Electrocatalytic oxygen evolution from water on a Mn(III-V) dimer model catalyst--a DFT perspective

A complete water oxidation and oxygen evolution reaction (OER) cycle is monitored by means of density functional theory (DFT). A biomimetic model catalyst, comprising a μ-OH bridged Mn(III-V) dimer truncated by acetylacetonate ligand analogs and hydroxides is employed. The reaction cycle is divided into four electrochemical hydrogen abstraction steps followed by a series of chemical steps. The former employ the tyrosine/tyrosyl redox couple acting as electron and proton sink, thus determining the reference potential. Stripping hydrogen from water leads to the formation of two highly unstable Mn(V)=O/Mn(IV)-O˙ moieties, which subsequently combine to form a μ-peroxy O-O bond. O(2) evolution results from subsequent consecutive replacement of the remaining Mn-O bonds by water. A Zener "spintronic" type mechanism for virtually barrierless O(2) evolution is found. The applicability of DFT is discussed and extended to include the rate-limiting steps in the OER. Rather than attempting to compute transition states where KS-DFT is unreliable, an upper bound for the activation barrier of the O-O bond formation step is estimated from the hessians of the relevant intermediates.     

Electronic structure of the water oxidation catalyst cis,cis-[(bpy)2(H2O)Ru(III)ORu(III)(OH2)(bpy)2]4+, the blue dimer

The first designed molecular catalyst for water oxidation is the "blue dimer", cis,cis-[(bpy)(2)(H(2)O)Ru(III)ORu(III)(OH(2))(bpy)(2)](4+). Although there is experimental evidence for extensive electronic coupling across the μ-oxo bridge, results of earlier DFT and CASSCF calculations provide a model with magnetic interactions of weak to moderately coupled Ru(III) ions across the μ-oxo bridge. We present the results of a comprehensive experimental investigation, combined with DFT calculations. The experiments demonstrate both that there is strong electronic coupling in the blue dimer and that its effects are profound. Experimental evidence has been obtained from molecular structures and key bond distances by XRD, electrochemically measured comproportionation constants for mixed-valence equilibria, temperature-dependent magnetism, chemical properties (solvent exchange, redox potentials, and pK(a) values), XPS binding energies, analysis of excitation-dependent resonance Raman profiles, and DFT analysis of electronic absorption spectra. The spectrum can be assigned based on a singlet ground state with specific hydrogen-bonding interactions with solvent molecules included. The results are in good agreement with available experimental data. The DFT analysis provides assignments for characteristic absorption bands in the near-IR and visible regions. Bridge-based dπ → dπ* and interconfiguration transitions at Ru(III) appear in the near-IR and MLCT and LMCT transitions in the visible. Reasonable values are also provided by DFT analysis for experimentally observed bond distances and redox potentials. The observed temperature-dependent magnetism of the blue dimer is consistent with a delocalized, diamagnetic singlet state (dπ(1)*)(2) with a low-lying, paramagnetic triplet state (dπ(1)*)(1)(dπ(2)*)(1). Systematic structural-magnetic-IR correlations are observed between ν(sym)(RuORu) and ν(asym)(RuORu) vibrational energies and magnetic properties in a series of ruthenium-based, μ-oxo-bridged complexes. Consistent with the DFT electronic structure model, bending along the Ru-O-Ru axis arises from a Jahn-Teller distortion with ∠Ru-O-Ru dictated by the distortion and electron-electron repulsion.     

甲烷氧化偶联Mn_2O_3-Na_2WO_4/SiO_2催化剂——Ⅲ.高温(700—800℃)XRD和XPS研究

在本工作的研究报导Ⅰ和Ⅱ(见本期477页和481页)中,已对Mn_2O_3-Na_2WO_4/SiO_2催化剂活性相的表面分散状态、表面氧种和表面结构进行了详细表征。但甲烷氧化偶联反应在高温(700—800℃)下进行。本文进一步对该催化剂在此反应高温下的XRD和XPS研究表明,其表面状态较室温下有显著变化,结合前文的室温下表征结果,使我们对高温反应条件下该催化剂组分间协同作用、表面活性氧种和活性位结构性质有了进一步的理解,并有可能对其甲烷催化活化机理进行较为深入的探讨。     

