The Influence of Dimensional Effects on the Composition and Properties of Polydicarbonfluoride

The influence of dimensional effects on the compositions and properties of polydicarbonfluoride (C₂F)_n prepared from multilayered graphenes was investigated. Multilayered graphenes were produced by destructive thermal decomposition of intercalation compounds of “idealized” (C₂F)_n that were obtained by reaction of gaseous ClF₃ with natural graphite at a room temperature. The precursors of multilayered graphenes have a common formula (C₂F?xR)_n where R is an organic or inorganic component. It was shown that polydicarbonfluoride prepared from multilayered graphene does not form stable intercalation compound with ClF₃, in contrast to polydicarbonfluoride prepared from graphite, that forms its intercalation compound with ClF₃ during fluorination of initial graphite in the ClF₃ excess. Investigations of polydicarbonfluoride prepared from multilayered graphene showed that it cannot form intercalation compounds with different classes of organic and inorganic compounds as polydicarbonfluoride prepared from graphite can do. The absence of such intercalation activity for polydicarbonfluoride prepared from multilayered graphene can be explained by high exfoliation degree of multilayered graphene (3–4 nm) along the c‐axis that results in the presence of two‐dimensional (2D) structure properties in multilayered graphene. Dimensional effects transformed the chemical properties of polydicarbonfluoride prepared from multilayered graphene and lowered its decomposition temperature by 150 K in comparison with polydicarbonfluoride prepared from graphite.     

Sulfonyl Fluoride‐Based Prosthetic Compounds as Potential 18F Labelling Agents

Nucleophilic incorporation of [¹⁸F]F^? under aqueous conditions holds several advantages in radiopharmaceutical development, especially with the advent of complex biological pharmacophores. Sulfonyl fluorides can be prepared in water at room temperature, yet they have not been assayed as a potential means to ¹⁸F‐labelled biomarkers for PET chemistry. We developed a general route to prepare bifunctional 4‐formyl‐, 3‐formyl‐, 4‐maleimido‐ and 4‐oxylalkynl‐arylsulfonyl [¹⁸F]fluorides from their sulfonyl chloride analogues in 1:1 mixtures of acetonitrile, THF, or tBuOH and Cs[¹⁸F]F/Cs₂CO_3(aq.) in a reaction time of 15 min at room temperature. With the exception of 4‐N‐maleimide‐benzenesulfonyl fluoride ( 3 ), pyridine could be used to simplify radiotracer purification by selectively degrading the precursor without significantly affecting observed yields. The addition of pyridine at the start of [¹⁸F]fluorination (1:1:0.8 tBuOH/Cs₂CO_3(aq.)/pyridine) did not negatively affect yields of 3‐formyl‐2,4,6‐trimethylbenzenesulfonyl [¹⁸F]fluoride ( 2 ) and dramatically improved the yields of 4‐(prop‐2‐ynyloxy)benzenesulfonyl [¹⁸F]fluoride ( 4 ). The N‐arylsulfonyl‐4‐dimethylaminopyridinium derivative of 4 ( 14 ) can be prepared and incorporates ¹⁸F efficiently in solutions of 100 % aqueous Cs₂CO₃ (10 mg mL^?1). As proof‐of‐principle, [¹⁸F] 2 was synthesised in a preparative fashion [88(±8) % decay corrected (n=6) from start‐of‐synthesis] and used to radioactively label an oxyamino‐modified bombesin(6–14) analogue [35(±6) % decay corrected (n=4) from start‐of‐synthesis]. Total preparation time was 105–109 min from start‐of‐synthesis. Although the ¹⁸F‐peptide exhibited evidence of proteolytic defluorination and modification, our study is the first step in developing an aqueous, room temperature ¹⁸F labelling strategy.     

