Thermosensitive poly(N-isopropylacrylamide-co-acrylamide) hydrogels: Synthesis, swelling and interaction with ionic surfactants

Thermosensitive hydrogels were prepared by free-radical polymerization in aqueous solution from N-isopropylacrylamide (NIPA) and acrylamide (AAm) monomers. N,N-Methylenebis(acrylamide) (MBAAm) was used as a crosslinker. A kinetic study of the absorption determined the transport mechanism. The diffusion coefficients of these hydrogels were calculated for the Fickian mechanism. It was shown that the swelling behavior of the P(NIPA-co-AAm) hydrogels can be controlled by changing the amount of MBAAm. The swelling equilibrium of the P(NIPA-co-AAm) hydrogels was also investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB). In SDS and DTAB solutions, the equilibrium swelling ratio of the hydrogels increased, this is ascribed to the conversion of non-ionic P(NIPA-co-AAm) hydrogel into polyelectrolyte hydrogels due to binding of surfactant molecules through the hydrophobic interaction. Additionally, the amount of free SDS and DTAB ions was measured at different temperatures by a conductometric method, it was found that the electric conductivity of the P(NIPA-co-AAm)—surfactant systems depended strongly on both the type and concentration of surfactant solutions.     

Effect of type and concentration of surfactants on swelling behavior of poly[<Emphasis Type="Italic">N</Emphasis>-[3-(dimethylamino)propyl]methacrylamide-co- <Emphasis Type="Italic">N,N</Emphasis>-methylenebis(acrylamide)] hydrogels

A series of thermosensitive hydrogels were prepared from N-[3-(dimethylamino)propyl]methacrylamide (DMAPMA) monomer by using 11.6–17.8% (m/m) N,N-methylenebis(acrylamide) (MBAAm) as the crosslinker and comonomer in water. A kinetic study of the absorption determined the transport mechanism. The diffusion coefficients of these hydrogels were calculated for the Fickian mechanism. It was shown that the swelling behavior of the P(DMAPMA-co-MBAAm) hydrogels can be controlled by changing the amount of MBAAm. The swelling equilibrium of the P(DMAPMA-co-MBAAm) hydrogels was also investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB). In pure water, irrespective of the amount of MBAAm, the P(DMAPMA-co-MBAAm) hydrogels showed a discontinuous phase transition between 30 and 40 °C. However, the transition changed from discontinuous to continuous with the addition of surfactants, this is ascribed to the conversion of non-ionic P(DMAPMA-co-MBAAm) hydrogel into polyelectrolyte hydrogels due to binding of surfactants through the hydrophobic interaction. Additionally, the amount of free SDS and DTAB ions was measured at different temperatures by a conductometric method, it was found that the electric conductivity of the P(DMAPMA-co-MBAAm) – surfactant systems depended strongly on both the type and concentration of surfactant solutions.     

Sorption of a fluorescent whitening agent (Tinopal CBS) onto modified cellulose fibers in the presence of surfactants and salt

The combined effect of salt (10 mmol L(-1)) and surfactants on the sorption of the fluorescent brightener 4,4'-distyrylbiphenyl sodium sulfonate (Tinopal CBS) onto modified cellulose fibers was studied. Sorption efficiencies with both cationic and anionic surfactants were evaluated. Emission spectroscopy was used for quantitative analysis since Tinopal has an intense fluorescence. The sorption efficiency of the brightener is greater for solutions containing a cationic surfactant (DTAC) below the critical micelle concentration (cmc), while for an anionic surfactant (SDS) above its cmc the efficiency is greater. The profile of the sorption isotherms were interpreted in terms of the evolution of surfactant aggregation at the fiber/solution interface. Salt influences the efficiency of the Tinopal sorption on the modified cellulose fibers either because it decreases the cmc of the surfactants or because the ions screen the surface charges of the fiber which decreases the electrostatic interaction among the charged headgroup of the surfactant and the charged fiber surface.     

Surfactant head group and concentration influence on structure and dynamics of gellan gum hydrogels: Crossover from stretched to compressed exponential