缓冲溶液阴离子对三价铜催化剂催化水氧化过程的影响

水氧化是光解水制氢气的瓶颈反应,认识和理解水氧化机制并研发廉价稳定的催化剂对解决这一问题尤为重要.自1982年Meyer课题组报道了第一例分子型双核钌水氧化催化剂(blue dimer)以来,过渡金属配合物被广泛应用于探索这一氧化过程的规律和机理,特别是近几年廉价金属配合物在水氧化领域的应用也备受关注.由于水氧化一般在苛刻的氧化条件下才可以实现,如何提高过渡金属配合物在催化条件下的稳定性一直是分子催化剂结构设计的一个难点.利用部分分子催化剂的不稳定性,将其作为前体制备非均相金属氧化物催化剂,广泛用于水氧化研究.然而,对于催化水氧化过程中造成分子催化剂不稳定的因素却鲜有探讨.因此,了解分子催化剂和异相活性物种之间原位转化的机理对于分子催化剂设计至关重要.本文考察了大环配体(TAML)的三价铜配合物(TAML-CuⅢ)的氧化还原性质及其电催化水氧化的反应性能.实验结果表明,TAML-CuⅢ的催化水氧化活性与缓冲溶液种类有关,在磷酸盐溶液与碳酸氢钠溶液中均无催化活性,而在硼酸溶液中表现出较高的催化活性.此外,TAML-CuⅢ工具有与本课题组之前报道的TAML-CoⅢ截然不同的电化学行为.TAML-CuⅢ只能发生配体的单电子氧化生成TAML·+-CdⅢ,且该物种无法实现对水分子的活化.进一步实验结果表明,生成的TAML·+-CuⅢ在硼酸根的协助下可以发生进一步氧化和配体的水解,从而生成具有高活性的非均相物种.研究表明该活性物种为含硼的氧化铜物种(B/CuOx).通过本文研究可得出两个结论:(1)具有平面四方构型的三价铜配合物不是一种有效催化水氧化的分子型催化剂;(2)缓冲阴离子在分子催化剂的分解中起到了关键作用.因此,缓冲溶液的选择对催化剂的电化学行为以及稳定性有着重要的影响.     

Colloidal catalysts based on iron(III) oxides. 2. Peculiarities of catalyzed oxidation of palm oil

The catalytic activity of an iron(III)-oxide-based colloidal catalyst with respect to oxidation of palm oil with atmospheric oxygen at 60°C is investigated. In a microheterogeneous system of palm oil containing phospholipids and large amounts of ??-tocopherol and ??-carotene, oxidation in the presence of the catalyst proceeds by a latent radical mechanism. This mechanism manifests itself as oxygen uptake against a background of almost constant concentrations of natural antioxidants, i.e., ??-tocopherol and ??-carotene. Using a model reaction of oxidation of an individual natural olefin, limonene, it is shown that, in the presence of the catalyst and trace amounts of hydroperoxide, oxidation of the hydrocarbon occurs through the chain free-radical mechanism. The presence of a phospholipid (egg lecithin) dramatically decelerates the catalytic oxidation of limonene and makes the process proceed through the latent radical mechanism, the rate of which is unaffected by oil-soluble inhibitors.     

Charged states of α,ω-dicyano β,β'-dibutylquaterthiophene as studied by in situ ESR UV-vis NIR spectroelectrochemistry

The influence of the molecular structure on the stabilization of charged states was studied in detail by in situ ESR UV-vis NIR spectroelectrochemistry at a novel α,ω-dicyano substituted β,β'-dibutylquaterthiophene (DCNDBQT) and the electrochemically generated cation and anion radicals have been proved for the first time. The voltammetry of DCNDBQT results in two separate oxidation steps with the reversible first one. The experimental absorption maxima at 646 and 1052 nm together with the calculated ones (by DFT method) as well as an ESR signal at the first anodic step prove the presence of a radical cation. Three additional optical bands (554, 906, and 1294 nm for CT-transition) can be attributed to the formation of cation radical dimer. The dicationic structure formed in the second oxidation step is not stable. The stabilization proceeds via a dimer formation in two chemical follow-up reactions. The existence of the dimeric structures was proved by ex situ MALDI TOF mass spectrometry. As the substitution by cyano groups opens the route to cathodic reductions, DCNDBQT shows a single quasi-reversible reduction step. Here, the in situ ESR UV-vis NIR spectroelectrochemical measurements and theoretical calculations let us confirm the electrochemical generation of an anion radical. As we found a low number of anion radicals by quantitative ESR spectroelectrochemistry and an appearance of additional bands in the UV-vis NIR absorption spectra, the formation of dimeric structures must be considered and was corroborated by mass spectrometry. The role of dimerization in the reaction mechanism of the DCNDBQT oxidation and reduction are discussed in general. The experimental results were interpreted using the quantum chemical calculations based on density functional theory.     

