Determination of nanomolar lead (II) using H<Subscript>2</Subscript>O<Subscript>2</Subscript>-oxidized activated carbon modified electrode

The virgin activated carbon (AC) was oxidized by 30% H₂O₂ under the ultrasonic condition for 6 h (denoted as AC-6). The electrochemical response of Pb²⁺ at the AC-6 modified paste electrode was investigated, suggesting that AC-6 shows much higher accumulation efficiency to trace levels of Pb²⁺. Based on this, a sensitive and convenient electrochemical method was developed for the determination of Pb²⁺ utilizing the excellent properties of AC-6. In pH 3.6 HAc-NaAc buffer, Pb²⁺ was easily accumulate at the surface of AC-6 modified paste electrode, then reduced to Pb at −1.20 V. During the following anodic sweep, the reduced Pb was oxidized and resulted in an oxidation stripping peak at −0.58 V. The stripping peak current is proportional to the concentration of Pb²⁺ over the range from the 8.0 × 10⁻⁹ to 2.0 × 10⁻⁶ mol l⁻¹, and the limit of detection is as low as 2.0 × 10⁻⁹ mol l⁻¹. Finally, this newly-developed method was successfully employed to determine Pb²⁺ in water samples.     

Electrochemical determination of lead(II) using a montmorillonite calcium-modified carbon paste electrode

Utilizing the fascinating properties of montmorillonite calcium (MMT-Ca), such as huge cationic exchange capacity, strong adsorptive ability, high chemical and mechanical stability, an MMT-Ca modified carbon paste electrode (CPE) was constructed for the sensitive determination of Pb²⁺. In 0.01 mol·L⁻¹ HCl, Pb²⁺ was firstly exchanged and accumulated on an MMT-Ca modified CPE surface and secondly reduced to Pb at −0.90 V. In the following potential sweep from −0.90 to −0.50 V, reduced Pb was oxidized, resulting in an obvious stripping peak at −0.58 V. After optimizing the parameters, such as determining medium, content of MMT-Ca, accumulation potential and time, an electrochemical method was developed for the analysis of Pb²⁺. Compared with bare CPE, the MMT-Ca modified CPE significantly enhances the sensitivity of Pb²⁺ analysis. The limit of detection is evaluated to be 6.0 × 10⁻⁹ mol L⁻¹ Pb²⁺. Finally, this method was successfully employed to determine trace levels of Pb²⁺ in water samples. The first two authors contribute equally do this work     

Determination of Cd and Pb on glassy carbon electrode modified by electrochemical reduction of aromatic diazonium salts

Carbon modified by the reduction of aromatic diazonium derivatives was first used as electrode for the electrochemical stripping analysis of heavy metals. As a model, the glassy carbon electrode was modified with benzoic acid by electrochemical reduction of diazobenzoic acid, and the resulting modified electrodes were used for determination of Cd²⁺ and Pb²⁺. The anodic peak currents of cadmium and lead at the benzoic acid-modified glassy carbon electrode are 7.2 and 6 times of that at the bare glassy carbon electrode. A linear response was observed for Pb²⁺ and Cd²⁺ in the range of 0.5–50 μg/l. The detection limits are 0.20 μg/l for Pb²⁺ and 0.13 μg/l for Cd²⁺. The relative standard deviations for six consecutive measurements of 50 μg/l Cd²⁺ and 50 μg/l Pb²⁺ are 0.82% and 3.02%, respectively. Applicability of the sensor to the determination of Cd²⁺ and Pb²⁺ in sewerage samples was demonstrated.     

Electrochemical behavior of lead(II) at poly(phenol red) modified glassy carbon electrode, and its trace determination by differential pulse anodic stripping voltammetry

Poly(phenol red) (denoted as PPR) films were electrochemically synthesized on the surface of a glassy carbon electrode (GCE) by cyclic voltammetry to obtain a chemically modified electrode (denoted as PPR-GCE). The growth mechanism of PPR films was studied by attenuated total reflection spectroscopy. This PPR-GCE was used to develop a novel and reliable method for the determination of trace Pb²⁺ by anodic stripping differential pulse voltammetry. At optimum conditions, the anodic peak exhibits a good linear concentration dependence in the range from 5.0 × 10⁻⁹ to 5.0 × 10⁻⁷ mol L⁻¹ (r = 0.9989). The detection limit is 2.0 × 10⁻⁹ mol L⁻¹ (S/N = 3). The method was employed to determine trace levels of Pb²⁺ in industrial waste water samples. Correspondence: Gongjun Yang, Ming Shen, College of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002, P.R. China     

