Sterically encumbered systems for two low-coordinate phosphorus centers

Tetraarylphenyls of the form 2,3,5,6-Ar4C6 (Ar = p-tert-butylphenyl) are investigated as sterically demanding ligands for the syntheses of compounds having two p-phenylene-bridged phosphorus centers. The precursor to such materials, 1,4-diiodo-2,3,5,6-tetrakis(p-tert-butylphenyl)benzene (1), is readily obtained via a one-pot procedure in 68% yield. Compound 1 is then used to provide the bis(dichlorophosphine) 1,4-bis(dichlorophosphino)-2,3,5,6-tetrakis(p-tert-butylphenyl)benzene (2) and the derived bis(phosphine) 1,4-bis(phosphino)-2,3,5,6-tetrakis(p-tert-butylphenyl)benzene (3) in yields of 56 and 94% respectively. These materials provide access to novel materials containing two low-coordinate phosphorus centers bridged by a sterically encumbered phenylene unit. Compound 2 reacts with benzaldehyde and 2,6-dichlorobenzaldehyde in the presence of excess trimethylphosphine and zinc to produce the new pale yellow crystalline bis(phosphaalkenes) (E,E)-PhC(H)=PAr4C6P=C(H)Ph (4a; 42%) and (E,E)-Ar'C(H)=PAr4C6P=C(H)Ar' (4b; 46%; Ar' = 2,6-dichlorophenyl). The crystal structure of 4a shows a P=C bond length of 1.676(5) A. Compound 2 is also used to provide the unusual red-orange bis(diphosphene) DmpP=PAr4C6P=PDmp (5; 55%; Dmp = 2,6-Mes2C6H3). Compound 5 is structurally characterized, and a P=P bond length of 2.008(2) A is ascertained.     

Triphosphane formation from the terminal zirconium phosphinidene complex [Cp2Zr=PDmp(PMe3)] (Dmp=2,6-Mes2C6H3) and crystal structure of DmpP(PPh2)2

The new terminal phosphinidene complex [Cp₂Zr=PDmp(PMe₃)] (Dmp=2,6-Mes₂C₆H₃; 1) was prepared in 81% yield by the reaction of [Li(Et₂O)][P(H)Dmp] with [Cp₂Zr(Me)Cl] in the presence of excess PMe₃. Compound 1 reacts with Ph₂PCl to produce selectively the sterically congested triphosphane DmpP(PPh₂)₂ (2) and [Cp₂ZrCl₂] in high yields. The structure of 2 obtained by X-ray diffraction analysis of a single crystal reveals phosphorus–phosphorus bond lengths of 2.251(2) and 2.234(2) Å and a PPP bond angle of 105.46(6)°.     

Synthesis and reactions of terminal osmium and ruthenium complexed phosphinidenes [(eta6-Ar)(L)Md=PMes*

Novel, very stable ruthenium and osmium containing terminal phosphinidene complexes [(eta(6)-Ar)(L)M=Mes*] (Ar=benzene, p-cymene; L=PR(3), CO, and RNC) have been prepared by dehydrohalogenation of novel [(eta(6)-Ar)MX(2)(PH(2)Mes*)] complexes in the presence of a stabilizing ligand. Xray crystal structures are reported for [(eta(6)-C(6)H(6))(PPh(3))Rud=PMes*] (9) and [(eta(6)-pCy)(PPh(3))Os=PMes*] (4). Dehydrohalogenation in the absence of a stabilizing ligand resulted in the new P-spiroannulated Ru(2)P(2)-ring structure 16. Dehydrohalogenation in the presence of but-2-yne gave a novel phosphaallyl complex [(eta(6)-Ar)Ru(eta(3)-R(2)PC(Me)CHMe)] 26, for which an X-ray crystal structure is reported. The mechanism by which 16 and 26 are obtained is presumed to involve the intermediate formation of the 16-electron (eta(6)-benzene)Rud=PMes* phosphinidene complex.     

Formation of [Ar*Ge(CH2C(Me)C(Me)CH2)CH2C(Me)=]2 (Ar* = C6H3-2,6-Trip2; Trip = C6H2-2,4,6-i-Pr3) via reaction of Ar*GeGeAr* with 2,3-dimethyl-1,3-butadiene: evidence for the existence of a germanium analogue of an alkyne

The reduction of Ar*GeCl (Ar* = C6H3-2,6-Trip2; Trip = C6H2-2,4,6-i-Pr3) with one equivalent of potassium leads to the formation of a germanium analogue of an alkyne Ar*GeGeAr* 1; reaction of 1 with 2,3-dimethyl-1,3-butadiene yields [Ar*Ge(CH2C(Me)C(Me)CH2)CH2C(Me)=]2 2, which was structurally characterized.     