Electrochemical oxidation of CoCp(CO)2: radical-substrate reaction of a 17 e-/18 e- pair and production of a unique dimer radical

Anodic oxidation of the important half-sandwich compound CoCp(CO)2, 1, has been studied under gentle electrolyte conditions, e.g., chlorinated hydrocarbons with weakly coordinating anion (WCA) supporting electrolyte anions. The 17-electron cation 1+ produced at E(1/2)(1) = 0.37 V vs FeCp2(0/+) undergoes a surprising reaction with neutral 1 to form the dimer radical cation [Co2Cp2(CO)4] +, 2+, which has a metal-metal bond unsupported by bridging ligands. The dimer radical is oxidized at a slightly more positive potential (E(1/2) = 0.47 V) to the corresponding dication 2(2+). Observation of the oxidation of 2+ is without precedent in confirming a radical-substrate (R-S) dimerization process by direct voltammetric detection of the R-S intermediate, K(eq) = 3 x 10(4) M(-1) for [2+]/[1][1+]. The R-S mechanism and the reaction products have been characterized by voltammetry, electrolysis, fiber-optic IR spectroscopy, and ESR measurements. DFT calculations indicate that removal of an electron from 1 results in rehybridization in 1+, thereby opening the metal center for interaction with the neutral compound 1, which has a relatively basic metal center. The LUMO of the dimer dication 2(2+) is metal-metal antibonding, and its half-occupancy in 2+ results in lengthening of the Co-Co bond from 2.64 A to 3.14 A. Inclusion of solvent in the (COSMO) calculations shows that solvation effects are necessary to account for the fact that E(1/2)(2) > E(1/2)(1). These results show the importance of medium effects in probing the fundamental redox chemistry of half-sandwich metal complexes.     

Cu(bipy)2+/TEMPO-catalyzed oxidation of alcohols: radical or nonradical mechanism?

In the oxidation of alcohols with TEMPO as catalyst, the substrate has alternatively been postulated to be oxidized but uncoordinated TEMPO(+) (Semmelhack) or Cu-coordinated TEMPO(?) radical (Sheldon). The reaction with the Cu(bipy)(2+)/TEMPO cocatalyst system has recently been claimed, on the basis of DFT calculations, to not be a radical reaction but to be best viewed as electrophilic attack on the alcohol C-H(α) bond by coordinated TEMPO(+). This mechanism combines elements of the Semmelhack mechanism (oxidation of TEMPO to TEMPO(+)) and the Sheldon proposal ("in the coordination sphere of Cu"). The recent proposal has been challenged on the basis of DFT calculations with a different functional, which were reported to lead to a radical mechanism. We carefully examine the results for the two functionals and conclude from both the calculated energetics and from an electronic structure analysis that the results of the two DFT functionals are consistent and that both lead to the proposed mechanism with TEMPO not acting as radical but as (coordinated) positive ion.     

Iron(II)‐Catalyzed Biomimetic Aerobic Oxidation of Alcohols

We report the first Fe^II‐catalyzed biomimetic aerobic oxidation of alcohols. The principle of this oxidation, which involves several electron‐transfer steps, is reminiscent of biological oxidation in the respiratory chain. The electron transfer from the alcohol to molecular oxygen occurs with the aid of three coupled catalytic redox systems, leading to a low‐energy pathway. An iron transfer‐hydrogenation complex was utilized as a substrate‐selective dehydrogenation catalyst, along with an electron‐rich quinone and an oxygen‐activating Co(salen)‐type complex as electron‐transfer mediators. Various primary and secondary alcohols were oxidized in air to the corresponding aldehydes or ketones with this method in good to excellent yields.     

