Cation [M = H+, Li+, Na+, K+, Ca2+, Mg2+, NH4+, and NMe4+] interactions with the aromatic motifs of naturally occurring amino acids: a theoretical study

Ab initio (HF, MP2, and CCSD(T)) and DFT (B3LYP) calculations were done in modeling the cation (H(+), Li(+), Na(+), K(+), Ca(2+), Mg(2+), NH(4)(+), and NMe(4)(+)) interaction with aromatic side chain motifs of four amino acids (viz., phenylalanine, tyrosine, tryptophan and histidine). As the metal ion approaches the pi-framework of the model systems, they form strongly bound cation-pi complexes, where the metal ion is symmetrically disposed with respect to all ring atoms. In contrast, proton prefers to bind covalently to one of the ring carbons. The NH(4)(+) and NMe(4)(+) ions have shown N-H...pi interaction and C-H...pi interaction with the aromatic motifs. The interaction energies of N-H...pi and C-H...pi complexes are higher than hydrogen bonding interactions; thus, the orientation of aromatic side chains in protein is effected in the presence of ammonium ions. However, the regioselectivity of metal ion complexation is controlled by the affinity of the site of attack. In the imidazole unit of histidine the ring nitrogen has much higher metal ion (as well as proton) affinity as compared to the pi-face, facilitating the in-plane complexation of the metal ions. The interaction energies increase in the order of 1-M < 2-M < 3-M < 4-M < 5-M for all the metal ion considered. Similarly, the complexation energies with the model systems decrease in the following order: Mg(2+) > Ca(2+) > Li(+) > Na(+) > K(+) congruent with NH(4)(+) > NMe(4)(+). The variation of the bond lengths and the extent of charge transfer upon complexation correlate well with the computed interaction energies.     

Comprehensive study on the solvation of mono- and divalent metal cations: Li+, Na+, K+, Be2+, Mg2+ and Ca2+

Hydration of mono- and divalent metal ions (Li(+), Na(+), K(+), Be(2+), Mg(2+) and Ca(2+)) has been studied using the DFT (B3LYP), second-order M?ller-Plesset (MP2) and CCSD(T) perturbation theory as well as the G3 quantum chemical methods. Double-zeta and triple-zeta basis sets containing both (multiple) polarization and diffuse functions were applied. Total and sequential binding energies are evaluated for all metal-water clusters containing 1-6 water molecules. Total binding energies predicted at lower levels of theory are compared with those from the high level G3 calculations, whereas the sequential binding energies are compared with available experimental values. An increase in the quality of the basis set from double-zeta to triple-zeta has a significant effect on the sequential binding energies, irrespective of the geometries used. Within the same group (I or II), the sequential binding energy predictions at the MP2 and B3LYP vary appreciably. We noticed that, for each addition of a water molecule, the change of the M-O distance in metal-water clusters is higher at the B3LYP than at the MP2 level. The charge of the metal ion decreases monotonically as the number of water molecules increase in the complex.     

Structure of the oxygen-rich cluster cation Al2O7+ and its reactivity toward methane and water

The oxygen-rich cluster Al(2)O(7)(+) is generated in the gas phase and investigated with respect to both its structure and its reactivity toward small, inert molecules using Fourier-transform ion cyclotron resonance (FT-ICR) mass spectrometry and DFT-based calculations. Al(2)O(7)(+) reacts with CH(4) under ambient conditions via hydrogen atom transfer (HAT), and with H(2)O a ligand exchange occurs which gives rise to the evaporation of two O(2) molecules. The resulting product ion Al(2)O(4)H(2)(+) is also capable of abstracting a hydrogen atom from both H(2)O and CH(4). As indicated in the H(2)O/2O(2) ligand exchange and supported by collision-induced dissociation (CID) experiments, two O(2) units constitute structural elements of Al(2)O(7)(+). Further insight is provided by DFT calculations, performed at the unrestricted B3LYP/TZVP level, and reaction mechanisms are suggested on the basis of both the experimental and theoretical results.     