A solid-contact Pb2+-selective polymeric membrane electrode with Nafion-doped poly(pyrrole) as ion-to-electron transducer

Conducting polymer poly(pyrrole) (PPy) doped with Nafion was successfully used as ion-to-electron transducer in the construction of a solid-contact Pb²⁺-selective polymeric membrane electrode. The Nafion dopant can effectively increase the capacitance of the conducting polymer and improve the mechanical robustness of the coating. The transducer layer, PPy-Nafion, characterized by cyclic voltammetry and electrochemical impedance spectroscopy, exhibits a sufficiently high bulk (redox) capacitance and fast ion and electron transport process. The new Pb²⁺-selective polymeric membrane electrode, based on PPy-Nafion film as solid contact, shows stable Nernstian characteristics in Pb(NO₃)₂ solution within the concentration range of 1.0 × 10⁻⁷–1.0 × 10⁻³ M, and the detection limit is 4.3 × 10⁻⁸ M. The potential stability of the electrode and the influence of the interfacial water layer were also evaluated by chronopotentiometry and potentiometric water layer test, respectively. The results show that the solid-contact Pb²⁺-selective electrode, based on PPy-Nafion film as ion-to-electron transducer, can effectively overcome the potential drift and reduce the water layer between the PPy-Nafion transducer layer and the ion-selective membrane.     

Sensitive Determination of Trace Pb2+ in Seawater Using Columnar Glassy Carbon Electrode

We herein report a mercury‐free approach for the sensitive determination of trace Pb²⁺ in seawater using differential pulse stripping voltammetric (DPSV) method with a novel columnar glassy carbon electrode (CGCE). Compared with the conventional disk glassy carbon electrode with the same diameter, it has much larger electrochemical area (0.627 ± 0.003 cm²). The CGCE shows good accumulation ability and consequently acceptable behavior which makes it suitable as a working electrode in the DPSV determination of Pb2+ with the great advantage of the avoidance of harmful mercury. Using acidified artificial seawater as supporting electrolyte, there was a good linear relationship between the peak currents and the concentration of Pb²⁺ in the range of 0.6～140.0 μg L^‐1 with a detection limit of 0.3 μg/L (S/N = 3) when the accumulation time was 300 s. The method was employed to determine trace levels of Pb²⁺ in real seawater samples successfully.     

Electrocatalytic oxidation of quinine sulfate at a multiwall carbon nanotubes-ionic liquid modified glassy carbon electrode and its electrochemical determination

The electrocatalytic oxidation of quinine sulfate (QS) was investigated at a glassy carbon electrode, modified by a gel containing multiwall carbon nanotubes (MWCNTs) and room-temperature ionic liquid of 1-Butyl-3-methylimidazolium hexafluorophate (BMIMPF₆) in 0.10 M of phosphate buffer solution (PBS, pH 6.8). It was found that an irreversible anodic oxidation peak of QS with E _pa as 0.99 V appeared at MWCNTs-RTIL/glassy carbon electrode (GCE). The electrode reaction process was a diffusion-controlled one and the electrochemical oxidation involved two electrons transferring and two protons participation. Furthermore, the charge-transfer coefficient (α), diffusion coefficient (D), and electrode reaction rate constant (k _f) of QS were found to be 0.87, 7.89 × 10⁻³ cm²⋅s⁻¹ and 3.43 × 10⁻² s⁻¹, respectively. Under optimized conditions, linear calibration curves were obtained over the QS concentration range 3.0 × 10⁻⁶ to 1.0 × 10⁻⁴ M by square wave voltammetry, and the detection limit was found to be 0.44 μM based on the signal-to-noise ratio of 3. In addition, the novel MWCNTs-RTIL/GCE was characterized by the electrochemical impedance spectroscopy and the proposed method has been successfully applied in the electrochemical quantitative determination of quinine content in commercial injection samples and the determination results could meet the requirement.     