In the present study, we have investigated the effects of surfactant addition on the structure and dynamics of gellan gum hydrogels. A strong interaction is seen between gellan gum and oppositely charged cationic surfactant, hexadecyltrimethylammonium bromide (CTAB) whereas rather weak or minimal interactions are observed when either anionic surfactant, sodium dodecylsulfate (SDS), or nonionic surfactant, Triton X-100 is added to the system. The dynamics of the hydrogels was studied, using dynamic light scattering measurements and the heterodyne method was used for data evaluation. The correlation function of parent hydrogel was fitted with a stretched exponential function, while a single plus stretched exponential function was employed to study the dynamics of hydrogel with surfactants and the corresponding relaxation times were appropriately analyzed. An interesting crossover from stretched to compressed exponential was seen when CTAB was added beyond critical micellar concentration to the system, which was not evidenced for the other two surfactants. Ensemble averaged intensity was also analyzed and the general picture that emerges is that the oppositely charged surfactant has the strongest ability to form large associations as oppose to nonionic and like-charged surfactants. The rheological measurements were carried out to determine the elastic response of the gels over a wide range of frequencies. It was seen that the elastic modulus was dependent on both the surfactant concentration and type. Cationic surfactant increased the elastic modulus markedly as opposed to the nonionic and anionic surfactants. These results may have implications for the use of polymer surfactant systems as potential products.     

Role of surfactants in the sorption of the whitening agent Tinopal CBS onto viscose fibers: a fluorescence spectroscopy study

In the present work, we studied the role of an anionic surfactant, sodium dodecyl sulfate, and a cationic surfactant, dodecyltrimethylammonium chloride, in the sorption of 4,4'-distyrylbiphenyl sodium sulfonate (Tinopal CBS) onto modified cellulose fibers. Fluorescence spectroscopy was used to quantify the amount of sorbed Tinopal CBS on the fiber surface. Differences in the spectral properties and the efficiency of sorption of the whitener/surfactant/fiber system are explained in terms of electrostatic interactions. Our results also show that the sorption efficiency is greater for solutions containing cationic surfactants only below the critical micelle concentration, while anionic surfactants show a smooth influence on the sorption process.     

Anionic–Nonionic Mixed Surfactant Systems: Micellar Interaction and Thermodynamic Behavior

The interactions between an anionic surfactant, viz., sodium dodecylbenzenesulfonate and nonionic surfactants with different secondary ethoxylated chain length, viz., Tergitol 15-S-12, Tergitol 15-S-9, and Tergitol 15-S-7 have been studied in the present article. An attempt has also been made to investigate the effect of ethoxylated chain length on the micellar and the thermodynamic properties of the mixed surfactant systems. The micellar properties like critical micelle concentration (CMC), micellar composition (X_A), interaction parameter (β), and the activity coefficients (f_A and f_NI) have been evaluated using Rubingh's regular solution theory. In addition to micellar studies, thermodynamic parameters like the surface pressure (Π_CMC), surface excess values (Γ_CMC), average area of the monomers at the air–water interface (A_avg), free energy of micellization (ΔG_m), minimum energy at the air–water interface (G_min), etc., have also been calculated. It has been found that in mixtures of anionic and nonionic secondary ethoxylated surfactants, a surfactant containing a smaller ethoxylated chain is favored thermodynamically. Additionally, the adsorption of nonionic species on air/water interface and micelle increases with decreasing secondary ethoxylated chain length. Dynamic light scattering and viscometric studies have also been performed to study the interactions between anionic and nonionic surfactants used.     

Multiple-stimulus-responsive hydrogels of cationic surfactants and azoic salt mixtures

New hydrogels having high water content, ～96 wt%, composed of cationic surfactants, alkyltrimethylammonium bromides (C _n TAB, n?=?12, 14, 16, and 18), and a small dye molecule, sodium azobzenzene 4,4′-dicarboxylic acid (AzoNa₂), was firstly obtained. The three-dimensional network structures of hydrogels were determined by transmission electron microscopy images, scanning electron microscopy images, ¹H nuclear magnetic resonance, and small-angle X-ray scattering measurements. The mechanism of hydrogel formation was also illustrated. The rheological data were obtained to investigate the mechanical strength of hydrogels, which were turned out to be strong mechanical strength (～10⁴ Pa) materials. We found that the strength of the hydrogel depends on the fiber density, which can be controlled by changing the proportion of the two compounds, concentration of surfactants, temperature, and the chain length of the surfactant. Interestingly, the hydrogels were found to have a multiple-stimulus response property. A reversible thermal, UV–vis, or a chemical response was investigated in the mixtures of cationic surfactants and azoic salt for the first time. These findings may find potential applications such as sensors, actuators, shape memories, and drug delivery systems, etc.