Hydration energies in the gas phase of select (MX)mM+ ions, where M+ = Na+, K+, Rb+, Cs+, NH4+ and X- = F-, Cl-, Br-, I-, NO2-, NO3-. Observed magic numbers of (MX)mM+ ions and their possible significance

The sequential hydration energies and entropies with up to four water molecules were obtained for MXM(+) = NaFNa(+), NaClNa(+), NaBrNa(+), NaINa(+), NaNO(2)Na(+), NaNO(3)Na(+), KFK(+), KBrK(+), KIK(+), RbIRb(+), CsICs(+), NH(4)BrNH(4)(+), and NH(4)INH(4)(+) from the hydration equilibria in the gas phase with a reaction chamber attached to a mass spectrometer. The MXM(+) ions as well as (MX)(m)M(+) and higher charged ions such as (MX)(m)M(2)(2+) were obtained with electrospray. The observed trends of the hydration energies of MXM(+) with changing positive ion M(+) or the negative ion X(-) could be rationalized on the basis of simple electrostatics. The most important contribution to the (MXM-OH(2))(+) bond is the interaction of the permanent and induced dipole of water with the positive charge of the nearest-neighbor M(+) ion. The repulsion due to the water dipole and the more distant X(-) has a much smaller effect. Therefore, the bonding in (MXM-OH(2))(+) for constant M and different X ions changes very little. Similarly, for constant X and different M, the bonding follows the hydration energy trends observed for the naked M(+) ions. The sequential hydration bond energies for MXM(H(2)O)(n)(+) decrease with n in pairs, where for n = 1 and n = 2 the values are almost equal, followed by a drop in the values for n = 3 and n = 4, that again are almost equal. The hydration energies of (MX)(m)M(+) decrease with m. The mass spectra with NaCl, obtained with electrospray and observed in the absence of water vapor, show peaks of unusually high intensities (magic numbers) at m = 4, 13, and 22. Experiments with variable electrical potentials in the mass spectrometer interface showed that some but not all of the ion intensity differentiation leading to magic numbers is due to collision-induced decomposition of higher mass M(MX)(m)(+) and M(2)(MX)(m)(2+) ions in the interface. However, considerable magic character is retained in the absence of excitation. This result indicates that the magic ions are present also in the saturated solution of the droplets produced by electrospray and are thus representative of particularly stable nanocrystals in the saturated solution. Hydration equilibrium determinations in the gas phase demonstrated weaker hydration of the magic ion (NaCl)(4)Na(+).     

Ab initio study on the adsorption of hydrated Na+ and Ag+ cations on a Ag(111) surface

The interactions of Na(+) and Ag(+) cations with an Ag(111) surface in the presence and absence of water molecules were investigated with cluster models and ab initio methods. The Ag surface was described with two-layered Ag(10) and Ag(18) cluster models, and MP2/RECP/6-31+G(d) was used as the computational method. The effect of the basis set superposition error (BSSE) was taken into account with counterpoise (CP) correction. The interactions between Na(+) and Ag(111) surface were found to be primarily electrostatic, and the interaction energies and equilibrium distances at the different adsorption sites were closely similar. The largest CP-corrected MP2 adsorption energy for Na(+) was -190.2 kJ/mol. Owing to the electrostatic nature of the Na(+)-Ag(111) interaction, Na(+) prefers to be completely surrounded by water molecules rather than directly adsorbed to the surface. Ag(+)-Ag(111) interactions were much stronger than Na(+)-Ag(111) interactions because they were dominated by orbital contributions. The largest CP-corrected MP2 adsorption energy for Ag(+) was -358.9 kJ/mol. Ag(+) prefers to adsorb on sites where it can bind to several surface atoms, and in the presence of water molecules, it remains adsorbed to the surface while the water molecules form hydrogen bonds with one another. The CP correction had an effect on the interaction energies but did not change the relative trends.     

