Ruthenium-catalyzed C-H/CO/Olefin coupling reaction of N-arylpyrazoles. Extraordinary reactivity of N-arylpyrazoles toward carbonylation at C-H bonds

The reaction of 1-arylpyrazoles with CO and ethylene in the presence of Ru(3)(CO)(12) resulted in regioselective carbonylation at the ortho C-H bonds. While it is found that the pyrazole ring also functions as the directing group for C-H bond cleavage, the efficiency of the reaction depends on the position of the pyrazole ring.     

One-pot borylation/amination reactions: syntheses of arylamine boronate esters from halogenated arenes

[reaction: see text] A one-pot protocol for converting 1,3- and 1,4-substituted aryl halides to arylamine boronate esters is described. This is achieved by sequential Ir-catalyzed aromatic borylation at the least hindered C-H bond of the aryl halide and subsequent Pd-catalyzed C-N coupling at the halide position of the crude arylboronic ester.     

Nickel(0)-catalyzed isomerization of an aryne complex: formation of a dinuclear Ni(I) complex via C-H rather than C-F bond activation

The reaction of the aryne complex (PEt3)2Ni(eta2-C6H2-4,5-F2) with a catalytic amount of Ni(PEt3)2 results in a dinuclear Ni(I) complex from the coupling of the isomer (PEt3)2Ni(eta2-C6H2-3,4-F2), obtained via rearrangement of the aromatic C-H bonds, which demonstrates that Ni(PEt3)2 is kinetically capable of C-H bond activation, even in the presence of C-F bonds. The intermediate [(PEt3)2Ni]2(mu-eta2:eta2-C6H2-4,5-F2) was isolated and crystallographically characterized; the mu-eta2:eta2-bonding mode observed is unprecedented in aryne chemistry.     

Room-temperature regioselective C-H/olefin coupling of aromatic ketones using an activated ruthenium catalyst with a carbonyl ligand and structural elucidation of key intermediates

Mechanistic studies of the ruthenium-catalyzed reaction of aromatic ketones with olefins are presented. Treatment of the original catalyst, RuH(2)(CO)(PPh(3))(3), with trimethylvinylsilane at 90 °C for 1-1.5 h afforded an activated ruthenium catalyst, Ru(o-C(6)H(4)PPh(2))(H)(CO)(PPh(3))(2), as a mixture of four geometric isomers. The activated complex showed high catalytic activity for C-H/olefin coupling, and the reaction of 2'-methylacetophenone with trimethylvinylsilane at room temperature for 48 h gave the corresponding ortho-alkylation product in 99% isolated yield. The activated catalyst was thermally robust and showed excellent catalytic activity under refluxing toluene conditions. (1)H and (31)P NMR studies of the C-H/olefin coupling at room temperature suggested that an ortho-ruthenated complex, P,P'-cis-C,H-cis-Ru(2'-(6'-MeC(6)H(4)C(O)Me))(H)(CO)(PPh(3))(2), participated in the reaction as a key intermediate. Isotope labeling studies using acetophenone-d(5) indicated that the rate-limiting step was the C-C bond formation, not the C-H bond cleavage, and that each step prior to the reductive elimination was reversible. The rate of C-H/olefin coupling was found to exhibit pseudo first-order kinetics and to show first-order dependence on the ruthenium complex concentration.     

A three-step synthesis of 4-(4-iodo-1H-pyrazol-1-yl)piperidine, a key intermediate in the synthesis of Crizotinib

4-(4-Iodo-1H-pyrazol-1-yl)piperidine is a key intermediate in the synthesis of Crizotinib. We report a robust three-step synthesis that has successfully delivered multi-kilogram quantities of the key intermediate. The process includes nucleophilic aromatic substitution of 4-chloropyridine with pyrazole, followed by hydrogenation of the pyridine moiety and subsequent iodination of the pyrazole which all required optimization to ensure successful scale-up.     

