Compatibility of PNIMMO with some energetic materials

The compatibility of poly(3-nitromethyl-3-methyloxetane) (PNIMMO) with some energetic materials are studied by using pressure DSC method in detail. Cyclotetramethylenetetranitroamine (HMX), cyclotrimethylenetrinitramine (RDX), nitrocellulose (NC), nitroglycerine (NG), N-nitrodihydroxyethylaminedinitrate (DINA), and aluminum powder (Al) are used as common energetic materials, and 3,4-dinitrofurzanfuroxan (DNTF), 1,3,3-trinitroazetidine (TNAZ), hexanitrohexazaisowurtzitane (CL-20), 4,6-dinitro-5,7-diaminobenzenfuroxan (CL-14), 1,1-diamino-2,2-dinitroethylene (DADNE), and 4-amino-5-nitro-1,2,3-triazole (ANTZ) are used as new energetic materials. The results show that the binary systems of PNIMMO with HMX, RDX, NC, NG, DINA, Al, CL-14 and DADNE are compatible, with TNAZ, CL-20 and ANTZ are slightly sensitive, and with DNTF is sensitive.     

超级铝热剂的制备、表征及其燃烧催化作用

用纳米铝粉和纳米氧化铅、纳米氧化铜和纳米三氧化二铋为原料,采用超声分散复合的方法,制备了纳米超级铝热剂Al/PbO、Al/CuO和Al/Bi₂O₃。采用X射线粉末衍射(XRD)、扫描电镜及能谱分析(SEM-EDS)和红外光谱(IR)对原料和产物的物相、组成、形貌和结构进行分析表征;运用差示扫描量热仪(DSC)评估三种超级铝热剂与双基推进剂主要组分的相容性;研究了3种超级铝热剂对双基推进剂燃烧性能的影响。结果表明,Al/PbO、Al/CuO和Al/Bi₂O₃与推进剂主要组分硝化棉(NC)、硝化棉/硝化甘油(NC/NG)混合物和吉纳(DINA)的相容性均良好,而与黑索今(RDX)和1,3-二甲基-1,3-二苯基脲(C₂)相对较为敏感;含三种纳米超级铝热剂的双基推进剂表现出优异的燃烧性能。     

Synthesis,Crystal Structure,and Properties of Energetic Complexes Constructed from Transition Metal Cations (Fe,Co, Cu,and Pb) and BTO2−

Four transition metal energetic complexes with 5,5′‐bistetrazole‐1,1′‐diolatedehydrate (BTO) have been synthesized and structurally characterized by FT‐IR spectroscopy, elemental analysis, and single X‐ray diffraction. The thermal decomposition processes of the complexes and BTO were studied by means of the TG‐TDA technologies. The compatibility of the four complexes with RDX, HMX, NC, and Al powder was also investigated. Sensitivity tests reveal that the complexes are more insensitive to mechanical stimuli than RDX.     

Morphology and dielectric properties of an epoxy network modified by end‐functionalized liquid polybutadiene

Epoxy resin networks modified with different functionalized liquid polybutadiene were characterized by scanning electron microscopy, atomic force microscopy (AFM), and dielectric thermal analysis techniques. Different morphologies were observed for these different systems, which were attributed to different interaction degrees between the components. Hydroxyl‐terminated polybutadiene (HTPB) and carboxyl‐ terminated polybutadiene (CTPB) resulted in epoxy networks with two‐phase morphology that differed in rubber particle size. The use of isocyanate‐terminated polybutadiene (NCOTPB) resulted in transparent thermoset material, whose rubber domains were in the nanoscale dimension, only detected by the AFM technique. The different morphological aspects in these epoxy systems also affected the dielectric properties. The epoxy–HTPB network exhibited two low temperature relaxation peaks corresponding to two different phases present in the system, whereas the epoxy–CTPB or epoxy–NCOTPB systems, whose rubber particles are well adhered to the epoxy matrix by chemical bonds, displayed only one single low temperature relaxation peak. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4053–4062, 2004     

Using molecular recognition of β-cyclodextrin to determine molecular weights of low-molecular-weight explosives by MALDI-TOF mass spectrometry

This study presents a novel method for determining the molecular weights of low molecular weight (MW) energetic compounds through their complexes of beta-cyclodextrin (beta-CD) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) in a mass range of 500 to 1700 Da, avoiding matrix interference. The MWs of one composite explosive composed of 2,6-DNT, TNT, and RDX, one propellant with unknown components, and 14 single-compound explosives (RDX, HMX, 3,4-DNT, 2,6-DNT, 2,5-DNT, 2,4,6-TNT, TNAZ, DNI, BTTN, NG, TO, NTO, NP, and 662) were measured. The molecular recognition and inclusion behavior of beta-CD to energetic materials (EMs) were investigated. The results show that (1) the established method is sensitive, simple, accurate, and suitable for determining the MWs of low-MW single-compound explosives and energetic components in composite explosives and propellants; and (2) beta-CD has good inclusion and modular recognition abilities to the above EMs.     

