Modulated photophysics of 3-pyrazolyl-2-pyrazoline derivative entrapped in micellar assembly

The photophysical behavior of 3-pyrazolyl-2-pyrazoline derivative (PZ), a newly synthesized biologically active compound has been studied in micellar solutions of anionic sodium dodecyl sulfate (SDS), cationic cetyl trimethylammonium bromide (CTAB) and nonionic p- tert-octylphenoxy polyoxyethanol (Triton X-100, TX-100) micelle using steady state and time-resolved fluorescence spectroscopy technique. Influence of the micelles on the photophysics of PZ has also been investigated using different approaches. The location of the fluorophore PZ in the micelle has been identified by cetyl pyridinium chloride (CpCl) induced fluorescence quenching and micropolarity surrounding that fluorophore in micellar solution. The effect of urea on the steady state fluorescence and relaxation dynamics of the micelle bound probe has also been observed. The results have been interpreted in terms of the model that urea displaces water molecules from the micellar interface and the consequent destabilization leads to the expulsion of the probe molecules from the interfacial region. An attempt has been made to determine probe sensing microviscosities for these micellar microenvironments in the light of average reorientation times of the probe PZ.     

Photophysics of a cationic biological photosensitizer in anionic micellar environments: combined effect of polarity and rigidity

A steady-state and time-resolved photophysical study of a cationic phenazinium dye, phenosafranin (PSF), has been investigated in well-characterized biomimetic micellar nanocavities formed by anionic surfactants of varying chain lengths, namely, sodium decyl sulfate (S(10)S), sodium dodecyl sulfate (S(12)S), and sodium tetradecyl sulfate (S(14)S). In all these micellar environments, the charge transfer fluorescence of PSF shows a large hypsochromic shift along with an enhancement in the fluorescence quantum yield as compared to that in aqueous medium. A reduction in the nonradiative deactivation rate within the hydrophobic interior of micelles led to an increase in the fluorescence yield and lifetime. The present work shows the degree of accessibility of the fluorophore toward the ionic quencher in the presence of surfactants of different surfactant chain lengths. The fluorometric and fluorescence quenching studies suggest that the fluorophore resides at the micelle-water interfacial region. The enhancements in the fluorescence anisotropy and rotational relaxation time of the probe in all the micellar environments from the pure aqueous solution suggest that the fluorophore binds in motionally restricted regions introduced by the micelles. Polarity and viscosity of the microenvironments around the probe in the micellar systems have been determined. The work has paid proper attention to the hydrophobic effect of the surfactant chain length on photophysical observations.     

Substituent effect on the emission behavior of thiazolidinedione derivatives in cationic and anionic micellar media

Thiazolidinedione (TZD) derivatives have been found to possess potent immunostimulatory properties as well as antiarthritic, antidiabetic and oncostatic activities. These compounds are free radical scavengers. Photophysical properties of the compounds have been studied in different aqueous micellar environments using steady state and time resolved emission spectroscopy. Appreciable hypsochromic shifts with enhancement in the fluorescence intensities have been observed in the ionic micellar media. The binding constants and energy changes during probe-micelle binding have been evaluated from relevant fluorescence data. Polarity of the microenvironment surrounding the probe molecules has been determined in the micellar systems.     

Photophysical study of 3-acetyl-4-oxo-6,7-dihydro-12H-indolo[2,3-a]quinolizine in biomimetic reverse micellar nanocavities: a spectroscopic approach

Photophysical properties of 3-acetyl-4-oxo-6,7-dihydro-12H-indolo[2,3-a]quinolizine (AODIQ), a bioactive molecule, has been investigated in well-characterized, monodispersed biomimicking nanocavities formed by sodium bis(2-ethylhexyl)sulfosuccinate (AOT) in heptane using steady-state and picosecond time resolved fluorescence and fluorescence anisotropy. The emission behavior of AODIQ is very much dependent upon the water/surfactant mole ratio (W), i.e., on the water pool size of the reverse micellar core. AODIQ exhibits a sharp decrease in fluorescence anisotropy with increasing W, implying that the overall motional restriction experienced by the molecule is decreased with increased hydration. Some of the depth-dependent relevant fluorescence parameters, namely, fluorescence maxima and fluorescence anisotropy (r), have been monitored for exploiting the distribution and microenvironment around the probe in the reverse micelles. Fluorescence spectral position and fluorescence quenching studies suggest that the probe does not penetrate into the reverse micellar core; rather it binds at the interfacial region. Quantitaive estimates of the micropolarity and microviscosity at the binding sites of the probe molecule have been determined as a function of W.     

