Measurement of solid-liquid interfacial energy for solid Zn in the Zn-Cd eutectic system

The equilibrated grain boundary groove shapes for the Zn solid solution in Zn-Cd liquid solutions were directly observed. From the observed grain boundary groove shapes, the Gibbs-Thomson coefficient for solid Zn (Zn-15 wt.% Cd) in Zn-Cd liquid solutions has been determined to be (2.5 ± 0.1) × 10⁻⁸ Km by a direct method. The solid-liquid interfacial energy between solid Zn and Zn-Cd liquid solution has been obtained to be (165.5 ± 19.0) mJ/m² from the Gibbs-Thomson equation. The grain boundary energy for the same alloy has been determined as (317.8 ± 39.9) mJ/m². The thermal conductivities of the solid and liquid phases at the eutectic composition and temperature have also been measured.     

Experimental determination of solid-liquid interfacial energy for solid Sn in the Sn-Mg system

The equilibrated grain boundary groove shapes for solid Sn in equilibrium with the Sn-9 at.% Mg eutectic liquid were directly observed annealing a sample at the eutectic temperature for about 5 days with a radial heat flow apparatus. The thermal conductivities of the solid phase, κ_S, and the liquid phase, κ_L, for the groove shapes were measured. From the observed grain boundary groove shapes, the Gibbs-Thomson coefficient, the solid-liquid interfacial energy and grain boundary energy for solid Sn in equilibrium with the Sn-9 at.% Mg eutectic liquid have been determined to be (7.35 ± 0.36) × 10⁻⁸ Km, (136.41 ± 13.64) × 10⁻³ J m⁻² and (230.95 ± 25.40) × 10⁻³ J m⁻², respectively.     

The thermal conductivities of some low melting materials relevant to energy storage

The thermal conductivities of seven candidate materials for solar-energy storage were measured as a function of temperature in the solid and liquid states. A drop in thermal conductivity was observed near the melting point. It was shown that the ratio of thermal conductivities in the liquid and solid phases depended on the structure of the material investigated. The vibrational conductivity contribution was calculated and compared with the experimental values for the thermal conductivities.     

Thermal and electrical conductivities of silver–indium–tin alloys

The variations of thermal conductivity with temperature for the Ag–[x] wt% Sn–20 wt% In alloys (x=8, 15, 35, 55 and 70) were measured using a radial heat flow apparatus. From the graphs of thermal conductivity versus temperature, the thermal conductivities of solid phases at their melting temperature for the Ag–[x] wt% Sn–20 wt% In alloys (x=8, 15, 35, 55 and 70) were found to be 46.9±3.3, 53.8±3.8, 61.2±4.3, 65.1±4.6 and 68.1±4.8 W/Km, respectively. The variations of electrical conductivity of solid phases versus temperature for the same alloys were determined from the Wiedemann–Franz equation using the measured values of thermal conductivity. From the graphs of electrical conductivity versus temperature, the electrical conductivities of the solid phases at their melting temperatures for the Ag–[x] wt% Sn–20 wt% In alloys (x=8, 15, 35, 55 and 70) alloys were obtained to be 0.036, 0.043, 0.045, 0.046 and 0.053 (×10⁸/Ωm), respectively. Dependencies of the thermal and electrical conductivities on the composition of Sn in the Ag–Sn–In alloys were also investigated. According to present experimental results, the thermal and electrical conductivities for the Ag–[x] wt% Sn–20 wt% In alloys linearly decrease with increasing the temperature and increase with increasing the composition of Sn.     

