Cyano- and isocyanotris(trifluoromethyl)borates: syntheses, spectroscopic properties, and solid state structures of K[(CF3)3BCN] and K[(CF3)3BNC

A two step synthesis to the isocyanotris(trifluoromethyl)borate anion, [(CF3)3BNC]-, and its isomerization to the cyanotris(trifluoromethyl)borate anion, [(CF3)3BCN]-, at temperatures above 150 degrees C are presented. In the first step (CF3)3BNCH was obtained by reacting (CF3)3BCO with hydrogen cyanide followed by deprotonation of the HCN adduct with Li[N(SiMe3)2] in toluene. The thermal behavior of K[(CF3)3BNC] and K[(CF3)3BCN] were investigated by differential scanning calorimetry (DSC), and K[BF4] was identified as a major solid decomposition product. The enthalpy of the isocyanide-cyanide rearrangement, deltaH(iso) = -35 +/- 4 kJ mol(-1), was obtained from DSC measurements, and the activation energy, E(a) = 180 +/- 20 kJ mol(-1), from kinetic measurements. The isomerization was modeled as an intramolecular reaction employing DFT calculations at the B3LYP/6-311+G(d) level of theory yielding a reaction enthalpy of deltaH(iso) = -36.1 kJ mol(-1) and an activation energy of E(a) = 155.7 kJ mol(-1). The solid-state structures of K[(CF3)3BNC] and K[(CF3)3BCN] were determined by single-crystal X-ray diffraction. Both salts are isostructural and crystallize in the orthorhombic space group Pnma (no. 62). In the crystals the borate anions possess C(s) symmetry, while for the energetic minimum C3 symmetry is predicted by DFT calculations. The borate anions have been characterized by IR and Raman spectroscopy as well as by NMR spectroscopy. The assignment of the IR and Raman bands is supported by their calculated wavenumbers and intensities. The spectroscopic and structural properties of both borate anions are compared to the properties of the isoelectronic borane carbonyl (CF3)3BCO and the [B(CF3)4]- anion as well as to those of other related species.     

Reactions of (CF3)3BCO with amines and phosphines

Reactions of tris(trifluoromethyl)borane carbonyl, (CF(3))(3)BCO, with ammonia yielded either a mixture of [NH(4)][(CF(3))(3)BC(O)NH(2)], [NH(4)][(CF(3))(3)BCN], and [NH(4)](2)[{(CF(3))(3)BC(O)}(2)NH] or neat [NH(4)](2)[{(CF(3))(3)BC(O)}(2)NH] depending on the reaction conditions. The salt K[(CF(3))(3)BC(O)NH(2)] was obtained as the sole product from the reaction of NH(3) with K[(CF(3))(3)BC(O)F]. A simple synthesis for cyanotris(trifluoromethyl)borates, M[(CF(3))(3)BCN], was developed by dehydration of M[(CF(3))(3)BC(O)NH(2)] (M = [NH(4)], K) using phosgene. In addition, syntheses of the tris(trifluoromethyl)boron species [(CF(3))(3)BC(O)NH(n)()Pr](-), [(CF(3))(3)BC(O)NMe(2)](-), and (CF(3))(3)BC(O)NMe(3), as well as of (CF(3))(3)BC(O)PMe(3), were performed. All species were characterized by multinuclear NMR spectroscopy. As far as neat substances resulted, IR and Raman spectra were recorded and their thermal behaviors were studied by differential scanning calorimetry. The interpretation of reaction pathways, structures, and vibrational spectra are supported by DFT calculations. The solid-state structure of K(2)[{(CF(3))(3)BC(O)}(2)NH].2MeCN was determined by single-crystal X-ray diffraction.     

Cesium hydridotris(trifluoromethyl)borate, Cs[(CF3)3BH

Treatment of Cs[(CF3)3BNH2] with the aminating agent H2NOSO3H in aqueous solution allowed the isolation of pure Cs[(CF3)3BH], which is stable up to 300 degrees C. Due to the strong electron-withdrawing effect of the CF3 substituents, the [(CF3)3BH]- anion behaves as a very unreactive hydride. It is stable in concentrated hydrochloric acid for many days but reacts cleanly with F2, Cl2, and Br2 to the corresponding haloborates. The molecular structure was determined by single-crystal X-ray diffraction. Crystal data: orthorhombic, space group Pnma; a = 11.4296(5) A, b = 7.9510(4) A, c = 9.7268(5) A; V = 883.94(7) A(3), Z = 4; R1 = 0.0294, wR2 = 0.0818. The anions exhibit only Cs symmetry in the lattice. The natural and deuterated anions were characterized by IR, Raman, and multinuclear NMR spectroscopy; vibrational assignments were supported by DFT calculations. QTAIM charges derived from the B3LYP electron density are given for [(CF3)3BH]- and several related anions.     