Gas phase synthesis, structure and unimolecular reactivity of silver iodide cluster cations, Ag(n)I(m)(+) (n = 2-5, 0 < m < n)

Multistage mass spectrometry (MS(n)) experiments reveal that gas phase silver iodide cluster cations, Ag(n)I(m)(+), are readily built up in a stepwise fashion via ion-molecule reactions between mass selected silver (Ag(3)(+) and Ag(5)(+)) or silver hydride (Ag(2)H(+) and Ag(4)H(+)) cluster cations and allyl iodide, in contrast to their reactions with methyl iodide, which solely result in ligation of the clusters. The stoichiometries of these clusters range from 1 < or = n < or = 5 and 1 < or = m < or = 4, indicating the formation of several new subvalent silver iodide clusters. Collision induced dissociation (CID) experiments were carried out on each of these clusters to shed some light on their possible structures. The products arising from CID of the Ag(n)I(m)(+) clusters are highly dependent on the stoichiometry of the cluster. Thus the odd-electron clusters Ag(4)I(2)(+) and Ag(5)I(+) fragment via loss of a silver atom. In contrast, the even-electron cluster ions all fragment via loss of AgI. In addition, Ag(2)I(2) loss is observed for the Ag(4)I(3)(+) and Ag(5)I(2)(+) clusters, while loss of Ag(3)I(3) occurs for the stoichiometric Ag(5)I(4)(+) cluster. DFT calculations were carried out on these Ag(n)I(m)(+) clusters as well as the neutrals associated with the ion-molecule and CID reactions. A range of different isomeric structures were calculated and their structures are described. A noteworthy aspect is that ligation of these silver clusters by I can have a profound effect on the geometry of the silver cluster. For example, D(3h) Ag(3)(+) becomes C(2v) Ag(3)I(+), which in turn becomes C(2h) Ag(3)I(2)(+). Finally, the DFT predicted thermochemistry supports the different types of reaction channels observed in the ion-molecule reactions and CID experiments.     

Activation of the C-I and C-OH bonds of 2-iodoethanol by gas phase silver cluster cations yields subvalent silver-iodide and -hydroxide cluster cations

The gas phase ion-molecule reactions of silver cluster cations (Ag(n)(+)) and silver hydride cluster cations (Ag(m)H(+)) with 2-iodoethanol have been examined using multistage mass spectrometry experiments in a quadrupole ion trap mass spectrometer. These clusters exhibit size selective reactivity: Ag(2)H(+), Ag(3)(+), and Ag(4)H(+) undergo sequential ligand addition only, while Ag(5)(+) and Ag(6)H(+) also promote both C-I and C-OH bond activation of 2-iodoethanol. Collision induced dissociation (CID) of Ag(5)HIO(+), the product of C-I and C-OH bond activation by Ag(5)(+), yielded Ag(4)OH(+), Ag(4)I(+) and Ag(3)(+), consistent with a structure containing AgI and AgOH moieties. Ag(6)H(+) promotes both C-I and C-OH bond activation of 2-iodoethanol to yield the metathesis product Ag(6)I(+) as well as Ag(6)H(2)IO(+). The metathesis product Ag(6)I(+) also promotes C-I and C-OH bond activation.DFT calculations were carried out to gain insights into the reaction of Ag(5)(+) with ICH(2)CH(2)OH by calculating possible structures and their energies for the following species: (i) initial adducts of Ag(5)(+) and ICH(2)CH(2)OH, (ii) the subsequent Ag(5)HIO(+) product, (iii) CID products of Ag(5)HIO(+). Potential adducts were probed by allowing ICH(2)CH(2)OH to bind in different ways (monodentate through I, monodentate through OH, bidentate) at different sites for two isomers of Ag(5)(+): the global minimum "bowtie" structure, 1, and the higher energy trigonal bipyramidal isomer, 2. The following structural trends emerged: (i) ICH(2)CH(2)OH binds in a monodentate fashion to the silver core with little distortion, (ii) ICH(2)CH(2)OH binds to 1 in a bidentate fashion with some distortion to the silver core, and (iii) ICH(2)CH(2)OH binds to 2 and results in a significant distortion or rearrangement of the silver core. The DFT calculated minimum energy structure of Ag(5)HIO(+) consists of an OH ligated to the face of a distorted trigonal bipyramid with I located at a vertex, while those for both Ag(4)X(+) (X = OH, I) involve AgX bound to a Ag(3)(+) core. The calculations also predict the following: (i) the ion-molecule reaction of Ag(5)(+) and ICH(2)CH(2)OH to yield Ag(5)HIO(+) is exothermic by 34.3 kcal mol(-1), consistent with the fact that this reaction readily occurs under the near thermal experimental conditions, (ii) the lowest energy products for fragmentation of Ag(5)HIO(+) arise from loss of AgI, consistent with this being the major pathway in the CID experiments.     

