Isolation, observation, and computational modeling of proposed intermediates in catalytic proton reductions with the hydrogenase mimic Fe2(CO)6S2C6H4

Proposed electrocatalytic proton reduction intermediates of hydrogenase mimics were synthesized, observed, and studied computationally. A new mechanism for H(2) generation appears to involve Fe(2)(CO)(6)(1,2-S(2)C(6)H(4)) (3), the dianions {[1,2-S(2)C(6)H(4)][Fe(CO)(3)(μ-CO)Fe(CO)(2)](2-) (3(2-)), the bridging hydride {[1,2-S(2)C(6)H(4)][Fe(CO)(3)(μ-CO)(μ-H)Fe(CO)(2)]}(-), 3H(-)(bridging), and the terminal hydride 3H(-)(term-stag), {[1,2-S(2)C(6)H(4)][HFe(CO)(3)Fe(CO)(3)]}(-), as intermediates. The dimeric sodium derivative of 3(2-), {[Na(2)(THF)(OEt(2))(3)][3(2-)]}(2) (4) was isolated from reaction of Fe(2)(CO)(6)(1,2-S(2)C(6)H(4)) (3) with excess sodium and was characterized by X-ray crystallography. It possesses a bridging CO and an unsymmetrically bridging dithiolate ligand. Complex 4 reacts with 4 equiv. of triflic or benzoic acid (2 equiv. per Fe center) to generate H(2) and 3 in 75% and 60% yields, respectively. Reaction of 4 with 2 equiv. of benzoic acid generated two hydrides in a 1.7 : 1 ratio (by (1)H NMR spectroscopy). Chemical shift calculations on geometry optimized structures of possible hydride isomers strongly suggest that the main product, 3H(-)(bridging), possesses a bridging hydride ligand, while the minor product is a terminal hydride, 3H(-)(term-stag). Computational studies support a catalytic proton reduction mechanism involving a two-electron reduction of 3 that severs an Fe-S bond to generate a dangling thiolate and an electron rich Fe center. The latter iron center is the initial site of protonation, and this event is followed by protonation at the dangling thiolate to give the thiol thiolate [Fe(2)H(CO)(6)(1,2-SHSC(6)H(4))]. This species then undergoes an intramolecular acid-base reaction to form a dihydrogen complex that loses H(2) and regenerates 3.     

Conversion of alkynes to cyclic imides and anhydrides using reactive iron carbonyls prepared from Fe(CO)5 and Fe3(CO)12

Alkyne-iron carbonyl complexes, prepared using Fe(CO)₅-NaBH₄-CH₃COOH-amine-alkyne and Fe₃(CO)₁₂-amine-alkyne reagent systems, react with excess of amine at 25 °C to give cyclic imides in moderate to good yields. Further, unsaturated iron carbonyl species, prepared using the Fe(CO)₅-pyridine-N-oxide system, react with alkynes to give the corresponding anhydrides.     

Precursors to [FeFe]-hydrogenase models: syntheses of Fe2(SR)2(CO)6 from CO-free iron sources

This report describes routes to iron dithiolato carbonyls that do not require preformed iron carbonyls. The reaction of FeCl 2, Zn, and Q 2S 2C n H 2 n (Q (+) = Na (+), Et 3NH (+)) under an atmosphere of CO affords Fe 2(S 2C n H 2 n )(CO) 6 ( n = 2, 3) in yields >70%. The method was employed to prepare Fe 2(S 2C 2H 4)( (13)CO) 6. Treatment of these carbonylated mixtures with tertiary phosphines, instead of Zn, gave the ferrous species Fe 3(S 2C 3H 6) 3(CO) 4(PR 3) 2, for R = Et, Bu, and Ph. Like the related complex Fe 3(SPh) 6(CO) 6, these compounds consist of a linear arrangement of three conjoined face-shared octahedral centers. Omitting the phosphine but with an excess of dithiolate, we obtained the related mixed-valence triiron species [Fe 3(S 2C n H 2 n ) 4(CO) 4] (-). The highly reducing all-ferrous species [Fe 3(S 2C n H 2 n ) 4(CO) 4] (2-) is implicated as an intermediate in this transformation. Reactive forms of iron, prepared by the method of Rieke, also combined with dithiols under a CO atmosphere to give Fe 2(S 2C n H 2 n )(CO) 6 in modest yields under mild conditions. Studies on the order of addition indicate that ferrous thiolates are formed prior to the onset of carbonylation. Crystallographic characterization demonstrated that the complexes Fe 3(S 2C 3H 6) 3(CO) 4(PEt 3) 2 and PBnPh 3[Fe 3(S 2C 3H 6) 4(CO) 4] feature high-spin ferrous and low-spin ferric as the central metal, respectively.     