Surfactant Diffusion Near Critical Micelle Concentrations

Taylor dispersion and differential refractometry are used to measure mutual diffusion coefficients (D) for binary aqueous solutions of octylglucopyranoside, dodecylsulfobetaine, and sodium dodecyl sulfate (nonionic, zwitterionic and ionic surfactants, respectively). Aggregation causes a sharp drop in D as the concentration of each surfactant is raised through the critical micelle concentration (cmc). Differential mutual diffusion coefficients are determined in this composition region by using small initial concentration differences (3 mmol-dm^–3) and by extrapolating the measured D values to zero initial concentration difference relative to the carrier stream. The drop in D for each surfactant is more gradual than the concentration dependence predicted by the chemical equilibrium model of surfactant diffusion. Micelle polydispersity and nonideal solution behavior are discussed as possible explanations for this discrepancy. Intradiffusion coefficients (D*) for aqueous octylglucopyranoside and dodecylsulfobetaine are evaluated by integrating the relation d(cD*) = Ddc previously derived for dilute solutions of self-associating nonelectrolyte solutes.     

Simultaneous purification of sewage from Cd(II) and nonionic surfactant with cation exchanger

The sorption of nonionic surfactant (alkylmonoethers ALM-10), taking place simultaneously with the sorption of Cd(II) in H-form of polyacrylic cation exchangers KB-2 and KB-2-12P was investigated. Increasing the sorption of surfactant the decrease in both the stability of Cd(II) complex with cation exchanger and the equilibrium sorption of Cd(II) was observed. The isotherms of the sorption were measured; the coefficients of intraparticle diffusion (D) were calculated. The integration of the filter filled with polyacrylic cation exchanger into the system of sewage purification is suggested.     

Nonionic surfactant sorption onto the bacterial cell surface: a multi-interaction isotherm

The adsorption of linear polyoxyethylene (POE) alcohol surfactants of the form CxEy onto the surface of a Sphingomonas sp. has been examined. For this study, the alkyl chain length (x) was fixed at 12 and the POE chain length (y) was varied, with y = 4, 7, 9, 10, and 23 ethylene oxide units. Langmuirian isotherms were observed for C12E4 and C12E23, and more complex isotherms were observed for the three intermediate POE chain length surfactants, with C12E7 and C12E9 exhibiting strong S-shaped isotherms. All isotherms showed plateaus near the critical micelle concentration (CMC) with the plateau decreasing with increasing POE chain length. A simple multi-interaction isotherm is proposed that models the sorption isotherm as the sum of two interactions. The first interaction describes monolayer adsorption, whereas the second interaction describes lateral interactions between sorbed surfactant molecules and the formation of surface aggregates. Varying ratios of these two interactions as a function of POE chain length gives rise to the variety of observed isotherm shapes. Results of the isotherm analysis suggest that lateral interactions dominate for surfactants with low POE chain lengths, and the lateral interactions decrease as the POE chain length is increased.     

Polymers as Hydrophobic Adsorbent Surface for Some Surfactants

Polyvinyl alcohol (PVA) and polyacrilic acid (PAA) were used as hydrophobic adsorbent surfaces at 25°C for two nonionic surfactants, namely, tetradecyl polyoxyethylenated monolaurate [La(EO)₁₄] and tetradecyl polyoxyethylenated monooleate [Ol(EO)₁₄], and two anionic surfactants, namely, sodium oleic sulfonate [OlSO₃Na] and sodium dodecyl benzene sulfonate [SDBS]. Surface tension measurements were performed to determine the critical micelle concentration (CMC) and the adsorption isotherms of the tested surfactants. All the tested surfactants display L-shape isotherms except that of OlSO₃Na onto PVA. No adsorption behavior has been shown for the anionic SDBS onto both PVA and PAA. The adsorption data show higher adsorption affinity for all the tested nonionic surfactants onto PAA than onto PVA while the investigated anionic surfactant OlSO₃Na possesses close values of Γ_max. The study reveals that the nature of the polymer surface as adsorbent besides the molecular structure of the surfactant defined the types and mechanisms of adsorption.     

Interfacial and Thermodynamic Properties of Anionic‐Nonionic Mixed Surfactant System: Influence of Hydrophobic Chain Length of the Nonionic Surfactant

The influence of hydrophobic chain length in nonionic surfactants on interfacial and thermodynamics properties of a binary anionic‐nonionic mixed surfactant was investigated. In this study, nonionic surfactants lauric‐monoethanolamide (C₁₂ MEA) and myrisitic‐monoethanolamide (C₁₄ MEA) were mixed with an anionic surfactant, α‐olefin sulfonate (AOS). The critical micelle concentration (cmc), maximum surface excess (Γ_max), and minimum area per molecule (A_min) were obtained from surface tension isotherms at various temperatures. The thermodynamic parameters of micellization and adsorption were also computed. Micellar aggregation number (N_agg), micropolarity, and binding constant (K_sv) of pure and mixed surfactant system was calculated by fluorescence measurements. Rubingh's method was applied to calculate interaction parameters for the mixed surfactant systems.     