Effect of surfactant chain length on the binding interaction of a biological photosensitizer with cationic micelles

Steady-state and time-resolved fluorometric techniques have been exploited to study the photophysical and distribution behavior of an efficient cancer cell photosensitizer, norharmane (NHM), in well-characterized, biomimicking nanocavities formed by cationic micelles with varying surfactant chain length. Amphiphiles like dodecyl trimethyl ammonium bromide (DTAB), tetradecyl trimethyl ammonium bromide (TTAB), and cetyl trimethyl ammonium bromide (CTAB) have been used for the purpose. Emission behavior of NHM is very much dependent on the surfactant concentration as well as their hydrophobic chain length. The binding constant (K) and free-energy change (DeltaG) for the interaction of NHM with the cationic micelles have been determined from the fluorescence data. Polarity of the microenvironment around the probe has been determined in the cationic micellar environments from a comparison of the variation of fluorescence properties of the two-prototropic species of the probe in water/dioxane mixture with varying composition. Experimental results demonstrate that the variation in the cationic surfactant chain length plays an important role in promoting a specific prototropic form of the probe molecule. Fluorescence decays are biexponential in all the micelles indicating that the probe molecules are distributed between the two distinct regions of the micelles. The population of the component with a longer lifetime corresponds to the probe in the head group site, while the short-lived component comes from the probe bound to the core region of the micelles. On the basis of the lifetime measurements, the partitioning behavior of the chromophore in the head group and in the core regions in the micelles has been determined.     

Fluorescence probing of interior, interfacial, and exterior regions in solution aggregates of poly(ethylene oxide)- poly(propylene oxide)-poly(ethylene oxide) triblock copolymers

Fluorescence spectroscopy is used to probe local environments within regions of different polarity and hydrophobicity in aqueous aggregates of PEO(109)-PPO(41)-PEO(109) triblock copolymers. These copolymer aggregates have well characterized microphases in aqueous solution. Concentrations and temperatures for our studies are chosen such that the copolymers are in unimer, micellar, or micellar hydrogel forms. The observed fluorescence spectra and lifetimes from solutions individually labeled with each of the three coumarin probes report on the changes in the local polarity of the core, exterior, interfacial, and corona regions of these copolymer aggregates. This multiple fluorescence probe methodology will be straightforward to apply in general to problems in polymer and biopolymer aggregates, especially those that display strong hydrophobic effects.     

疏水化聚N-异丙基丙烯酰胺胶束的极性

利用Kamlet-Taft溶致变色比较法,在确定了二种探针化合物的峰值波数与溶剂的溶致变色参数表达式的基础上,研究了一系列不同疏水化修饰的聚N-异丙基丙烯酰胶类共聚物水溶液胶束的极性肝（π）和氢键供体能力（α）．结果发现,在摩尔投料比相同时,随着共聚物中丙烯酸酯烷基链的增长,共聚物水溶液胶束的π越来越小,α越来越大;在共聚物组成相同时,随着丙烯酸酯投料比的增大,共聚物水溶液波束的π也呈现相同的情况,而α则无明显的规律．对此现象作了讨论．     

Rotational diffusion of an ionic solute in polymorphic environments of a block copolymer: influence of interfacial friction on solute rotation

In an attempt to understand the role of interfacial friction on solute rotation, fluorescence anisotropy decays of a cationic solute, rhodamine 110, have been measured in polymorphic environments of a triblock copolymer, (PEO)20-(PPO)70-(PEO)20 (P123) (PEO = poly(ethylene oxide), PPO = poly(propylene oxide)). It has been noticed that even though rhodamine 110 is located in the interfacial region of the micelles, sol-gel transition does not significantly influence its rotation. Micelle-micelle entanglement, which is responsible for gelation, persists even in the micellar solution phase, perhaps to a lesser degree, and this entanglement is responsible for the observed behavior. This hypothesis has been substantiated by undertaking concentration-dependent studies in which it is shown that the reorientation time of the solute increases with an increase in the micellar concentration. In the case of reverse micelles, it has been observed that an enhancement in the water content facilitates solute rotation, which has been rationalized on the basis of solute migration from the hydrated poly(ethylene oxide) region to the poly(ethylene oxide)-water interface within the core.     