Redox behaviour of the dicobalt cofacial porphyrin Co2FTF4 and related complexes adsorbed on graphite electrodes

Adsorbed on graphite electrodes, Co₂FTF4 in a potent catalyst for O₂ reduction by a four-electron mechanism. The two observable redox surface waves have been previously assigned to the two cobalt centres. Using differential pulse polarography (DPP), the behaviour of this dicobalt cofacial dimer was re-examined at different pH values in aqueous solutions and in the presence of potential axial ligands for cobalt. From these observations and from a comparison with other adsorbed porphyrins it can be concluded that (a) the porphyrins are probably adsorbed by strong interactions between graphite and the aromatic rings, and (b) the more negative surface wave is cobalt-based but the more positive one is instead a porphyrin ring oxidation. This implies that the catalyst is in the Co^IICo^IIIFTF4 state when catalytic oxygen reduction begins.     

Iron(II)-Catalyzed Biomimetic Aerobic Oxidation of Alcohols

We report the first Fe^II-catalyzed biomimetic aerobic oxidation of alcohols. The principle of this oxidation, which involves several electron-transfer steps, is reminiscent of biological oxidation in the respiratory chain. The electron transfer from the alcohol to molecular oxygen occurs with the aid of three coupled catalytic redox systems, leading to a low-energy pathway. An iron transfer-hydrogenation complex was utilized as a substrate-selective dehydrogenation catalyst, along with an electron-rich quinone and an oxygen-activating Co(salen)-type complex as electron-transfer mediators. Various primary and secondary alcohols were oxidized in air to the corresponding aldehydes or ketones with this method in good to excellent yields.     

Stable radicals formation in coals undergoing weathering: effect of coal rank

Once coal is excavated it comes into contact with atmospheric oxygen and begins to undergo low temperature oxidation. The mechanism by which the molecular oxygen interacts with the coal macromolecule is suggested to occur in several steps. These steps primarily involve O(2) diffusion to the surface where physical adsorption followed by chemical adsorption takes place. The chemical adsorption forms several types of oxides that can subsequently react to form several products, primarily CO(2). It has also been suggested that some of these oxidation mechanisms might involve radical reactions. As the previous studies were conducted under conditions where significant structural changes occur it is possible that in the low temperature range (T < 100 °C) the oxidation mechanism is different. Several different rank (lignite-subbituminous-bituminous) coals were isothermally heated at 95 °C in an air atmosphere for a period of up to 6 months and samples were collected at two week intervals. The radical concentration of each sample was measured by Continuous Wave Electron Paramagnetic Resonance (CW-EPR). It is apparent that there are distinct differences between the lower rank (lignite) and the higher rank (subbituminous, bituminous) coals. The lower rank coals exhibited only carbon centered radicals with an adjacent oxygen atom and the higher rank coals exhibited only carbon centered radicals. Interestingly, the lower rank coals exhibited no change in radical concentration due to the long term oxidation treatment while the higher rank coals showed a distinct increase in the radical concentration. These findings shed new light on the complex heterogeneous low temperature oxidation reactions occurring at the coal surface.     

Charged states of Sc3N@C68: an in situ spectroelectrochemical study of the radical cation and radical anion of a non-IPR fullerene

The redox behavior of Sc 3N@C 68 is studied systematically by means of electrochemistry, in situ ESR/Vis-NIR spectroelectrochemistry, and detailed theoretical treatment. Formation of the negatively and positively charged paramagnetic species for the same trimetallic nitride endohedral fullerene is demonstrated for the first time. The electrochemical study of Sc 3N@C 68 exhibits two electrochemically irreversible but chemically reversible reduction steps and two reversible oxidation steps. A double-square reaction scheme is proposed to explain the observed redox reaction at cathodic potentials involving the reversible dimerisation of the Sc 3N@C 68 monoanion. The spin state of the radical cation and the radical anion is probed by ESR spectroscopy, indicating that in both states, the large part of the unpaired spin is delocalized on the fullerene cage. The charged states of the non-isolated pentagon rule fullerene are characterized furthermore by in situ absorption spectroscopy. The interpretation of experimental data is supported by the density functional theory (DFT) calculations of the spin distribution in the anion and cation radicals of Sc 3N@C 68 and time-dependent DFT calculations of the absorption spectra of the charged species.     