Synthesis and Chemical and Electrochemical Characterization of Fe-S Carbonyl Clusters. X-ray Crystal Structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)

A reinvestigation of the redox behavior of the [Fe(3)(&mgr;(3)-S)(CO)(9)](2)(-) dianion led to the isolation and characterization of the new [Fe(5)S(2)(CO)(14)](2)(-), as well as the known [Fe(6)S(6)(CO)(12)](2)(-) dianion. As a corollary, new syntheses of the [Fe(3)S(CO)(9)](2)(-) dianion are also reported. The [Fe(5)S(2)(CO)(14)](2)(-) dianion has been obtained by oxidative condensation of [Fe(3)S(CO)(9)](2)(-) induced by tropylium and Ag(I) salts or SCl(2), or more straightforwardly through the reaction of [Fe(4)(CO)(13)](2)(-) with SCl(2). The [Fe(6)S(6)(CO)(12)](2)(-) dianion has been isolated as a byproduct of the synthesis of [Fe(3)S(CO)(9)](2)(-) and [Fe(5)S(2)(CO)(14)](2)(-) or by reaction of [Fe(4)(CO)(13)](2)(-) with elemental sulfur. The structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)] were determined by single-crystal X-ray diffraction analyses. Crystal data: for [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)], monoclinic, space group P2(1)/c (No. 14), a = 24.060(5), b = 14.355(6), c = 23.898(13) ?, beta = 90.42(3) degrees, Z = 4; for [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)], monoclinic, space group C2/c (No. 15), a = 34.424(4), b = 14.081(2), c = 19.674(2) ?, beta = 115.72(1) degrees, Z = 4. The new [Fe(5)S(2)(CO)(14)](2)(-) dianion shows a "bow tie" arrangement of the five metal atoms. The two Fe(3) triangles sharing the central Fe atom are not coplanar and show a dihedral angle of 55.08(3) degrees. Each Fe(3) moiety is capped by a triply bridging sulfide ligand. The 14 carbonyl groups are all terminal; two are bonded to the unique central atom and three to each peripheral iron atom. Protonation of the [Fe(5)S(2)(CO)(14)](2)(-) dianion gives reversibly rise to the corresponding [HFe(5)S(2)(CO)(14)](-) monohydride derivative, which shows an (1)H-NMR signal at delta -21.7 ppm. Its further protonation results in decomposition to mixtures of Fe(2)S(2)(CO)(6) and Fe(3)S(2)(CO)(9), rather than formation of the expected H(2)Fe(5)S(2)(CO)(14) dihydride. Exhaustive reduction of [Fe(5)S(2)(CO)(14)](2)(-) with sodium diphenyl ketyl progressively leads to fragmentation into [Fe(3)S(CO)(9)](2)(-) and [Fe(CO)(4)](2)(-), whereas electrochemical, as well as chemical oxidation with silver or tropylium tetrafluoroborate, in dichloromethane, generates the corresponding [Fe(5)S(2)(CO)(14)](-) radical anion which exhibits an ESR signal at g = 2.067 at 200 K. The electrochemical studies also indicated the existence of a subsequent one-electron anodic oxidation which possesses features of chemical reversibility in dichloromethane but not in acetonitrile solution. A reexamination of the electrochemical behavior of the [Fe(3)S(CO)(9)](2)(-) dianion coupled with ESR monitoring enabled the spectroscopic characterization of the [Fe(3)S(CO)(9)](-) radical monoanion and demonstrated its direct involvement in the generation of the [Fe(5)S(2)(CO)(14)](n)()(-) (n = 0, 1, 2) system.     