Effect of electrostatic interaction on the location of molecular probe in polymer-surfactant supramolecular assembly: a solvent relaxation study

Effect of electrostatic interaction on the location of a solubilized molecular probe with ionic character in a supramolecular assembly composed of a triblock copolymer, P123 ((ethylene oxide) 20-(propylene oxide) 70-(ethylene oxide) 20) and a cosurfactant cetyltrimethylammonium chloride (CTAC) in aqueous medium has been studied using steady-state and time-resolved fluorescence measurements. Coumarin-343 dye in its anionic form has been used as the molecular probe. In the absence of the surfactant, CTAC, the probe C343 prefers to reside at the surface region of the P123 micelle, showing a relatively less dynamic Stokes' shift, as a large part of the Stokes' shift is missed in the present measurements due to faster solvent relaxation at micellar surface region. As the concentration of CTAC is increased in the solution, the percentage of the total dynamic Stokes' shift observed from time-resolved measurements gradually increases until it reaches a saturation value. Observed results have been rationalized on the basis of the mixed micellar structure of the supramolecular assembly, where the hydrocarbon chain of the CTAC surfactant dissolves into the nonpolar poly(propylene oxide) (PPO) core of the P123 micelle and the positively charged headgroup of CTAC resides at the interfacial region between the central PPO core and the surrounding hydrated poly(ethylene oxide) (PEO) shell or the corona region. The electrostatic attraction between the anionic probe molecule and the positively charged surface of the PPO core developed by the presence of CTAC results in a gradual shift of the probe in the deeper region of the micellar corona region with an increase in the CTAC concentration, as clearly manifested from the solvation dynamics results.     

Interaction and Stability of Mixed Micelle and Monolayer of Nonionic and Cationic Surfactant Mixtures

Interaction and stability of binary mixtures of cationic surfactants hexadecyltrimethylammonium bromide (HTAB) or hexadecylpyridinium bromide (HPyBr) with nonionic surfactant decanoyl-N-methyl-glucamide (Mega-10) have been studied at different mole fraction of cationic surfactants by using interfacial tension measurements and fluorescence probe techniques. From interfacial tension measurements, the critical micellar concentration and various interfacial thermodynamic parameters have been evaluated. The experimental cmc's were analyzed with the pseudophase separation model, the regular solution theory, and the Maeda's approach. These approaches allowed us to determine the interaction parameter and composition in the mixed state. By using the static quenching method, the mean micellar aggregation numbers of pure and mixed micelles of HTAB + Mega-10 were obtained. It has been observed that the aggregation number of mixed micelles deviates negatively from the ideal behavior. The micropolarity of the micelle was monitored with pyrene fluorescence intensity ratio and found to be increase with the increase of ionic content. The polarization of fluorescence probe Rhodamine B was monitored at different mole fraction of cationic surfactants.     

Spectral properties and inclusion of 3-(4'-dimethylaminophenyl)-1-(2-furanyl)prop-2-en-1-one in organized media of micellar solutions, beta-cyclodextrin and viscous medium

On the line of a previous work on the spectral properties of some of heteroaryl chalcone, the absorption and fluorescence emission spectral properties of 3-(4'-dimethylaminophenyl)-1-(2-furanyl)prop-2-en-1-one (DMAFP), have been investigated in organized media of aqueous micellar and beta-cyclodextrin (beta-CD) solutions. While the absorption spectra are less sensitive to the nature of the added surfactant or beta-CD, the characteristics of the intramolecular charge transfer (ICT) fluorescence are highly sensitive to the properties of the medium. The ICT maximum is strongly blue-shifted with a great enhancement in the fluorescence quantum yield on adding micellar or beta-CD. This indicates the solubilization of DMAFP in the micellar core and formation of an inclusion complex with beta-CD. The critical micelle concentrations (CMC) as well as the polarity of the micellar core of SDS, CTAB and TX-100 have been determined. The CMC values are in good agreement with the reported values while the polarity is lower indicating that DMAFP molecules are incorporated in the micellar core not at the micellar interface. The inclusion constants of binding of DMAFP in micellar or beta-CD have been also determined. The thermodynamic parameters of formation of DMAFP:CD inclusion complex have been calculated from the temperature dependence of the fluorescence spectra of the formed complex. The highly negative value of formation entropy (DeltaS=-98.0Jmol(-1)K(-1)) reflects the high restrictions imposed on the movement of both the host and included guest molecules which is consistent with the increase of the fluorescence yield and blue shift of the fluorescence maximum.     

