Gap levels of Ti<Superscript>3+</Superscript> on Nb or Li sites in LiNbO<Subscript>3</Subscript>:(Mg):Ti crystals and their effect on charge transfer processes

The Ti dopant occupying Li or Nb sites and the charge transfer processes induced by thermochemical reduction and optical bleaching treatments have been investigated in LiNbO₃ systems using optical absorption and EPR. The Ti³⁺ centers, built preferentially at Nb sites in heavily Mg-codoped crystals, are shown to have absorption bands at 1.62±0.08 eV and 2.65±0.25 eV, which are similar or slightly redshifted compared to Ti³⁺ centers at Li sites in LiNbO₃:Ti crystals. The Ti_Nb^4+/3+ gap level plays an important role in the trapping of electron-polarons in LiNbO₃, double-doped with Mg and Ti; in particular, an enhanced optical detrapping sensitivity for pumping in the 1.3–2.8 eV range is observed, which may be relevant for applications in integrated optics. Evidence indicating the possible existence of bipolarons involving the Ti dopant is presented. PACS 77.84.Dy; 71.55.Ht; 71.38.-Mx; 78.40.Ha; 76.30.Fc     

A study on the influence of ytterbium and impurities on lattice parameters and the phase transition temperature of Czochralski-grown LiNbO3

LiNbO₃ crystals were grown from a congruent melt by the Czochralski method. Special care was taken with respect to purity and an analysis of impurity levels. Present crystals are as pure as 3N-4N. In particular, doping by Yb³⁺ was investigated. An upper limit for the inclusion of Yb³⁺ in LiNbO₃ may be set at 2.5 mol% for a congruent melt. Present results demonstrate the complex interaction between intrinsic and extrinsic defects in LiNbO₃. The variation of lattice parameters supports evidence for the Li⁺ vacancy model and an occupation of Li sites for Yb³⁺. Data on purities, laser properties and analytical methods provide a short review on a field, where analytical results gained by different techniques often may disagree.     

The use of photoinduced light scattering for the evaluation of photoelectric fields in Lithium Niobate Crystals

The photovoltaic and diffusion fields in nominally pure single crystals of stoichiometric composition (R = Li/Nb = 1) grown from the melt with 58.6 mol % of Li₂O (LiNbO₃ stoich), in the nominally pure single crystals of congruent composition (LiNbO₃), and in congruent single crystals doped with Cu²⁺, Zn²⁺, and Gd³⁺ are found from the parameters of the photoinduced light scattering indicatrix obtained with the use of a 60-mW He-Ne laser.     

OH-吸收带作为铌酸锂晶体缺陷结构的探针

本文报道了一组不同Li/Nb比和另一组不同掺Mg浓度的LiNbO₃晶体室温OH^-吸收带的实验结果,观察到OH^-吸收带的三峰结构及其随Li/Nb比的变化,以及重掺Mg晶体中(6mol％MgO)OH^-吸收带转变为双峰结构,并向高能端移动54cm^-1。根据LiNbO₃的晶体结构以及Abrahams和Smyth的缺陷结构模型,对化学计量晶体、一致熔化晶体和掺Mg晶体分别进行讨论。并提出重掺Mg晶体中OH^-吸收带向高能端的移动可能是由于当掺Mg浓度超过阈值后Mg²⁺离子开始进入Nb位而引起的。 关键词：     

锂铌比对铪铁铌酸锂晶体全息存储性能的影响

以掺杂4 mol%Hf⁴⁺的LiNbO₃:Fe:Hf系列晶体（[Li]/[Nb]比变化）为研究对象,研究了系列晶体的可见吸收光谱,在632.8nm的写入光下晶体的衍射效率、灵敏度和抗光散射能力在不同[Li]/[Nb]下的变化规律.研究发现Hf⁴⁺的浓度达到阈值浓度后,随着[Li]/[Nb]比的增大,晶体的可见吸收边会发生红移,而且晶格中[Fe²⁺]/[Fe³⁺]也会增加,这就导致随着[Li]/[Nb]比的增加,样品的衍射效率逐渐减小,写入时间缩短,灵敏度增大.同时,在晶体中,随着[Li]/[Nb]的增大,陷阱中心Fe²⁺Li数量增大会使得晶体抗光散射能力减弱.     

