共查询到20条相似文献,搜索用时 31 毫秒
1.
Preparation and Properties of Ti-substituted N-Heterocycles The compounds (x = 2 to 6) have been prepared by transamination of Ti(NMe2)4 with the heterocyclic amines and have been characterised by elemental analyses and 1H NMR and IR spectroscopy. The dependence on both x and n of the thermal decomposition has been studied for the series and . The results can be interpreted in terms of the steric strain of the R2N and substituents. Apart from the piperidido groups none of the ligands exhibit protective group properties comparable to the R2N groups. 相似文献
2.
Charles E. Carraher Larry Torre 《Journal of polymer science. Part A, Polymer chemistry》1971,9(4):975-981
Crosslinked products of the form: and have been formed from the interfacial condensation of phosphorus diacid halides with poly(vinyl alcohol). Product yield and amounts of phosphorus reactant included in the product increases as the amount of base increases. Product stability in aqueous systems decreases in the order neutral > base > acid. 相似文献
3.
Helmut Schwarz Recai Sezi Karsten Levsen Heinz Heimbach Friedrich Borchers 《Journal of mass spectrometry : JMS》1977,12(9):569-572
Collisional activation demonstrates that the stable ions from o-nitrobenzaldehydedimethylacetale possess the structure of ionized o-nitroso benzoic acid methyl ester. Contrary to previous conclusions it is demonstrated that the structure of the stable ions (m/e 135) from different precursors [i.e. o-nitrobenzyl alcohol o-nitrobenzyl cyanide and o-nitrobenzaldoxime is best represented by 2,1-benzisoxazoline-3-one. Ionized o-nitrosobenzaldehtde rearranged to 2,1-benzisoxazoline-3-one prior to collision induced decomposition, whereas 2-benzoxazolinone and 3-hydroxy-1,2-benzisoxazole do not rearrange within 10?5 s. 相似文献
4.
The reactions of fluorosulfonylurea derivatives with phosphorus pentachloride in carbon tetrachloride leads to and . These compounds are easily fluroinated by arsenic trifluoride to the corresponding fluorosulfonyl derivatives. It was shown that PCl5 is reliable for the fluorine-chlorine exchange. Isocyanate esterchlorides as well as carbonyl-fluoride derivatives react with compounds which have an active hydrogen atom. By this way were prepared: . By hydrolysis of , is probably formed as the first reaction product. The acid could be trapped with tetraphenylphosphoniumchloride as a well-cristalline salt. Fluorosulfonyl isocyanate reacts with aldehydes to the following compounds: FSO2N ? CHCH3, FSO2N ? CHC2H5, FSO2N ? CH? CH(CH3)2 and FSO2N ? CHC6H5. The physical and chemical properties as well as IR and NMR spectra of the compounds are described and, in part, compared and discussed. 相似文献
5.
R. M. Srivastava Katherine Weissman Leallyn B. Clapp 《Journal of heterocyclic chemistry》1967,4(1):114-117
The formation of oxazolidines from propionaldehyde and aliphatic β-aminoalcohols is complicated by the appearance of appreciable amounts of unsaturated Schiff bases. The simple Schiff base, often the dominant species when aromatic aldehydes react with amines, could not be detected in the present aliphatic systems. We conclude that in aliphatic systems the order of stability is and . The gem-dimethyl group α to nitrogen stablizes the heterocyclic ring remarkably. 相似文献
6.
Specific losses of water are observed from the molecular anions of monoximes of α-diketones. Labelling studies, kinetic energy release values and the +E spectra of ions have been used to aid in the elucidation of the fragmentation pathways. It is proposed that the majority of ions have α-keto nitrile structures. 相似文献
7.
Trihalogermyl-furans and -thiophenes were prepared by inserting germanium dibromide (GeBr2) generated from the dibromogermane(II) dioxanate complex into the carbon-halogen bond of halo-furans and -thiophenes. Their ethanolysis and transesterification by triethanolamine yielded the germatranes which were subjected to psychotropic activity assays. The psychotropic properties of germatranes were found to depend on the type of the heterocycle and on the position of the germatrane moiety. 相似文献
8.