Adduct formation or metathesis reactions of silver complexes containing the fluorinated ligands [HB(3,5-(CF3)2Pz)3]- and [CF3SO3]-: formation of silver adducts containing unsupported silver-germanium bonds

A mixture of [HB(3,5-(CF3)2Pz)3]Ag(eta 2-toluene) and [(Me)2ATI]GeCl in CH2Cl2, rather than undergoing metathesis, formed a 1:1 adduct [HB(3,5-(CF3)2Pz)3]Ag<--GeCl[(Me)2ATI] (1, where [HB(3,5-(CF3)2Pz)3] = hydrotris(3,5-bis(trifluoromethyl)pyrazolyl)borate and [(Me)2ATI] = N-methyl-2-(methylamino)troponiminate) featuring a silver-germanium bond. Solutions of 1 (in CH2Cl2 or toluene) did not precipitate AgCl even after several days. However, it easily underwent metathesis with CF3SO3Ag, leading to the chloride-free product [HB(3,5-(CF3)2Pz)3]Ag<--Ge(OSO2CF3)[(Me)2ATI] (2). Compounds 1 and 2 were characterized by X-ray crystallography. The Ag-Ge bond distances of 1 and 2 are 2.4215(9) and 2.4116(10) A, respectively.     

The d4/d3 redox pairs [MX(CO)(eta-RC[triple bond, length as m-dash]CR)Tp']z (z=0 and 1): structural consequences of electron transfer and implications for the inverse halide order

The d4 halide complexes [MX(CO)(eta-RC[triple bond, length as m-dash]CR)Tp'] {X=F, Cl, Br or I; R=Me or Ph; M=Mo or W; Tp'=hydrotris(3,5-dimethylpyrazolyl)borate} undergo one-electron oxidation to the d3 monocations [MX(CO)(eta-RC[triple bond, length as m-dash]CR)Tp']+, isolable for M=W, R=Me. X-Ray structural studies on the redox pairs [WX(CO)(eta-MeC[triple bond, length as m-dash]CMe)Tp']z (X=Cl and Br, z=0 and 1), the ESR spectra of the cations [WX(CO)(eta-RC[triple bond, length as m-dash]CR)Tp']+ (X=F, Cl, Br or I; R=Me or Ph), and DFT calculations on [WX(CO)(eta-MeC[triple bond, length as m-dash]CMe)Tp']z (X=F, Cl, Br and I; z=0 and 1) are consistent with electron removal from a HOMO (of the d4 complexes) which is pi-antibonding with respect to the W-X bond, pi-bonding with respect to the W-C(O) bond, and delta-bonding with respect to the W-Calkyne bonds. The dependence of both oxidation potential and nu(CO) for [MX(CO)(eta-RC[triple bond, length as m-dash]CR)Tp'] shows an inverse halide order which is consistent with an ionic component to the M-X bond; the small size of fluorine and its closeness to the metal centre leads to the highest energy HOMO and the lowest oxidation potential. In the cations [MX(CO)(eta-RC[triple bond, length as m-dash]CR)Tp']+ electronegativity effects become more important, leading to a conventional order for Cl, Br and I. However, high M-F pi-donation is still facilitated by the short M-F distance.     