Determination of Aldehydes and Ketones in Fuel Ethanol by High-Performance Liquid Chromatography with Electrochemical Detection

A new methodology was developed for analysis of aldehydes and ketones in fuel ethanol by high-performance liquid chromatography (HPLC) coupled to electrochemical detection. The electrochemical oxidation of 5-hydroxymethylfurfural, 2-furfuraldehyde, butyraldehyde, acetone and methyl ethyl ketone derivatized with 2,4-dinitrophenylhydrazine (DNPH) at glassy carbon electrode present a well defined wave at +0.94 V; +0.99 V; +1.29 V; +1.15 V and +1.18 V, respectively which are the basis for its determination on electrochemical detector. The carbonyl compounds derivatized were separated by a reverse-phase column under isocratic conditions with a mobile phase containing a binary mixture of methanol / LiClO_4(aq) at a concentration of 1.0 × 10⁻³ mol L⁻¹ (80:20 v/v) and a flow-rate of 1.1mL min⁻¹ . The optimum potential for the electrochemical detection of aldehydes-DNPH and ketones-DNPH was +1.0 V vs. Ag/AgCl. The analytical curve of aldehydes-DNPH and ketones-DNPH presented linearity over the range 5.0 to 400.0 ng mL⁻¹, with detection limits of 1.7 to 2.0 ng mL⁻¹ and quantification limits from 5.0 to 6.2 ng mL⁻¹, using injection volume of 20 μL. The proposed methodology was simple, low time-consuming (15 min/analysis) and presented analytical recovery higher than 95%.     

Electrochemical oxidation of salicylic acid at well-aligned multiwalled carbon nanotube electrode and its detection

In this paper, an electrochemical sensor for sensitive and convenient determination of salicylic acid (SA) was constructed using well-aligned multiwalled carbon nanotubes as electrode material. Compared to the glassy carbon electrode, the electro-oxidation of SA significantly enhanced at the multiwalled carbon nanotube (MWCNT) electrode. The MWCNT electrode shows a sensitivity of 59.25 μA mM⁻¹, a low detection limit of 0.8 × 10⁻⁶ M and a good response linear range with SA concentration from 2.0 × 10⁻⁶ to 3.0 × 10⁻³ M. In addition, acetylsalicylic acid was determined indirectly after hydrolysis to SA and acetic acid, which simplified the detection process. The mechanism of electrochemical oxidation of SA at the MWCNT electrode is also discussed.     

Chemically functionalized glassy carbon spheres: a new covalent bulk modified composite electrode for the simultaneous determination of lead and cadmium

A new type of covalent bulk modified glassy carbon composite electrode has been fabricated and utilized in the simultaneous determination of lead and cadmium ions in aqueous medium. The covalent bulk modification was achieved by the chemical reduction of 2-hydroxybenzoic acid diazonium tetrafluroborate in the presence of hypophosphorous acid as a chemical reducing agent. The covalent attachment of the modifier molecule was examined by studying Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and the surface morphology was examined by scanning electron microscopy images. The electrochemistry of modified glassy carbon spheres was studied by its cyclic voltammetry to decipher the complexing ability of the modifier molecules towards Pb²⁺ and Cd²⁺ ions. The developed sensor showed a linear response in the concentration range 1–10 μM with a detection limit of 0.18 and 0.20 μM for lead and cadmium, respectively. The applicability of the proposed sensor has been checked by measuring the lead and cadmium levels quantitatively from sewage water and battery effluent samples.     

Electrochemical and impedance spectroscopy studies of various diazonium salts on a glassy carbon electrode

Abstract  

The derivatization of a glassy carbon electrode surface was achieved with and without electrochemical reduction of various diazonium salts in acetonitrile solutions. The surfaces were characterized, before and after their attachment, by cyclic voltammetry and electrochemical impedance spectroscopy to evidence the formation of a coating on the carbon surface. The results were indicative of the presence of substituted phenyl groups on the investigated surface. Also, the effects of diazonium thin films at the surface of a glassy carbon electrode, modification time, and salt concentration on their electrochemical responses in the presence of the Fe(CN)₆^3−/4− probe were investigated. Electrochemical impedance measurements indicated that the kinetics of electron transfer is slowed down when the time and the concentration used to modify the glassy carbon electrode are increased. We therefore modified a glassy carbon surface via its derivatization with and without electrochemical reduction of various diazonium salts in acetonitrile solution.     

Electrochemical sensor for Cd2+ and Pb2+ detection based on nano-porous pseudo carbon paste electrode

An electrochemical sensor based on self-made nano-porous pseudo carbon paste electrode (nano-PPCPE) has been successfully developed, and used to detect Cd²⁺ and Pb²⁺. The experimental results showed that the electrochemical performance of nanoPPCPE is evidently better than both glassy carbon electrode (GCE) and pure carbon paste electrode (CPE). Then the prepared nano-PPCPE was applied to detect Cd²⁺ and Pb²⁺ in standard solution, the results showed that the electrodes can quantitatively detect trace Cd²⁺ and Pb²⁺, which has great significance in electrochemical analysis and detection. The linear ranges between the target ions concentration and the DPASV current were from 0.1–3.0 μmol/L, 0.05–4.0 μmol/L for Cd²⁺ and Pb²⁺, respectively. And the detection limits were 0.0780 μmol/L and 0.0292 μmol/L, respectively. Moreover, the preparation of the nano-PPCPE is cheap, simple and has important practical value.     