Giuseppe Werber Francesco Buccheri Manlio Gentile Luigi Librici 《Journal of heterocyclic chemistry》1977,14(5):853-855
The reactivity of the - system towards ferric chloride has been investigated. The cyclo-oxidation reaction led to the formation of 2-amino-5-thenoyl-1,3,4-thiadiazoles and 4-methyl-5-imino-2-thenoyl-Δ2-1,3,4-thiadiazolines. Their structures were proven spectro-scopically and chemically (nucleophilic attack and formation of the related 2-amino-1,3,4-thiadiazoles and 4-methyl-5-imino-Δ2-1,3,4-thiadiazolines). 相似文献
9.
Suntharavathanan Mahalingam Mohan Edirisinghe 《Macromolecular rapid communications》2013,34(14):1134-1139
A new route consisting of simultaneous centrifugal spinning and solution blowing to form polymer nanofibers is reported. The fiber diameter (60–1000 nm) is shown to be a function of polymer concentration, rotational speed, and working pressure of the processing system. The fiber length is dependent on the rotational speed. The process can deliver 6 kg of fiber per hour and therefore offers mass production capabilities compared with other established polymer nanofiber generation methods such as electrospinning, centrifugal spinning, and blowing.
10.
Using metallation and cross‐coupling reactions, we report the synthesis of a new series of push‐pull compounds with a pyrido[4,3‐d]pyrimidine system as the central core. Two of them were tested and their NLO properties highlighted. Incorporation of triple and double bonds as spacer between the central core and the substituted aryl groups has been performed to allow an extension of conjugation. 相似文献
11.
Frank R. Hartley Stephen G. Murray Philip N. Nicholson 《Journal of polymer science. Part A, Polymer chemistry》1982,20(9):2395-2408
p-Styryldiphenylphosphine was grafted onto polypropylene by γ-radiation. However, olefinic phosphines in general do not readily undergo such grafting. Among the many other olefinic phosphines examined only 1-(4-diphenylphosphinophenyl)-prop-1-ene and vinyldiphenylphosphine were grafted successfully and both had low grafting yields. The optimum conditions for grafting involve low dose rates and high total doses of γ-radiation in dimethylsulfoxide as solvent. This grafting is sensitive to impurities and inhomogeneity in the product readily results, especially at high grafting yields. Oxygen must be rigorously excluded if oxidation of grafted phosphorus(III) to phosphorus (V) is to be avoided. Phosphine oxides can be reduced to phosphines when grafted to the polymer with trichlorosilane. Mass spectrometry has shown that more than one olefinic phosphine binds to a single site in the polymer. Solid-state, high-resolution 31P-NMR is a valuable technique for characterizing the grafted polymer. The preparation and characterization of the following hitherto unreported phosphines is described: In addition, the precursor halides none of which has been reported, were prepared and characterized. 相似文献
12.
Wenbin Zhong Xianhong Chen Shoumei Liu Yongxin Wang Wantai Yang 《Macromolecular rapid communications》2006,27(7):563-569
Summary: Polyaniline (PANI) nanowires and sub‐micro/nanostructured dendrites are synthesized and immobilized on PP‐g‐PAA film surfaces via routine oxidative polymerization of aniline under different conditions, where grafting poly(acrylic acid) (PAA) served as a template and dopant, and SDS as a surfactant. The immobilized PANI enhances the surface hydrophilicity of the poly(propylene) (PP) films, and a superhydrophilic surface is obtained in this way. The mechanism of forming different morphologies of PANI and of correspondingly obtaining a superhydrophilic surface are briefly discussed.
13.
Ullrich Scherf Sylwia Adamczyk Andrea Gutacker Nils Koenen 《Macromolecular rapid communications》2009,30(13):1059-1065
Based on their rigid‐rod structure all‐conjugated, rod‐rod block copolymers show a preferred tendency to self‐assemble into low‐curvature vesicular or lamellar nanostructures independent from their specific chemical structure and composition. This unique and attractive behaviour is clearly illustrated in a few examples of such all‐conjugated block copolymers. The resulting nanostructured heteromaterials may find applications in electronic devices or artificial membranes.