Iron Sulfido Derivatives of the Fullerenes C(60) and C(70)

Toluene solutions of C(60) react upon UV irradiation with Fe(2)S(2)(CO)(6) to give C(60)[S(2)Fe(2)(CO)(6)](n)() where n = 1-6. C(60)[S(2)Fe(2)(CO)(6)](n)() where n = 1-3 have been isolated and characterized. Crystallographic studies of C(60)S(2)Fe(2)(CO)(6) show that the S-S bond of the Fe(2) reagent is cleaved to give a dithiolate with idealized C(2)(v)() symmetry. The addition occurred at a 6,6 fusion, and the metrical details show that the Fe(2) portion of the molecule resembles C(2)H(4)S(2)Fe(2)(CO)(6). IR spectroscopic measurements indicate that the Fe(2)(CO)(6) subunits in the multiple-addition species (n > 1) interact only weakly. UV-vis spectra of the adducts show a shift to shorter wavelength with addition of each S(2)Fe(2)(CO)(6) unit. Photoaddition of the phosphine complex Fe(2)S(2)(CO)(5)(PPh(3)) to C(60) gave C(60)[S(2)Fe(2)(CO)(5)(PPh(3))](n)(), where n = 1-3. (31)P{(1)H} NMR studies show that the double adduct consists of multiple isomers. Photoaddition of Fe(2)S(2)(CO)(6) to C(70) gave a series of adducts C(70)[S(2)Fe(2)(CO)(6)](n)() where n = 1-4. HPLC analyses show one, four, and three isomers for the adducts, respectively.     

A highly efficient one-pot reaction of 2-(gem-dibromovinyl)phenols(thiophenols) with K4Fe(CN)6 to 2-cyanobenzofurans(thiophenes)

2-Cyanobenzofurans and 2-cyanobenzothiophenes were prepared through an efficient one-pot Ullmann-reaction/cyanation reaction. In the presence of CuI/Na(2)CO(3)-Pd(OAc)(2)/PPh(3) in DMF, the reaction of 2-(gem-dibromovinyl)phenols and 2-(gem-dibromovinyl)thiophenols with K(4)Fe(CN)(6), as non-toxic and user-friendly cyanating reagent, proceeded smoothly to generate the corresponding 2-cyanobenzofurans and 2-cyanobenzothiophenes in good yields.     

Synthetic and structural studies on [Fe2(SR)2(CN)x(CO)6-x](x-) as active site models for Fe-only hydrogenases.

A series of models for the active site (H-cluster) of the iron-only hydrogenase enzymes (Fe-only H2-ases) were prepared. Treatment of MeCN solutions of Fe2(SR)2(CO)6 with 2 equiv of Et4NCN gave [Fe2(SR)2(CN)2(CO)4](2-) compounds. IR spectra of the dicyanides feature four nu(CO) bands between 1965 and 1870 cm(-1) and two nu(CN) bands at 2077 and 2033 cm(-1). For alkyl derivatives, both diequatorial and axial-equatorial isomers were observed by NMR analysis. Also prepared were a series of dithiolate derivatives (Et4N)2[Fe2(SR)2(CN)2(CO)4], where (SR)2 = S(CH2)2S, S(CH2)3S. Reaction of Et4NCN with Fe2(S-t-Bu)2(CO)6 gave initially [Fe2(S-t-Bu)2(CN)2(CO)4](2-), which comproportionated to give [Fe2(S-t-Bu)2(CN)(CO)5](-). The mechanism of the CN(-)-for-CO substitution was probed as follows: (i) excess CN(-) with a 1:1 mixture of Fe2(SMe)2(CO)6 and Fe2(SC6H4Me)2(CO)6 gave no mixed thiolates, (ii) treatment of Fe2(S2C3H6)(CO)6 with Me3NO followed by Et4NCN gave (Et4N)[Fe2(S2C3H6)(CN)(CO)5], which is a well-behaved salt, (iii) treatment of Fe2(S2C3H6)(CO)6 with Et4NCN in the presence of excess PMe3 gave (Et4N)[Fe2(S2C3H6)(CN)(CO)4(PMe3)] much more rapidly than the reaction of PMe3 with (Et4N)[Fe2(S2C3H6)(CN)(CO)5], and (iv) a competition experiment showed that Et4NCN reacts with Fe2(S2C3H6)(CO)6 more rapidly than with (Et4N)[Fe2(S2C3H6)(CN)(CO)5]. Salts of [Fe2(SR)2(CN)2(CO)4](2-) (for (SR)2 = (SMe)2 and S2C2H4) and the monocyanides [Fe2(S2C3H6)(CN)(CO)5](-) and [Fe2(S-t-Bu)2(CN)(CO)5](-) were characterized crystallographically; in each case, the Fe-CO distances were approximately 10% shorter than the Fe-CN distances. The oxidation potentials for Fe2(S2C3H6)(CO)4L2 become milder for L = CO, followed by MeNC, PMe3, and CN(-); the range is approximately 1.3 V. In water,oxidation of [Fe2(S2C3H6)(CN)2(CO)4](2-) occurs irreversibly at -0.12 V (Ag/AgCl) and is coupled to a second oxidation.     