Synthesis, Crystal Structure and Hydrogenation Catalysis of a CF3-BINAP（O）-Rh-COD Complex

The complex [(CF3-BINAP(O))Rh(COD)][ClO4]·Et2O(2,CF3-BINAP(O)=2-{bis[3,5-bis(trifluoromethyl)phenyl]phosphino}-2-{bis[3,5-bis(trifluoromethyl)phenyl]phosphinyl}-1,1-binaphthyl, COD=1,5-cyclooctadiene) was obtained directly from the reaction of CF 3-BINAP(O) ligand with [Rh(COD)][ClO4]. Complex 2 has been characterized by single-crystal X-ray diffraction. The crystal adopts space group P21/n with a=19.0727(4), b=15.6275(4), c=22.3039(6), β=112.3570(10)°, V=6148.2(3)3 , Z=4, Dc=1.693 g/cm3 , F(000)=3144, μ(MoKα)=0.500 mm-1 , the final R=0.0947 and wR=0.2501. Structural studies reveal that Rh(I) is coordinated by one oxygen and one phosphorus in the same ligand. Asymmetric hydrogenation of acetami- docinnamic acid with compound 2 was also evaluated.     

Activation of C--H... Halogen (Cl, Br, and I) hydrogen bonds at the organic/inorganic interface in fluorinated tetrathiafulvalenes salts

The electrocrystallization of fluorinated bis(2,2'-difluoropropylenedithio)tetrathiafulvalene (1) in the presence of linear (ICl2-, IBr2-, I2Br-) or cluster ([Mo6Cl14]2-) anions affords 1:1 and 2:1 cation radical salts such as [1][ICl2] and [1]2[Mo6Cl14].(CH3CN)2. In both salts, the 1*+ radical ion adopts a boat conformation and envelops the anion through C-H...Hal(anion) (Hal(anion) = Cl, Br, I) hydrogen bonds. This demonstrates the activating role of the neighboring electron-withdrawing CF2 moieties in the stabilization of bi- or trimolecular neutral entities. With smaller linear anions, fluorine segregation controls the solid-state associations of the bimolecular [1]*+[X] entities, and gives rise to layered materials with a limited overlap interaction between the open-shell organic cations and magnetic spin chain behavior. With the larger [Mo6Cl14]2 ions, a strong overlap interaction between radical cations gives rise to diamagnetic [1]2(2+) dimers, which alternate with the cluster anions to form hybrid organic/inorganic ...[1]2(2+)[Mo6Cl14]2... chains. This behavior is also observed in [2]2(2+)[Mo6Cl14]2-.(CH2Cl2)2, in which compound 2 is the unsymmetrically substituted (ethylenedithio)(2,2'-difluoropropylenedithio)tetrathiafulvalene. On the other hand, the unsymmetrically substituted 2,2'-difluoropropylenedithiotetrathiafulvalene (3) affords a mixed-valence 4:1 salt with [Mo6Cl14]2, which is formulated as [3]4[Mo6Cl14].(CH3CN)2. This semiconducting salt is characterized by the coexistence of both the fluorine/fluorine segregation (with solvent inclusion) and the organic/inorganic segregation (with delocalized overlap interactions). Both Csp2-H...Cl and Csp3-H...Cl hydrogen bonds facilitate the stabilization of the organic/inorganic interface and the presence of conducting organic slabs.     

Investigation of silver salt metathesis: preparation of cationic germanium(II) and Tin(II) complexes,and silver adducts containing unsupported silver-germanium and silver-tin bonds

Syntheses of halide derivatives of germanium(II) and tin(II) aminotroponiminate (ATI) complexes and their silver salt metathesis reactions have been investigated. The treatment of GeCl(2) x (1,4-dioxane), SnCl(2), or SnI(2) with [(n-Pr)(2)ATI]Li in a 1:1 molar ratio affords the corresponding germanium(II) or tin(II) halide complex [(n-Pr)(2)ATI]MX (where [(n-Pr)(2)ATI](-) = N-(n-propyl)-2-(n-propylamino)troponiminate; M = Ge or Sn; X = Cl or I). As usually expected, [(n-Pr)(2)ATI]GeCl and [(n-Pr)(2)ATI]SnCl undergo rapid metathesis with CF(3)SO(3)Ag, leading to trifluoromethanesulfonate salts, [[(n-Pr)(2)ATI]Ge][SO(3)CF(3)] and [[(n-Pr)(2)ATI]Sn][SO(3)CF(3)], and silver chloride. However, when the silver source [HB(3,5-(CF(3))(2)Pz)(3)]Ag(eta(2)-toluene) is used, rather than undergoing metathesis, very stable 1:1 adducts [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Ge(Cl)[(n-Pr)(2)ATI] and [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Sn(Cl)[(n-Pr)(2)ATI] are formed (where [HB(3,5-(CF(3))(2)Pz)(3)](-) = hydrotris(3,5-bis(trifluoromethyl)pyrazolyl)borate). The use of the iodide derivative [(n-Pr)(2)ATI]SnI did not change the outcome either. All new compounds have been characterized by multinuclear NMR spectroscopy and X-ray crystallography. The Ag-Ge and Ag-Sn bond distances of [HB(3,5-(CF(3))(2)Pz)(3)]Ag<-- Ge(Cl)[(n-Pr)(2)ATI], [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Sn(Cl)[(n-Pr)(2)ATI], and [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Sn(I)[(n-Pr)(2)ATI] are 2.4142(6), 2.5863(6), and 2.5880(10) A, respectively. A convenient route to [(n-Pr)(2)ATI]H is also reported.     