Temperature response of aqueous solutions of pyrene end‐labeled poly(N‐isopropylacrylamide)s probed by steady‐state and time‐resolved fluorescence

Aqueous solutions of a series of monodisperse poly(N‐isopropylacrylamide)s end‐labeled with n‐butyl‐1‐pyrene at one or both chain ends (Py_n‐PNIPAMs with n = 1 or 2) were studied by turbidimetry, light scattering, and fluorescence. For a given polymer concentration and heating rate, the cloud point (T_c) of an aqueous Py_n‐PNIPAM solution, determined by turbidimetry, was found to increase with the number‐average molecular weight (M_n) of the polymer. The steady‐state fluorescence spectra and time‐resolved fluorescence decays of Py_n‐PNIPAM aqueous solutions were analyzed and all parameters retrieved from these analyses were found to be affected as the solution temperature passed through T_c, the solution cloud point, and T_m, the temperature where dehydration of PNIPAM occurred. The trends obtained by fluorescence to characterize the aqueous Py_n‐PNIPAM solutions as a function of temperature were found to be consistent with the model proposed for telechelic PNIPAM by Koga et al. in 2006. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 308–318     

YIHn: A New Family of Metal‐rich Hydride Halides

The graphite‐like yttrium hydride halides, YIH_n (0.8 ? n ? 1.0), have been prepared in quantitative yields by heating either YI₃, YH₂ (1:2) or stoichiometric YI₃, YH₂, Y mixtures in sealed Ta ampoules at 900°C. A lower limit of the homogeneity range, n ≈ 2/3, has been determined from dehydrogenation experiments. All YIH_n phases adopt the ZrBr‐type heavy‐atom structure. The hydrogen variation is accompanied by a change in the c lattice constant from 31.162(3) to 31.033(1) Å for n = 0.61(3) to 1.02(3). The YIH_n phases reversibly react with hydrogen at 400‐600°C to form the light green transparent compound YIH₂. However, increasing the reaction temperature above 700°C causes decomposition to an unidentified phase being in equilibrium with YH₂ and YI₃. The arrangement of the heavy atoms in YIH₂ (P m1; a = 3.8579(3) Å, c = 10.997(1) Å) corresponds to a four‐layer I‐Y‐Y‐I slab with the stacking sequence (AbaB) as was found by x‐ray powder diffraction data refinement with the Rietveld method. A miscibility gap exists between YIH and YIH₂. Samples YIH_n (n ? 1.0) show metallic conductivity at room temperature, which changes into semiconducting behavior with decreasing temperature as n approaches its lower value ≈ 2/3.     

Facile Chemoselective synthesis of 2‐(2‐(Methoxycarbonyl)‐3‐oxo‐2,3‐dihydrobenzofuran‐2‐yl)benzoic acids and 3H,3’H‐Spiro[benzofuran‐2,1′‐isobenzofuran]‐3,3′‐dione derivatives

Oxidation of some derivatives of 4b,9b–dihydroxyindeno[1,2‐b]benzofuran‐10‐one have been investigated in detail using lead(IV) acetate in acetic acid under reflux conditions and periodic acid in aqueous ethanol at room temperature. We realized that during the first 5–15 minutes of the oxidation reactions in lead(IV) acetate/acetic acid system, 3H,3’H‐spiro[benzofuran‐2,1′‐isobenzofuran]‐3,3′‐dione derivatives have been synthesized chemo selectively, while, if the reaction mixtures stirred for additional 3 hours, the main products would be 2‐(2‐(Methoxycarbonyl)‐3‐oxo‐2,3‐dihydrobenzofuran‐2‐yl)benzoic acids. Moreover, room temperature oxidation of 4b,9b–dihydroxyindeno[1,2‐b]benzofuran‐10‐ones by periodic acid (H₅IO₆), leads to the formation of 3H,3’H‐spiro[benzofuran‐2,1′‐isobenzofuran]‐3,3′‐dione derivatives in good to excellent yields.     

A new chromate of tetravalent cerium: Ce2(CrO4)4·2H2O

Dicerium(IV) tetrachromate(VI) dihydrate, Ce(CrO₄)₄·2H₂O, has been prepared from an acidic aqueous solution at room temperature. Its novel crystal structure, which was solved from single‐crystal X‐ray diffraction data, is built from isolated CrO₄ tetrahedra and isolated Ce(O,H₂O)_n (n = 8 and 9) polyhedra. All atoms are in general positions. The mean Ce—O and Cr—O bond lengths are 2.358 and 1.651 Å, respectively. Comparisons are drawn with the structure of Ce^IV(CrO₄)₂·2H₂O.     