An investigation on eutectic binary phase diagram of volatilizable energetic materials by high pressure DSC

The eutectic binary phase diagrams of volatilizable energetic material 1,3,3-trinitroazetidine (TNAZ) with 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX) and 1-methyl-2,4-dinitroimidazole (MDNI) have been investigated by high pressure differential scanning calorimeter (PDSC), respectively. The liquefying and melting processes of TNAZ/RDX and TNAZ/MDNI volatilizable systems have been studied. On the basis of the data of apparent fusion heat and liquefying temperature, the phase diagrams of apparent fusion heat (H) with composition (X) and liquefying temperature (T) with composition (X) were constructed, respectively. The results showed that the gasification or volatilization of easy volatile energetic materials could be efficiently restrained by high pressure atmosphere, and the perfect and ideal phase diagrams can be constructed. The eutectic temperatures for TNAZ/RDX and TNAZ/MDNI are measured to be 95.5 and 82.3 °C, respectively. The eutectic compositions of mole ratios for the two systems are obtained to be 93.55/6.45 (T–X method), 93.79/6.21 (H–X method) and 62.25/37.75 (T–X method), 63.29/33.71 (H–X method), respectively.     

New theoretically predicted RDX‐ and β‐HMX‐based high‐energy‐density molecules

Theoretically new high‐energy‐density materials (HEDM) in which the hydrogens on RDX and β‐HMX (hexahydro‐1,3,5‐trinitro‐1,3,5‐triazine and octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine, respectively) were sequentially replaced by (N NO₂)x functional groups were designed and evaluated using density functional theory calculations in combination with the Kamlet–Jacobs equations and an atoms‐in‐molecules (AIM) analysis. Improved detonation properties and reduced sensitivity compared to RDX and β‐HMX were predicted. Interestingly, the RDX and β‐HMX derivatives having one attached N NO₂ group [RDX‐(NNO₂)1 and HMX‐(NNO₂)1] showed excellent detonation properties (detonation velocities: 9.529 and 9.575 km·s⁻¹, and detonation pressures: 40.818 and 41.570 GPa, respectively), which were superior to the parent compounds. Sensitivity estimations obtained by calculating impact sensitivities and HOMO‐LUMO gaps indicated that RDX‐(NNO₂)1 and HMX‐(NNO₂)1 were less stable than RDX and HMX but more stable than any of the other derivatives. This method of sequential NNO₂ group attachment on conventional HEDMs offers a firm basis for further studies on the design of new explosives. Furthermore, the newly found structures may be promising candidates for better HEDMs.     

Analysis of explosives using electrospray ionization/ion mobility spectrometry (ESI/IMS)

The analysis of explosives with ion mobility spectrometry (IMS) directly from aqueous solutions was shown for the first time using an electrospray ionization technique. The IMS was operated in the negative mode at 250°C and coupled with a quadrupole mass spectrometer to identify the observed IMS peaks. The IMS response characteristics of trinitrotoluene (TNT), 2,4-dinitrotoluene (2,4-DNT), 2-amino-4,6-dinitrotoluene (2-ADNT), 4-nitrotoluene (4-NT), trinitrobenzene (TNB), cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX), cyclo-tetramethylene-tetranitramine (HMX), dinitro-ethyleneglycol (EGDN) and nitroglycerine (NG) were investigated. Several breakdown products, predominantly NO₂⁻ and NO₃⁻, were observed in the low-mass region. Nevertheless, all compounds with the exception of NG produced at least one ion related to the intact molecule and could therefore be selectively detected. For RDX and HMX the [M+Cl⁻]⁻ cluster ion was the main peak and the signal intensities could be greatly enhanced by the addition of small amounts of sodium chloride to the sprayed solutions. The reduced mobility constants (K₀) were in good agreement with literature data obtained from experiments where the explosives were introduced into the IMS from the vapor phase. The detection limits were in the range of 15–190 μg l⁻¹ and all calibration curves showed good linearity. A mixture of TNT, RDX and HMX was used to demonstrate the high separation potential of the IMS system. Baseline separation of the three compounds was attained within a total analysis time of 6.4 s.     