Zig‐Zag Diphosphene Oligomers Linked by Silver(I) Cation

The coordination of silver cation to diphosphene Mes*P=PMes* ( 1 , Mes* = ^tBu₃C₆H₂) was investigated in detail. The reaction of 1 with Ag[Al(OR_F)₄] (OR_F = OC(CF₃)₃) in the ratios of 2 : 1, 3 : 2 and 1 : 2 led to the formation of the first cationic silver linked diphosphene complexes 2 — 4 . Complexes 2 and 3 contain two and three diphosphene molecules linked by the linear Ag(I) cation, respectively, and they feature unusual zig‐zag topologies. Complex 4 is a dinuclear silver complex, and each Ag(I) center features a tetrahedral geometry, coordinated by one phosphorus atom of diphosphene 1 and three chloro atoms of two CH₂Cl₂ molecules.     

The first structurally authenticated alkali metal 1,3-diphosphaallyl complex [[Bu(t)C(PMes)2]Li(thf)3] (Mes = 2,4,6-Me3C6H2): an alternative synthetic approach to substituted 1,3-diphosphaallyl complexes

Reaction of the phosphavinyl Grignard reagent [Z-MesP=C(Bu(t))MgBr.OEt2]2 (Mes = 2,4,6-Me3C6H2) with MesPCl2 affords the corresponding 1,3-diphosphapropene compound [Z-MesP=C(Bu(t))P(X)Mes] (X = Cl, Br); subsequent reaction with two equivalents of elemental lithium in thf affords the title compound [[Bu(t)C(PMes)2]Li(thf)3], which contains an asymmetric eta1-1,3-diphosphaallyl ligand.     

{(MesGa)3[GaP(H)Mes](PMes)4}, Ein phosphorsubstituiertes Ga?P-Heterocuban

{(MesGa)₃[GaP(H)Mes](PMes)₄}, a Phosphorus-substituted Ga? P-Heterocubane A mixture of MesGaCl₂/GaCl₃ (ratio 3:1) reacts with 5 equivalents of MesPLi₂ in THF at ?78°C to the title compound {(MesGa)₃[GaP(H)Mes](PMes)₄} ( 1 ) by use of the “dilution principle”. 1 can be obtained in 30% yield. Recrystallization of 1 from DME and toluene, respectively, gives 1 · 0.5 DME and 1 · toluene. 1 was characterized by NMR-, IR-, and MS-techniques. According to the X-ray structure determination of 1 · toluene, 1 has a heterocubane structure, one corner of which is substituted with an P(H)Mes group.     

1,3-Digermacyclobutanes with exocyclic C=P and C=P=S double bonds

New 1,3-digermacyclobutanes, with two exocyclic C=PMes* bonds, and the corresponding first bis(methylenethioxo)phosphoranes with C=P(S)Mes* moieties have been synthesized.     

Versatile stereoselective cycloadditions between heterocumulenes and phosphagermaallene Tip(tBu)Ge=C=PMes*: experimental and theoretical investigations

Phosphagermaallene Tip(tBu)Ge=C=PMes* 1 (Tip=2,4,6-triisopropylphenyl, Mes*=2,4,6-tri-tert-butylphenyl) reacts with phenyl isocyanate and tert-butyl isocyanate by a [2+2] cycloaddition that involves the Ge=C and C=O double bonds to afford 1-oxa-2-germacyclobutanes 2 and 3. With N,N'-dicyclohexylcarbodiimide, a [2+2] cycloaddition is observed between the Ge=C and C=N unsaturations to lead to 1-aza-2-germacyclobutane 6 with exocyclic P=C and C=N double bonds. In sharp contrast, 1 reacts with phenyl isothiocyanate, ethyl isothiocyanate, and carbon disulfide according to a [3+2] cycloaddition that involves the whole Ge=C=P unit and the C=S double bond to give transient phosphagermacarbenes (PGeHCs) 11, 12, and 13. These new PGeHCs undergo C-H insertions into one o-tBu group of Mes* (in the case of 11 and 12) or one o-iPr group of Tip (in the case of 13) with formation of tricyclic compounds 8, 9, and 10, respectively. The reaction mechanisms that involve 1 and the phenyl isocyanate and the phenyl isothiocyanate are described and their regioselectivity is explained by theoretical calculations.     