Influence of the addition of alcohol on the reaction methyl-4-nitrobenzenesulfonate + Br(-) in tetradecyltrimethylammonium bromide aqueous micellar solutions

The reaction methyl-4-nitrobenzenesulfonate + Br(-) was studied in tetradecyltrimethylammonium bromide (TTAB) aqueous micellar solutions in the absence and in the presence of various amounts of n-hexanol, n-pentanol, and n-butanol. Kinetic micellar effects provoked by the addition of the linear alcohols can be rationalized by using simple pseudophase kinetic models. The equilibrium binding constants of the methyl-4-nitrobenzenesulfonate molecules to the cationic micelles decreases when [alcohol] increases. The (k(2)(m)/V(m)) values found are practically the same for the different TTAB-alcohol micellar solutions studied, independent of the nature and concentration of the alcohol present in the reaction medium. This has been explained by considering the balance of two factors operating on reactivity in opposite ways: (1). an increase in the volume of the micellar interfacial region upon increasing alcohol concentration, and (2). a decrease in the polarity of the interfacial region as the amount of alcohol present in the micellar solutions increases.     

A dielectric method to investigate the interfacial composition of micellar aggregates

The aggregation state of micellar solutions is mainly determined by the specific chemical and physical conditions within the interfacial region constituted by the polar head terminations and solvent molecules. In particular the mutual head group interactions and their interactions with solvent and cosolvent molecules strongly affect the overall shape, size and size distribution function of micellar solutions. It then becomes evident how important the determination of the composition and structural arrangement of the interfacial region is. Permittivity measurements of an heterogeneous system allow the evaluation of the permittivity of the suspended particles using one of the available mixture equations. If the suspended particles are constituted by separated regions with different dielectric properties it is possible to iterate the procedure to extract information on each of the regions. In the case of micellar aggregates there is the hydrocarbon core region, equivalent to an oil liquid phase, and an interfacial region, constituted by the polar head group terminations, solvent and cosolvent molecules. By comparing the interfacial permittivity with the permittivity of mixtures composed by the solvent and free head groups, it is possible to evaluate the composition of the micellar interface. We apply this methodology on two different surfactant mixtures: C₁₂E₆ in water and in water–urea (2, 4 and 6 M); octyl-β- -glucopyranoside in water and in water–glyclne (0.3 and 0.6 M). The results obtained concerning the conformation and composition at the interface are consistent with the overall behaviour of the solutions studied by many other different techniques supporting the proposed procedure.     

Fate of excited probes in micellar systems

This article presents studies on the photophysical and photochemical behavior of probes within micellar systems: organized emulsifier/polymer aggregates; the intra- and interpolymer association of amphiphilic polymers; monomer-swollen micelles (microdroplets); and the interfacial layer. Pyrene (Py) as a probe is particularly attractive because of its ability to measure the polarity of its microenvironment. Dipyme yields information on the microviscosity of micellar systems. Probes such as laurdan and prodan can be used to explore the surface characteristics of micelles or microdroplets. The dansyl group has a special photophysical property that gives information about the local polarity and mobility (viscosity) of the microenvironment. The organized association of amphiphilic polymer and emulsifier introduces a heterogeneity in the local concentration of the reactants. This heterogeneity also results from the attractive interaction between hydrophilic monomer and emulsifier in the case when the monomer carries a positive charge and the counterpart a negative one, and vice versa. Some emulsifiers can bind to the amphiphilic copolymers by simple partitioning between the aqueous phase and the polymer--non-cooperative association. The interaction between micelles (microdroplets) and charged polymers leads to the formation of mixed micelles. Binding emulsifiers to these polymers was detected at emulsifier concentrations much below the critical micellar concentration (CMC). Emulsifiers often interact cooperatively with polymers at the critical aggregation concentration (CAC) below the CMC, forming micelle-like aggregates within the polymer. The CAC can be taken as a measure of interaction between the emulsifier and polymer. A decrease in the monomer fluorescence intensity of probe-labeled polymer results from increased excimer formation, or higher aggregates within the unimolecular polymeric micelles. An increase in the monomer fluorescence intensity of probe-labeled polymer within the micellar system can be ascribed to shielding of the probe chromophores by emulsifier micelles. The quenching of probe emission by (un)charged hydrophilic monomer depends on partitioning of the monomer between the aqueous phase and the micelles. Penetration of reactants into the interfacial layer determines the quenching of the hydrophobic probe by hydrophilic quencher, or vice versa. Quenching depends on the thickness, density and charge of the interfacial layer. Compartmentalization prevents the carbonyl compound and unsaturated monomer from coming into sufficiently close contact to allow singlet or triplet-monomer interaction. All negatively charged carbonyl probe molecules are quenched with significantly lower rates than the parent neutral hydrophobic benzophenone molecules, which were located further inside the aggregates. This results from the different conformation and allocation of reactants within the micellar system. In the reverse micelles, quenching depends on the amount of water in the interfacial layer and the total area of the water/oil interface.     