端羟基聚丁二烯/增塑剂共混物相容性的分子动力学模拟

固体推进剂和炸药的力学性能在很大程度上依赖于配方中高分子粘结剂与增塑剂的相容性. 本文对相容和非相容两种体系进行了分子动力学(MD)模拟, 以考察分子模拟方法的实用性. 为预测固体推进剂中端羟基聚丁二烯(HTPB)与增塑剂癸二酸二辛酯(DOS)、硝化甘油(NG)的相容性, 采用MD模拟方法在COMPASS力场下, 对HTPB、DOS、NG和共混物HTPB/DOS、HTPB/NG的密度、内聚能密度及溶度参数等进行了模拟计算. 通过比较溶度参数差值(△δ)的大小、分子间径向分布函数和模拟前后体系密度变化情况均可以预测HTPB/DOS属于相容体系,而HTPB/NG属于不相容体系, 与实验结果一致. 径向分布函数分析同时揭示了HTPB/增塑剂组分之间的相互作用及本质. 本文的模拟方法可以作为预测聚合物与增塑剂相容性的有利工具, 也可以为固体推进剂和炸药的配方设计提供理论指导.     

Low‐pressure barrier discharge ion source using air as a carrier gas and its application to the analysis of drugs and explosives

In this work, a low‐pressure air dielectric‐barrier discharge (DBD) ion source using a capillary with the inner diameter of 0.115 and 12 mm long applicable to miniaturized mass spectrometers was developed. The analytes, trinitrotoluene (TNT), 1,3,5‐trinitroperhydro‐1,3,5‐triazine (RDX), 1,3,5,7‐tetranitroperhydro‐1,3,5,7‐tetrazocine (HMX), pentaerythritol tetranitrate (PETN), nitroglycerine (NG), hexamethylene triperoxide diamine (HMTD), caffeine, cocaine and morphine, introduced through the capillary, were ionized by a low‐pressure air DBD. The ion source pressures were changed by using various sizes of the ion sampling orifice. The signal intensities of those analytes showed marked pressure dependence. TNT was detected with higher sensitivity at lower pressure but vice versa for other analytes. For all analytes, a marked signal enhancement was observed when a grounded cylindrical mesh electrode was installed in the DBD ion source. Among nine analytes, RDX, HMX, NG and PETN could be detected as cluster ions [analyte + NO₃]^? even at low pressure and high temperature up to 180 °C. The detection indicates that these cluster ions are stable enough to survive under present experimental conditions. The unexpectedly high stabilities of these cluster ions were verified by density functional theory calculation. Copyright © 2016 John Wiley & Sons, Ltd.     

超级铝热剂Al/Fe2O3的制备、表征及对环三亚甲基三硝胺热分解的影响

采用水热法制备了中空短棒状纳米Fe2O3,并用超声分散法将其与纳米Al颗粒复合为单金属氧化基超级铝热剂.利用X射线粉末衍射(XRD)、傅里叶变换红外(FTIR)光谱、扫描电镜及能量散射光谱仪(SEM-EDS)对样品进行表征.并运用差示扫描量热法(DSC)对比研究了超级铝热剂Al/Fe2O3、Al粉和纳米Fe2O3对环三亚甲基三硝胺(RDX)热分解特性的影响.结果表明:超级铝热剂的加入改变了RDX的热分解过程,并加剧了RDX的二次气相反应;随着超级铝热剂含量的增加,RDX的分解峰峰形发生了明显的改变;Al/Fe2O3、Al粉和Fe2O3对RDX热分解的作用主要表现为二次分解峰逐渐明显且峰温降低.     