Synthesis and Characterization of nido-[1,1,2,2-(CO)(4)-1,2-(PPh(3))(2)-1,2-FeIrB(2)H(5)]: A Heterobimetallaborane Analogue of nido-[B(4)H(7)](-)

The synthesis and characterization of nido-[1,1,2,2-(CO)(4)-1,2-(PPh(3))(2)-1,2-FeIrB(2)H(5)] (1) is reported. 1 is formed in low yield as a degradation product from the reaction between [{&mgr;-Fe(CO)(4)}B(6)H(9)](-) and trans-Ir(CO)Cl(PPh(3))(2) in THF and is characterized from NMR, IR, and analytical data and by a single-crystal X-ray diffraction study. 1 crystallizes in the monoclinic space group P2(1)/n with a = 12.8622(12), b = 14.3313(12), c = 23.579(3) ?, beta = 97.12(2) degrees, Z = 4, V = 4257.0(8) ?(3), R(1) = 4.83%, and wR(2)()(F(2)) = 12.43%. The heterobimetallaborane structure may be viewed as a derivative of the binary boron hydride nido-[B(4)H(7)](-) and is related to the known homobimetallatetraborane analogues [Fe(2)(CO)(6)B(2)H(6)] and [Co(2)(CO)(6)B(2)H(4)]. 1 exhibits proton fluxionality in its (1)H NMR spectrum, which is related to that found in the latter two compounds.     

Theoretical study of the gas-phase Fe(CO)5 catalyzed water gas shift reaction: a new mechanism proposed

A novel mechanism for the gas-phase Fe(CO)(5) and base catalyzed water gas shift reaction has been examined. The reaction pathway described here is predicted at the B3LYP/6-31++G(d,p) level to be energetically competitive with the classic mechanism. The reaction path explored here involves the energetically barrierless formation of (CO)(4)FeCOOH(-) (the catalyst of the system) decarboxylation induced by the addition of CO to give (CO)(4)FeCHO, and evolution of H(2) upon addition of H(2)O to the (CO)(4)FeCHO intermediate. The energetic barriers predicted for the last two steps are 21.2 and 42.0 kcal/mol, respectively, using the B3LYP method.     

A simple and convenient method for the synthesis of cyclobutenediones from alkynes using new Fe(CO)5/NaH/MeI reagent system

Iron carbonyl complexes prepared in situ using the Fe(CO)₅/NaH/MeI reagent combination and alkynes at 25 °C give the corresponding cyclobutenediones in 50-65% yields after CuCl₂ · 2H₂O oxidation.     