Density functional theory study of one-dimensional growth of styrene on the hydrogen-terminated Si(001)-(3 x 1) surface

Recent experimental work has shown that the addition of styrene molecules to hydrogen-terminated Si(001) surfaces leads to the formation of one-dimensional molecular structures through a radical-initiated surface chain reaction mechanism. These nanometric structures are observed to be directed parallel to the dimer rows on the H-Si(001)-(2 x 1) surface and perpendicular to the same rows on H-Si(001)-(3 x 1). Using periodic density functional theory (DFT) calculations, we have studied the initial steps of the radical chain mechanism on the H-Si(001)-(3 x 1) surface and compared them to analogous results for H-Si(001)-(2 x 1). On the H-Si(001)-(3 x 1) surface, one of the crucial steps of the surface chain reaction, namely, the abstraction of a H atom from a nearby surface hydride unit, is found to have a somewhat smaller activation energy in the direction perpendicular to the dimer rows (H abstraction from the nearest dihydride site) than along the rows (H abstraction from a neighboring dimer). Additionally, due to the steric repulsion between the styrene molecules and the SiH2 subunits, growth along the dimer rows is not thermodynamically favorable on the (3 x 1) surface. On the other hand, due to the absence of the SiH2 subunits, growth parallel to the Si dimer rows becomes favored on the H-Si(001)-(2 x 1) surface.     

Redox‐Active Ligand Assisted Catalytic Water Oxidation by a RuIV=O Intermediate

Water splitting is one of the most promising solutions for storing solar energy in a chemical bond. Water oxidation is still the bottleneck step because of its inherent difficulty and the limited understanding of the O?O bond formation mechanism. Molecular catalysts provide a platform for understanding this process in depth and have received wide attention since the first Ru‐based catalyst was reported in 1982. Ru^V=O is considered a key intermediate to initiate the O?O bond formation through either a water nucleophilic attack (WNA) pathway or a bimolecular coupling (I2M) pathway. Herein, we report a Ru‐based catalyst that displays water oxidation reactivity with Ru^IV=(O) with the help of a redox‐active ligand at pH 7.0. The results of electrochemical studies and DFT calculations disclose that ligand oxidation could significantly improve the reactivity of Ru^IV=O toward water oxidation. Under these conditions, sustained water oxidation catalysis occurs at reasonable rates with low overpotential (ca. 183 mV).     

Studies of carbon incorporation on the diamond [100] surface during chemical vapor deposition using density functional theory

Accurate potential energy surface calculations are presented for many of the key steps involved in diamond chemical vapor deposition on the [100] surface (in its 2 x 1 reconstructed and hydrogenated form). The growing diamond surface was described by using a large (approximately 1500 atoms) cluster model, with the key atoms involved in chemical steps being described by using a quantum mechanical (QM, density functional theory, DFT) method and the bulk of the atoms being described by molecular mechanics (MM). The resulting hybrid QM/MM calculations are more systematic and/or at a higher level of theory than previous work on this growth process. The dominant process for carbon addition, in the form of methyl radicals, is predicted to be addition to a surface radical site, opening of the adjacent C-C dimer bond, insertion, and ultimate ring closure. Other steps such as insertion across the trough between rows of dimer bonds or addition to a neighboring dimer leading to formation of a reconstruction on the next layer may also contribute. Etching of carbon can also occur; the most likely mechanism involves loss of a two-carbon moiety in the form of ethene. The present higher-level calculations confirm that migration of inserted carbon along both dimer rows and chains should be relatively facile, with barriers of approximately 150 kJ mol (-1) when starting from suitable diradical species, and that this step should play an important role in establishing growth of smooth surfaces.     

Kinetics of the liquid-phase oxidation of cyclooctene in the presence of MnO2

The kinetics of the liquid-phase oxidation of cyclooctene by molecular oxygen in the presence of a MnC₂ catalyst is studied. It is found that MnC₂ is an initiator of this reaction and has no effect on the steps of chain propagation and termination. The oxidation occurs by a radical chain mechanism with the escape of radicals to the bulk of the reaction mixture. Radicals are formed by the interaction of the olefin with the solid catalyst surface. The kinetic parameters of the reaction are calculated.     