端羟基聚丁二烯/增塑剂共混物相容性的分子动力学模拟和介观模拟

应用分子动力学(MD)和介观动力学(MesoDyn)模拟方法对固体推进剂中端羟基聚丁二烯(HTPB)与增塑剂癸二酸二辛酯(DOS)、硝化甘油(NG)的相容性进行了研究. 采用MD模拟方法在COMPASS力场下, 对纯物质、HTPB/增塑剂共混物的密度、内聚能密度、溶度参数和共混物分子间的Flory-Huggins作用参数及结合能等进行了模拟计算, 通过比较溶度参数差值(Δδ)的大小、模拟前后体系密度变化情况均可以预测HTPB与增塑剂的相容性, 结合能的分析揭示了HTPB/增塑剂共混物组分间的相互作用及本质. 将Flory-Huggins作用参数转化为MesoDyn模拟的输入参数, 采用MesoDyn模拟方法对HTPB/增塑剂共混体系的介观形貌与动力学演变过程进行了研究, 通过模拟得到的等密度图、自由能密度和有序度参数等可以判断共混体系的相容性. MD和MesoDyn模拟结果均表明: HTPB/DOS属于相容体系, 而HTPB/NG属于不相容体系, 其结论与实验结果一致.     

The Curing Process and Elastic Modulus of HTPB-Containing Polyurethanes

By means of the functionality distribution deduced and weight averaged functionality a and molecular size vb2, the sol-gel distribution equations of HTPB(Hydroxyl terminated polybutadiene) + TDI (Toluene-2, 4-diisocyanate) expressed by the model of Aai-B2 type polycondensation were solved and the elastic modulus were calculated. The experimental results of HTPB+TDI curing process indicate that a, vb2 and functionality distribution function are available basically.     

Density functional theory studies of effects of boron replacement on the structure and property of RDX and HMX

In this study, based on two model nitramine compounds hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) and octahydro-1,3,5,7-tetranitro-1,3,5, 7-tetrazocine (HMX), two series of new energetic molecules were designed by replacing carbon atoms in the ring with different amounts of boron atoms, their structures and performances were investigated theoretically by the density functional theory method. The results showed that the boron replacement could affect the molecular shape and electronic structure of RDX and HMX greatly, and then would do harm to the main performance like the heat of formation, density, and sensitivity. However, the compound RDX-B2 is an exception; it was formed by replacing two boron atoms into the system of RDX and has the symmetric boat-like structure. Its oxygen balance (4.9%), density (1.91 g/cm³), detonation velocity (8.85 km/s), and detonation pressure (36.9 GPa) are all higher than RDX. Furthermore, RDX-B2 has shorter and stronger N NO₂ bonds than RDX, making it possesses lower sensitivity (45 cm) and better thermal stability (the bond dissociation energy for the N NO₂ bond is 204.7 kJ/mol) than RDX. Besides, RDX-B1 and HMX-B4 also have good overall performance; these three new molecules may be regarded as a new potential candidate for high energy density compounds.     

A systematic tandem mass spectrometric study of anion attachment for improved detection and acidity evaluation of nitrogen‐rich energetic compounds

The development of rapid, efficient, and reliable detection methods for the characterization of energetic compounds is of high importance to security forces concerned with terrorist threats. With a mass spectrometric approach, characteristic ions can be produced by attaching anions to analyte molecules in the negative ion mode of electrospray ionization mass spectrometry (ESI‐MS). Under optimized conditions, formed anionic adducts can be detected with higher sensitivities as compared with the deprotonated molecules. Fundamental aspects pertaining to the formation of anionic adducts of 1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocane (HMX), 1,3,5‐trinitro‐1,3,5‐triazinane (RDX), pentaerythritol tetranitrate (PETN), nitroglycerin (NG), and 1,3,5‐trinitroso‐1,3,5‐triazinane energetic (R‐salt) compounds using various anions have been systematically studied by ESI‐MS and ESI tandem mass spectrometry (collision‐induced dissociation) experiments. Bracketing method results show that the gas‐phase acidities of PETN, RDX, and HMX fall between those of HF and acetic acid. Moreover, PETN and RDX are each less acidic than HMX in the gas phase. Nitroglycerin was found to be the most acidic among the nitrogen‐rich explosives studied. The ensemble of bracketing results allows the construction of the following ranking of gas‐phase acidities: PETN (1530‐1458 kJ/mol) > RDX (approximately 1458 kJ/mol) > HMX (approximately 1433 kJ/mol) > nitroglycerin (1427‐1327.8 kJ/mol).     