Photoelectric fields in lithium niobate crystals

Photovoltaic and diffusion fields in nominally pure single crystals of stoichiometric composition (R = Li/Nb = 1) grown in the presence of 6 wt% K₂O flux (LiNbO₃ stoich. K₂O) in nominally pure single crystals of complementary composition (LiNbO₃), complementary single crystals doped with Zn²⁺, Er³⁺ at wavelength of 476, 514.5, 530 nm are defined according to parameters of photo induced light scattering indicatrix. Photo induced changes of crystals’ refractive index are defined.     

Studies of absorption spectra and the photovoltaic effect in LiNbO3:Mg:Fe crystals

The absorption spectra, photoconductivities and photovoltaic currents of LiNbO₃:Fe crystals with different Mg doping levels and Li/Nb ratios in the oxidized state have been investigated at room temperature. The Fe²⁺ ions in LiNbO₃:Mg:Fe with Mg content above a critical value are more easily oxidized than in crystals with Mg content below a critical value. The photoconductivity of LiNbO₃:Mg:Fe crystals with Mg content above a critical value is one order of magnitude higher than those with Mg content below a critical value, however, the photovoltaic current of the former is one order of magnitude lower than the latter. The differences are postulated to be due to different sites of Fe in these two classes of crystals.     

Photorefractive properties for holographic application of Ce:Fe:LiNbO3 crystals with various [Li]/[Nb] ratios

Ce:Fe:LiNbO₃ crystals with various [Li]/[Nb] ratios were grown by the Czochralski method from melts having compositions varying between 48.6 and 58 mol% Li₂O. The Ce, Li and Nb concentrations in the grown Ce:Fe:LiNbO₃ crystals were analyzed by the inductively coupled plasma atomic emission spectrometer (ICP-AES). It was found that as the [Li]/[Nb] ratio increases in the melt, the [Li]/[Nb] ratio in the crystal and the distribution coefficients of Ce ions increase also. The photorefractive properties of the Ce:Fe:LiNbO₃ crystals were experimentally studied by the two-wave coupling method. The results show that as the [Li]/[Nb] ratio increases, the dynamic range decreases, but the photorefractive sensitivity and the signal-to-noise ratio improve. In a coherent volume 0.192 cm³ of a Ce:Fe:LiNbO₃ crystal with [Li]/[Nb] ratio of 1.2, 3800 holograms with 800×600 pixels have been successfully multiplexed in a compact volume holographic data storage system.     

OH-absorption properties of the optical damage region in codoped In/Mg:LiNbO3 crystals with various Li/Nb ratios

OH-absorption properties of the optical damage region in a series of codoped In/Mg:LiNbO₃ crystals with various Li/Nb ratios have been investigated. The OH⁻-associated vibrational peak at 3507 cm⁻¹ is confirmed to occur in crystals with Li/Nb ratio of 0.94. For codoped In/Mg:LiNbO₃ crystals with Li/Nb ratio of 1.05 and 1.20, the OH⁻-associated vibrational peaks are detected at 3536 and 3507 cm⁻¹ as well. A new peak at 3518 cm⁻¹ attributed to a (In_Nb)²⁻-OH⁻-(Mg_Nb)³⁻ defect center is revealed in crystals with Li/Nb ratio 1.38. When the “In-Mg threshold” concentration is reached, the optical damage resistance ability of codoped In/Mg:LiNbO₃ crystals is greatly improved.     

Quadrupole interaction of8Li and9Li in LiNbO3 and the quadrupole moment of9Li

The quadrupole interaction of nuclear spin polarized⁸Li (I=2) and⁹Li (I=3/2) in LiNbO₃ has been studied at room temperature. The polarization was achieved by optical pumping of a fast atomic beam with circularly polarized laser light. The atoms were implanted into a hexagonal LiNbO₃ single crystal and the quadrupole splitting ofβ-NMR spectra was measured. A ratio of ¦Q(⁹Li)/Q(⁸Li)¦=0.88(4) for the nuclear quadrupole moments was deduced, yielding a new value of ¦Q(⁹Li)¦=25.3 (9) mb for the quadrupole moment of⁹Li.     