CO-migration in the ligand substitution process of the chelating diphosphite diiron complex (mu-pdt)[Fe(CO)3][Fe(CO){(EtO)2PN(Me)P(OEt)2}

Selective synthetic routes to isomeric diiron dithiolate complexes containing the (EtO) 2PN(Me)P(OEt) 2 (PNP) ligand in an unsymmetrical chelating role, for example, (mu-pdt)[Fe(CO) 3][Fe(CO)(kappa (2)-PNP)] ( 3) and as a symmetrically bridging ligand in (mu-pdt)(mu-PNP)[Fe(CO) 2] 2 ( 4), have been developed. 3 was converted to 4 in 75% yield after extensive reflux in toluene. The reactions of 3 with PMe 3 and P(OEt) 3 afforded bis-monodentate P-donor complexes (mu-pdt)[Fe(CO) 2PR 3][Fe(CO) 2(PNP)] (PR 3 = PMe 3, 5; P(OEt) 3, 7), respectively, which are formed via an associative PMe 3 coordination reaction followed by an intramolecular CO-migration process from the Fe(CO) 3 to the Fe(CO)(PNP) unit with concomitant opening of the Fe-PNP chelate ring. The PNP-monodentate complexes 5 and 7 were converted to a trisubstituted diiron complex (mu-pdt)(mu-PNP)[Fe(CO)PR 3][Fe(CO) 2] (PR 3 = PMe 3, 6; P(OEt) 3, 8) on release of 1 equiv CO when refluxing in toluene. Variable-temperature (31)P NMR spectra show that trisubstituted diiron complexes each exist as two configuration isomers in solution. All diiron dithiolate complexes obtained were characterized by MS, IR, NMR spectroscopy, elemental analysis, and X-ray diffraction studies.     

Unraveling the photochemistry of Fe(CO)5 in solution: observation of Fe(CO)3 and the conversion between 3Fe(CO)4 and 1Fe(CO)4(Solvent)

The photochemistry of Fe(CO)5 (5) has been studied in heptane, supercritical (sc) Ar, scXe, and scCH4 using time-resolved infrared spectroscopy (TRIR). 3Fe(CO)4 ((3)4) and Fe(CO)3(solvent) (3) are formed as primary photoproducts within the first few picoseconds. Complex 3 is formed via a single-photon process. In heptane, scCH4, and scXe, (3)4 decays to form (1)4 x L (L = heptane, CH4, or Xe) as well as reacting with 5 to form Fe2(CO)9. In heptane, 3 reacts with CO to form (1)4 x L. The conversion of (3)4 to (1)4 x L has been monitored directly for the first time (L = heptane, kobs = 7.8(+/- 0.3) x 10(7) s(-1); scCH4, 5(+/- 1) x 10(6) s(-1); scXe, 2.1(+/- 0.1) x 10(7) s(-1)). In scAr, (3)4 and 3 react with CO to form 5 and (3)4, respectively. We have determined the rate constant (kCO = 1.2 x 10(7) dm3 mol(-1) s(-1)) for the reaction of (3)4 with CO in scAr, and this is very similar to the value obtained previously in the gas phase. Doping the scAr with either Xe or CH4 resulted in (3)4 reacting with Xe or CH4 to form (1)4 x Xe or (1)4 x CH4. The relative yield, [(3)4]:[3] decreases in the order heptane > scXe > scCH4 > scAr, and pressure-dependent measurements in scAr and scCH4 indicate an influence of the solvent density on this ratio.     

A new reaction of [Cp((CO)2Fe(PPh2H)]PF6 with NaBH4 to give Cp(CO)(H)Fe(PPh2H) via Cp(CO)2FeH and PPh2H

[Cp((CO)₂Fe(PPh₂H)]PF₆ reacts with NaBH₄ to give the intermediates CpFe(CO)₂H and PPh₂H, which are then converted into Cp(CO)(H)Fe(PPh₂H). [Cp(CO)₂FeL]PF₆ (L = P(OMe)₃, P(OEt)₃ and P(OⁱPr)₃) reacts with NaBH₄ to give the product Cp(CO)(H)FeL directly without Cp(CO)₂FeH and L even being formed transiently. The proposed reaction mechanism is that H⁻ attacks th phosphorus atom to give a metallaphosphorane complex, followed by coupling between a Cp(CO)₂Fe fragment and H on the hypervalent phosphorus.     