Microsolvation of the sodium and iodide ions and their ion pair in acetonitrile clusters: a theoretical study

The structural and thermodynamic properties of Na+(CH3CN)n, I-(CH3CN)n, and NaI(CH3CN)n clusters have been investigated by means of room-temperature Monte Carlo simulations with model potentials developed to reproduce the properties of small clusters predicted by quantum chemistry. Ions are found to adopt an interior solvation shell structure, with a first solvation shell containing approximately 6 and approximately 8 acetonitrile molecules for large Na+(CH3CN)n and I-(CH3CN)n clusters, respectively. Structural features of Na+(CH3CN)n are found to be similar to those of Na+(H2O)n clusters, but those of I-(CH3CN)n contrast with those of I-(H2O)n, for which "surface" solvation structures were observed. The potential of mean force calculations demonstrates that the NaI ion pair is thermodynamically stable with respect to ground-state ionic dissociation in acetonitrile clusters. The properties of NaI(CH3CN)n clusters exhibit some similarities with NaI(H2O)n clusters, with the existence of contact ion pair and solvent-separated ion pair structures, but, in contrast to water clusters, both types of ion pairs adopt a well-defined interior ionic solvation shell structure in acetonitrile clusters. Whereas contact ion pair species are thermodynamically favored in small clusters, solvent-separated ion pairs tend to become thermodynamically more stable above a cluster size of approximately 26. Hence, ground-state charge separation appears to occur at larger cluster sizes for acetonitrile clusters than for water clusters. We propose that the lack of a large Na+(CH3CN)n product signal in NaI(CH3CN)n multiphoton ionization experiments could arise from extensive stabilization of the ground ionic state by the solvent and possible inhibition of the photoexcitation mechanism, which may be less pronounced for NaI(H2O)n clusters because of surface solvation structures. Alternatively, increased solvent evaporation resulting from larger excess energies upon photoexcitation or major solvent reorganization on the ionized state could account for the observed solvent-selectivity in NaI cluster multiphoton ionization.     

Surface-aligned ion-molecule reaction on the surface of a molecular crystal CD3+ + CD3I --> C2D5+ + DI

An ion-molecule reaction has been observed from a condensed molecular crystal of CD(3)I using the time-of-flight electron-stimulated desorption ion angular distribution technique. The CD(3)I multilayer is produced by growth on an ordered substrate. The reaction occurs between CD(3)(+) ions produced by electron-stimulated desorption and neighbor CD(3)I molecules in the topmost layer of the molecular crystal of CD(3)I, forming product C(2)D(5)(+) ions whose desorption dynamics have been measured. The normal momentum of the product ion is close to that of the reactant ion, suggesting that the reaction is dominated by a two-body collision, i.e., the momentum of the reactant CD(3)(+) ion governs the momentum of the product C(2)D(5)(+) ion. The ion-molecule reaction is of high cross section since the C(2)D(5)(+) yield is comparable to the CD(3)(+) yield. It is found that the yield and directionality of the emission of the C(2)D(5)(+) product ion is governed by the molecular order that is characteristic of the molecular crystal of CD(3)I. Destroying or modifying this order by using a spacer layer of H(2)O diminishes the C(2)D(5)(+) product ion yield relative to the reactant CD(3)(+) yield and broadens the ion emission directions.     