Electrocatalytic reduction of oxygen on the surface of glassy carbon electrodes modified with plumbagin

The preparation and electrochemical characterization of glassy carbon electrodes modified with plumbagin were investigated by employing cyclic voltammetry, chronoamperometry and rotating disc electrode techniques. The cyclic voltammograms of the electroreduction of oxygen showed an enhanced current peak at approximately −0.289 V in air-saturated phosphate buffer pH = 7 and scan rate 10 mV s⁻¹. The thermodynamic and kinetic parameters of the reduction of oxygen at glassy carbon have been evaluated using cyclic voltammetry. The experimental parameters were optimized and the mechanism of the catalytic process was discussed. The obtained values of E°′ (V vs. Ag/AgCl), the apparent electron transfer rate constant k_s (s⁻¹), heterogeneous rate constant for the reduction of O₂ at the surface of the modified electrode k_h (M⁻¹ s⁻¹) and α (charge transfer coefficient of oxygen) were as follows: −0.146, 23.4, 9.9 × 10³ and 0.57, respectively. In addition, plumbagin exhibited strong catalytic activity toward the reduction of H₂O₂.     

Cyclic voltammetric investigation of Eu<Superscript>3+</Superscript> on a MWCNTs/SDS-modified glassy carbon (GC) electrode

Electrochemical reduction behavior of Eu³⁺ on a multi-walled carbon nanotubes (MWCNTs)/sodium lauryl sulfate (SDS) (MWCNTs/SDS)-modified glassy carbon (GC) electrode was investigated by cyclic voltammetry (CV). Results indicated that the electrochemical reduction process of Eu³⁺ at the MWCNTs/SDS-modified GC electrode is a quasi-reversible and diffusion-controlled process. The value of standard rate constant (k _s) at the MWCNTs/SDS-modified GC electrode was estimated to 1.96 × 10⁻² cm s⁻¹. CV studies showed that the electrochemical response of Eu³⁺ was directly related to the ratio of MWCNTs to SDS, and the tube diameter of MWCNTs had a slight influence on the electrochemical behavior of Eu³⁺, whereas the tube length. of MWCNTs had a strong influence. CVs results also proved that s-MWCNTs (with shorter tube length)-modified GC electrode showed better response to the electrochemical reaction of Eu³⁺.     

Anodic Stripping Voltammetric Determination of Lead in Tap Water at an Ordered Mesoporous Carbon/Nafion Composite film Electrode

A sensitive mercury‐free lead (Pb²⁺) sensor has been proposed based on an ordered mesoporous carbon and Nafion composite film (OMC/Nafion) coated glassy carbon electrode. The analysis of Pb²⁺ using anodic stripping voltammetry (ASV) includes two steps. Pb²⁺ ions are firstly reduced and deposited on the electrode surface in a Pb²⁺ solution (10 mL) during a preconcentration step biased at ?1.0 V, followed by a measurement step by differential pulse voltammetry (DPV) within the potential range of ?0.8 to ?0.3 V (scan rate: 20 mV/s, frequency: 20 Hz, amplitude: 50 mV, pulse width: 50 ms). Linear calibration curve was found to be from 20 nM to 2 μM for Pb²⁺ with a sensitivity of 17.4±1.38 μA/μM after a 5‐min of preconcentration. The detection limit was estimated to be around 4.60±0.12 nM at the signal to noise ratio of 3. Reproducibility (RSD%) was found to be 3.0% for a single sensor with eight measurements and 4.3% for five sensors prepared with identical procedures. The practical application of the proposed lead sensor was verified by determination of trace level of Pb²⁺ in tap water sample.     

