One-pot synthesis of a polyrotaxane via selective threading of a PEI-b-PEG-b-PEI copolymer

A functional polyrotaxane of a PEI-b-PEG-b-PEI copolymer is synthesized in aqueous solution in a one-pot sequence. To obtain a polyrotaxane with PEG-block-selective inclusion complexes, the solution pH of the polypseudorotaxane is lowered to 4.4 in the presence of 9-anthraldehyde (AN), which triggers the expulsion of the alpha-cyclodextrins (alpha-CDs) from the flank PEI chains. Synthetic strategy of a block-selective polyrotaxane between a PEI-b-PEG-b-PEI copolymer and alpha-cyclodextrins.     

Assembly of a fluorescent cyclodextrin polyrotaxane and its detection by fluorescence microscopy

A straightforward method for the assembly of fluorescent polyrotaxanes is described here. The consecutive threading of N‐(6^I‐desoxy‐β‐cyclodextrin‐6^I‐yl)‐N′‐(5‐fluoresceinyl)‐thiourea, β‐CD‐F , and α‐CD onto poly(N,N‐dimethyliminium‐hexamethylen‐N′,N′‐dimethyliminium‐decamethylene chloride), I‐6,10 , leads to a fluorescent polyrotaxane. Free β‐CD‐F could be distinguished from threaded β ‐ CD‐F by gel electrophoresis. Since the dissociation of threaded α‐CD rings is sterically hindered, the obtained polyrotaxanes are kinetically stable at 25 °C, and they did not require further stabilization by the attachment of stopper groups at the chain ends. Single polyrotaxane entities could be visualized with both fluorescence microscopy and atomic force microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6223–6230, 2009     

New solvent for polyrotaxane. II. Dissolution behavior of polyrotaxane in ionic liquids and preparation of ionic liquid‐containing slide‐ring gels

The dissolution behavior of polyrotaxanes, consisting of α‐cyclodextrin and poly(ethylene glycol), with different molecular weights (2000 and 35,000) was investigated. Halogen‐containing ionic liquids, such as chlorides or bromides, were found to be good solvents for polyrotaxanes, regardless of their cations. Dissolution required a high temperature (above 90 °C), while intensive heating over 105 °C seemed to cause decomposition of the polyrotaxane. The discovery of new solvents for polyrotaxane was applied in the preparation of ionic liquid‐containing slide‐ring gels (SR gels), that is supramolecular networks of polyrotaxane swollen with ionic liquids, using a devised “non‐drying” technique accompanied by solvent exchange. Significant swelling of the SR gels with the ionic liquids was confirmed by dynamic mechanical measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1985–1994, 2006     

One‐pot synthesis of polyrotaxane by clipping and cyclopolymerization of α,ω‐diethynyl isophthalamide with pyridiniumdicarboxamide chloride

The one‐pot synthesis of a main chain‐type polyrotaxane composed of axle molecules threaded through the macrocyclic units on the polymer main chain was achieved via the combination of cyclopolymerization and clipping procedures. The cyclopolymerization of an α,ω‐diethynyl monomer bearing an isophthalamide moiety ( 1 ), which clips onto an axle component bearing a pyridiniumdicarboxamide moiety ( 2·Cl ) through a chloride anion was carried out in chloroform with the monomer concentration of 0.06 mol L^?1 at 40 °C using [Rh(nbd)Cl]₂/Et₃N as a catalyst to afford a gel‐free polymer. The resulting polymer was assigned to the main chain‐type polyrotaxane with a poly(phenylacetylene) backbone (poly‐ 3·Cl ) based on size exclusion chromatography and ¹H NMR measurements. The diffusion‐order two‐dimensional NMR and circular dichroism spectra provided definitive proof of the rotaxaned architecture in the polymer. The mole fraction of the rotaxane unit in the total cyclic repeating unit was determined to be 26.3%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Pillars, layers, pores and networks from nickeltripyrrins: a porphyrin fragment as a versatile building block for the construction of supramolecular assemblies