Manifestation of stereoelectronic effects on the calculated carbon-hydrogen bond lengths and one bond (1)J(C-H) NMR coupling constants in cyclohexane,six-membered heterocycles,and cyclohexanone derivatives

Cyclohexane (1), oxygen-, sulfur-, and/or nitrogen-containing six-membered heterocycles 2-5, cyclohexanone (6), and cyclohexanone derivatives 7-16 were studied theoretically [B3LYP/6-31G(d,p) and PP/IGLO-III//B3LYP/6-31G(d,p) methods] to determine the structural (in particular C-H bond distances) and spectroscopic (specifically, one bond (1)J(C-H) NMR coupling constants) consequences of stereoelectronic hyperconjugative effects. The results confirm the importance of n(X) --> sigma*(C-H)(app) (where X = O, N), sigma(C-H)(ax) --> pi*(C=O), sigma(S-C) --> sigma*(C-H)(app), sigma(C-S)-->sigma*(C-H)(app), beta-n(O) --> sigma*(C-H), and sigma(C-H) --> sigma*(C-H)(app) hyperconjugation, as advanced in previous theoretical models. Calculated r(C-H) bond lengths and (1)J(C-H) coupling constants for C-H bonds participating in more than one hyperconjugative interaction show additivity of the effects.     

Oxidative properties of a nonheme Ni(II)(O2) complex: Reactivity patterns for C-H activation, aromatic hydroxylation and heteroatom oxidation

Density functional theory calculations on the reactivity of a Ni(II)-superoxo complex in C-H bond activation, aromatic hydroxylation and heteroatom oxidation reactions have been explored; the Ni(II)-superoxo complex is able to react with substrates with weak C-H bonds and PPh(3).     

Synthesis, structure and characterization of M---Sn (M=Mo, W) bonded heterobimetallic complexes containing bis(pyrazol-1-yl)methane ligands

The reaction of bis(pyrazol-1-yl)methane tetracarbonylmolybdenum(0) or tungsten(0) complexes with RSnCl₃ (R=Ph, Cl) at room temperature yielded heterobimetallic complexes CH₂(Pz)₂M(CO)₃(Cl)(SnCl₂R) (Pz represents substituted pyrazole; M=Mo or W; R=Ph or Cl) in good yields, which have been characterized by elemental analysis, ¹H NMR and IR spectroscopy. The reaction of bis(3,5-dimethyl-4-halopyrazol-1-yl)methane tetracarbonyl tungsten with PhSnCl₃ did not take place even in refluxing CH₂Cl₂. The electronic and steric characteristics of substituents on the pyrazole ring remarkably influence the structures of the products. The structures of CH₂(3,5-Me₂-4-BrPz)₂W(CO)₃(Cl)(SnCl₃) (8) and CH₂(4-BrPz)₂Mo(CO)₃(μ-Cl)(SnCl₂Ph) (17) (Pz: pyrazole) determined by X-ray crystallography show that no chlorine-bridged W---Sn bond is observed in complex 8, while one chlorine-bridged Mo---Sn bond exists in complex 17. The Sn---M bond length is 2.7438(5) Å in complex 8 (W---Sn) and 2.7559(4) Å in complex 17 (Mo---Sn).     

Formation of a 1-bicyclo[1.1.1]pentyl anion and an experimental determination of the acidity and C-H bond dissociation energy of 3-tert-butylbicyclo[1.1.1]pentane

Decarboxylation of 1-bicyclo[1.1.1]pentanecarboxylate anion does not afford 1-bicyclo[1.1.1]pentyl anion as previously assumed. Instead, a ring-opening isomerization which ultimately leads to 1,4-pentadien-2-yl anion takes place. A 1-bicyclo[1.1.1]pentyl anion was prepared nevertheless via the fluoride-induced desilylation of 1-tert-butyl-3-(trimethylsilyl)bicyclo[1.1.1]pentane. The electron affinity of 3-tert-butyl-1-bicyclo[1.1.1]pentyl radical (14.8 plus minus 3.2 kcal/mol) was measured by bracketing, and the acidity of 1-tert-butylbicyclo[1.1.1]pentane (408.5 +/- 0.9) was determined by the DePuy kinetic method. These values are well-reproduced by G2 and G3 calculations and can be combined in a thermodynamic cycle to provide a bridgehead C-H bond dissociation energy (BDE) of 109.7 +/- 3.3 kcal/mol for 1-tert-butylbicyclo[1.1.1]pentane. This bond energy is the strongest tertiary C-H bond to be measured, is much larger than the corresponding bond in isobutane (96.5 +/- 0.4 kcal/mol), and is more typical of an alkene or aromatic compound. The large BDE can be explained in terms of hybridization.     

Preparation of annulated nitrogen-containing heterocycles via a one-pot palladium-catalyzed alkylation/direct arylation sequence

[reaction: see text] A palladium-catalyzed/norbornene-mediated sequential coupling reaction involving an aromatic sp(2) C-H functionalization as the key step is described, in which an alkyl-aryl bond and an aryl-heteroaryl bond are formed in one pot. A variety of highly substituted six- and seven-membered annulated pyrroles and pyrazoles were synthesized in a one-step process in good yields from readily accessible N-bromoalkyl pyrroles or pyrazoles and aryl iodides.     