14.
Jan Hlav
Pavel Hradil Radek Mlnický Lubomír Kvapil Petr lzar Martin Grepl Pavel Hradil Antonín Ly
ka Martin Grepl 《Journal of heterocyclic chemistry》2008,45(5):1437-1443
Coupling of various substituted phenacyl acetates 1 and diazonium salts 3 was studied. If the phenacyl acetates were substituted by an electronaceptor group such as CN or COOEt 3‐substituted phenyl‐5‐(phenyl‐hydrazono)‐5H‐furan‐2‐ones 4 were formed. Also synthesis of aza and diaza analogs is described. The compounds were characterized using MS and NMR spectroscopy. 相似文献
15.
Kazuo Soga Yutaka Tazuke Satoru Hosoda Sakuji Ikeda 《Journal of polymer science. Part A, Polymer chemistry》1977,15(1):219-229
Polymerization of propylene carbonate was carried out at 120–180°C mainly with the use of diethylzinc catalyst. The polymer was a pale-yellow, viscous material of relatively low molecular weight (1000–4000). From the spectroscopic analysis of the polymer and its hydrolyzed product, the polymer was determined to have the structure where x ? 0.50, y ? 0.25, and z ? 0.25. This strongly suggested that the polymerization of propylene carbonate proceeded via 2,7-dimethyl-1,4,6,9-tetraoxaspiro[4,4]nonane (DTN) as an intermediate compound. Hence, DTN was synthesized and polymerized with the use of diethylzinc catalyst. The structure of the polymer thus prepared coincided exactly with that of the polymer from propylene carbonate. From these, a plausible mechanism of the polymerization was developed. 相似文献
16.
Ruediger Iden Wolfgang Schrof Joachim Hadeler Stephan Lehmann 《Macromolecular rapid communications》2003,24(1):63-72
With combinatorial materials research (CMR), a new research approach toward the development and optimization of materials has been established at BASF. While adopting the basic ideas of combinatorial chemistry, CMR faces a whole bunch of challenges throughout the entire combinatorial process loop. New concepts for sample preparation on a smaller scale, i.e. synthesis and formulation, for parallel or fast sequential screening and characterization, and for appropriate management of yet unknown amounts of data have been developed. The integration of as many as possible workflow steps and the interplay of experts from various relevant fields, such as chemistry, engineering, robotics, informatics, and physics, are necessary. First results in the fields of polymer synthesis and coatings formulation give an impression of the innovative power and efficiency of this new kind of research.
17.
Akira Tai Fukuji Higashi Soichiro Yokomizo 《Journal of polymer science. Part A, Polymer chemistry》1971,9(9):2481-2491
The structural changes of the polymers having the following structures: at high temperatures were studied by the spectroscopic and thermal analysis. When the polymers were heated in air, they were oxidized predominantly to polymers having the structure: The rate of oxidation was fast and the reaction was almost completed within 2 hr at 180°C. In the case of polymer 3, an intramolecular cyclization to form acridone was detected as a minor reaction. 相似文献
18.
Stable aromatic macrolactones have been synthesized and characterized from 2‐ and 3‐substituted phenylalkanoic acid systems in modest yields. 相似文献
19.
Charles E. Carraher 《Journal of polymer science. Part A, Polymer chemistry》1971,9(12):3661-3670
Titanium polyesters of the form where Cp denotes cyclopentadiene, have been synthesized by utilizing both the interfacial and solution techniques. Polymer yield increases with reaction time. The reactive titanium reactant in the solution polycondensations is believed to be the Cp2Ti+2 cation. 相似文献
20.
Ionized cyclopentanol and [C5H10O]+˙ ions with the oxygen on the first carbon lose methyl, ethylene, ethyl, ethane and water in their metastable decompositions. We show by collisionally activated decompositions of the products that the losses of ethyl form CH3CH2C?O+, the losses of ethylene form , and the losses of methyl probably yield . Deuterium labeling indicates that ethyl loss from ionized cyclopentanol occurs following α-cleavage of the ring, isomerization to the enol isomer of ionized n-pentanal and subsequent isomerization to the 3-pentanone ion. 相似文献