Oxygen-bridged borate anions from tris(pentafluorophenyl)borane: synthesis, NMR characterization, and reactivity

The previously known anion [(C6F5)3B(mu-OH)B(C6F5)3]- (2) has been prepared by a two-step procedure, involving deprotonation of (C6F5)3BOH2 to give [B(C6F5)3OH]- (1), followed by addition of B(C6F5)3. The solution structure and the dynamics of 2 have been investigated by 1H and 19F NMR spectroscopy. The reaction of [NHEt3]2 with NEt3 resulted in the formation of [NHEt3]+ [(C6F5)3BOH]-, [NHEt3]+ [(C6F5)3BH]-, and (C6F5)3B- (CH2CH=N+ Et2). This indicates that in the presence of a nucleophile anion 2 can dissociate to B(C6F5)3 and 1. The reaction of [HDMAN]2 with 1,8-bis(dimethylamino)naphthalene (DMAN) confirmed this trend. In the presence of water, 2 transformed into the adduct [(C6F5)3BO(H)H...O(H)B(C6F5)3]- (3), containing the borate 1 hydrogen-bonded to a water molecule coordinated to B(C6F5)3. The same compound is formed by treating (C6F5)3BOH2 with 0.5 equiv of a base. A competition study established that for 1 the Lewis acid-base interaction with B(C6F5)3 is about 5 times preferred over H-bonding to (C6F5)3BOH2. The X-ray single-crystal analysis of [2-methyl-3H-indolium]3 provided the first experimental observation of an asymmetric H-bond in the [H3O2]- moiety, the measured O-H and H...O bond distances being significantly different [1.14(2) vs 1.26(2) A]. The reaction of NEt3 with an equimolar mixture of B(C6F5)3 and bis(pentafluorophenyl)borinic acid, (C6F5)2BOH, afforded the novel borinatoborate salt [NHEt3]+ [(C6F5)3BOB(C6F5)2]- ([NHEt3]4). X-ray diffraction showed that the B-O bond distances are significantly shorter than in [(C6F5)3B(mu-OH)B(C6F5)3]-. Variable-temperature 19F NMR revealed high mobility of the five aryl rings, at variance with the more crowded anion 2. 2D NMR correlation experiments showed that in CD2Cl2 the two anions [(C6F5)3BOH]- and [(C6F5)3BH]- form tight ion pairs with [NHEt3]+, in which the NH proton establishes a conventional (BO...HN) or an unconventional (BH...HN), respectively, hydrogen bond with the anion. The diborate anions 2-4, on the contrary, gave loose ion pairs with the ammonium cation, due both to the delocalized anionic charge and to the more sterically encumbered position of the oxygen atoms that should act as H-bond acceptors.     