Luminescence kinetics of LiNbO3:Yb3+-Er3+, LiNbO3:Er3+, and LiNbO3:Yb3+ crystals under selective excitations in the impurity subsystem

The results of investigations of luminescent radiations’ kinetic characteristics for LiNbO₃:Yb³⁺-Er³⁺, LiNbO₃:Er³⁺, and LiNbO₃:Yb³⁺ crystals under optical excitations at 532 nm and 1064 nm wavelengths are presented. The shapes and times of rise and damping of luminescent signals at 550 nm, 980 nm and 1555 nm wavelengths under selective excitations in the impurity subsystem of the investigated materials are determined. Comparison of the temporal characteristics of luminescent responses of LiNbO₃ crystals doped separately with Yb³⁺ and Er³⁺ ions with those of the LiNbO₃:Yb³⁺-Er³⁺ crystal allows identifying the contributions from different energy transfer processes of optical excitation taking place in the impurity subsystem of the material.     

Photorefractive light scattering in lithium niobate crystals doped with Mg2+, B3+, Y3+, and Ta5+

We have investigated the photorefractive (photoinduced) light scattering in lithium niobate single crystals: LiNbO₃, LiNbO₃:B, LiNbO₃:Y(0.46 mas %), LiNbO₃:Y(0.24):Mg(0.63 mas %), and LiNbO₃:Ta(1.13):Mg(0.0109 mas %) that were grown from congruent melts. We have found that the shape of the speckle structure of this scattering and the kinetics of the development of its indicatrix depend substantially on the type of the impurity dopant in the lithium niobate crystal. We have observed that, upon laser irradiation of crystals doped with Y³⁺, Ta⁵⁺:Mg²⁺, and Y³⁺:Mg²⁺, the shape of their scattering indicatrix changes with time. At the same time, the LiNbO₃:B crystal is characterized by a complete absence of time changes in its speckle structure, which indicates that the photorefractive effect in this crystal is substantially lowered.     

Ferroelectric domain inversion in near-stoichiometric lithium niobate for high efficiency blue light generation

LiNbO₃ single crystals with a composition close to stoichiometry ([Li]/[Li+Nb]=0.496), 16 mm in diameter and 40 mm in length were grown by the Czochralski method using K₂O flux. The domain reversal characteristics of near-stoichiometric LiNbO₃ single crystals were investigated. The switching field required for 180° ferroelectric domain reversal in the near-stoichiometric crystal at room temperature was 7.5 KV/mm. This is about one third of the switching field required for conventional LiNbO₃ crystals. Domain reversal (180°) in near-stoichiometric LiNbO₃ samples of 1.0 mm thickness has been achieved. Samples have been evaluated by second harmonic generation and conversion efficiencies of up to 32% have been obtained. Received: 8 November 2000 / Accepted: 29 January 2001 / Published online: 20 June 2001     

Ionic diffusion and structural changes in lithium compounds

⁷Li NMR measurements have been performed to study milling effects on ionic diffusion in lithium cobalt oxide, LiCoO₂ and piezoelectric compound, LiNbO₃ prepared by mechanical milling method. The milling process gives quite different effects on NMR spectra of these compounds. Both ⁷Li MAS and static NMR spectra of the milled LiCoO₂ show the line broadening with increasing milling time. ⁵⁹Co static spectra also show specific changes in the line shape with increasing milling time. These results would be attributed to the change in an electronic state of Co 3d orbitals because of charge compensation associated with oxygen vacancies and/or defects. ⁷Li static NMR spectrum of milled LiNbO₃ shows complicated line shape with increasing milling time. It is explained by superposition of two spectra arising from mobile Li⁺ ions and non-mobile ones settled on the fixed site. It is shown that the ratio of mobile Li⁺ ions increases up to a maximum of 9.4% with increasing milling time. Milling effects on the Li⁺ ionic diffusion in LiCoO₂ and LiNbO₃ are discussed in connection with changes in local structure.     

Effect of external electric field on R line absorption spectra in LiNbO3:Cr3+ crystals

The effect of an external electric field on the R absorption lines of LiNbO₃:Cr³⁺ crystals has been studied by a high-sensitivity differential technique at 77 K. Linear Stark effect has been observed in a field directed along the trigonal crystal axis. No effect of the field was observed when directed perpendicular to this axis. These characteristics of the Stark effect provide a convincing argument for the electric dipole moments of Cr³⁺ centers being oriented along the trigonal C ₃ axis of the crystal and indicate that the chromium centers in LiNbO₃ have C ₃ symmetry. Fiz. Tverd. Tela (St. Petersburg) 39, 2053–2056 (November 1997)     

Lattice site of Er in LiNbO3:Mg,Er crystals

Abstract

The lattice site of Er has been determined in LiNbO₃:Mg, Er crystals by the Rutherford backscattering channeling technique. It has been shown unambiguously that Er occupies Li site in the crystal lattice. OH absorption band has not been found in the 3500–3525 cm^?1 region. The RBS result confirms the assumption that OH^? ions may form defect complexes only with those trivalent impurities which replace niobium.     

