Recent Applications of α-Metalated Isocyanides in Organic Synthesis

Being both nucleophilic and electrophilic, α-metalated isocyanides can add to polar double bonds, forming heterocycles. They are also synthons for α-metalated primary amines. This article describes recent or improved procedures for their use in organic synthesis: (1) In heterocyclic syntheses to give 2-oxazolines, 2-imidazolines, 2-thiazolines, oxazoles and oligooxazoles, thiazoles, triazoles, imidazolinones, pyrroles, 5,6-dihydro-1,3-oxazines and -thiazines, and (via cycloaddition with nitrones) 2-imidazolidinones. (2) In the field of formylaminomethylenation, for example transformation of estrone methyl ether and a keto sugar into the corresponding α-formylaminoacrylic esters, and the conversion of aldehydes and ketones by 3- and 4-pyridyl-methyl isocyanides into N-(1-pyridyl-1-alkenyl)formamides and their hydrolysis to 3- and 4-acylpyridines. (3) In connection with the use of α-metalated isocyanides as synthons for α-metalated primary amines, the author demonstrates how they may be used for preparation of 1,2- and 1,3-amino alcohols, 1,2-diamines, 2,3-diaminoalkanoic acids and for synthesis of higher amino acids starting from simple amino acids.     

Fluorinated β-Sultones

Fluorinated (β)-sultones are formed on addition of sulfur trioxide to fluorinated olefins. Tetrafluoroethanesultone has been studied particularly thoroughly. The title compounds are characterized by the ease with which they undergo ring cleavage to give, e.g., derivatives of α-sulfo carboxylic acids, of sulfonic acids, of carboxylic acids, and of sulfuric acid. Fluorinated compounds of this type containing an α-hydrogen atom are especially valuable in preparative work.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Asymmetric Synthesis of α-Amino Acids from Glycine

Enantioselective synthesis of optically active α-amino acids from glycine via Schiff base employing (+)-N,N-diisopropyl-10-camphorsulfonamide as a chiral template is described.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Palladium‐catalyzed decarboxylative coupling of α,β‐unsaturated carboxylic acids with aryl tosylates

We report a general method for selective cross‐coupling of α,β‐unsaturated carboxylic acids with aryl tosylates enabled by versatile Pd(II) complexes. This method features the general cross‐coupling of ubiquitous α,β‐unsaturated carboxylic acids by decarboxylation. The transformation is characterized by its operational simplicity, the use of inexpensive, air‐stable Pd(II) catalysts, scalability and wide substrate scope. The reaction proceeds with high trans selectivity to furnish valuable (E)‐1,2‐diarylethenes.     

A Novel Method for the Synthesis of α,β‐Unsaturated Amides Mediated by Samarium Diiodide

Promoted by Samarium diiodide (SmI₂), α,β‐unsaturated amides were formed from nitrogen anions (formed in situ by the reduction of nitro compounds) and α,β‐unsaturated esters. This reaction contrasts with the conjugate addition between amines and α,β‐unsaturated esters promoted by samarium triiodide (SmI₃) and provides an alternative attractive way to obtain α,β‐unsaturated amides using SmI₂.     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

3-Amino-2H-Azirines. Synthons for α,α-Disubstituted α-Amino Acids in Heterocycle and Peptide Synthesis [New Analytical Methods (43)]

The recent upswing in peptide chemistry has been accompanied by an increasing interest in nonproteinogenic amino acids. These include the α,α-disubstituted glycines, the best known of which is Aib (2-aminoisobutyric acid, 2-methylalanine). These α-amino acids occur in natural oligopeptides such as the peptaibols, a class of membrane-active ionophores that has been isolated from fungal cultures. The twofold substitution at the α-C atom of the amino acids severely restricts the conformational freedom of the peptides and causes particular secondary structures to be favored; thus, α, α-disubstituted α-amino acids induce the formation of β turns or helices. 3-Amino-2H-azirines are ideal synthons for the construction of oligopeptides, cyclic peptides and depsipeptides (peptolides) containing such α,α-disubstituted α-amino acids. The presence of the ring strain in these molecules means that they can be used in peptide coupling without the need for additional activating reagents. Using 3-amino-2H-azirines a large array of heterocycles containing α, α-disubstituted α-amino acids as structural elements within their skeleton can be synthesized. The driving force in these reactions is the release of the strain on the three-membered ring, which usually takes place in a ring-expansion reaction. The mechanistic elucidation of these reactions, which can be quite complex, contains some surprises.     