An environmentally benign room temperature aqueous homo‐ and copolymerization of styrene and methylmethacrylate catalyzed by [Cp2TiCl2]/NaBPh4

[Cp₂TiCl₂] has been found to be an effective precatalyst for room temperature aqueous homo‐ and copolymerization of methyl methacrylate and styrene in the presence of a cocatalyst, NaBPh₄ and an emulsifier, sodium n‐dodecyl sulfate. The polymers obtained are of high molecular weight with low molecular weight distribution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6496–6503, 2009     

2‐Methyl‐1,3‐disulfoimidazolium polyoxometalate hybrid catalytic systems as equivalent safer alternatives to concentrated sulfuric acid in nitration of aromatic compounds

Ionic liquid‐derived polyoxometalate salts [mdsim]₃[PM₁₂O₄₀] (where M = W and Mo) of two heteropolyacids H₃PW₁₂O₄₀.nH₂O and H₃PMo₁₂O₄₀.nH₂O were synthesized using 2‐methyl‐1,3‐disulfoimidazolium chloride ([mdsim][Cl]) ionic liquid and the corresponding heteropolyacids. Three equivalents of [mdsim][Cl] were treated with the respective Keggin‐structured heteropolyacids (one equivalent) in aqueous medium at room temperature to afford the water‐stable ionic polyoxometalates as acidic solids. They were completely characterized using spectroscopic and other analytical techniques including thermal analysis and Hammett acidity studies. The inherent Brønsted acidic properties of ─SO₃H group of these polyoxometalate salts were studied for the nitration of aromatic compounds with 69% HNO₃ at normal temperature and 80°C without use of any external concentrated sulfuric acid. These strongly acidic polyoxometalates display good recyclability and efficient reusability.     

A Si Photocathode Protected and Activated with a Ti and Ni Composite Film for Solar Hydrogen Production

An efficient, stable and scalable hybrid photoelectrode for visible‐light‐driven H₂ generation in an aqueous pH 9.2 electrolyte solution is reported. The photocathode consists of a p‐type Si substrate layered with a Ti and Ni‐containing composite film, which acts as both a protection and electrocatalyst layer on the Si substrate. The film is prepared by the simple drop casting of the molecular single‐source precursor, [{Ti₂(OEt)₉(NiCl)}₂] (TiNi_pre), onto the p‐Si surface at room temperature, followed by cathodic in situ activation to form the catalytically active TiNi film (TiNi_cat). The p‐Si|TiNi_cat photocathode exhibits prolonged hydrogen generation with a stable photocurrent of approximately ?5 mA cm^?2 at 0 V vs. RHE in an aqueous pH 9.2 borate solution for several hours, and serves as a benchmark non‐noble photocathode for solar H₂ evolution that operates efficiently under neutral–alkaline conditions.     

Vinylboronic Acids as Fast Reacting,Synthetically Accessible,and Stable Bioorthogonal Reactants in the Carboni–Lindsey Reaction

Bioorthogonal reactions are widely used for the chemical modification of biomolecules. The application of vinylboronic acids (VBAs) as non‐strained, synthetically accessible and water‐soluble reaction partners in a bioorthogonal inverse electron‐demand Diels–Alder (iEDDA) reaction with 3,6‐dipyridyl‐s‐tetrazines is described. Depending on the substituents, VBA derivatives give second‐order rate constants up to 27 m ⁻¹ s⁻¹ in aqueous environments at room temperature, which is suitable for biological labeling applications. The VBAs are shown to be biocompatible, non‐toxic, and highly stable in aqueous media and cell lysate. Furthermore, VBAs can be used orthogonally to the strain‐promoted alkyne–azide cycloaddition for protein modification, making them attractive complements to the bioorthogonal molecular toolbox.     

Synthesis of polyacetals with various main‐chain structures by the self‐polyaddition of vinyl ethers with a hydroxyl function