SiP Double Bonds: Experimental and Theoretical Study of an NHC‐Stabilized Phosphasilenylidene

An experimental and theoretical study of the first compound featuring a Si?P bond to a two‐coordinate silicon atom is reported. The NHC‐stabilized phosphasilenylidene (IDipp)Si?PMes* (IDipp=1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene, Mes*=2,4,6‐tBu₃C₆H₂) was prepared by SiMe₃Cl elimination from SiCl₂(IDipp) and LiP(Mes*)SiMe₃ and characterized by X‐ray crystallography, NMR spectroscopy, cyclic voltammetry, and UV/Vis spectroscopy. It has a planar trans‐bent geometry with a short Si? P distance of 2.1188(7) Å and acute bonding angles at Si (96.90(6)°) and P (95.38(6)°). The bonding parameters indicate the presence of a Si?P bond with a lone electron pair of high s‐character at Si and P, in agreement with natural bond orbital (NBO) analysis. Comparative cyclic voltammetric and UV/Vis spectroscopic experiments of this compound, the disilicon(0) compound (IDipp)Si?Si(IDipp), and the diphosphene Mes*P?PMes* reveal, in combination with quantum chemical calculations, the isolobal relationship of the three double‐bond systems.     

Organometallic Niobium and Tantalum Complexes with Primary Phosphine Ligands: Syntheses and Molecular Structures of [Cp*MCl4(PH2R)] (M = Nb,Ta; Cp* = C5Me5;R = But,Ad, Cy,Ph, 2, 4, 6‐Me3C6H2 (Mes))

The reaction of [Cp*MCl₄] (M = Nb, Ta; Cp* = C₅Me₅) with PH₂R in toluene at room temperature gives the primary phosphine complexes [Cp*MCl₄(PH₂R)] [Cp* = C₅Me₅; M = Nb: R = Bu^t ( 1a ), Ad ( 2a ), Cy ( 3a ), Ph ( 4a ), 2, 4, 6‐Me₃C₆H₂ (Mes) ( 5a ); M = Ta: R = Bu^t ( 1b ), Ad ( 2b ), Cy ( 3b ), Ph ( 4b ), Mes ( 5b )] in high yield. 1—5 were characterized spectroscopically (NMR, IR, MS) and by crystal structure determinations. The starting material [Cp*TaCl₄] is monomeric in the solid state, as shown by crystal structure determination.     

Gold(I) Complexation of Phosphanoxy-Substituted Phosphaalkenes for Activation-Free LAuCl Catalysis

The phosphanoxy-substituted phosphaalkene bearing the P=C−O−P skeleton can be prepared from diphosphene Mes*P=PMes* (Mes*=2,4,6-tBu₃C₆H₂), and their use for catalysis is of interest. In this paper, complexation of the phosphanoxy-substituted phosphaalkenes with gold are investigated, and the catalytic activity of the mono- and bis(chlorogold) complexes are subsequently evaluated. Reaction of the P=C−O−P compound with (tht)AuCl (tht=tetrahydrothiophene) showed dominant coordination on the sp³ phosphorus, and complete coordination on the sp² phosphorus required removal of tetrahydrothiophene. Atoms In Molecules (AIM) analysis based on the X-ray structure of the mono(chlorogold) complex indicated a pseudo coordinating interaction between the gold center and the P=C unit. The bis(chlorogold) complexes displayed conformational isomerism, and catalyzed the cycloisomerization/alkoxycyclization of 1,6-enyne and for hydration of terminal alkyne without activation treatment. Even the mono(chlorogold) complexes catalyzed the alkoxycyclization reactions without a silver co-catalyst, indicating that the alcohols were effective in activating the AuCl unit.     

The reactivity of phosphagermaallene Tip(t-Bu)Ge=C=PMes* with doubly and triply bonded nitrogen compounds

Phosphagermaallene Tip(t-Bu)Ge=C=PMes* (1; Mes* = 2,4,6-tri-tert-butylphenyl, Tip = 2,4,6-triisopropylphenyl) gives, with N-benzylidenemethylamine and pivalonitrile, [2+2] cycloadditions between the Ge=C double bond and the C=N and C≡N unsaturations, leading to the formation of the corresponding four-membered heterocycles 2 and 9. With N-tert-butyl-α-phenylnitrone and benzonitrile oxide, [2+3] cycloadditions occur to form the five-membered ring derivatives 6 and 7. By treatment of 1 with derivatives which possess weak acidic hydrogens in α of the C=N or C≡N multiple bond, two types of reactions were observed: an ene reaction with methyl(benzylideneamino)acetate and a 1,2 addition with acetonitrile to afford azadienyl(germyl)ether (4) and 3-germa-1-phosphapropene (8), respectively. In the case of benzonitrile, phosphagermaallene 1 behaves as a 1,3-dipole, to give, via a cyclic phosphagermacarbene intermediate, the tricyclic derivative 10.     