Adsorption of water molecules on selected charged sodium-chloride clusters

The adsorption of water molecules (H(2)O) on sodium chloride cluster cations and anions was studied at 298 K over a mass range of 100-1200 amu using a custom-built laser desorption ionization reactor and mass spectrometer. Under the conditions used, the cations Na(3)Cl(2)(+) and Na(4)Cl(3)(+) bind up to three water molecules, whereas the larger cations, Na(5)Cl(4)(+) to Na(19)Cl(18)(+), formed hydrates with one or two only. The overall trend is a decrease in hydration with increasing cluster size, with an abrupt drop occurring at the closed-shell Na(14)Cl(13)(+). As compared to the cluster cations, the cluster anions showed almost no adsorption. Among smaller clusters, a weak adsorption of one water molecule was observed for the cluster anions Na(6)Cl(7)(-) and Na(7)Cl(8)(-). In the higher mass region, a substantial adsorption of one water molecule was observed for Na(14)Cl(15)(-). Density functional theory (DFT) computations were carried out for the adsorption of one molecule of H(2)O on the cations Na(n)Cl(n-1)(+), for n = 2-8, and the anions Na(n)Cl(n+1)(-), for n = 1-7. For each ion, the structure of the hydrate, the hydration energy, and the standard-state enthalpy, entropy, and Gibbs energy of hydration at 298 K were computed. In addition, it was useful to compute the distortion energy, defined as the electronic energy lost due to weakening of the Na-Cl bonds upon adsorption of H(2)O. The results show that strong adsorption of a H(2)O molecule occurs for the linear cations only at an end Na ion and for the nonlinear cations only at a corner Na ion bonded to two Cl ions. An unexpected result of the theoretical investigation for the anions is that certain low-energy isomers of Na(6)Cl(7)(-) and Na(7)Cl(8)(-) bind H(2)O strongly enough to produce the observed weak adsorption. The possible implications of these results for the initial hydration of extended NaCl surfaces are discussed.     

Solvation structure of I- and Na+ on the surface of NaI aqueous solution studied by photodetachment spectroscopy in combination with mass spectrometry

We investigated solvation structures of I(-) and Na(+) on an aqueous solution surface by photodetachment spectroscopy and mass spectrometry. An aqueous solution of NaI was introduced into the vacuum as a continuous liquid flow (liquid beam), and the liquid beam was irradiated with a UV laser pulse. The abundance of electrons emitted by the laser excitation was measured as a function of wavelength (photodetachment spectroscopy). For a concentrated aqueous solution of NaI, we observe an absorption peak at longer wavelengths than the charge-transfer-to-solvent band of I(-) in solution. This feature is assigned to the photoabsorption of I(-) at the surface. This finding indicates that when the concentration of NaI is high (>1.0 M), I(-) exists on the solution surface. The identity of the ion clusters ejected from the liquid beam following selective laser excitation of I(-) on the surface or I(-) inside the solution was revealed by mass spectrometry. The mass spectra show that Na rich clusters are formed when I(-) inside the solution is excited, whereas Na rich clusters are hardly formed by the excitation of surface I(-). These findings lead us to conclude that Na(+) does not exist on the surface of the NaI aqueous solution.     

Car-Parrinello MD simulations for the Na+ -phenylalanine complex in aqueous solution

Car-Parrinello molecular dynamics (CPMD) calculations are presented for a Na (+)(Phe) complex in aqueous solution and for various stable Na (+)(Phe) complexes and Na (+)(H 2O) n clusters in the gas phase (with up to six water molecules). The CPMD results are compared to available experimental and ab initio reference data, to DFT results obtained with various combinations of density functionals and basis sets, and to previous classical mechanics MD simulations. The agreement with the reference data in the gas phase validates the CPMD method, showing that it is a valid approach for studying these systems and that it describes correctly the competing Na (+)-Phe and Na (+)-H 2O interactions. Analysis of MD trajectories reveals that the Na (+)(Phe) complex in aqueous solution maintains a stable configuration in which the Na (+) cation hovers above the phenyl ring, at an average distance of 3.85 A from the ring center, while remaining strongly bound to one of the carboxylic oxygens of Phe. Constrained MD simulations indicate that the free energy barrier opposing dissociation of the complex exceeds 5.5 kcal/mol. We thus confirm that "cation- pi" interactions between alcali cations and the pi ring, combined with other kinds of interactions, may allow aromatic amino acids to overcome the competition with water in binding a cation.     