The reactions of [Fe(CO)5-n(CNAr)n] (n = 1 or 2; Ar = aryl) with dicyclopentadiene

Although [Fe(CO)₃(CNAr)₂] complexes fail to react with dicyclopentadiene at 140°C, under the same conditions [Fe(CO)₄(CNAr)] complexes give high yields of [Fe₂(η-C₅H₅(CO)₃(CNAr)] and [Fe₂(η-C₅H₅)₂(CO)₂-(CNAr)₂], with the product ratios depending very much on the aryl group (Ar).     

Formation and chemical reactivities of a new type of double-butterfly [[Fe2(mu-CO)(CO)6]2(mu-SZS-mu)]2-: synthetic and structural studies on novel linear and macrocyclic butterfly Fe/E (E=S,Se) cluster complexes

A new type of double-butterfly [[Fe(2)(mu-CO)(CO)(6)](2)(mu-SZS-mu)](2-) (3), a dianion that has two mu-CO ligands, has been synthesized from dithiol HSZSH (Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)), [Fe(3)(CO)(12)], and Et(3)N in a molar ratio of 1:2:2 at room temperature. Interestingly, the in situ reactions of dianions 3 with various electrophiles affords a series of novel linear and macrocyclic butterfly Fe/E (E=S, Se) cluster complexes. For instance, while reactions of 3 with PhC(O)Cl and Ph(2)PCl give linear clusters [[Fe(2)(mu-PhCO)(CO)(6)](2)(mu-SZS-mu)] (4 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)) and [[Fe(2)(mu-Ph(2)P)(CO)(6)](2)(mu-SZS-mu)] (5 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)), reactions with CS(2) followed by treatment with monohalides RX or dihalides X-Y-X give both linear clusters [[Fe(2)(mu-RCS(2))(CO)(6)](2)(mu-SZS-mu)] (6 a-e: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2), FeCp(CO)(2)) and macrocyclic clusters [[Fe(2)(CO)(6)](2)(mu-SZS-mu)(mu-CS(2)YCS(2)-mu)] (7 a-e: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2); Y=(CH(2))(2-4), 1,3,5-Me(CH(2))(2)C(6)H(3), 1,4-(CH(2))(2)C(6)H(4)). In addition, reactions of dianions 3 with [Fe(2)(mu-S(2))(CO)(6)] followed by treatment with RX or X-Y-X give linear clusters [[[Fe(2)(CO)(6)](2)(mu-RS)(mu(4)-S)](2)(mu-SZS-mu)] (8 a-c: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2)) and macrocyclic clusters [[[Fe(2)(CO)(6)](2)(mu(4)-S)](2)(mu-SYS-mu)(mu-SZS-mu)] (9 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2); Y=(CH(2))(4)), and reactions with SeCl(2) afford macrocycles [[Fe(2)(CO)(6)](2)(mu(4)-Se)(mu-SZS-mu)] (10 d: Z=CH(2)(CH(2)OCH(2))(3)CH(2)) and [[[Fe(2)(CO)(6)](2)(mu(4)-Se)](2)(mu-SZS-mu)(2)] (11 a-d: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)). Production pathways have been suggested; these involve initial nucleophilic attacks by the Fe-centered dianions 3 at the corresponding electrophiles. All the products are new and have been characterized by combustion analysis and spectroscopy, and by X-ray diffraction techniques for 6 c, 7 d, 9 b, 10 d, and 11 c in particular. X-ray diffraction analyses revealed that the double-butterfly cluster core Fe(4)S(2)Se in 10 d is severely distorted in comparison to that in 11 c. In view of the Z chains in 10 a-c being shorter than the chain in 10 d, the double cluster core Fe(4)S(2)Se in 10 a-c would be expected to be even more severely distorted, a possible reason for why 10 a-c could not be formed.     