Nanocrystalline formation and optical properties of germanium thin films prepared by physical vapor deposition

Amorphous and nanocrystalline germanium thin films were prepared on glass substrates by physical vapor deposition (PVD). The influence of thermal annealing on the characteristics of the Ge thin films has been investigated. X-ray diffraction (XRD) and SEM show amorphous structure of films deposited at room temperature. After thermal annealing, the crystallinity was improved when the annealing temperature increases. The Ge thin films annealed at different temperatures in air were nanocrystalline, having the face-centered cubic structure with preferred orientation along the 〈1 1 1〉 direction. The nanostructural parameters have been evaluated by using a single-order Voigt profile analysis. Moreover, the analysis of the optical transmission and reflection behavior was carried out. The values of direct and indirect band gap energies for amorphous and nanocrystalline phases are 0.86±0.02, 0.65±0.02 and 0.79±0.02, 0.61±0.02 eV, respectively. In addition, the complex optical functions for the wavelength range 600-2200 nm are reported. The refractive index of the nanocrystalline phase drops from 4.80±0.03 to 2.04±0.02, and amorphous phase changes from 5.18±0.03 to 2.42±0.02 for the whole wavelength range. The dielectric functions ε₁ and ε₂ of the deposited films were recorded as a function of wavelength within the range from 600 to 2200 nm.     

Enhancing the phase stability and ionic conductivity of scandia stabilized zirconia by rare earth co-doping

Effect of co-doping Yb, Gd and Ce in scandia stabilized zirconia (SSZ) on the phase stability, high temperature aging behavior and ionic conductivity was studied. Both binary (10 mol% SSZ) and the ternary (co-doped) compositions were found to be in single cubic phase in the as-processed condition. However, the binary composition exhibited the rhombohedral ‘β’ phase after sintering whereas the ternary compositions remained in the single cubic phase. The sintered pellets were aged at 900 °C for 500 h in air to study the phase stability at high temperature. Transmission electron microscopy revealed that the aged samples of Yb and Gd co-doped compositions contain small amount of the tetragonal phase which resulted in considerable degradation in conductivity (more than 20%). The Ce co-doped sample, on the other hand, was in single cubic phase after aging and this ensured that conductivity reduction was minimal in this composition. The co-doped samples however, showed higher conductivity before and after aging compared to the binary composition. The rhombohedral ‘β’ phase was absent in all the co-doped ternary compositions even after high temperature aging.     

Experimental determination of interfacial energies for Ag2Al solid solution in the CuAl2--Ag2Al system

The equilibrated grain boundary groove shapes of solid solution Ag2Al in equilibrium with an Al-Cu-Ag liquid were observed from a quenched sample with a radial heat flow apparatus.The Gibbs-Thomson coefficient,solid-liquid interfacial energy and grain boundary energy of the solid solution Ag2Al have been determined from the observed grain boundary groove shapes.The thermal conductivity of the solid phase and the thermal conductivity ratio of the liquid phase to solid phase for Ag2Al-28.3 at the %CuAl2 alloy at the melting temperature have also been measured with a radial heat flow apparatus and Bridgman type growth apparatus,separately.     

Nickel ion—A structural probe in BaO-Al2O3-P2O5 glass system by means of dielectric, spectroscopic and magnetic studies

BaO-Al₂O₃-P₂O₅ glasses containing different concentrations of NiO (ranging from 0 to 1.0 mol%) were prepared. A number of studies viz., chemical durability, differential thermal analysis, spectroscopic (infrared, optical absorption spectra), magnetic susceptibility and dielectric properties (constant ε′, loss tan δ, AC conductivity σ_AC over a range of frequency and temperature) of these glasses have been carried out. The studies on chemical durability indicate that there is a significant increase in the corrosion resistance of the glasses; where as the results of differential thermal analysis suggests that there is a substantial improvement in the glass forming ability, with increase in the concentration of NiO up to 0.6 mol% in the glass matrix. The optical absorption, magnetic susceptibility and IR spectral studies point out nickel ions occupy both tetrahedral and octahedral positions in the glass network; the later positions seems to be dominant when the concentration of NiO is beyond 0.6 mol% in the glass matrix. The studies of dielectric properties reveal that the presence of nickel oxide in the glass network causes a considerable improvement in the insulating strength of the se glasses when the concentration of NiO?0.6 mol%.     