Neue Kupferkomplexe mit Phosphaalkenliganden. Molekülstruktur von [Cu{P(Mes*)C(NMe2)2}2]BF4 (Mes* = 2,4,6‐tBu3C6H2)

New Copper Complexes Containing Phosphaalkene Ligands. Molecular Structure of [Cu{P(Mes*)C(NMe₂)₂}₂]BF₄ (Mes* = 2,4,6‐tBu₃C₆H₂) Reaction of equimolar amounts of the inversely polarized phosphaalkene tBuP=C(NMe₂)₂ ( 1a ) and copper(I) bromide or copper(I) iodide, respectively, affords complexes [Cu₃X₃{μ‐P(tBu)C(NMe₂)₂}₃] ( 2 ) (X =Br) and ( 3 ) (X = I) as the formal result of the cyclotrimerization of a 1:1‐adduct. Treatment of 1a with [Cu(L)Cl] (L = PiPr₃; SbiPr₃) leads to the formation of compounds [CuCl(L){P(tBu)C(NMe₂)₂}] ( 4a ) (L = PiPr₃) and ( 4b ) (L = SbiPr₃), respectively. Reaction of [(MeCN)₄Cu]BF₄ with two equivalents of PhP=C(NMe₂)₂ ( 1b ) yields complex [Cu{P(Ph)C(NMe₂)₂}₂]BF₄ ( 5b ). Similarly, compounds [Cu{P(Aryl)C(NMe₂)₂}₂]BF₄ ( 5c (Aryl = Mes and 5d (Aryl = Mes*)) are obtained from ArylP=C(NMe₂)₂ ( 1c : Aryl = Mes; 1d : Mes*) and [(MeCN)₄Cu]BF₄ in the presence of SbiPr₃. Complexes 2 , 3 , 4a , 4b , and 5b‐5d are characterized by means of elemental analyses and spectroscopy (¹H‐, ¹³C{¹H}‐, ³¹P{¹H}‐NMR). The molecular structure of 5d is determined by X‐ray diffraction analysis.     

Bis(phosphanylamino)benzene ligands: a zinc(II) complex and an unusual nickel(I) complex with a Dewar-benzene-type Ni2P2N2 backbone

ZnPr(2) reacts with 1,2-(NHPPh(2))(2)C(6)H(4) (1) to give the bis-amido complex [Zn(THF){1-N(PPh(2))-2-N(mu-PPh(2))C(6)H(4)-kappa(3)N,N',P}](2) (3), while monolithiated 1 (prepared in situ from 1 and LiBu(n)) reacts with NiCl(2) with formation of the unusual nickel(I) complex [Ni{1-NH(PPh(2))-2-N(micro-PPh(2))C(6)H(4)-kappa(2)N,P}](2) (4), which has a Ni-Ni bond. Complexes 3 and 4 were structurally characterised. Furthermore, the structure of the sterically demanding bis-aminophosphine 1,2-(NHPMes(2))(2)C(6)H(4) (2, Mes = 2,4,6-Me(3)C(6)H(2)) is compared with that of the corresponding phenyl-substituted derivative 1,2-(NHPPh(2))(2)C(6)H(4) (1). B3LYP/LANL2DZ molecular orbital calculations on 4 indicate that a two-electron reduction should convert the Dewar-benzene-like six-membered Ni(2)N(2)P(2) ring 4 in to a benzene-like structure, a structure which is observed for the isoelectronic Zn(II) complex 3.     