The "missing link": the gas-phase generation of platinum-methylidyne clusters Pt(n)CH+ (n=1, 2) and their reactions with hydrocarbons and ammonia

Electrospray ionization (ESI) of tetrameric platinum(II) acetate, [Pt(4)(CH(3)COO)(8)], in methanol generates the formal platinum(III) dimeric cation [Pt(2)(CH(3)COO)(3)(CH(2)COO)(MeOH)(2)](+), which, upon harsher ionization conditions, sequentially loses the two methanol ligands, CO(2), and CH(2)COO to form the platinum(II) dimer [Pt(2)(CH(3)COO)(2)(CH(3))](+). Next, intramolecular sequential double hydrogen-atom transfer from the methyl group concomitant with the elimination of two acetic acid molecules produces Pt(2)CH(+) from which, upon even harsher conditions, PtCH(+) is eventually generated. This degradation sequence is supported by collision-induced dissociation (CID) experiments, extensive isotope-labeling studies, and DFT calculations. Both PtCH(+) and Pt(2)CH(+) react under thermal conditions with the hydrocarbons C(2)H(n) (n=2, 4, 6) and C(3)H(n) (n=6, 8). While, in ion-molecule reactions of PtCH(+) with C(2) hydrocarbons, the relative rates decrease with increasing n, the opposite trend holds true for Pt(2)CH(+). The Pt(2)CH(+) cluster only sluggishly reacts with C(2)H(2), but with C(2)H(4) and C(2)H(6) dihydrogen loss dominates. The reactions with the latter two substrates were preceded by a complete exchange of all of the hydrogen atoms present in the adduct complex. The PtCH(+) ion is much less selective. In the reactions with C(2)H(2) and C(2)H(4), elimination of H(2) occurs; however, CH(4) formation prevails in the decomposition of the adduct complex that is formed with C(2)H(6). In the reaction with C(2)H(2), in addition to H(2) loss, C(3)H(3)(+) is produced, and this process formally corresponds to the transfer of the cationic methylidyne unit CH(+) to C(2)H(2), accompanied by the release of neutral Pt. In the ion-molecule reactions with the C(3) hydrocarbons C(3)H(6) and C(3)H(8), dihydrogen loss occurs with high selectivity for Pt(2)CH(+), but in the reactions of these substrates with PtCH(+) several reaction routes compete. Finally, in the ion-molecule reactions with ammonia, both platinum complexes give rise to proton transfer to produce NH(4)(+); however, only the encounter complex generated with PtCH(+) undergoes efficient dehydrogenation of the substrate, and the rather minor formation of CNH(4)(+) indicates that C-N bond coupling is inefficient.     

Role of encapsulation of Na+ and F- ions on the Diels-Alder reactivity of C32

The density functional theory (DFT)-based Becke's three parameter hybrid exchange functional and Lee-Yang-Parr correlation functional (B3LYP) calculations have been performed to understand the role of encapsulation of Na(+) and F(-) ions on the Diels-Alder reactivity of C(32). In this context, C(32) has been taken as the dienophile and cis-1,3-butadiene has been considered as diene. Results obtained from the calculations on the Na(+)@C(32) and F(-)@C(32) have also been compared with that of C(32). It is found from the results that encapsulated Na(+) ion acts as a catalyst, whereas the encapsulated F(-) does not accelerate the reaction between C(32) and cis-1,3-butadiene. Thus, the reactivity of F(-)@C(32) is less than that of free C(32) and Na(+)@C(32). Formation of adduct involving [5,5]-B bond is preferred over other bonds. The energy decomposition analysis has been applied to understand the role of confinement on an encaged ion. The part played by the charge transfer interaction is evident from the NBO analysis. The frontier orbital analysis points out that the reaction is driven by the normal electron demand.     

Evidence for [18-Crown-6 Na]2[S2O4] in methanol and dissociation to Na2S2O4 and 18-Crown-6 in the solid state; accounting for the scarcity of simple oxy dianion salts of alkali metal crown ethers in the solid state

[18-Crown-6 Na](2)S(2)O(4) complex was prepared in methanol solution but dissociates into 18-Crown-6 ((s)) and Na(2)S(2)O(4 (s)) on removal of the solvent. Evidence for complexation in methanol is supported by a quantitative mass analysis and the dissociation in the solid state by vibrational spectroscopy and powder X-ray diffraction. These observations are accounted for by investigating the energetics of complexation in solution and dissociation in the solid state using calculated density functional theory (DFT) gas phase binding enthalpies and free energies combined with conductor-like screening model (COSMO) solvation energies and lattice enthalpy and free energy terms derived from volume based thermodynamics (VBT). Our calculations show that complexation of alkali metal dianion salts to crown ethers are much less favorable than that of the corresponding monoanion salts in the solid state and that the formation of alkali metal crown complexes of stable simple oxy-dianion (e.g., CO(3)(2-), SO(4)(2-)) salts is unlikely. The roles of complexation with 18-Crown-6 and ion pair formation in the process of dissolution of Na(2)S(2)O(4) to methanol are discussed.     

