150 mol% of Ti(OⁱPr)₄ was found to promote the addition of diethylzinc to a wide range of aromatic aldehydes, giving up to 99% enantiomeric excess (ee) and up to 93% yield of the corresponding secondary alcohol at 0°C. The chiral polymer can be easily recovered and reused without loss of catalytic activity as well as enantioselectivity.     

Helical Poly(α,β‐unsaturated ketone) with Bulky Pendant of Binaphthyl from Anionic Polymerization of ((−)‐Menthyl (S)‐6′‐Acrylyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate

((?)‐Menthyl (S)‐6′‐acrylyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate ( 3 ) was synthesized and anionically polymerized using n‐BuLi as an initiator in toluene. The monomer 3 was levorotatory and had an [α]_D²⁵ value of ?72.4, but its corresponding polymer poly‐ 3 was dextrorotatory and showed an [α]_D²⁵ value of +162.0. Poly‐ 3 was confirmed to exist in the form of one‐handed helical structure in solution by means of comparing the specific optical rotation and the CD spectra with that of 3 and the model compounds such as (?)‐menthyl (S)‐6′‐propionyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate 2b and (?)‐menthyl (S)‐6′‐heptanoyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate 2c . This conclusion was also confirmed by the fact that the g‐value of poly‐ 3 is about 11 times of that of monomer 3 .     

N,N′‐Bis(2‐pyridylmeth­yl)ferrocene‐1,1′‐diyldicarboxamide and N,N′‐bis­(3‐pyridylmeth­yl)ferrocene‐1,1′‐diyldicarboxamide

The mol­ecules of N,N′‐bis­(2‐pyridylmeth­yl)ferrocene‐1,1′‐diyl­dicarboxamide, [Fe(C₁₂H₁₁N₂O)₂], contain intra­molecular N—H⋯N hydrogen bonds and are linked into sheets by three independent C—H⋯O hydrogen bonds. The mol­ecules of the isomeric compound N,N′‐bis­(3‐pyridylmeth­yl)ferrocene‐1,1′‐diyldicarboxamide lie across inversion centres, and the mol­ecules are linked into sheets by a combination of N—H⋯N hydrogen bonds and π–π stacking inter­actions between pyridyl groups.     

Synthesis and chiroptical properties of chiral binaphthyl‐containing polyfluorene derivatives

New chiral binaphthyl‐containing polyfluorene (PF) derivatives, PFOH , PFMOM , and PFP , bearing different binaphthyl units ((S)‐2,2′‐bis(methoxymethoxy)‐1,1′‐binaphthyl for PFMOM , (S)‐1,1′‐binaphthyl‐2,2′‐diol for PFOH , and (S)‐2,2′‐bis(diphenylphosphinyl)‐1,1′‐binaphthyl for PFP ) in the backbone have been designed and synthesized through Pd‐catalyzed Suzuki polycondensation. Their properties have been investigated in detail by ¹H NMR, ¹³C NMR, TGA, DSC, UV–vis, photoluminescence (in solutions, in thin films before and after annealing), and circular dichroism (CD) spectroscopic methods compared with poly(9,9‐dihexylfluorene‐2,7‐diyl) ( PF ). The resulting copolymers possessed excellent solubility in organic solvents and emitted strong blue light. The phosphine oxide‐containing copolymers PFP and PFMOM exhibited higher quantum yields and better thermal spectral stability in comparison with PF . All the copolymers exhibited obviously the linearly polarized photoluminescent properties both in solutions and in solid states. High emission polarization ratios (R_PL) of PFP were observed with no obvious decrease upon thermal annealing. In addition, investigation of the CD spectroscopic properties of these copolymers in THF solutions indicated that the chirality of the binaphthyls could be transferred to the whole PF backbone. All these results demonstrated that introduction of the chiral binaphthyls, particularly BINAPO, into the backbone could effectively improve the performances of the copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The Knoevenagel product of indolin‐2‐one and ferrocene‐1,1′‐dicarbaldehyde

Indolin‐2‐one (oxindole), (I), undergoes a Knoevenagel condensation with ferrocene‐1,1′‐dicarbaldehyde, (II), to afford the title complex 3,3′‐[(E,E)‐ferrocene‐1,1′‐diyldimethylidyne]diindolin‐2‐one dichloromethane disolvate, [Fe(C₂₈H₂₀N₂O₂)]·2CH₂Cl₂, (IV). The structure of (IV) contains two ferrocene complex molecules in the asymmetric unit and displays, as expected, intermolecular hydrogen bonding (N—H...O=C) between the indolin‐2‐one units. Intermolecular π–π stacking interactions are also observed.     