Chalcogeno[bis(phosphaalkenyl)] germanium and tin compounds

The first diphosphaalkenylstannylene stabilized through complexation with a carbene NHC-Sn[C(Cl)═PMes*](2)1 (Mes* = 2,4,6-tri-tert-butylphenyl; NHC = :C{N(iPr)C(Me)}(2)) was isolated and fully characterized including single crystal X-ray diffraction analysis. Its reaction with elemental sulfur rapidly gives the cyclic Sn(2)S(2) (dithiadistannetanne) derivative 3, presumably formed by dimerization of a stannathione intermediate. By contrast, its germanium analogue NHC-Ge[C(Cl)═PMes*](2)7 leads to the corresponding monomeric germathione 4 and germaselenone 5. The germaselenone was more stable than the germathione and could be structurally characterized. An unusual thermal cyclization reaction of the last one occurs with an excess of selenium to give the Ge(2)Se(3) (triselenadigermolane) ring derivative 6.     

Substituted N-picolylethylenediamines of the type (ArNHCH2CH2){(2-C5H4N)CH2}NR [R = Me, 4-CH2=CH(C6H4)CH2, (2-C5H4N)CH2] and their transition metal(II) halide complexes

Alkylation of (ArNHCH2CH2){(2-C5H4N)CH2}NH with RX [RX = MeI, 4-CH2=CH(C6H4)CH2Cl) and (2-C5H5N)CH2Cl] in the presence of base has allowed access to the sterically demanding multidentate nitrogen donor ligands, {(2,4,6-Me3C6H2)NHCH2CH2}{(2-C5H4N)CH2}NMe (L1), {(2,6-Me3C6H3)NHCH2CH2}{(2-C5H4N)CH2}NCH2(C6H4)-4-CH=CH2 (L2) and (ArNHCH2CH2){(2-C5H4N)CH2}2N (Ar = 2,4-Me2C6H3 L3a, 2,6-Me2C6H3 L3b) in moderate yield. L3 can also be prepared in higher yield by the reaction of (NH2CH2CH2){(2-C5H4N)CH2}2N with the corresponding aryl bromide in the presence of base and a palladium(0) catalyst. Treatment of L1 or L2 with MCl2 [MCl2 = CoCl2.6H2O or FeCl2(THF)1.5] in THF affords the high spin complexes [(L1)MCl2](M = Co 1a, Fe 1b) and [(L2)MCl2](M = Co 2a, Fe 2b) in good yield, respectively; the molecular structure of reveals a five-coordinate metal centre with bound in a facial fashion. The six-coordinate complexes, [(L3a)MCl2](M = Co 3a, Fe 3b, Mn 3c) are accessible on treatment of tripodal L3a with MCl2. In contrast, the reaction with the more sterically encumbered leads to the pseudo-five-coordinate species [(L3b)MCl2](M = Co 4a, Fe 4b) and, in the case of manganese, dimeric [(L3b)MnCl(mu-Cl)]2 (4c); in 4a and 4b the aryl-substituted amine arm forms a partial interaction with the metal centre while in 4c the arm is pendant. The single crystal X-ray structures of , 1a, 3b.MeCN, 3c.MeCN, 4b.MeCN and 4c are described as are the solution state properties of 3b and 4b.     

Syntheses and Crystal Structures of Two Cyano-bridged Bimetallic Complexes [Ce(DMSO)4(H2O)3Fe(CN)6]·H2O and [La(DMSO)4(H2O)3Co(CN)6]·H2O (DMSO = Dimethylsulfoxide)

Two new bimetallic cyano-bridged complexes [Ce(DMSO)4(H2O)3Fe(CN)6]·H2O 1 and [La(DMSO)4(H2O)3Co(CN)6]·H2O 2 have been prepared by the ball milling reaction method and structurally characterized by X-ray single-crystal structure analyses. Crystallographic data for 1:C14H32CeFeN6O8S4, Mr = 736.67, monoclinic, space group P21/n, a = 14.952(1), b =13.7276(9), c = 15.392(1) (A), β = 108.288(1)°, V = 2999.6(4) (A)3, Z = 4, Dc= 1.631 g/cm3,μ =2.304 mm-1, F(000) = 1480, R = 0.0593 and wR = 0.1611; and those for 2: C14H32CoLaN6O8S4,Mr=738.54, monoclinic, space group P21/n, a = 14.945(3), b = 13.731(3), c = 15.300(3) (A), β=107.806(1)°, V= 2989.3(11) (A)3, Z = 4, Dc = 1.641 g/cm3,μ = 2.288 mm-1, F(000) = 1480, R =0.0383 and wR = 0.1132. In both complexes the lanthanide ion is eight-coordinated in a square antiprism arrangement, and the Fe(Ⅲ) or Co(Ⅲ) ion in a nearly regular octahedral environment.The [LnM(CN)6(DMSO)4(H2O)3]·H2O (Ln = Ce and M = Fe for 1; Ln = La and M = Co for 2)species are held together via hydrogen bonds by coordinated water molecules, lattice water molecules and nitrogen atoms of cyanide groups to form a three-dimensional framework.     