Photorefractive centers in LiNbO3, studied by optical-, Mössbauer- and EPR-methods

The photorefractive properties of LiNbO₃∶Fe and LiNbO₃∶Cu have been studied in combination with optical absorption-, Mössbauer- and EPR-measurements. The charge states of Fe in successively reduced LiNbO₃∶Fe have been investigated with respect to the influence on the photorefractive sensitivity and saturation value of the refractive index change. The results of this experiment demonstrate clearly the close correlation between the concentration of Fe²⁺ impurities and the optical absorption band around 2.6 eV in LiNbO₃∶Fe, which is known to give rise to an anisotropic charge transport upon optical excitation. The resulting photocurrents determine the photorefractive sensitivity mainly in the initial state of halographic exposure. With increasing conversion from Fe³⁺ to Fe²⁺ the photorefractive sensitivity saturates and the saturation value of the refractive index change decreases remarkably. In the case of LiNbO₃∶Cu a similar behaviour of the photorefractive storage parameters after successive reduction treatments has been observed qualitatively. However, in contradiction to LiNbO₃∶Fe the Cu²⁺ centers cannot be related to the photorefractive sensitivity of LiNbO₃∶Cu. These results are discussed with respect to the predictions of two models concerning the microscopic nature of the photorefractive process in doped LiNbO₃.     

Dopant occupancy and optical properties of Er3+ in Er/Zn-codoped lithium niobate crystal

The effect of Zn²⁺ ion on the dopant occupancy and optical characteristic of Er³⁺ ion in Er/Zn-codoped LiNbO₃ crystal is reported. The intense 1.54 μm and relatively weak green upconversion emissions are observed for Er (1 mol%)/Zn (6 mol%):LiNbO₃ crystal. The OH^? absorption and the time-resolved spectra show that the Zn²⁺ codoping decreases the threshold concentration of Er³⁺ ion in Er/Zn-codoped LiNbO₃ crystal. The experimental results here imply that the potential application of Er³⁺-doped LiNbO₃ crystal can be designed and optimized on the basis of the theoretical investigations.     

Structural homogeneity of photorefractive LiNbO<Subscript>3</Subscript> crystals doped with 0.03–4.5 mol % of ZnO

Using the electronic spectroscopy method, the laser-conoscopy method, and the Raman light-scattering method, we have studied the structural homogeneity of LiNbO₃ crystals doped with 0.03–4.5 mol % of ZnO. We have found that, as the laser radiation power is increased to 90 mW, the conoscopic patterns of crystals show additional distortions, which are attributed to the manifestation of the photorefractive effect. For the LiNbO₃ crystal doped with 4.5 mol % of ZnO, in which the photorefractive effect is low, we have revealed a considerable shift (compared to the remaining crystals) of the optical absorption edge toward the shortwavelength range, which indicates a high structural homogeneity of this crystal. We have shown that, in the LiNbO₃ crystal doped by 0.05 mol % ZnO, due to the displacement of Nb_Li and Li□ structural defects by Zn²⁺ cations, the crystal structure is ordered and, simultaneously, the number of defects with localized electrons decreases.     

The study of damage and optical properties in LiNbO3 implanted by MeV Er and He ions

Abstract

Two LiNbO₃ (X and Y cut) crystals from different companies were implanted by 3.0 MeV Er ions to a dose of 7.5 × 10¹⁴ ions/cm² and 3.5 × 10¹⁴ ions/cm² with different beam current densities, respectively. After annealing at 1060°C in air for 2 hours, one LiNbO₃ sample was implanted by 1.5 MeV He ions to a dose of 1.5 × 10¹⁶ ions/cm². The Rutherford backscattering/channeling and prism coupling method have been used to study the damage and optical properties in implanted LiNbO₃. The results show: (1) the damage in LiNbO₃ created by 3.0 MeV Er ions depends strongly on the beam current density; (2) after annealing at 1060°C in air for 2 hours, a good Er doped LiNbO₃ crystal was obtained; (3) there is waveguide formation possible in this Er-doped annealed LiNbO₃ after 1.5 MeV He ion implantation. It is suggested that annealing is needed to remove the damage created by MeV Er ions before the MeV He ion implantation takes place, to realize the waveguide laser for Er doped LiNbO₃.