High-spin Ni(II) clusters: triangles and planar tetranuclear complexes

The exploration of the NiX(2)/py(2)CO/Et(3)N (X = F, Cl, Br, I; py(2)CO = di-2-pyridyl ketone; Et(3)N = triethylamine) reaction system led to the tetranuclear [Ni(4)Cl(2){py(2)C(OH)O}(2){py(2)C(OMe)O}(2)(MeOH)(2)]Cl(2)·2Et(2)O (1·2Et(2)O) and [Ni(4)Br(2){py(2)C(OH)O}(2){py(2)C(OMe)O}(2)(MeOH)(2)]Br(2)·2Et(2)O (2·2Et(2)O) and the trinuclear [Ni(3){py(2)C(OMe)O}(4)]I(2)·2.5MeOH (3·2.6MeOH), [Ni(3){py(2)C(OMe)O}(4)](NO(3))(0.65)I(1.35)·2MeOH (4·2MeOH) and [Ni(3){py(2)C(OMe)O}(4)](SiF(6))(0.8)F(0.4)·3.5MeOH (5·3.5MeOH) aggregates. The presence of the intermediate size Cl(-) and Br(-) anions resulted in planar tetranuclear complexes with a dense hexagonal packing of cations and donor atoms (tetramolybdate topology) where the X(-) anions participate in the core acting as bridging ligands. The F(-) and I(-) anions do not favour the above arrangement resulting in triangular complexes with an isosceles topology. The magnetic properties of 1-3 have been studied by variable-temperature dc, variable-temperature and variable-field ac magnetic susceptibility techniques and magnetization measurements. All complexes are high-spin with ground states S = 4 for 1 and 2 and S = 3 for 3.     

Fluorinated tris(pyrazolyl)borate ligands without the problematic hydride moiety: isolation of copper(I) ethylene and copper(I)-tin(II) complexes using [MeB(3-(CF3)Pz)3]-

The thallium derivative of a fluorinated, B-methylated, tris(pyrazolyl)borate ligand, [MeB(3-(CF3)Pz)3]-, has been synthesized via a two-step process using the corresponding pyrazole, Li[MeBH3], and thallium(I) acetate. Reaction of [MeB(3-(CF3)Pz)3]Tl with CuBr in the presence of ethylene leads to [MeB(3-(CF3)Pz)3]Cu(C2H4). It is a thermally stable solid. [MeB(3-(CF3)Pz)3]Cu(C2H4) reacts with [(Bn)2ATI]SnCl to yield [MeB(3-(CF3)Pz)3]Cu<--Sn(Cl)[(Bn)2ATI], featuring an unsupported Cu(I)-Sn(II) bond [2.4540(4) A].     

Polymeric anionic networks using dibromine as a crosslinker; the preparation and crystal structure of [(C4H9)4N]2[Pt2Br10].(Br2)7 and [(C4H9)4N]2[PtBr4Cl2].(Br2)6

The reaction of M[PtX3(CO)] (M+ = [(C4H9)4N]+, X = Br, Cl) with an excess of Br2 gives the new platinum(IV) salts, [(C4H9)4N]2[Pt2Br10].(Br2)7, 1, and [(C4H9)4N]2[PtBr4Cl2].(Br2)6, 2, which, in the solid state, contain strong Br Br interactions resulting in the formation of polymeric networks; they could provide useful solid storage reservoirs for elemental bromine.     

Spectroscopic and structural studies on polyfluorophenyl tellurides and tellurium(IV) dihalides

Bis(fluorophenyl) tellurides R2Te (R = C6F2H3 (1), CF3C6F4 (2), CF3C6F4OC6F4 (3), and C6F5 (4)) are synthesized by the facile reaction of Na2Te with bromo-fluorobenzenes, RBr. The corresponding bis(fluorophenyl)tellurium(IV) dihalides, R2TeHal2 (Hal = F, Cl, and Br) (5-16), are obtained by the oxidation of 1-4 with mild halogenating agents (XeF2, SO2Cl2, and Br2). The dihalides show temperature-dependent NMR spectra. On the basis of the 19F NMR spectra of the two series, (C6F2H3)2TeHal2 (Hal = F (5), Cl (9), and Br (13)) and R2TeCl2 (R = C6F2H3 (9), CF3C6F4 (10), CF3C6F4OC6F4 (11), and C6F5 (12)), the coalescence temperatures, T(c), and free enthalpies, DeltaG, of rotation of the TeC bonds are determined. The activation enthalpies for the dichlorides/dibromide 9-13 are in the range of 14.4-15.2 kcal mol(-1) and that for the difluoride 5 is considerably lower at 10.7 kcal mol(-1). In addition to thorough spectroscopic characterization of 1-16, the crystal structures of the monotellurides 2 and 4 as well as of the tellurium(IV) dihalides 5, 6, 9, 10, and 13 were determined. The dihalides show interesting intermolecular Te...Hal contacts, significantly shorter than the sum of the van der Waals radii, leading to different networks of association.     