Organically templated uranium(IV) fluorooxalates with layer structures: (H4TREN)[U2F6(C2O4)3].4H2O (TREN = tris(2-aminoethyl)amine) and (H4APPIP)[U2F6(C2O4)3].4H2O (APPIP = 1,4-bis(3-amino-propyl)piperazine)

Two organically-templated layered uranium(IV) fluorooxalates, (H(4)TREN)[U(2)F(6)(C(2)O(4))(3)].4H(2)O (1) (TREN = tris(2-aminoethyl)amine) and (H(4)APPIP)[U(2)F(6)(C(2)O(4))(3)].4H(2)O (2) (APPIP = 1,4-bis(3-aminopropyl)piperazine), have been synthesized by hydrothermal methods and structurally characterized by single-crystal X-ray diffraction, thermogravimetric analysis, and magnetic susceptibility. Both structures consist of anionic [U(2)F(6)(C(2)O(4))(3)](4-) layers separated by organic ammonium cations and lattice water molecules. The UF(3)O(6) polyhedra are connected by oxalate ligands in different ways within the layers. They are the first examples of organically-templated uranium fluorooxalates. Crystal data for compound 1 follow: monoclinic, P2(1)/c (No. 14), a = 19.1563(5) A, b = 8.9531(2) A, c = 16.6221(4) A, beta = 114.633(1) degrees, and Z = 4. Crystal data for compound are the same as those for 1 except a = 10.3309(8) A, b = 15.564(1) A, c = 17.537(1) A, and beta = 95.430(4) degrees.     

Characterization of the sterically encumbered terphenyl-substituted species 2,6-Trip2H3C6Sn-Sn(Me)2C6H3-2,6-Trip2, an unsymmetric, group 14 element, methylmethylene, valence isomer of an alkene, its related lithium derivative 2,6-Trip2H3C6(Me)2Sn-Sn(Li)(Me)C6H3-2,6-Trip2, and the monomer Sn(t-Bu)C6H3-2,6-Trip2 (Trip = C6H2-2,4,6-i-Pr3)

The reaction of the recently reported sterically encumbered terphenyl tin(II) halide species Sn(Cl)C6H3-2,6-Trip2 (Trip = C6H2-2,4,6-i-Pr3), 1, with 1 equiv of MeLi or MeMgBr afforded 2,6-Trip2H3C6Sn-Sn(Me)2C6H3-2,6-Trip2, 2, which is the first stable group 14 element methylmethylene (i.e., CH3CH) analogue of ethylene (H2CCH2). Reaction of 1 with 1.5 equiv of MeLi yielded the stannylstannate species 2,6-Trip2H3C6(Me)2Sn-Sn(Li)(Me)-C6H3-2,6-Trip2, 3, whereas reaction of 1 with 1 equiv of t-BuLi gave the heteroleptic stannanediyl monomer Sn(t-Bu)C6H3-2,6-Trip2 (4). The compounds 2-4 were characterized by 1H, 13C (7Li, 3 only), and 119Sn NMR spectroscopy in solution and by UV-vis spectroscopy. The X-ray crystal structures of 2-4 were also determined. The formation of the stannylstannanediyl 2 instead of the expected symmetrical, valence isomer "distannene" form (Sn(Me)C6H3-2,6-Trip2)2, 6, is explained through the ready formation of LiSn(Me)2C6H3-2,6-Trip2, 5, which reacts rapidly with 1 to produce 2 which can then react with a further equivalent of MeLi to give 3. The stability of singly bonded 2 in relation to the formally doubly bonded 6 was rationalized on the basis of the difference in the strength of their tin-tin bonds. In contrast to the methyl derivatives, the reaction of 1 with t-BuLi proceeded smoothly to give the monomeric compound 4. Apparently, the formation of a t-Bu analogue of 5 was prevented by the more crowding t-Bu group. Compound 2 is also the first example of a stable molecule with bonding between a two-coordinate, bivalent tin and four-coordinate tetravalent tin. Both compounds 2 and 3 display large J 119Sn-119Sn couplings between their tin nuclei and the tin-tin bond lengths in 2 (2.8909(2) A) and 3 (2.8508(4) A) are relatively normal despite the presence of the sterically crowding terphenyl substituents.