Water oxidation catalysed by manganese compounds: from complexes to 'biomimetic rocks'

One of the most fundamental processes of the natural photosynthetic reaction sequence is the light-driven oxidation of water to molecular oxygen. In vivo, this reaction takes place in the large protein ensemble Photosystem II, where a μ-oxido-Mn(4)Ca- cluster, the oxygen-evolving-complex (OEC), has been identified as the catalytic site for the four-electron/four-proton redox reaction of water oxidation. This Perspective presents recent progress for three strategies which have been followed to prepare functional synthetic analogues of the OEC: (1) the synthesis of dinuclear manganese complexes designed to act as water-oxidation catalysts in homogeneous solution, (2) heterogeneous catalysts in the form of clay hybrids of such Mn(2)-complexes and (3) the preparation of manganese oxide particles of different compositions and morphologies. We discuss the key observations from the studies of such synthetic manganese systems in order to shed light upon the catalytic mechanism of natural water oxidation. Additionally, it is shown how research in this field has recently been motivated more and more by the prospect of finding efficient, robust and affordable catalysts for light-driven water oxidation, a key reaction of artificial photosynthesis. As manganese is an abundant and non-toxic element, manganese compounds are very promising candidates for the extraction of reduction equivalents from water. These electrons could consecutively be fed into the synthesis of "solar fuels" such as hydrogen or methanol.     

Extreme conformational constraints in pi-extended tetrathiafulvalenes: unusual topologies and redox behavior of doubly and triply bridged cyclophanes

Doubly and triply bridged 9,10-bis(1,3-dithiol-2-ylidene)-9,10-dihydroanthracene (ex-TTF) derivatives have been synthesized. Key steps are the generation and macrocyclization reactions of ex-TTF-dithiolate reagents. The X-ray crystal structures of the doubly bridged cyclophanes 15 and 16 and the triply bridged system 23 show that the saddle-like conformation of the ex-TTF framework is enhanced by the short bridges between the dithiole rings. Unlike all previous ex-TTF derivatives (which display a single quasi-reversible two-electron oxidation wave, D0 --> D2+), cyclic voltammetry of the cyclophanes reveals two reversible, one-electron oxidation steps (D0 --> D*+ --> D2+), with differences between the half-wave potentials (E2(1/2) - E1(1/2)) of 0.22-0.26 V. The conformational changes and gain in aromaticity which drive the second oxidation process in unrestricted ex-TTF systems (including singly bridged cyclophanes) have been prevented by multiple bridging. The radical cation species gives rise to a very broad, low-energy band (lambdamax = 2175 and 2040 nm for 15 and 21, respectively), assigned to an intramolecular interaction. The steric constraints imposed by multiple bridging have become so extreme that the pi-framework of 15, 16, 21, and 23 exhibits remarkable optical and redox behavior which is not characteristic of ex-TTF systems.     

Dinuclear and mononuclear manganese(IV)-radical complexes and their catalytic catecholase activity

Seven o-aminophenol ligands based on aniline and m-phenylenediamine, which act as mono- and di-nucleating non-innocent ligands, respectively, together with their seven Mn(IV)-complexes, 1-7 are described. One of them, 1, is dinuclear and 2-7 are mononuclear, in which the ligands are coordinated in their oxidized o-iminobenzosemiquinone radical forms. The crystal structures of 1 and 3 were determined by X-ray diffraction and the electronic structures were established by various physical methods including EPR and variable-temperature (2-290 K) susceptibility measurements. Electrochemical measurements (CV and SQW) indicate primarily ligand-centered redox processes. The Mn(IV)-radical complexes, 1-7, catalyze the oxidation of 3,5-di-tert-butylcatechol with molecular oxygen as the sole oxidant to afford 3,5-di-tert-butylquinone quantitatively under mild conditions to mimic the function of the copper-containing enzyme catechol oxidase. An "on-off" mechanism of the radicals without redox participation of the metal center is proposed for the catalytic oxidation process. Complex 1 is found to be a good catalyst for oxidative C-C coupling of hindered phenols to diphenoquinones.