Atomic alignment effect in the dissociative energy transfer reaction of metal carbonyls (Fe(CO)5, Ni(CO)4) with oriented Ar (3P2, M(J) = 2)

The atomic alignment effect has been studied for the dissociative energy transfer reaction of metal carbonyls (Fe(CO)(5), Ni(CO)(4)) with the oriented Ar ((3)P(2), M(J) = 2). The emission intensity from the excited metal products (Fe*, Ni*) has been measured as a function of the atomic alignment in the collision frame. The selectivity of the atomic orbital alignment of Ar ((3)P(2), M(J) = 2) (rank 2 moment, a(2)) is found to be opposite for the two reaction systems; the Fe(CO)(5) reaction is favorable at the Π configuration (positive a(2)), while the Ni(CO)(4) reaction is favorable at the Σ configuration (negative a(2)). Moreover, a significant spin alignment effect (rank 4 moment, a(4)) is recognized only in the Ni(CO)(4) reaction. The atomic alignment effect turns out to be essentially different between the two reaction systems; the Fe(CO)(5) reaction is controlled by the configuration of the half-filled 3p atomic orbital of Ar ((3)P(2)) in the collision frame (L dependence), whereas the Ni(CO)(4) reaction is controlled by the configuration of the total angular moment J (including spin) of Ar ((3)P(2)) in the collision frame (J dependence). As the origin of J dependence observed only in the Ni(CO)(4) reaction, the correlation (and/or the interference) between two electron exchange processes via the electron rearrangements is proposed.     

Fe(CO)5多光子解离和电离动力学

Multiphoton dissociation-ionization dynamics of Fe(CO)_5 were studied mass spectrometrically with a molecular beam and XeCl excimer laser. The results show that Fe(CO)_n~+ (n= 1,2,… ,5) and Fe_2(CO)_4~+ ions are formed mainly via ion-molecule reaction between Fe~+ and Fe(CO)_5 and dissociation following. A “ladder” model of Fe(CO)_5 photodissociation is presented in the paper.     

Six-coordinate and five-coordinate Fe(II)(CN)(2)(CO)(x) thiolate complexes (x = 1, 2): synthetic advances for iron sites of [NiFe] hydrogenases

The dicyanodicarbonyliron(II) thiolate complexes trans,cis-[(CN)(2)(CO)(2)Fe(S,S-C-R)](-) (R = OEt (2), N(Et)(2) (3)) were prepared by the reaction of [Na][S-C(S)-R] and [Fe(CN)(2)(CO)(3)(Br)](-) (1). Complex 1 was obtained from oxidative addition of cyanogen bromide to [Fe(CN)(CO)(4)](-). In a similar fashion, reaction of complex 1 with [Na][S,O-C(5)H(4)N], and [Na][S,N-C(5)H(4)] produced the six-coordinate trans,cis-[(CN)(2)(CO)(2)Fe(S,O-C(5)H(4)N)](-) (6) and trans,cis-[(CN)(2)(CO)(2)Fe(S,N-C(5)H(4))](-) (7) individually. Photolysis of tetrahydrofuran (THF) solution of complexes 2, 3, and 7 under CO led to formation of the coordinatively unsaturated iron(II) dicyanocarbonyl thiolate compounds [(CN)(2)(CO)Fe(S,S-C-R)](-) (R = OEt (4), N(Et)(2) (5)) and [(CN)(2)(CO)Fe(S,N-C(5)H(4))](-) (8), respectively. The IR v(CN) stretching frequencies and patterns of complexes 4, 5, and 8 have unambiguously identified two CN(-) ligands occupying cis positions. In addition, density functional theory calculations suggest that the architecture of five-coordinate complexes 4, 5, and 8 with a vacant site trans to the CO ligand and two CN(-) ligands occupying cis positions serves as a conformational preference. Complexes 2, 3, and 7 were reobtained when the THF solution of complexes 4, 5, and 8 were exposed to CO atmosphere at 25 degrees C individually. Obviously, CO ligand can be reversibly bound to the Fe(II) site in these model compounds. Isotopic shift experiments demonstrated the lability of carbonyl ligands of complexes 2, 3, 4, 5, 7, and 8. Complexes [(CN)(2)(CO)Fe(S,S-C-R)](-) and NiA/NiC states [NiFe] hydrogenases from D. gigas exhibit a similar one-band pattern in the v(CO) region and two-band pattern in the v(CN) region individually, but in different positions, which may be accounted for by the distinct electronic effects between [S,S-C-R](-) and cysteine ligands. Also, the facile formations of five-coordinate complexes 4, 5, and 8 imply that the strong sigma-donor, weak pi-acceptor CN(-) ligands play a key role in creating/stabilizing five-coordinate iron(II) [(CN)(2)(CO)Fe(S,S-C-R)](-) complexes with a vacant coordination site trans to the CO ligand.     