Room temperature lithium fast-ion conduction and phase relationship of LiI stabilized LiBH4

In the present work, we focus attention on the effect of LiI addition to newly discovered pure lithium ion conductor, LiBH₄. Solid solution of the composition LiBH₄-LiI (LiI: 6.25-33.3 mol%) was synthesized by solid state reaction. Electrical conductivity was measured from room temperature to 140 °C by ac impedance method, which revealed the fast-ion conduction phase of LiBH₄ can be stabilized to lower temperature, below the room temperature. Solid solution with LiI showed higher conductivities and lower activation energies in comparison with LiBH₄. Powder XRD measurement was carried out at 120 °C (just above the transition temperature of LiBH₄). The lattice constants of the solid solution were determined. DSC measurement showed a systematic compositional dependence on the transition temperature. The stabilization mechanism was discussed.     

Preparation, structure and oxide ion conductivity in Ce6−xYxMoO15−δ (x=0.1-1.4) solid solutions

The Ce_6−xY_xMoO_15−δ solid solution with fluorite-related structure have been characterized by differential thermal analysis/thermogravimetry (DTA/TG), X-ray diffraction (XRD), IR, Raman, scanning electric microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) methods. The electric conductivity of samples is investigated by Ac impedance spectroscopy. An essentially pure oxide-ion conductivity of the oxygen-deficiency was observed in pure argon, oxygen and air. The highest oxygen-ion conductivity was found in Ce_5.5Y_0.5MoO_15−δ ranging from 5.9×10⁻⁵ (S cm⁻¹) at 300 °C to 1.3×10⁻² (S cm⁻¹) at 650 °C, respectively. The oxide-ion conductivities remained stable over 80 h-long test at 800 °C. These properties suggested that significant oxide-ionic conductivity exists in these materials at moderately elevated temperatures.     

Melting curve of silicon to 15 GPa determined by two-dimensional angle-dispersive diffraction using a Kawai-type apparatus with X-ray transparent sintered diamond anvils

The melting curve of silicon has been determined up to 15 GPa using a miniaturized Kawai-type apparatus with second-stage cubic anvils made of X-ray transparent sintered diamond. Our results are in good agreement with the melting curve determined by electrical resistivity measurements [V.V. Brazhkin, A.G. Lyapin, S.V. Popova, R.N. Voloshin, Nonequilibrium phase transitions and amorphization in Si, Si/GaAs, Ge, and Ge/GaSb at the decompression of high-pressure phases, Phys. Rev. B 51 (1995) 7549] up to the phase I (diamond structure)—phase II (β-tin structure)—liquid triple point. The triple point of phase XI (orthorhombic, Imma)—phase V (simple hexagonal)—liquid has been constrained to be at 14.4(4) GPa and 1010(5) K. These results demonstrate that the combination of X-ray transparent anvils and monochromatic diffraction with area detectors offers a reliable technique to detect melting at high pressures in the multianvil press.     

Two-temperature relaxation and melting after absorption of femtosecond laser pulse

The theory and experiments concerned with the electron-ion thermal relaxation and melting of overheated crystal lattice constitute the subject of this paper. The physical model includes two-temperature (2T) equation of state, many-body interatomic potential, the electron-ion energy exchange, electron thermal conductivity, and optical properties of solid, liquid, and two phase solid-liquid mixture. Two-temperature hydrodynamics and molecular dynamics codes are used. An experimental setup with pump-probe technique is used to follow evolution of an irradiated target with a short time step 100 fs between the probe femtosecond laser pulses. Accuracy of measurements of reflection coefficient and phase of reflected probe light are 1% and ∼1 nm, respectively. It is found that, firstly, the electron-electron collisions make a minor contribution to a light absorption in solid Al at moderate intensities; secondly, the phase shift of a reflected probe results from heating of ion subsystem and kinetics of melting of Al crystal during  ps, where t is time delay between the pump and probe pulses measured from the maximum of the pump; thirdly, the optical response of Au to a pump shows a marked contrast to that of Al on account of excitation of d-electrons.     