Sterically hindered nickel- tripyrrins [Ni(trpy)X] with different di-, tri- and tetradentate anions X have been prepared with the aim of finding coordination polymers formed by self-association. The syntheses were performed by simple ligand-exchange reactions and proceeded successfully with the pseudohalides CN(-), OCN(-), SCN(-), SeCN(-), N(CN)(2) (-) (dicyanoamido, dca) and C(CN)(3) (-) (tricyanomethanido, tcm), the cyanidometallates [Ag(CN)(2)](-) and [Ni(CN)(4)](2-) and the salicylate anion (sal(-)). X-ray crystallographic analyses revealed that the complexes with cyanido and isocyanato ligands, as well as the compound with a salicylato ligand, are prototypes for structurally distinct monomeric species in the solid state, whereas one-dimensional coordination polymers or supramolecular three-dimensional networks are formed from all other combinations. The polymeric compounds display a variety of individual pillar and network architectures with functionalised pores and clefts and with the Ni(trpy) fragments in different relative orientations. Hydrogen bonding and pi stacking were found to be additional structure-directing effects, which increased the structural complexity of the system. The Ni(trpy) subunit has thus been proven to be a versatile building block for the construction of supramolecular assemblies and metal organic frameworks (MOFs) from pentacoordinate Ni(II) ions.     

Polyrotaxane derivatives. I. Preparation of modified polyrotaxanes with nonionic functional groups and their solubility in organic solvents

Various polyrotaxane modification reactions, such as methylation, hydroxy propylation, tritylation, acetylation, trimethylsilylation, phenylcarbamation, dansylation, and nitration, were examined to obtain polyrotaxane derivatives, in which various functional groups were attached to cyclodextrin moieties. Although the nitrate could not be obtained because of significant degradation of the polyrotaxane under the conditions examined, other derivatives were successfully prepared under moderate conditions. The introduction of these functional groups and their degree of substitution were assessed with Fourier transform infrared and NMR spectroscopy. The polyrotaxane derivatives thus obtained were soluble in various organic solvents other than the conventional solvents (dimethyl sulfoxide and aqueous NaOH) used for the unmodified polyrotaxane. That is, the solubility of the polyrotaxane was drastically changed by the examined modification reactions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6312–6323, 2006     

Synthesis of polyrotaxanes based on α-cyclodextrin and poly(ethylene oxide)

Inclusion complexes of poly(ethylene oxide) with α-cyclodextrin are the key compounds in the synthesis of polyrotaxanes. These complexes prepared in aqueous solutions contain free cyclodextrin, which cocrystallizes with the major reaction product. These complexes dissociate upon dissolution in DMF and DMSO to form cyclodextrin and pseudopolyrotaxanes with a low cyclodextrin content. Polyrotaxane was synthesized with the use of poly(ethylene oxide)-α,ω-bis-amine as a linear component. The end-groups of the polymer in the inclusion complex were modified by the reaction with 2,4-dinitrofluorobenzene. A procedure was developed for purification of a polyrotaxane with high cyclodextrin content. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1914–1918, August, 2005.     

Preparation of biodegradable polymer nanoparticles by miniemulsion technique and their cell interactions

The emulsion/solvent evaporation method and miniemulsion technique were combined and applied in the formulation of biodegradable monodisperse nanoparticles at high solid contents using different biocompatible and biodegradable polymers such as poly(L-lactide) (PLLA), poly[(D,L-lactide)-co-glycolide] 50:50 (PLGA), and poly(epsilon-caprolactone) (PCL). Differences between the results of various polymers are found in terms of the particle size and size distribution as well as in the degradation time. An encapsulated hydrophobic fluorescent dye was used as a model marker in order to study the entrapment efficiency and diffusion yield out of the particle. Cellular uptake of the obtained particles was observed in Jurkat and HeLa cells. In the investigated particle size range of 80-200 nm, the surfactant on the particles' surface had a greater influence than the particle size. Uptake kinetics reveals that the PLLA and PCL particles are endocytosed much faster than polystyrene particles.     