Isolation of (CO)1- and (CO2)1- radical complexes of rare earths via Ln(NR2)3/K reduction and [K2(18-crown-6)2]2+ oligomerization

Deep-blue solutions of Y(2+) formed from Y(NR(2))(3) (R = SiMe(3)) and excess potassium in the presence of 18-crown-6 at -45 °C under vacuum in diethyl ether react with CO at -78 °C to form colorless crystals of the (CO)(1-) radical complex, {[(R(2)N)(3)Y(μ-CO)(2)][K(2)(18-crown-6)(2)]}(n), 1. The polymeric structure contains trigonal bipyramidal [(R(2)N)(3)Y(μ-CO)(2)](2-) units with axial (CO)(1-) ligands linked by [K(2)(18-crown-6)(2)](2+) dications. Byproducts such as the ynediolate, [(R(2)N)(3)Y](2)(μ-OC≡CO){[K(18-crown-6)](2)(18-crown-6)}, 2, in which two (CO)(1-) anions are coupled to form (OC≡CO)(2-), and the insertion/rearrangement product, {(R(2)N)(2)Y[OC(═CH(2))Si(Me(2))NSiMe(3)]}[K(18-crown-6)], 3, are common in these reactions that give variable results depending on the specific reaction conditions. The CO reduction in the presence of THF forms a solvated variant of 2, the ynediolate [(R(2)N)(3)Y](2)(μ-OC≡CO)[K(18-crown-6)(THF)(2)](2), 2a. CO(2) reacts analogously with Y(2+) to form the (CO(2))(1-) radical complex, {[(R(2)N)(3)Y(μ-CO(2))(2)][K(2)(18-crown-6)(2)]}(n), 4, that has a structure similar to that of 1. Analogous (CO)(1-) and (OC≡CO)(2-) complexes of lutetium were isolated using Lu(NR(2))(3)/K/18-crown-6: {[(R(2)N)(3)Lu(μ-CO)(2)][K(2)(18-crown-6)(2)]}(n), 5, [(R(2)N)(3)Lu](2)(μ-OC≡CO){[K(18-crown-6)](2)(18-crown-6)}, 6, and [(R(2)N)(3)Lu](2)(μ-OC≡CO)[K(18-crown-6)(Et(2)O)(2)](2), 6a.     

Reactivity of a sterically hindered Fe(II) thiolate dimer with amines and hydrazines

The sterically hindered Fe(II) thiolate dimer Fe(2)(mu-STriph)(2)(STriph)(2) (1; [STriph](-) = 2,4,6-triphenylbenzenethiolate) reacts with primary amines ((t)BuNH(2), aniline) and N(2)H(4) to form the structurally characterized addition complexes Fe(STriph)(2)(NH(2)(t)Bu)(2), Fe(2)(mu-STriph)(2)(STriph)(2)(NH(2)Ph)(2), and Fe(2)(mu-eta(1):eta(1)-N(2)H(4))(2)(N(2)H(4))(4)(STriph)(4) in high yield. Chemical and NMR spectroscopic evidence indicate that the binding of these nitrogen donors is labile in solution and multispecies equilibria are likely. With arylhydrazines, 1 catalytically disproportionates 1,2-diphenylhydrazine to aniline and azobenzene, and it rearranges 1-methyl-1,2-diarylhydrazines to give, after treatment with alumina, mononuclear, trigonal bipyramidal Fe(III) complexes of composition Fe(ISQ)(2)(STriph), where [ISQ](-) denotes an appropriately substituted bidentate o-diiminobenzosemiquinonate ligand. Complex 1 shows no reaction with hindered 1,2-dialkylhydrazines (isopropyl or tert-butyl) or tetrasubstituted 1,2-dimethyl-1,2-diphenylhydrazine.