2-rhodaoxetanes: their formation of oxidation of [RhI(ethene)]+ and their reactivity upon protonation

New cationic, pentacoordinate complexes [(TPA)Rh1(ethene)]+, [1a]+, and [(MeTPA)Rh1(ethene)]+, [1b]+, have been prepared (TPA = N,N,N-tri(2-pyridylmethyl)amine, MeTPA = N-[(6-methyl-2-pyridyl)-methyl]-N,N-di(2-pyridylmethyl)amine). Complex [1a]+ is selectively converted by aqueous HCl to [(TPA)RhIII-(ethyl)Cl]+, [2a]+. The same reaction with [1b]+ results in the [(MeTPA)RhIII-(ethyl)Cl]+ isomers [2b]+ and [2c]+. Treatment of [1a]+ and [1b]+ with aqueous H2O2 results in a selective oxygenation to the unsubstituted 2-rho-da(III)oxetanes (1-oxa-2-rhoda(III)cyclo-butanes) [(TPA)RhIII(kappa2-C,O-2-oxyethyl)]+, [3a]+, and [(MeTPA)RhIII(kappa2-C,O-2-oxyethyl)]+, [3b]+. The reactivity of 2-rhodaoxetanes [3a]+ and [3b]+ is dominated by the nucleophilic character of their 2-oxyethyl oxygen. Reaction of [3a]+ and [3b]+ with the non-coordinating acid HBAr(f)4 results in the dicationic protonated 2-rhodaoxetanes [(TPA)RhIII(kappa2-2-hydroxyethyl)]2+, [4a]2+, and [(MeTPA)RhIII(kappa2-2-hydroxyethyl)]2+, [4b]2+. These eliminate acetaldehyde at room temperature, probably via a coordinatively unsaturated kappa1-2-hydroxyethyl complex. In acetonitrile, complex [4a]2+ is stabilised as [(TPA)-RhIII(kappa1-2-hydroxyethyl)(MeCN)]2+, [5a]2+, whereas the MeTPA analogue [4b]2+ continues to eliminate acetaldehyde. Reaction of [3a]+ with NH4Cl and Mel results in the coordinatively saturated complexes [(TPA)RhIII(kappa1-2-hydroxyethyl)(Cl)]+, [6a]+, and [(TPA)-RhIII(kappa1-2-methoxyethyl)(I)+, [7a]+, respectively. Reaction of [3a]+ with NH4+ in MeCN results in formation of the dicationic metallacyclic amide [(TPA)-RhIII [kappa2-O,C-2-(acetylamino)ethyl]]2+, [9]2+, via the intermediates [4a]2+, [5a]2+ and the metallacyclic iminoester [(TPA)RhIII[kappa2-N,C-2-(acetimidoyloxy)ethyl]]2+, [8]2+. The observed overall conversion of the [Rh(I)(ethene)] complex [1a]+ to the metallacyclic amide [9]2+ via 2-rhodaoxetane [3a]+, provides a new route for the amidation of a [RhI(ethene)] fragment.     

Crystal and molecular structures of new fullerides, (Ph4P)2C60Hal (Hal=Br or I) and (Ph4As)2C60Cl

New air-stable fullerides, (Ph₄P)₂C₆₀Hal (Hal=Br or I) and (Ph₄As)₂C₆₀Cl, were synthesized, and their crystal structure were determined. A comparative crystal-chemical analysis of the fullerides under study demonstrated that they are isostructural, described by the general formula (Ph₄X)₂C₆₀Hal (X=P or As, and Hal=Cl, Br, or I), and crystallize in the triclinic system. The C₆₀ ⁻ and Hal⁻ anions occupy special centrosymmetric positions. The (Ph₄P)⁺ and (Ph₄As)⁺ cations occupy general positions. The principal parameters of the molecular structures are reported. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1982–1986, November, 1997.     