Mass spectral fragmentation pathways in RDX and HMX. A mass analyzed ion kinetic energy spectrometric/collisional induced dissociation study

A collisional induced dissociation study of 1,3,5-trinitro-1,3,5 triazacyclohexane (RDX) and 1,3,5,7-tetranitro-1,3,5,7-tetrazacyclooctane (HMX) was carried out using mass analyzed kinetic energy spectrometry. High resolution mass spectra and mass analyzed ion kinetic energy/collisional induced dissociation spectra of RDX and HMX were recorded in the electron impact, chemical ionization and negative ion chemical ionization modes. Fragmentation pathways of the compounds investigated were determined in all three modes of ionization. It was found that a major part of the fragment ions in RDX and HMX originate from formation of the aduct ions [M+NO]⁺ and [M+NO₂]⁺ in electron impact and chemical ionization, and from [M+NO]^? and [M+NO₂]^? in negative chemical ionization, followed by dissociation.     

Passive standoff detection of RDX residues on metal surfaces via infrared hyperspectral imaging

Hyperspectral images of galvanized steel plates, each containing a stain of cyclotrimethylenetrinitramine (RDX), were recorded using a commercial long-wave infrared imaging spectrometer. Demonstrations of passive RDX chemical detection at areal dosages between 16 and 90 μg/cm² were carried out over practical standoff ranges between 14 and 50 m. Anomaly and target detection algorithms were applied to the images to determine the effect of areal dosage and sensing distance on detection performance for target RDX. The anomaly detection algorithms included principal component analysis, maximum autocorrelation factors, and principal autocorrelation factors. Maximum difference factors and principal difference factors are novel multivariate edge detection techniques that were examined for their utility in detection of the RDX stains in the images. A target detection algorithm based on generalized least squares was applied to the images, as well, to see if the algorithm can identify the compound in the stains on the plates using laboratory reflection spectra of RDX, cyclotetramethylenetetranitramine (HMX), and 2,4,6-trinitrotoluene (TNT) as the target spectra. The algorithm could easily distinguish between the nitroaromatic (TNT) compound and the nitramine (RDX, HMX) compounds, and, though the distinction between RDX and HMX was less clear, the mean weighted residuals identified RDX as the stain on the plate. Improvements that can be made in this detection technique are discussed in detail. As expected, it was found that detection was best for short distances and higher areal dosages. However, the target was easily detected at all distances and areal dosages used in this study. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Neutral desorption using a sealed enclosure to sample explosives on human skin for rapid detection by EESI-MS

A novel air-tight neutral desorption enclosure has been fabricated to noninvasively sample low picograms of explosives 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetraazocine (HMX), triacetone triperoxide (TATP), and nitroglycerin (NG) from human skin using a neutral nitrogen gas beam. Without further sample pretreatment, the explosive mixtures collected from the skin surface were directly transported by a nitrogen carrier gas over a 4-m distance for sensitive detection and rapid identification by extractive electrospray ionization tandem mass spectrometry.     

含三唑基希夫碱的锰配合物的合成及结构

合成了4-(4-氯苯基亚甲基)亚胺-1,2,4-三唑希夫碱配体(L),以及希夫碱的配合物[Mn(SO4)(H2O)2L]n,并对配合物进行了结构表征。该配合物是1个用硫酸根桥连而成的一维链状配位聚合物,相邻的链通过水分子和硫酸根的氢键相互作用形成了二维超分子结构。利用DSC技术测试了配合物和固体推进剂主要组分(HMX,NC,RDX)的二元混合体系的热分解行为。本文也对配合物做了元素,红外光谱分析。     

Molecular dynamics simulation studies of the ε-CL-20/HMX co-crystal-based PBXs with HTPB

Molecular dynamics simulations were carried out to explore a ε-CL-20/HMX (2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexazaisowurtzitane/1,3,5,7-tetranitro-1,3,5,7- tetrazacyclooctane) co-crystal-based polymer-bonded explosive (PBX) with HTPB (hydroxyl-terminated polybutadiene). The binding energies, pair correlation functions, and mechanical properties of the PBXs were reported. From the calculated binding energy, it was found that the order of the binding energies per unit surface between the crystalline surface and HTPB is (0 1 0) > (1 0 0) > (0 0 1). The pair correlation function revealed that the H···O and H···N H-bonds exist on the interfaces between the crystalline surfaces and HTPB, and the number of H???O hydrogen bonds (H-bonds) atom pairs is ten times more than that of H???N H-bonds. Additionally, the calculated mechanical data indicated that the stiffness of the co-crystal/HTPB PBX is weaker and its ductility is better than those of the co-crystal.