Molecular alloys as phase change materials (MAPCM) for energy storage and thermal protection at temperatures from 70 to 85 °C

Molecular alloys, that combine a relatively high heat of melting with a suitable melting temperature adapted to the application temperature, are excellent materials for thermal protection and for thermal energy storage. Of special interest is the fact that, by making alloys of molecular materials; the range of melting can be adjusted over a range of temperatures. The present paper reports on the design of MAPCMs to be used for energy storage and thermal protection at temperatures from 70 to 85 °C. The aim is to use these materials for thermal protection in the catering sector in order to avoid proliferation of micro organisms; the minimal temperature required is higher than 65 °C. The work illustrates how some fundamental studies are helpful in choosing the right composition that is able to work at the temperature required for an application. Several molecular alloys using the n-alkanes are elaborated and characterized. The preparation of mixed crystals, their crystallographic and thermodynamic properties and stability, phase change behaviour, and their use in practical applications are reported.     

Evidence for clustering in Mn-doped CeO2

Electron spin resonance spectra of manganese-doped cerium oxide have been studied at room temperature for Ce concentrations between 0.01 and 1.00 mol%. The linewidths and intensities of the lines associated with isolated manganese ions have a maximum between 0.20 and 0.40 mol%. The results suggest that the solid solution of Mn in CeO₂ is not random, but exhibits significant clustering effects.     

Preparation and properties of a gel polymer electrolyte system based on poly-ε-caprolactone containing 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

Gel polymer electrolytes (GPE) obtained by immobilizing a solution of zinc triflate (ZnTr) in an ionic liquid, namely 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [emim][Tf₂N] within a biodegradable polymeric matrix of poly-ε-caprolactone (PCL) were prepared by a simple solvent cast technique for different concentrations of the ionic liquid. The electrolyte with the composition 75 wt% PCL: 25 wt% ZnTr+100 wt% [emim][Tf₂N] showed the highest ionic conductivity of 1.1×10⁻⁴ S cm⁻¹ at 25 °C and favored by the rich amorphous phase of the GPE as confirmed from room temperature X-ray diffraction analysis (XRD). The morphology of the GPE was examined using scanning electron microscopy (SEM) which revealed the homogeneity of the prepared GPE system. The temperature dependence of electrical conductivity of the GPE followed the Arrhenius behavior. The Zn²⁺ ionic transport number has been determined to be ~0.62 which denotes the predominant contribution of zinc ion towards total ionic conductivity. The electrochemical stability window of GPE is found to be 2.5 V with a thermal stability upto 200 °C. This eco-friendly and safe electrolyte may be used to fabricate compostable batteries, in future, with a suitable selection of other components of the battery system.     

In-situ control of different oxygen fugacity experimental study on the electrical conductivity of lherzolite at high temperature and high pressure

At pressure 1.0-4.0 GPa and temperature 1073-1423 K and under the control of oxygen fugacity (Mo+MoO₂, Fe+FeO and Ni+NiO), a YJ-3000t multi-anvil solid high-temperature and high-pressure apparatus and Solartron-1260 impedance/Gain-Phase analyzer were employed to analyze the electrical conductivity of lherzolite. The experimental results showed that: (1) within the range of the selected frequencies (10³-10⁶ Hz), either as viewed from the relationship between the real or imaginary part of complex impedance and the frequency, or from the relationship between modulus, phase angle and frequency, it can be seen clearly that the complex impedance has a strong dependence on frequency; (2) with the rise of temperature (T), the electrical conductivity (σ) increased, and Lg σ and 1/T follows the Arrhenius relationship; (3) with the rise of pressure, the electrical conductivity decreased, and activation enthalpy and temperature-independent pre-exponential factor decreased as well. And the activation energy and activation bulk volume of the main charge carrier in the lherzolite have been obtained for the first time, which are 1.68±0.02 eV and 0.04±0.01 cm³/mol, respectively; (4) under the given pressure and temperature, the electrical conductivity tends to increase with increasing oxygen fugacity, and under the given pressure, the activation enthalpy and pre-exponential factor tend to decrease with the rise of oxygen fugacity; (5) at 2.0 GPa and the control of the three solid buffers, Mo+MoO₂, Fe+FeO and Ni+NiO, the exponential factors of electrical conductivity variation range with oxygen fugacity are , and the theoretical model for the relationship between the electrical conductivity of lherzolite and the oxygen fugacity under high pressure has been established for the first time; (6) the electrical conduction mechanism of small polarons provides a reasonable explanation to the variation of conductivity of lherzolite with oxygen fugacity.     