Preparation,characterization and properties of β-chitin and N-acetylated β-chitin

Free amino groups in β-chitin from squid pen were acetylated to obtain N-acetylated β-chitin. After careful control of degree of acetylation, thermal and mechanical properties of β-chitin and N-acetylated β-chitin were compared. The structural differences of β-chitin and N-acetylated β-chitin were characterized by Fourier transform infrared (FTIR) and wide-angle x-ray diffraction (WAXD) analysis. The results indicated that the crystallinity of N-acetylated β-chitin was higher than that of β-chitin and N-acetylated β-chitin exhibited characteristics similar to α-chitin. Equilibrium water content (EWC) of β-chitin reached to about 50% and this hydrophilic nature was assumed to be caused by a relatively weak hydrogen bonding force of β-chitin with parallel main chains. On the other hand, EWC of N-acetylated β-chitin was 40% due to the introduction of ordered structure. β-chitin and N-acetylated β-chitin have the tensile strength of 0.4 and 0.7 Mpa in the swollen state, respectively. Viscoelastic properties and thermal relaxation behaviors were investigated by dynamic mechanical thermal analysis (DMTA). DMTA spectra of these samples showed that α-transition peaks of β-chitin and N-acetylated β-chitin were observed at 170 and 190°C, respectively. These relaxation peak maxima were assigned to be their glass transition temperature. In addition, a second relaxation peak of β-chitin resulting from acetamide groups was found at 112°C and a broad relaxation peak of N-acetylated β-chitin at around 81–100°C. As a result of thermogravimetric analysis, 10% weight loss temperatures of β-chitin and N-acetylated β-chitin were 270 and 285°C, respectively. © 1996 John Wiley & Sons, Inc.     

Preparation of α-Bromo- and α-Chlorocarboxylic Acids from α-Amino Acids

Diazotization of α-amino acids in 48:52 (w/w) hydrogen fluoride/pyridine along with excess of potassium halide results in the corresponding α-halocarboxylic acids in good to excellent yields (Table 1 and 2).     

Reactions of 3, 5-Dimethyl-4-Carbethoxy-2-Cyclohexen-1-One at α-Position

3, 5-Dimethyl-4-carbethoxy-2-cyclohexen-1-one has been synthesized through the Knoevenagel condensation¹, which is then subjected to alkylation and acylation at α-position. The resulting products are hydrolyzed and decarboxylated to α-substituted cyclohexenones. 3, 5-Dimethyl-2-cyclohexen-1-one is converted by N-bromosuccinimide to phenol via enolization².     

Amino acid‐based bioanalogous polymers. Synthesis,and study of regular poly(ester amide)s based on bis(α‐amino acid) α,ω‐alkylene diesters,and aliphatic dicarboxylic acids

The purpose of this research was to synthesize new regular poly(ester amide)s (PEAs) consisting of nontoxic building blocks like hydrophobic α‐amino acids, α,ω‐diols, and aliphatic dicarboxylic acids, and to examine the effects of the structure of these building block components on some physico‐chemical and biochemical properties of the polymers. PEAs were prepared by solution polycondensation of di‐p‐toluenesulfonic acid salts of bis‐(α‐amino acid) α,ω‐alkylene diesters and di‐p‐nitrophenyl esters of diacids. Optimal conditions of this reaction have been studied. High molecular weight PEAs (M_w = 24,000–167,000) with narrow polydispersity (M_w/M_n = 1.20–1.81) were prepared under the optimal reaction conditions and exhibited excellent film‐forming properties. PEAs obtained are mostly amorphous materials with T_g from 11 to 59°C. α‐Chymotrypsin catalyzed in vitro hydrolysis of these new PEA substrates was studied to assess the effect of the building blocks of these new polymers on their biodegradation properties. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 391–407, 1999     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

Stereoselective reduction of α-substituted β-keto esters by hydrostannane/organotin triflate

Stereoselective reduction of α-substituted β-keto esters is achieved by the combined use of hydrostannane/organotin triflate. syn-Aldols are obtained with more than 90% selectivities.     