To establish the optimum conditions for obtaining high molecular weight polyacetals by the self‐polyaddition of vinyl ethers with a hydroxyl group, we performed the polymerization of 4‐hydroxybutyl vinyl ether (CH₂?CH? O? CH₂CH₂CH₂CH₂? OH) with various acidic catalysts [p‐toluene sulfonic acid monohydrate, p‐toluene sulfonic anhydride (TSAA), pyridinium p‐toluene sulfonate, HCl, and BF₃OEt₂] in different solvents (tetrahydrofuran and toluene) at 0 °C. All the polymerizations proceeded exclusively via the polyaddition mechanism to give polyacetals of the structure [? CH(CH₃)? O? CH₂CH₂CH₂CH₂? O? ]_n quantitatively. The reaction with TSAA in tetrahydrofuran led to the highest molecular weight polymers (number‐average molecular weight = 110,000, weight‐average molecular weight/number‐average molecular weight = 1.59). 2‐Hydroxyethyl vinyl ether, diethylene glycol monovinyl ether, cyclohexane dimethanol monovinyl ether, and tricyclodecane dimethanol monovinyl ether were also employed as monomers, and polyacetals with various main‐chain structures were obtained. This structural variety of the main chain changed the glass‐transition temperature of the polyacetals from approximately ?70 °C to room temperature. These polyacetals were thermally stable but exhibited smooth degradation with a treatment of aqueous acid to give the corresponding diol compounds in quantitative yields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4053–4064, 2002     

Dendritic Ionic Liquids Based on Imidazolium‐Modified Poly(aryl ether) Dendrimers

A series of dendritic ionic liquids (DILs) based on imidazolium‐modified poly(aryl ether) dendrimers IL‐Br‐Gn (n=0–3) were synthesized by a modified convergent approach and “click” chemistry. The resulting DILs exhibited high thermal resistance with decomposition temperatures up to 270 °C and low glass transition temperatures in the range of approximately ?5–0 °C. All IL‐Br‐Gn were found to be miscible with water at any ratio and could encapsulate hydrophobic molecules. The reversible phase transfer of the DILs between the aqueous and organic phases was accomplished by simple anion exchange between the hydrophilic Br^? anion and the hydrophobic bis(trifluoromethylsulfonyl)amide anion (NTf₂^?). IL‐Br‐Gn could be used as transporters to shuttle hydrophobic molecules between the organic and aqueous phases efficiently. The present work provides a new kind of transporting materials with potential applications in substance separation, drug delivery, and biomolecule transport.     

Electrocarboxylation of Carbon Dioxide with Polycyclic Aromatic Hydrocarbons Using Ni as the Cathode

Using Ni cathode and Al sacrificial anode, the electrocarboxylation of polycyclic aromatic hydrocarbons (naphthalene, 5‐methylnaphthalene, anthracene, phenanthrene and 1H‐indene) with carbon dioxide (4 MPa) could be successfully performed in an undivided cell containing n‐Bu₄NBr‐DMF supporting electrolyte with a constant current at room temperature, affording the corresponding trans‐dicarboxylic acids in good to excellent yields (62% –90%). Among the examined cathode materials (Ni, Pt, Ag, Cu and Zn), Ni and Pt cathodes exhibited a good catalytic activity for the electrocarboxylations. In addition, the experimental results indicated that electrolytic conditions (conducting salts, electricity, CO₂ pressure and temperature) could also affect the result of the electrocarboxylation. According to the results of the electrocarboxylations and CV (cyclic voltammetry), a possible electrochemical reaction mechanism was also proposed.     

Vinylboronic Acids as Fast Reacting,Synthetically Accessible,and Stable Bioorthogonal Reactants in the Carboni–Lindsey Reaction

Bioorthogonal reactions are widely used for the chemical modification of biomolecules. The application of vinylboronic acids (VBAs) as non‐strained, synthetically accessible and water‐soluble reaction partners in a bioorthogonal inverse electron‐demand Diels–Alder (iEDDA) reaction with 3,6‐dipyridyl‐s‐tetrazines is described. Depending on the substituents, VBA derivatives give second‐order rate constants up to 27 m ^?1 s^?1 in aqueous environments at room temperature, which is suitable for biological labeling applications. The VBAs are shown to be biocompatible, non‐toxic, and highly stable in aqueous media and cell lysate. Furthermore, VBAs can be used orthogonally to the strain‐promoted alkyne–azide cycloaddition for protein modification, making them attractive complements to the bioorthogonal molecular toolbox.     

A Redox‐Active Bridging Ligand to Promote Spin Delocalization,High‐Spin Complexes,and Magnetic Multi‐Switchability

A dinuclear Co^II complex, [Co₂(tphz)(tpy)₂]ⁿ⁺ (n=4, 3 or 2; tphz: tetrapyridophenazine; tpy: terpyridine), has been assembled using the redox‐active and strongly complexing tphz bridging ligand. The magnetic properties of this complex can be tuned from spin‐crossover with T_1/2≈470 K for the pristine compound (n=4) to single‐molecule magnet with an S_T=5/2 spin ground state when once reduced (n=3) to finally a diamagnetic species when twice reduced (n=2). The two successive and reversible reductions are concomitant with an increase of the spin delocalization within the complex, promoting remarkably large magnetic exchange couplings and high‐spin species even at room temperature.     