Synthesis and chirooptical properties of optically active poly(ester imide)s based on axially asymmetric 1,1′‐binaphthyls

A series of optically active poly(ester imide)s (PEsI's) has been synthesized by the polycondensation reactions of new axially asymmetric dianhydrides, that is, (R)‐2,2′‐bis(3,4‐dicarboxybenzoyloxy)‐1,1′‐binaphthyl dianhydride and (S)‐2,2′‐bis(3,4‐dicarboxybenzoyloxy)‐1,1′‐binaphthyl dianhydride, and various diamines with aromatic, semiaromatic, and aliphatic structures. The polymers have inherent viscosities of 0.45–0.70 dL/g, very good solubility in common organic solvents, glass‐transition temperatures of 124–290 °C, and good thermal stability. Wide‐angle X‐ray crystallography of these polymers shows no crystal diffraction. In comparison with model compounds, an enhanced optical rotatory power has been observed for the repeat unit of optically active PEsI's based on aromatic diamines, and it has been attributed to a collaborative asymmetric perturbation of chiral 1,1′‐binaphthyls along the rigid backbones. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4318–4326, 2004     

Synthesis,crystal structure and magnetic properties of (acetato‐κ2O,O′)bis(5,5′‐dimethyl‐2,2′‐bipyridine‐κ2N,N′)nickel(II) perchlorate monohydrate

The title hydrated ionic complex, [Ni(CH₃COO)(C₁₂H₁₂N₂)₂]ClO₄·H₂O or [Ni(ac)(5,5′‐dmbpy)₂]ClO₄·H₂O (where 5,5′‐dmbpy is 5,5′‐dimethyl‐2,2′‐bipyridine and ac is acetate), (1), was isolated as violet crystals from the aqueous ethanolic nickel acetate–5,5′‐dmbpy–KClO₄ system. Within the complex cation, the Ni^II atom is hexacoordinated by two chelating 5,5′‐dmbpy ligands and one chelating ac ligand. The mean Ni—N and Ni—O bond lengths are 2.0628 (17) and 2.1341 (15) Å, respectively. The water solvent molecule is disordered over two partially occupied positions and links two complex cations and two perchlorate anions into hydrogen‐bonded centrosymmetric dimers, which are further connected by π–π interactions. The magnetic properties of (1) at low temperatures are governed by the action of single‐ion anisotropy, D, which arises from the reduced local symmetry of the cis‐NiO₂N₄ chromophore. The fitting of the variable‐temperature magnetic data (2–300 K) gives g_iso = 2.134 and D/hc = 3.13 cm⁻¹.     

Structural and theoretical characterization of a new twisted 4′‐substituted terpyridine compound: 4′‐(isoquinolin‐4‐yl)‐2,2′:6′,2′′‐terpyridine

4′‐Substituted derivatives of 2,2′:6′,2′′‐terpyridine with N‐containing heteroaromatic substituents, such as pyridyl groups, might be able to coordinate metal centres through the extra N‐donor atom, in addition to the chelating terpyridine N atoms. The incorporation of these peripheral N‐donor sites would also allow for the diversification of the types of noncovalent interactions present, such as hydrogen bonding and π–π stacking. The title compound, C₂₄H₁₆N₄, consists of a 2,2′:6′,2′′‐terpyridine nucleus (tpy), with a pendant isoquinoline group (isq) bound at the central pyridine (py) ring. The tpy nucleus deviates slightly from planarity, with interplanar angles between the lateral and central py rings in the range 2.24 (7)–7.90 (7)°, while the isq group is rotated significantly [by 46.57 (6)°] out of this planar scheme, associated with a short H_tpy…H_isq contact of 2.32 Å. There are no strong noncovalent interactions in the structure, the main ones being of the π–π and C—H…π types, giving rise to columnar arrays along [001], further linked by C—H…N hydrogen bonds into a three‐dimensional supramolecular structure. An Atoms In Molecules (AIM) analysis of the noncovalent interactions provided illuminating results, and while confirming the bonding character for all those interactions unquestionable from a geometrical point of view, it also provided answers for some cases where geometric parameters are not informative, in particular, the short H_tpy…H_isq contact of 2.32 Å to which AIM ascribed an attractive character.     

A Facile Synthesis of Enantiomerically Pure (R)‐6‐Arylbinols

This work reported a convenient method for the preparation of enantiomerically pure 6‐aryl‐2,2′‐dihydroxy‐1,1′‐binaphthyl derivatives starting from the commercially available (R)‐2,2′‐hydroxy‐1,1′‐binaphthyl [(R)‐ 1 ] via bromination, hydrolysis and Suzuki cross coupling reaction. This novel synthetic method was characterized with high regioselectivity, simple operation, mild reaction conditions, and excellent yield (up to 73%). On the other hand, we synthesized the target unknown compounds, which were confirmed by IR, ¹H NMR, ¹³C NMR, MS and elementary analysis.     

1,1′‐Diethyl‐4,4′‐bipyridine‐1,1′‐diium bis(1,1,3,3‐tetracyano‐2‐ethoxypropenide): multiple C—H...N hydrogen bonds form a complex sheet structure

In the title salt, C₁₄H₁₈N₂²⁺·2C₉H₅N₄O⁻, the 1,1′‐diethyl‐4,4′‐bipyridine‐1,1′‐diium dication lies across a centre of inversion in the space group P2₁/c. In the 1,1,3,3‐tetracyano‐2‐ethoxypropenide anion, the two independent –C(CN)₂ units are rotated, in conrotatory fashion, out of the plane of the central propenide unit, making dihedral angles with the central unit of 16.0 (2) and 23.0 (2)°. The ionic components are linked by C—H...N hydrogen bonds to form a complex sheet structure, within which each cation acts as a sixfold donor of hydrogen bonds and each anion acts as a threefold acceptor of hydrogen bonds.