Polyene photoisomerization rates: are they distinct in aqueous block copolymer micellar solutions and gels?

Photoisomerization of 3,3'-diethyloxadicarbocyanine iodide (DODCI) has been investigated in water, 5% and 30% aqueous triblock copolymer, poly(ethylene oxide)20-poly(propylene oxide)70-poly(ethylene oxide)20 (P123) by measuring the fluorescence quantum yields and lifetimes in the temperature range 293-318 K. Reports available in literature indicate that 5% aqueous P123 exists as micellar solution, whereas 30% aqueous P123 forms gel due to micelle-micelle entanglement. This study has been undertaken to find out how the polyene photoisomerization rates are influenced in the sol and gel phases. It has been observed that 60%-70% of DODCI is located in the palisade layer of the micelles in the sol as well as gel phases and the photoisomerization rate of this component is identical in both the phases at a particular temperature. The remainder of the probe is located in the interfacial region and isomerization rates of this fraction are slower by a factor of 1.4-1.1 in the gel phase compared with the micellar solution. The retardation of the isomerization rate in the gel phase has been explained on the basis of enhancement in the friction experienced by the probe due to micelle-micelle entanglement at the interface. Compared to the isomerization rates in water, the rates of photoisomerization of DODCI located in the palisade layer, interfacial region of micellar solution, and interfacial region of the micelles in the gel phase are slower by factors of 3.5, 1.5-1.9, and 2, respectively. The outcome of this study validates the point that in organized media photoisomerization rates are sensitive to the localized friction, which is not uniform unlike in a homogeneous solution.     

FLUORESCENCE PROBE FOR MICROENVIRONMENTS: A NEW PROBE FOR MICELLE SOLVENT PARAMETERS AND PREMICELLAR AGGREGATES

Abstract— A previous study on the electronic spectroscopy of p -N,N-dialkylaminobenzylidenemalononitrile, 1, has been extended to a larger variety of organic solvents and to micelles of ionic and nonionic surfactants. By comparing the fluorescence emission (λ_F and φ_∫) of 1 in micelles and in homogeneous organic solvents, the effective polarity and the microviscosity of the micellar environments of potassium dodecanoate, sodium dodecyl sulfate, cetyltrimethylammonium bromide and Triton X-100 micelles have been determined to be 40, 40, 36 and 28, respectively and 23, 31, 34 and 28 cP, respectively. These results indicate that the fluorescence probe is located in the micelle–water interface of a micelle and this region of a micelle is polar and viscous. 1 has also been studied in different surfactants with varying surfactant concentrations. The φ_∫ of 1, a microviscosity gauge for micellar aggregates, remains unchanged at the critical micelle concentrations of various surfactants, but decreases at much lower surfactant concentrations. This is attributable to the formation of premicellar aggregates of surfactant molecules below their critical micelle concentrations.     

Interfacial and aggregation properties of the binary mixture of decanoyl-N-methyl-glucamide and hexadecyltriphenylphosphonium bromide

The interfacial and aggregation behavior of the nonionic surfactant decanoyl-N-methyl-glucamide (Mega-10) with the cationic surfactant hexadecyltriphenylphosphonium bromide (HTPB) have been studied using interfacial tension measurements and fluorescence techniques. From interfacial tension measurements, the critical micellar concentrations (cmc) and various interfacial thermodynamic parameters have been evaluated. The experimental results were analyzed in the context of the pseudophase separation model, the regular solution theory, and the Maeda’s approach. These approaches allowed us to determine the interaction parameter and composition in the mixed state. By using the static quenching method, the mean micellar aggregation numbers of pure and mixed micelles of HTPB+Mega-10 were obtained. It was found that that the aggregation number decreases with increasing mole fraction of HTPB. This behavior is attributed to the presence of the bulky head group of HTPB, which creates steric head group incompatibility and/or electrostatic repulsion. The micropolarity of the micelle was monitored with pyrene fluorescence intensity ratio. It was observed that the increasing participation of HTPB induces the formation of micelles with a hydrated structure. The polarization of the fluorescent probe Rhodamine B was monitored in micellar medium and found to increase with the increase of ionic content. This behavior suggests the formation of mixed micelles with a more ordered or rigid structure.     