5-Nitroaminotetrazole as a building block for extended network structures: Syntheses and crystal structures of a number of heavy metal derivatives

The lead, mercury, copper and silver derivatives of 5-nitroaminotetrazole (5-H₂NATZ) were obtained by the reaction between the metal nitrate and potassium 5-nitroaminotetrazolate. The lead and mercury complexes were crystallized and characterized by single crystal X-ray diffraction. The lead complex has a polymeric structure formed by (PbO₂)_n chains and anions of 5-NATZ, where each lead atom is surrounded by ten oxygen atoms. The mercury salt is constructed from neutral (Hg–NATZ)_n chains, where the mercury atom has a linear coordination. The influence of chemical hardness and charge distribution on the reactivity and coordination properties of 5-NATZ was estimated based on density functional calculations. The thermal stability of the salts was also studied.     

Preparation and properties of a biodegradable inferior vena cava filter

In this study, a new type of biodegradable inferior vena cava filter was designed and prepared based on polylactic acid. In addition to having the main functions of a common filter, it is also completely biodegradable in the human body without secondary surgical removal. The changes of surface morphology, molecular weight, viscosity, and radial support strength with degradation time were systematically investigated via degradation experiments in vitro. The results of crimping and expansion tests of the filter showed that reducing the crimping time and increasing the release time make it easier for the filter to recover to its original diameter. Further, the results of a thrombus capture experiment in vitro showed that the thrombus filtration ratio for the filter with double‐layer connection structure is 90%.     

Preparation,characterization and performances of biodegradable thermoplastic starch

A biodegradable thermoplastic starch (TPS) was successfully prepared from plasticizer ethanolamine and native cornstarch. The hydrogen bonding interaction between starch and ethanolamine was investigated using Fourier transform infrared (FT‐IR). When the ethanolamine mass content was 30%, after the ethanolamine‐plasticized thermoplastic starch (ETPS) was stored at RH 50% for 14 days, the mechanical testing showed that the maximum tensile stress of the ETPS reached 5.98 MPa, the tensile strain reached 106.52%, Young's modulus increased from 38.14 MPa of glycerol‐plasticized thermoplastic starch (GTPS) to 75.32 MPa of ETPS, and the breaking energy increased from 1.921 N·m to 2.305 N·m, which indicated that the mechanical properties of ETPS evidently excelled those of the GTPS. The effects of water contents on the mechanical properties of ETPS and GTPS were studied. A differential scanning calorimetry (DSC) analysis revealed that the low‐temperature transition and the glass transition temperature (T_g) of the ETPS were ?58 and 22°C respectively, which were lower than that of the GTPS. The ETPS effectively restrained the re‐crystallization of traditional GTPS, which was proved by the X‐ray diffraction (XRD). The scanning electron microscopy (SEM) images presented that ethanolamine made starch uniform. Copyright © 2007 John Wiley & Sons, Ltd.     

Supramolecular aggregations through the inclusion complexation of cyclodextrins and polymers with bulky end groups

Mono‐polyhedral oligomeric sillsesquioxane‐end capped poly(ε‐caprolactone) (mPPCL) can form inclusion complexes (ICs) with α‐ and γ‐cyclodextrins (CDs) but not with β‐CD. These CD ICs have been characterized with X‐ray diffraction, solid‐state ¹³C cross‐polarization/magic‐angle‐spinning NMR spectroscopy, ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy. The poly(ε‐caprolactone) (PCL) chain of mPPCL is included within the channel provided by the CDs to form a columnar, crystalline structure. The PCL/CD ratios determined by ¹H NMR spectroscopy for the ICs with α‐ or γ‐CDs are higher than the stoichiometries because of the steric hindrance of the bulky polyhedral oligomeric silsesquioxane chain end and result in a fraction of the ε‐caprolactone units free from complexation with the CDs. On the basis of these analyses, we propose some possible structures for these CD/mPPCL ICs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 125–135, 2007     

Construction of different supramolecular polymer systems by combining the host–guest and hydrogen‐bonding interactions