1,2-Dicarba-closo-dodecaboran-1-yl naphthalene derivatives

1,2-Dicarba-closo-dodecaboranes (o-carboranes) and naphthalenes have potential value as components or building blocks for supramolecular systems. We have efficiently synthesized 1-(1,2-dicarba-closo-dodecaboran-1-yl)naphthalene and 2-(1,2-dicarba-closo-dodecaboran-1-yl)naphthalene derivatives by employing three preparative methods: cyclization of the corresponding acetylenes with decaborane(14), an Ullmann-type coupling reaction of carboranes with aryl halide, and the aromatic nucleophilic substitution (S(N)Ar) reaction of aryl-o-carboranes with nitrophenyl halide. The optimum conditions of each method for synthesis of the title compounds were also investigated.     

Chemoselective aminomethylation of bifunctional substrates: carbonyl versus phenolic hydroxyl,carbonyl versus pyrazole and pyrrole versus phenolic hydroxyl as competing activating groups

Chemoselectivity in the Mannich reaction for three different types of bifunctional substrates has been investigated. 1-Hydroxy-2-naphthalenylethanone affords either phenolic Mannich bases at high pH (free amines), or ketonic Mannich bases at low pH (amine hydrochlorides), whereas the use of N,N-dimethylmethyleneiminium chloride as a preformed dimethylaminomethylation reagent gave the phenolic Mannich base. 1-Aryl-3-(1H-pyrazol-1-yl)-1-propanones undergo aminomethylation at position 4 of the pyrazole ring, and not at the methylene group α to the carbonyl function, regardless of the reaction conditions. 4-(2,5-Dimethyl-1H-pyrrol-1-yl)phenol is aminomethylated chemoselectively on the pyrrole ring under mild reaction conditions.     

Ultrafast UV pump/IR probe studies of C-H activation in linear,cyclic, and aryl hydrocarbons

The photochemical C-H activation reactions of eta(3)-TpRh(CO)(2) (Tp = HB-Pz(3), Pz = 3,5-dimethylpyrazolyl) and CpRh(CO)(2) (Cp = C(5)H(5)) have been studied in a series of linear, cyclic, and aromatic hydrocarbon solvents on a femtosecond to microsecond time scale. These results have revealed that the structure of the hydrocarbon substrate affects the final C-H bond activation step, which is in accordance with the known preference of bond activation toward primary C-H sites. In the case of aromatic C-H activation, the reaction is divided into parallel channels involving sigma- and pi-solvated intermediates. Results for the analogous CpRh(CO)(2) molecule have shown that the coordination of the cyclopentadienyl ligand does not play a direct role in the dynamics of the reaction, in contrast to the C-H activation mechanism observed in eta(3)-TpRh(CO)(2) studies.     

Ru3(CO)12-catalyzed C-H/CO/olefin coupling of N-pyridylindolines. Direct carbonylation at a C-H bond delta to the pyridine nitrogen

The reaction of N-pyridylindolines with CO and ethylene in the presence of Ru3(CO)12 results in direct carbonylation at a C-H bond delta to the pyridine sp2 nitrogen, which represents a new type of C-H/CO/olefin coupling. The presence of a pyridine ring as a directing group on the substrates is essential for the reaction to proceed. The choice of N,N-dimethylacetamide (DMA) as the solvent is crucial for the reaction to proceed efficiently.     

A Mechanistic Switch in C-H Bond Activation by Elusive Fe\begin{document}$^\text{V}$\end{document}(O)(TAML) Reaction Intermediate: A Theoretical Study

The divergent behavior of C-H bond oxidations of aliphatic substrates compared to those of aromatic substrates shown in Gupta's experiment was mechanistically studied herein by means of density functional theory calculations. Our calculations reveal that such difference is caused by different reaction mechanisms between two kinds of substrates (the aliphatic cyclohexane, 2, 3-dimethylbutane and the aromatic toluene, ethylbenzene and cumene). For the aliphatic substrates, C-H oxidation by the oxidant Fe\begin{document}$^{\rm{V}}$\end{document}(O)(TAML) is a hydrogen atom transfer process; whereas for the aromatic substrates, C-H oxidation is a proton-coupled electron transfer (PCET) process with a proton transfer character on the transition state, that is, a proton-coupled electron transfer process holding a proton transfer-like transition state (PCET(PT)). This difference is caused by the strong \begin{document}$\pi$\end{document}-\begin{document}$\pi$\end{document} interactions between the tetra-anionic TAML ring and the phenyl ring of the aromatic substrates, which has a "pull" effect to make the electron transfer from substrates to the Fe=O moiety inefficient.     