Metastable phenomena in lutetium nitrate crystal

The ac conductivities along the c-axis of the lutetium nitrate crystal were measured successively in the frequency range from 0.5 to 10⁵ Hz at temperatures from 290 to 210 K. The metastable behaviors of the conductivity were found in the temperature region above 200 K. The fluctuation was given by the successive measurements of the time series of the ac conductivities and represented by non-Gaussian probability distribution function. The effect of the metastable singularity on Raman scattering spectra was observed in the metastable temperature region.     

Features of laser radiation interaction with metals having cryogenic temperature

In this paper we determine the features of the thermophysical processes involved in the interaction of laser radiation with metals that have cryogenic temperature. To do so, we use a one-dimensional model that involves heating a semi-infinite solid by a point thermal source with a constant flux density. Temperature fields, heating and cooling rates in the laser-irradiated zone for iron and titanium at the ambient temperatures of 77 (liquid nitrogen), 293 and 573 K were calculated. The intensity of the laser irradiation enabled the melting temperatures of 1933 K and 1812 K on the Ti and Fe surface, respectively, to be reached. The duration of the laser pulse was 4.5 ms. We show that a drop in ambient temperature from 573 to 77 K leads to a rise in cooling rate from 3.25 × 10³ and 6.4 × 10⁶ K/s to 4.25 × 10³ and 1.3 × 10⁷ K/s in the Ti and Fe targets, respectively. Agreement was good between the calculated depths of melting and phase transformation isotherms and the experimental depths of the interfaces of melting and heat-affected zones.     

Metastable phases in Gallium-Indium eutectic alloy particles and their size dependence

In this paper, submicrometer-sized Ga-In eutectic alloy particles were dispersed into polymethylmethacrylate (PMMA) matrix by ultrasonic vibration and sedimentation method. The solidification and melting processes of Ga-In eutectic alloy particles were studied by differential scanning calorimeter (DSC). Four endothermal peaks with the onset temperature located at 16, −11, −22, and −27 °C were observed in DSC heating curves, which corresponded to the melting process of the stable Ga-In phase α-Ga(In) and three metastable phases of β-Ga(In), δ-Ga(In) and γ-Ga(In), respectively. The stable phase α-Ga(In) can only be formed when the size of alloy particle was larger than 0.58 μm. Conversely, metastable phases β-Ga(In), δ-Ga(In) and γ-Ga(In) are mainly formed. The result shows that phase structures in Ga-In eutectic alloy are size dependent.     

Structural and thermal studies of PVA:NH4I

Proton-conducting polymer electrolytes based on poly vinyl alcohol (PVA; 88% hydrolyzed) and ammonium iodide (NH₄I) has been prepared by solution casting method with different molar ratios of polymer and salt using DMSO as solvent. DMSO has been chosen as a solvent due its high dielectric constant and also its plasticizing nature. The ionic conductivity has been found to increase with increasing salt concentration up to 25 mol% beyond which the conductivity decreases and the highest ambient temperature conductivity has been found to be 2.5×10⁻³ S cm⁻¹. The conductivity enhancement with addition of NH₄I has been well correlated with the increase in amorphous nature of the films confirmed from XRD and differential scanning calorimetry (DSC) analyses. The temperature-dependent conductivity follows the Arrhenius relation. The polymer-proton interactions have been analyzed by FTIR spectroscopy.