Poly(ethylene glycol) (PEG) can form either the inclusion complex with α‐cyclodextrins (α‐CDs) through host–guest interactions or the interpolymer complex with poly(acrylic acid) (PAA) through hydrogen‐bonding interaction. Mixing α‐CD, PEG, and PAA ternary components in an aqueous solution, the competition between host–guest and hydrogen‐bonding interactions occurs. Increasing feed ratio of α‐CD:EG:AA from 0:1:1 to 0.2:1:1 (molar ratio), various interesting supramolecular polymer systems, such as hydrogen‐bonding complex, dynamic polyrotaxane, crystalline inclusion complex, and thermoresponsive hydrogel, are successively obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1114–1120, 2008     

Synthesis and solution behavior of comb‐like terpolymers with poly(ethylene oxide) macromonomer

A novel macromonomer: p‐vinylbenzyl‐terminated octylphenoxy poly(ethylene oxide) (polymerization number: 18) (VBPEO) was synthesized. The comb‐like acrylamide‐based terpolymers (PVEA) were synthesized by aqueous free‐radical copolymerization technique using acrylamide (AM), VBPEO and sodium 2‐acrylamido‐2‐methylpropane sulphonate (NaAMPS). The macromonomer and PVEA polymer were characterized with Fourier transform infrared (FTIR) spectroscopy and proton nuclear magnetic resonance (¹H NMR). The polymers exhibited self‐assembly behavior in water and the brine solutions. The polymers could be employed in the oil reservoirs of either the high or medium to low permeability due to the low intrinsic viscosities. The optimum NaAMPS feed amount could not only increase the water solubility, but also facilitate the intermolecular associations. Implementing VBPEO into the polymer greatly increased the rigidity of molecular chains, resulting in a high apparent viscosity of the PVEA in water and the brine solutions. The PVEA brine solutions exhibited both excellent uni‐ and bi‐valent cation resistance, salt‐ and heat‐thickening twice, pseudoplastic behavior, and thixotropy. The SEM morphologies showed that the expanded polymer bundles as well as the associated structures with huge sizes were formed for PVEA in water and that the continuous network structures were still formed in the PVEA brine solutions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1241–1250, 2010     

Preparation and characterization of biodegradable microspheres containing hepatitis B surface antigen

Poly-DL-lactide-poly(ethylene glycol) (PELA) microspheres containing Hepatitis B surface antigen (HBsAg) were elaborated by a solvent extraction method based on the formation of a double water/oil/water (w/o/w) emulsion. Microspheres were characterized in terms of morphology, size and size distribution, encapsulation efficiency, and the efficiency of microsphere formation (EMF). Transmission electron microscopy (TEM) and polyacrylamide gel electrophoresis (PAGE) were used to investigate the structural integrality of HBsAg encapsulated in PELA microspheres. The release profile was investigated by the measurement of antigen present in the release medium at various intervals. The PELA-10 microspheres displayed the highest antigen encapsulation efficiency (about 80%), and antigen molecules could be stabilized in the PELA-10 microspheres during the preparation process. It suggested that the PELA microspheres had a great potential as a new polymer adjuvant for HBsAg. The release of Hepatitis B surface antigen from poly-DL-lactide-poly(ethylene glycol) microspheres.     

Synthesis of a “molecular rope curtain”: Preparation and characterization of a sliding graft copolymer with grafted poly(ethylene glycol) side chains by the “grafting onto” strategy

A sliding graft copolymer (SGC) with poly(ethylene glycol) (PEG) side chains was prepared by ester formation between terminal carboxyl groups of oxidized PEG methyl ether with molecular weight of 2000 (mPEG2000‐COOH) and hydroxyl groups of a polyrotaxane consisting of PEG and cyclodextrins (CDs). Formation of the SGC structure was confirmed by ¹H NMR, attenuated total reflectance Fourier‐transformed infrared, and gel permeation chromatography. The SGC was soluble in good solvents of PEG and insoluble in poor solvents of PEG. Estimation of the number of grafted mPEG chains suggested a “rope‐curtain” like structure, in which an mPEG chain is connected to each CD ring. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011