Matrix‐assisted laser ablation production of gold cluster ions from Au‐coated photonic crystals

A new strategy was explored to generate pure gold cluster ions, Au_n^+/?, from gold films deposited on solid substrates via a matrix‐assisted laser ablation technique. The gold films deposited on SiO₂‐particle‐assembled photonic crystals were demonstrated to be the most ideal compared with the films deposited on various glass slides. Dropped with a matrix of 2‐(4‐hydroxyphenylazo) benzoic acid and bombarded by nitrogen pulse laser (355 nm), they could release a series of Au_n⁺ with n more than 110 or Au_n^? with n more than 60 according to the data obtained by inline time‐of‐flight mass spectrometry. The gold‐deposited photonic crystal substrates could be stored at room temperature for at least 6 months. The method is hence steady and convenient in use. Copyright © 2012 John Wiley & Sons, Ltd.     

A Redox‐Active Bridging Ligand to Promote Spin Delocalization,High‐Spin Complexes,and Magnetic Multi‐Switchability

A dinuclear Co^II complex, [Co₂(tphz)(tpy)₂]ⁿ⁺ (n=4, 3 or 2; tphz: tetrapyridophenazine; tpy: terpyridine), has been assembled using the redox‐active and strongly complexing tphz bridging ligand. The magnetic properties of this complex can be tuned from spin‐crossover with T_1/2≈470 K for the pristine compound (n=4) to single‐molecule magnet with an S_T=5/2 spin ground state when once reduced (n=3) to finally a diamagnetic species when twice reduced (n=2). The two successive and reversible reductions are concomitant with an increase of the spin delocalization within the complex, promoting remarkably large magnetic exchange couplings and high‐spin species even at room temperature.     

Formation of stable carbenoid α-methoxyorganolithium compounds, 1-alkyl-2-lithiummethoxymethyl-o-carboranes,by metalation of 1-alkyl-2-methoxymethyl-o-carboranes withn-butyllithium

1-Alkyl-2-methoxymethyl-o-carboranes are easily metalated withn-butyllithium in an ether-benzene solution to form carbenoid 1-alkyl-2-lithiummethoxymethyl-o-carboranes, which are stable at room temperature. Under the action of H₂O, CO₂, and PhCHO these lithium carboranes yield the starting compounds, carboxylic acids, and benzyl alcohols, respectively.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 243–245, January, 1996.     

(HBNH)n团簇的结构和稳定性

Structures and thermodynamic properties of the imidoboranes （HBNH）n （n=1-16） have been investigated theoretically at the B3LYP/6-31G^＊ level of theory. Needle-shaped oligomers that violate the isolated square rule were found to be more stable than cage isomers. The needle-shaped oligomer with n=16 was predicted to be exceptionally stable at low temperature, hexamer and octamer clusters dominated the gas phase at higher temperature. The highest oligomerization degree of the spontaneous cluster fomation has been estimated. It was concluded that generation of the gas phase （HBNH）n clusters with oligomerization degree n ≥24 was viable, making these species possible intermediates involved in the gas phase generation of BN nanoparticles.     

以镍为阴极由二氧化碳与芳香酮电合成α-羟基羧酸

室温下,在一室电解池中,以n-Bu4NBr-DMF作电解质、镍为阴极、铝为阳极,恒电流电解二氧化碳与芳香酮（苯乙酮、对二苯甲酮、6-甲氧基-2-萘乙酮、4-甲基苯乙酮和4-甲氧基苯乙酮）,可以得到相应的α-羟基羧酸（产率56%-90%）。实验结果显示,阴极材料、芳香族酮的结构以及电解条件（如电量、底物浓度、导电盐、溶剂和二氧化碳压力等）对目标产物的产率有很大影响;反应系统中质子剂（水）的存在将导致副产物频哪醇的生成。本文还根据循环伏安实验和合成实验结果简要地讨论了反应机理。