Bond dissociation energies and structures of CuNO(+) and Cu(NO)(2)(+)

The bond dissociation energies of CuNO(+), Cu(NO)(2)(+), and CuAr(+) are determined by means of guided ion beam mass spectrometry and quantum chemical calculations. From the experiment, the values D(0)(Cu(+)-NO) = 1.13 +/- 0.05, D(0)(ONCu(+)-NO) = 1.12 +/- 0.06, D(0)(Cu(+)-Ar) = 0.50 +/- 0.07, and D(0)(Cu(+)-Xe) = 1.02 +/- 0.06 eV are obtained. The computational approaches corroborate these results and provide additional structural data. The relative values of D(0)(Cu(+)-NO) and D(0)(Cu(+)-Xe) are consistent with the approximately thermoneutral formation of CuXe(+) upon interacting CuNO(+) with xenon. The sequential bond dissociation energies of Cu(NO)(2)(+) exhibit a trend similar to those of other Cu(I) complexes described in the literature. Although metathesis of nitric oxide to N(2) and O(2) is of considerable interest, no evidence for N-N- or O-O-bond formations in Cu(NO)(n)(+) ions (with n up to 3) is obtained within the energy range studied experimentally.     

MP2 study on adsorption of hydrated Na+ and Au+ cations on the Au(111) surface

The interactions of Na+ and Au+ cations with an Au(111) surface in the presence and absence of water molecules were investigated using Au18 and Au22 cluster models and the MP2 method with a triple-zeta valence basis set. The interactions between Na+ ions and the Au(111) surface were found to be primarily electrostatic, contrary to the much stronger Au+-Au(111) interactions that were dominated by orbital contributions. The largest CP-corrected MP2 adsorption energies were -156.9 kJ/mol for Na+ and -478.7 kJ/mol for Au+. When hydrated, Na+ prefers to be completely surrounded by water molecules rather than adsorbed to the surface, whereas Au+ remains adsorbed to the surface as water molecules bond with each other and with the Au surface. CP correction did not change the relative adsorption energy trends of Na+ or Au+ ions, but it had an effect on the interaction energy trends of the hydrated cations because of the weak water-surface and water-water interactions.     

First steps towards dissolution of NaSO4- by water

NaSO(4)(-)(H(2)O)(n) (n = 0-4) clusters have been generated in the gas phase as model systems to simulate the first dissolution steps of sulfate salts in water; photoelectron spectroscopy and theoretical calculations indicate that the first three water molecules strongly interact with both Na(+) and SO(4)(2-), forming a three-water solvation ring to start to pry apart the Na(+)SO(4)(2-) contact ion pair.     

Many-body potentials for aqueous Li(+), Na(+), Mg(2+), and Al(3+): comparison of effective three-body potentials and polarizable models

Many-body potentials for the aqueous Li(+), Na(+), Mg(2+), and Al(3+) ions have been constructed from ab initio cluster calculations. Pure pair, effective pair, effective three-body, and effective polarizable models were created and used in subsequent molecular dynamics simulations. The structures of the first and second solvation shells were studied using radial distribution functions and angular-radial distribution functions. The effective three-body and polarizable potentials yield similar first-shell structures, while the contraction of the O-O distances between the first and second solvation shells is more pronounced with the polarizable potentials. The definition of the tilt angle of the water molecules around the ions is discussed. When a proper definition is used, it is found that for Li(+), Mg(2+), and Al(3+) the water molecules prefer a trigonal orientation, but for Na(+) a tetrahedral orientation (ion in lone-pair direction) is preferred. The self-diffusion coefficients for the water molecules and the ions were calculated; the ionic values follow the order obtained from experiment, although the simulated absolute values are smaller than experiment for Mg(2+) and Al(3+).