Spectroscopic investigation on the interaction of ICT probe 3-acetyl-4-oxo-6,7-dihydro-12H Indolo-[2,3-a] quinolizine with serum albumins

Interaction of 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine (AODIQ), a biologically active molecule, with model transport proteins, bovine serum albumin (BSA) and human serum albumin (HSA) have been studied using steady state and picosecond time-resolved fluorescence and fluorescence anisotropy. The polarity dependent intramolecular charge transfer (ICT) process is responsible for the remarkable sensitivity of this biological fluorophore to the protein environments. The CT fluorescence exhibits appreciable hypsochromic shift along with an enhancement in the fluorescence yield, fluorescence anisotropy (r) and fluorescence lifetime upon binding with the proteins. The reduction in the rate of ICT within the hydrophobic interior of albumins leads to an increase in the fluorescence yield and lifetime. Marked increase in the fluorescence anisotropy indicates that the probe molecule is located in a motionally constrained environment within the proteins. Micropolarities in the two proteinous environments have been determined following the polarity sensitivity of the CT emission. Addition of urea to the protein-bound systems leads to a reduction in the fluorescence anisotropy indicating the denaturation of the proteins. Polarity measurements and fluorescence resonance energy transfer (FRET) studies throw light in assessing the location of the fluorophore within the two proteinous media.     

Kinetic study in water-ethylene glycol cationic, zwitterionic, nonionic, and anionic micellar solutions

The spontaneous hydrolysis of phenyl chloroformate was studied in water-ethylene glycol, EG, cationic, zwitterionic, nonionic, and anionic micellar solutions, the surfactants being tetradecyltrimethylammonium bromide, tetradecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate, tricosaoxyethylene glycol ether, and sodium dodecyl sulfate. The dependence of the observed rate constant on surfactant concentration as well as on the percentage by weight of EG, varying from 0 to 50 wt %, was investigated. Information about changes in the critical micelle concentrations, in the micellar ionization degrees (for ionic surfactants), in the aggregation numbers, and in the polarity of the interfacial region of the micelles upon changing the weight percent of EG was obtained through conductivity, surface tension, spectroscopic, and fluorescence measurements. A simple pseudophase model was adequate to rationalize the kinetic data. Micellar medium effects were explained by considering charge-charge interactions and polarity, ionic strength, and water content in the micellar interfacial region. The acceleration of the reaction produced by an increase in the amount of EG present in the mixture was explained on the basis of the substantial decrease in the equilibrium binding constant of phenyl chloroformate molecules to the micelles, resulting in the contribution of the reaction taking place in the bulk water-EG phase being more important. The weight percent of EG did not substantially influence the rate constant in the micellar pseudophase.     

Study of proteinous and micellar microenvironment using donor acceptor charge transfer fluorosensor N,N-dimethylaminonaphthyl-(acrylo)-nitrile

Interaction of charge transfer fluorophore N,N-dimethylaminonaphthyl-(acrylo)-nitrile (DMANAN) with globular proteins Human Serum Albumin (HSA) and Bovine Serum Albumin (BSA) brings forth a marked change in the position and intensity of band maxima both in case of absorption and fluorescence spectra. Spectroscopic approach has been elaborately implemented to explore the binding phenomena of the probe with HSA and BSA and it is found that the extent of binding of the probe to both serum albumins is similar in nature. Steady state fluorescence anisotropy values, fluorescence quenching study using acrylamide quencher and Red Edge Excitation Shift (REES) help in drawing reliable conclusions regarding the location of the probe molecule within the hydrophobic cavity of the proteins. An increase in fluorescence lifetime of the probe molecule solubilized in both the proteinous media also indicate that the probe is located at the motionally restricted environment inside the hydrophobic cavity of proteins and hence non-radiative channels are less operative than in the bulk water. Similarly, the variation of position and intensity of the emission maxima of DMANAN solubilized in micellar medium of Sodium Dodecyl Sulphate (SDS) also predicts well the critical micellar concentration (CMC) and polarity of micellar microenvironment.