Lead(II) and copper(II) ion-selective electrodes based on two heterocyclic compounds

In this paper, two nitrogen, sulphur or oxygen containing heterocyclic compounds were used as ionophores in ion-selective electrodes. In these two ion-selective electrodes, 2,6-di(5-methyl-1,3,4-oxadiazol-5-yl)pyridine (DMOP) gives the best Pb²⁺ sensitivity and 2,5-di(2′-methylpyridinethio)thiadiazole (DPTD) gives the best sensitivity for Cu²⁺. These electrodes are composed of KTpClPB as anion excluder and DOS as plasticizer. The two membrane electrodes show Nernstian or near-Nernstian response towards Pb²⁺ or Cu²⁺ (29.3 and 27.3 mV/decade, respectively) over the concentration range 10⁻⁵∼10⁻² and 10⁻⁶∼10⁻³ M, respectively. The response time was less than 20 sec and a good reproducibility over a period of 2 months was observed. The electrodes exhibited good selectivities over a number of alkali, alkaline earth and transition metal ions. The proposed electrodes have also been used for the direct determination of Pb²⁺ and Cu²⁺ ions in real samples.     

A novel method for the determination of Pb2+ based on the quenching of the fluorescence of CdTe quantum dots

A novel method for the determination of Pb²⁺ has been developed based on quenching of the fluorescence of thiol-capped CdTe quantum dots (QDs) by Pb²⁺ in aqueous solutions. Under optimum conditions, the relative fluorescence intensity was linearly proportional to the concentration of Pb²⁺ between 2.0 × 10⁻⁶ and 1.0 × 10⁻⁴ mol L⁻¹ with a detection limit of 2.7 × 10⁻⁷ mol L⁻¹. The relative standard deviation (RSD) was 4.6% for a 4.0 × 10⁻⁵ mol L⁻¹ Pb²⁺ solution (N = 5). As an application, the proposed method was successfully applied to the analysis of Pb²⁺ in food samples, and the results were satisfactory, i.e. consistent with those of flame atomic absorption spectrometry (FAAS). Correspondence: Heyou Han, College of Science, Institute of Chemical Biology, State Key Laboratory of Agricultural Microbiology, Huazhong Agricultural University, Wuhan 430070, P.R. China     

High-sensitivity determination of lead and cadmium based on the Nafion-graphene composite film

Graphene nanosheets, dispersed in Nafion (Nafion-G) solution, were used in combination with in situ plated bismuth film electrode for fabricating the enhanced electrochemical sensing platform to determine the lead (Pb²⁺) and cadmium (Cd²⁺) by differential pulse anodic stripping voltammetry (DPASV). The electrochemical properties of the composite film modified glassy carbon electrode were investigated. It is found that the prepared Nafion-G composite film not only exhibited improved sensitivity for the metal ion detections, but also alleviated the interferences due to the synergistic effect of graphene nanosheets and Nafion. The linear calibration curves ranged from 0.5 μg L⁻¹ to 50 μg L⁻¹ for Pb²⁺ and 1.5 μg L⁻¹ to 30 μg L⁻¹ for Cd²⁺, respectively. The detection limits (S/N = 3) were estimated to be around 0.02 μg L⁻¹ for Pb²⁺ and Cd²⁺. The practical application of the proposed method was verified in the water sample determination.     

Thermodynamic characteristics of the complexation between Pb<Superscript>2+</Superscript> and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Bis(carboxymethyl)aspartic acid in aqueous solution

The enthalpies of complexation between N,N-bis(carboxymethyl)aspartic acid (H₄Y) and the Pb²⁺ ion at 298.15 K were determined from calorimetric data for a wide range of the ionic strengths (KNO₃). The thermodynamic characteristics ΔH, ΔG, and ΔS, of formation of the complexes PbHY⁻ and PbY²⁻ were calculated for zero and fixed ionic strengths. The results obtained were interpreted.     

Voltammetric studies of polyoxometalate microparticles in contact with the reactive distillable ionic liquid DIMCARB

The voltammetry of the polyoxometalate salts [Bu₄N]₄[SiW₁₂O₄₀] (α, β, γ* isomers), [Bu₄N]₄[S₂W₁₈O₆₂] (α, γ* isomers) and [Bu₄N]₄[S₂Mo₁₈O₆₂] (α isomer) has been studied in the “distillable ionic liquid” DIMCARB (a mixture of adducts, both ionic and neutral, of dimethylamine and carbon dioxide). Dissolution of these salts tended to be slow and the anions, except [α-SiW₁₂O₄₀]⁴⁻, reacted with DIMCARB. However, high quality voltammograms were obtained from microparticles of the salts adhered to a glassy carbon electrode in contact with DIMCARB. Rapid dissolution of the reduced forms of each of the polyoxometalate anions provided reversible potential data. The higher basicity of the more highly reduced anions promoted interactions with the acidic solvent component of this medium. Comparison of reversible potentials indicated that the polarity of DIMCARB is similar to CH₃CN, but smaller than that of conventional non-volatile ionic liquids and water.