Phosphoryl group differentiating α‐amino acids from β‐ and γ‐amino acids in prebiotic peptide formation

In recent years β‐amino acids have increased their importance enormously in defining secondary structures of β‐peptides. Interest in β‐amino acids raises the question: Why and how did nature choose α‐amino acids for the central role in life? In this article we present experimental results of MS and ³¹P NMR methods on the chemical behavior of N‐phosphorylated α‐alanine, β‐alanine, and γ‐amino butyric acid in different solvents. N‐Phosphoryl α‐alanine can self‐assemble to N‐phosphopeptides either in water or in organic solvents, while no assembly was observed for β‐ or γ‐amino acids. An intramolecular carboxylic–phosphoric mixed anhydride (IMCPA) is the key structure responsible for their chemical behaviors. Relative energies and solvent effects of three isomers of IMCPA derived from α‐alanine (2a–c), with five‐membered ring, and five isomers of IMCPA derived from β‐alanine (4a–e), with six‐membered ring, were calculated with density functional theory at the B3LYP/6‐31G** level. The lower relative energy (3.2 kcal/mol in water) of 2b and lower energy barrier for its formation (16.7 kcal/mol in water) are responsible for the peptide formation from N‐phosphoryl α‐alanine. Both experimental and theoretical studies indicate that the structural difference among α‐, β‐, and γ‐amino acids can be recognized by formation of IMCPA after N‐phosphorylation. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 232–241, 2003     

Preparation and antibacterial activity of aromatic derivatives of β-aminopropionic and γ-aminobutyric acid

Ten aromatic derivatives of β-aminopropionic acid and γ-aminobutyric acid were prepared.Their compositions and structures were identified by elemental analysis,IR,and 1H NMR.They have been examined for their antibacterial action against Staphylococcua aurens and Escherichia coli.These compounds showed higher activity than the aromatic derivatives of ct-amino acid which were reported previously.The general conclusion to be drawn is that the distance between amino and carboxylic group in these molecules could affect their antibacterial activity.Furthermore,those compounds with p-methyl substituent in phenyl ring exhibit higher activity than the others,and all the compounds exhibit higher activity against Escherichia coli and against Staphylococcua aureus.     

Polymerization and copolymerization of α-alkylacrylic acids and characterization of their polymers

α-Alkylacrylic acids (RAA's) bearing n-alkyl groups were found to homopolymerize with slower rates than acrylic and methacrylic acids to number-average molecular, weight (M?_n) of 10⁴ or above. When the α-substituent was a branched alkyl group, the polymerization rate and M?_n decreased further. Reactivities of RAA's in copolymerization were interpreted by steric and resonance effects of the alkyl group using Hancock's steric substituent constant. Comparison of the reactivities of RAA's with those of methyl α-alkylacrylates revealed that replacement with the smaller carboxyl group facilitates polymerization and copolymerization. Preference of co-syndiotactic propagation in the copolymerization of methacrylic acid with styrene changed to random fashion in the copolymerization of the α-higher alkyl derivatives. After methylation with diazomethane, the homopolymers were shown to be thermally less stable than poly(methyl methacrylate). T_g's of poly(methyl α-ethylacrylate) and poly(methyl α-n-propylacrylate) were 57 and 25°C, respectively.     

Crystallographic report: The [bis(η5‐cyclopentadienyl)titanium(IV)‐bis(L‐methionine)] dichloride

The structure of ionic complex [Cp₂Ti(L -Met)₂]²⁺[Cl⁻]₂ (where Cp = η⁵-C₅H₅) possessing C₂ symmetry is presented. Discrete cationic units with distorted tetrahedral geometry around the central titanium atom are connected through intermolecular H···Cl bonds between ammonium group protons of α-amino acid ligands and chloride anions. Copyright © 2004 John Wiley & Sons, Ltd.