Effect of terbium(III) chloride on the micellization properties of sodium decyl- and dodecyl-sulfate solutions

The effect of TbCl3 on the aggregation processes of the anionic surfactants sodium decyl sulfate (SDeS) and sodium dodecyl sulfate (SDS) has been investigated. Electrical conductivity data, combined with Tb(III) luminescence measurements suggest that the formation of micelles involving TbCl3 and SDS occurs at concentrations below the critical micelle concentration (cmc) of the pure surfactants; the formation of these mixed aggregates was also monitored by light scattering, which indicates that the addition of TbCl3 to surfactant concentration at values below the pure surfactant cmc results in a much greater light scattering than that found with pure sodium alkylsulfate surfactant micelles. This phenomenon is dependent upon the alkyl chain length of the surfactant. With Tb(III)/DS-, complexes are formed with a cation/anion binding ratio varying from 3 to 6, which depends upon the initial concentration of Tb(III). This suggests that the majority of the cation hydration water molecules can be exchanged by the anionic surfactant. When the carbon chain length decreases, interactions between surfactant and Tb(III) also decrease, alterations in conductivity and fluorescence data are not so significant and, consequently, no binding ratio can be detected even if existing. The surfactant micellization is dependent on the presence of electrolyte in solution with apparent cmc being lower than the corresponding cmc value of pure SDS.     

Drop impact on surfactant films and solutions

Drops impacting on horizontal aqueous surfactant films have been analyzed using a high-speed camera. Drops of either water or aqueous surfactant solutions had a diameter of 2.4?±?0.4 mm and impacted with a velocity of 0.1 to 1.3 m/s. As surfactants, anionic sodium dodecyl sulfate and cationic cetyltrimethyl ammonium bromide were used. Pure water drops impacting on freestanding surfactant films showed coalescence, bouncing, partial bouncing, passing, and partial passing. For bouncing, the concentration of surfactant in the surfactant film must exceed the critical micelle concentration. When surfactant was added to the drop, coalescence and partial passing were suppressed. We attribute the different behavior to different hydrodynamic boundary conditions at the surface of pure water and surfactant solution, leading to different repulsive hydrodynamic forces arising when the air has to flow out of the closing gap between the two liquid surfaces. The boundary condition changes as a function of surfactant concentration from a slip to no-slip, leading to stronger hydrodynamic repulsion. In addition, estimates of the characteristic velocities show that diffusion of air into the water is slow and can only account for the very last thinning of the air gap before coalescence.     

Physicochemistry of interaction between the cationic polymer poly(diallyldimethylammonium chloride) and the anionic surfactants sodium dodecyl sulfate, sodium dodecylbenzenesulfonate, and sodium N-dodecanoylsarcosinate in water and isopropyl alcohol-water media

The physicochemistry of interaction of the cationic polymer poly(diallyldimethylammonium chloride) (PDADMAC) with the anionic surfactants sodium dodecyl sulfate, sodium dodecylbenzenesulfonate, and sodium N-dodecanoylsarcosinate was studied in detail using tensiometry, turbidimetry, calorimetry, viscometry, dynamic light scattering (DLS), and scanning electron microscopy (SEM). Fair interaction initially formed induced small micelles of the surfactants and later on produced free normal micelles in solution. The interaction process yielded coacervates that initially grew by aggregation in the aqueous medium and disintegrated into smaller species at higher surfactant concentration. The phenomena observed were affected by the presence of isopropyl alcohol (IP) in the medium. The hydrodynamic sizes of the dispersed polymer and its surfactant-interacted species were determined by DLS measurements. The surface morphologies of the solvent-removed PDADMAC and its surfactant-interacted complexes from water and IP-water media were examined by the SEM technique. The morphologies witnessed different patterns depending on the composition and the solvent environment. The head groups of the dodecyl chain containing surfactants made differences in the interaction process.     

Thermodynamic study of adsorption of homologous anionic and cationic surfactants

The simplified form of an integral adsorption isotherm based on Butler's equation was applied to describe surface behavior of a series of anionic (sodium alkylsulfonates) and cationic (alkylpyridinium halides) surfactants. This theory allows for the calculation of the free energy of adsorption (Delta G jk) value corresponding to the ability of a particular surfactant to undergo adsorption. The obtained results indicate that the value of Delta G jk depends linearly on the length of the hydrocarbon chain as well as on the kind and concentration of the added inorganic electrolyte. Moreover, it has been found that in the case of surfactants, which have the same length of the alkyl chain and adsorb from solutions containing the same inorganic electrolyte, the charge of hydrophilic group has insignificant influence on the value of Delta G jk.     