Anion recognition of chloride and bromide by a rigid dicobalt(II) cryptate

The crystal structures of [Co 2L(Cl)](ClO 4) 3 ( 1), [Co 2L(Br)](ClO 4) 3 ( 2), [Co 2L(OH)(OH 2)]I 3 ( 3), and [Co 2L (1)(Cl)](ClO 4) 3 ( 4), the density functional theory calculations, as well as the binding constants of [Co 2L] (4+) toward Cl (-) and Br (-) and of [Co 2L (1)] (4+) toward Cl (-), are reported in this paper (L = N[(CH 2) 2NHCH 2(C 6H 4- p)CH 2NH(CH 2) 2] 3N, L (1) = N[(CH 2) 2NHCH 2(C 6H 4- m)CH 2NH(CH 2) 2] 3N). The rigid dicobalt(II) cryptate [Co 2L] (4+) shows the recognition of Cl (-) and Br (-) but not of F (-) and I (-), because of the size matching to its rigid cavity. We also found that the relative rigid tripodal skeleton of L than that of L (1) results in the higher affinity of [Co 2L] (4+) toward Cl (-). Magnetic susceptibility measurements of 1 and 2 indicate that the two Co(II) atoms in the cryptates are antiferromagnetically coupled through the Cl (-)/Br (-) bridge, with g = 2.19, J = -13.7 cm (-1) for 1, and g = 2.22, J = -17.1 cm (-1) for 2.     

Synthesis and Crystal Structure of Complex [Cdq3] [Cd（qH）3]（ClO4）CH3OH（q = 8-Quinolinolate, qH = 8-Quilinolinol）

1 INTRODUCTION 8-Quinolinolate is a very useful ligand and used to synthesize many complexes with special physical properties. For example, the complex tris(8-quinoli- nolate)aluminum(III) displays distinguished physical property in the area of electroluminescence ma- terials[1]. Based on tris(8-quinolinolate)aluminum(III), high-luminance low-voltage driven devices have been made, which opens the route to design low-cost large area displays and illuminators. The crystals thatcontain com…     

Crystal structure of CF3I(Cl)F

In addition to CF3IF2 and CF3ICl2, CF3I(Cl)F is the only known example of the (trifluoromethyl)iodine dihalides. CF3I(Cl)F is even at low temperatures not stable in solution and decomposes by symmetrization. It crystallizes in the orthorhombic space group Cmca with a = 6.898(1) A, b = 7.310(1) A, c = 20.127(1) A and eight formula units per unit cell. The final R indices [I > 2 sigma(I)] are R1 = 0.0372 and wR2 = 0.0981.     

(Ph)3PBr][Br7], [(Bz)(Ph)3P]2[Br8], [(n-Bu)3MeN]2[Br20], [C4MPyr]2[Br20], and [(Ph)3PCl]2[Cl2I14]: extending the horizon of polyhalides via synthesis in ionic liquids

The five polyhalides [(Ph)(3)PBr][Br(7)], [(Bz)(Ph)(3)P](2)[Br(8)], [(n-Bu)(3)MeN](2)[Br(20)], [C(4)MPyr](2)[Br(20)] ([C(4)MPyr] = N-butyl-N-methylpyrrolidinium), and [(Ph)(3)PCl](2)[Cl(2)I(14)] were prepared by the reaction of dibromine and iodine monochloride in ionic liquids. The compounds [(Ph)(3)PBr][Br(7)] and [(Bz)(Ph)(3)P](2)[Br(8)] contain discrete pyramidal [Br(7)](-) and Z-shaped [Br(8)](2-) polybromide anions. [(n-Bu)(3)MeN](2)[Br(20)] and [C(4)MPyr](2)[Br(20)] exhibit new infinite two- and three-dimensional polybromide networks and contain the highest percentage of dibromine ever observed in a compound. [(Ph)(3)PCl](2)[Cl(2)I(14)] also consists of a three-dimensional network and is the first example of an infinite polyiodine chloride. All compounds were obtained from ionic liquids as the solvent that, on the one hand, guarantees for a high stability against strongly oxidizing Br(2) and ICl and that, on the other hand, reduces the high volatility of the molecular halogens.     

Tris(trifluoromethyl)borane Adducts of Cyanogen Halides

The reactivity of carbonyl‐tris(trifluoromethyl)borane (CF₃)₃BCO against the homologous series of cyanogen (pseudo)halides NCX, X = F, Cl, Br, I, CN, was investigated. Lewis acid‐base adducts (CF₃)₃BNCX were obtained for X = Cl, Br, I, CN and were characterized by vibrational and NMR spectroscopy. It appeared that FCN did not react and twofold complexation of NCCN does not occur, in agreement with theoretical complexation energies and QTAIM charges.