Tautomerism in the solid state and in solution of a series of 6-aminofulvene-1-aldimines

To study systems able to sustain intramolecular proton-transfer, we have prepared a series of six aminofulvene aldimines including several labeled with (15)N and (2)H. These compounds show coupling constants through the hydrogen bond, (1h)J((15)N- (1)H) and (2h)J((15)N-(15)N). The position of the tautomeric equilibria, i.e., on what nitrogen atom is the proton, was determined in the solid state and in solution. The crystal structure of N[[5-[(phenylamino)methylene]-1,3-cyclopentadien-1-yl]methylene]pyrrole-1-amine (3) has been determined by X-ray analysis. In solution, both N-H and C-H tautomers were observed and their structures assigned by NMR spectroscopy. Particularly useful is the value of the (1)J((15)N-(1)H) coupling constant.     

Self condensation of enamines mediated by acetylation. A novel approach to 1-(azol-5-yl)-(1E,3Z)-butadiene-4-N,N-dimethylamines

Novel self-condensation of 3-(azol-5-yl)-1,1-dimethylenamines has been found to form new C-C bonds leading to 2,4-(1,2,3-triazole-1,2,3-thiadiazole-3-phenylisothiazole)-(1E,3Z)-5-yl-butadiene-1-amines. The discovered reaction represents a new example of C-H functionalization in unsaturated systems and can serve an efficient synthetic approach to rational design of new 2,4-(diazole-5-yl)-dieneamines.     

Ligand properties of aromatic azines: C-H activation, metal induced disproportionation and catalytic C-C coupling reactions

The reaction of aromatic azines with Fe₂(CO)₉ yields dinuclear iron carbonyl cluster compounds as the main products. The formation of these compounds may be rationalized by a C-H activation reaction at the aromatic substituent in ortho position with respect to the exocyclic C-N double bond followed by an intramolecular shift of the corresponding hydrogen atom toward the former imine carbon atom. The second imine function of the ligand does not react. Additional products arise from the metal induced disproportionation of the azine into a primary imine and a nitrile. So also one of the imine C-H bonds may be activated during the reaction. Depending on the aromatic substituent of the azine ligands iron carbonyl complexes of the disproportionation products are isolated and characterized by X-ray crystallography. C-C coupling reactions catalyzed by Ru₃(CO)₁₂ result in the formation of ortho-substituted azines. In addition, ortho-substituted nitriles are identified as side-products showing that the metal induced disproportionation reaction also takes place under catalytic conditions.     

5-Alkynyl-2′-deoxyuridines, containing bulky aryl groups: evaluation of structure-anti-HSV-1 activity relationship

Four 5-alkynyl-2′-deoxyuridines containing different bulky substituents and flexible linkers between the triple bond and the aromatic residue have been prepared and tested against HSV-1 in Vero cells. Two nucleosides containing carbonyl groups, 5-(4-benzoylphenoxypropyn-1-yl)-2′-deoxyuridine (19a) and 5-(estron-3-yloxypropyn-1-yl)-2′-deoxyuridine (19c), showed low cytotoxicity and moderate antiviral activity. The flexible linker appears not to be favorable for antiviral properties of 5-alkynyl-2′deoxyuridines: 5-[(perylen-3-yl)methoxypropyn-1-yl]-2′-deoxyuridine (19d) showed considerable cytotoxicity and no antiviral activity in contrast to the active and nontoxic 5-(perylen-3-ylethynyl)-2′-deoxyuridine (9), a nucleoside with a rigid triple-bond-connection of the aromatic system to the nucleobase.     

Zipper-mode double C-H activation: palladium-catalyzed direct construction of highly-fused heterocyclic systems

Direct construction of fused aromatic ring systems by "zipper-mode" double C-H bond activation is described. Treatment of (Z)-3-bromo-N-(2-bromo-3-phenylprop-2-enyl)aniline derivatives with a catalytic amount of Pd(OAc)2 and PCy3.HBF4 in the presence of Cs2CO3 in dioxane affords 4,5-naphtho[3,2,1-cd]indole derivatives in good yields. Introduction of heterocycles such as benzofuran, benzothiophene, or indole moieties into the substrates leads to the efficient construction of highly fused heterocyclic aromatic ring systems via C-H bond activation of the heteroaromatic rings.