Swelling behavior of poly{N‐[3‐(dimethylaminopropyl)] methacrylamide‐co‐acrylamide} hydrogels in aqueous solutions of surfactants

Temperature sensitive poly{N‐[3‐(dimethylaminopropyl)]methacrylamide‐co‐acrylamide} [P(DMAPMA‐co‐AAm)] hydrogels were prepared by the free‐radical crosslinking copolymerization of corresponding monomers in water with N,N‐methylenebisacrylamide as the crosslinker, ammonium persulfate as the initiator, and N,N,N′,N′‐tetramethylethylenediamine as the activator. The swelling equilibrium of the P(DMAPMA‐co‐AAm) hydrogels was investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate and the cationic surfactant dodecyltrimethylammonium bromide. In pure water, regardless of the amount of N,N‐methylenebisacrylamide, the P(DMAPMA‐co‐AAm) hydrogels showed a discontinuous phase transition between 30 and 36 °C. However, the transition temperature changed from discontinuous to continuous with the addition of surfactants; this was ascribed to the conversion of nonionic P(DMAPMA‐co‐AAm) hydrogels into polyelectrolyte hydrogels due to the binding of surfactants through hydrophobic interactions. Additionally, the concentrations of free sodium dodecyl sulfate and dodecyltrimethylammonium bromide ions were measured at different temperatures by conductometry, and it was found that the electric conductivity of the P(DMAPMA‐co‐AAm)–surfactant systems depended strongly on the swelling ratio; most notably, it changed drastically near the phase‐transition temperature of the P(DMAPMA‐co‐AAm) hydrogel. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1645–1652, 2006     

Mixed micellar properties of cationic trimeric-type quaternary ammonium salts and anionic sodium n-octyl sulfate surfactants

The properties of quaternary ammonium salt-type cationic trimeric surfactants (m-2-m-2-m, m represents the carbon atom number in alkyl chain lengths of 8, 10, and 12) and oppositely charged anionic monomeric surfactant, sodium n-octyl sulfate (SOS), were characterized by employing several techniques such as static surface tension, fluorescence spectroscopy, and dynamic light-scattering measurements. The critical micelle concentrations (cmc) of m-2-m-2-m were much lower than those of the corresponding dimeric and monomeric surfactants, and decreased with increasing chain length. The addition of SOS to m-2-m-2-m solutions resulted in a further decrease of the cmc. The mixed surfactants showed higher efficiencies in lowering the surface tension than the individual surfactants. The fluorescence measurements suggested the formation of mixed micelles with a hydrophobic environment in the solutions even at lower concentrations. The dynamic light-scattering study indicated the presence of two different kinds of aggregates with different hydrodynamic diameters. The larger one was attributed to the mixed micelle of m-2-m-2-m and SOS. These results indicated a decline of the electrostatic repulsion between cationic head groups through the incorporation of anionic surfactant into the mixed surfactants.     

Determination of the surfactant density on SWCNTs by analytical ultracentrifugation

We report on the extensive characterization of single-walled carbon nanotubes (SWCNTs) dispersed in a variety of surfactants, such as sodium dodecyl benzene sulfonate (SDBS), sodium cholate (SC), and three synthesized perylene-based surfactants, by using differential sedimentation in H(2)O and D(2)O. Multidimensional evaluation of the absorption profiles over radius, wavelength, and time allows the determination of the anhydrous specific volumes of the SWCNT-surfactant complexes as well as the concentration of the surfactant reservoir in free micelles with very slow sedimentation coefficients (<1 Svedberg). Among the perylene bisimide surfactants, the smallest derivative is densely adsorbed on the nanotube backbone with an anhydrous specific volume significantly above that of SC or SDBS. Bulky Newkome dendritic groups on one or both ends of the perylene moiety gradually reduce the adsorption density, in accord with the absolute adsorption between 0.66 and 1.7 mmol surfactant per gram SWCNTs. Furthermore, hydrodynamic analysis reveals that SDBS favors the "tails-on" configuration. The distribution of sedimentation coefficients of SWCNTs prepared by high-pressure carbon monoxide decomposition (HiPco) is broader and shifted to faster sedimentation than those prepared by using cobalt-molybdenum catalysis (CoMoCAT), which reflects the polydispersity in diameter and length.     

Sorption behavior of gamma-irradiated silica gel

The effect of Pb(II) and non-ionic surfactants (oxyethylate alcohols OS-10 and ALM-10) on the rate of intraparticle diffusion and on to the equilibrium sorption on Purolite C 106 cation exchanger in hydrogen form was investigated. The sorption of Pb(II) cations and in free state and bonded to the surfactant was measured. The coefficients of intraparticle diffusion were also calculated.