Click chemistry in mesoporous materials: functionalization of porous silicon rugate filters

In this paper we report the use of the optical properties of porous silicon photonic crystals, combined with the chemical versatility of acetylene-terminated SAMs, to demonstrate the applicability of "click" chemistry to mesoporous materials. Cu(I)-catalyzed alkyne-azide cycloaddition reactions were employed to modify the internal pore surfaces through a two-step hydrosilylation/cycloaddition procedure. A positive outcome of this catalytic process, here performed in a spatially confined environment, was only observed in the presence of a ligand-stabilized Cu(I) species. Detailed characterization using Fourier transform infrared spectroscopy and optical reflectivity measurements demonstrated that the surface acetylenes had reacted in moderate to high yield to afford surfaces exposing chemical functionalities of interest. The porous silicon photonic crystals modified by the two-step strategy, and exposing oligoether moieties, displayed improved resistance toward the nonspecific adsorption of proteins as determined with fluorescently labeled bovine serum albumin. These results demonstrate that "click" immobilization offers a versatile, experimentally simple, and modular approach to produce functionalized porous silicon surfaces for applications as diverse as porous silicon-based sensing devices and implantable biomaterials.     

Biofunctionalization on alkylated silicon substrate surfaces via "click" chemistry

Biofunctionalization of silicon substrates is important to the development of silicon-based biosensors and devices. Compared to conventional organosiloxane films on silicon oxide intermediate layers, organic monolayers directly bound to the nonoxidized silicon substrates via Si-C bonds enhance the sensitivity of detection and the stability against hydrolytic cleavage. Such monolayers presenting a high density of terminal alkynyl groups for bioconjugation via copper-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC, a "click" reaction) were reported. However, yields of the CuAAC reactions on these monolayer platforms were low. Also, the nonspecific adsorption of proteins on the resultant surfaces remained a major obstacle for many potential biological applications. Herein, we report a new type of "clickable" monolayers grown by selective, photoactivated surface hydrosilylation of α,ω-alkenynes, where the alkynyl terminal is protected with a trimethylgermanyl (TMG) group, on hydrogen-terminated silicon substrates. The TMG groups on the film are readily removed in aqueous solutions in the presence of Cu(I). Significantly, the degermanylation and the subsequent CuAAC reaction with various azides could be combined into a single step in good yields. Thus, oligo(ethylene glycol) (OEG) with an azido tag was attached to the TMG-alkyne surfaces, leading to OEG-terminated surfaces that reduced the nonspecific adsorption of protein (fibrinogen) by >98%. The CuAAC reaction could be performed in microarray format to generate arrays of mannose and biotin with varied densities on the protein-resistant OEG background. We also demonstrated that the monolayer platform could be functionalized with mannose for highly specific capturing of living targets (Escherichia coli expressing fimbriae) onto the silicon substrates.     

Preparation and characterization of pore-wall modification gradients generated on porous silicon photonic crystals using diazonium salts

One-dimensional photonic crystals (rugate filters) constructed from porous silicon were modified by the chemical hydrosilylation of terminal alkenes (decyl, 10-carboxydecyl, and 10-hydroxydecyl) in the presence of a concentration gradient of diazonium salt initiators. The concentration gradient was generated by vertically orienting the Si wafer containing the porous Si layer in an alkene solution and then introducing the diazonium salt at the bottom edge of the wafer. Slow diffusion of the salt led to a varying density of grafted alkene across the surface of the porous layer. The modified surfaces were end-capped with methyl groups by electrochemical grafting to impart improved stability and greater hydrophobicity. The surface modified with 10-carboxydecyl species was ionized by deprotonation of the carboxy groups to increase the hydrophilicity of this porous silicon surface. The pore-wall modification gradients were characterized using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS). The more hydrophilic portion of the gradient changes color when water infiltrates the porous nanostructure because of a shift in the stop band of the photonic crystal. The more hydrophobic portion of the gradient excludes water, although mixtures of water and ethanol will infiltrate this region, depending on the concentration of ethanol in the mixture. A simple visual sensor for small quantities of ethanol in water, capable of detecting ethanol concentrations of between 0 and 8% with a resolution of 1% is demonstrated.     

"Click" immobilization on alkylated silicon substrates: model for the study of surface bound antimicrobial peptides

We describe an effective approach for the covalent immobilization of antimicrobial peptides (AMPs) to bioinert substrates via Cu(I) -catalyzed azide-alkyne cycloaddition (CuAAC). The bioinert substrates were prepared by surface hydrosilylation of oligo(ethylene glycol) (OEG) terminated alkenes on hydrogen-terminated silicon surfaces. To render the OEG monolayers "clickable", mixed monolayers were prepared using OEG-alkenes with and without a terminal alkyne protected by a trimethylgermanyl (TMG) group. The mixed monolayers were characterized by X-ray photoelectron spectroscopy (XPS), elliposometry and contact angle measurement. The TMG protecting group can be readily removed to yield a free terminal alkyne by catalytic amounts of Cu(I) in an aqueous media. This step can then be combined with the subsequent CuAAC reaction. Thus, the immobilization of an azide modified AMP (N3-IG-25) was achieved in a one-pot deprotection/coupling reaction. Varying the ratio of the two alkenes in the deposition mixture allowed for control over the density of the alkynyl groups in the mixed monolayer, and subsequently the coverage of the AMPs on the monolayer. These samples allowed for study of the dependence of antimicrobial activities on the AMP density. The results show that a relative low coverage of AMPs (～1.6×10(13) molecule per cm(2)) is sufficient to significantly suppress the viability of Pseudomonas aeruginosa, while the surface presenting the highest density of AMPs (～2.8×10(13) molecule per cm(2)) is still cyto-compatible. The remarkable antibacterial activity is attributed to the long and flexible linker and the site-specific "click" immobilization, which may facilitate the covalently attached peptides to interact with and disrupt the bacterial membranes.     

A citric acid-derived ligand for modular functionalization of metal oxide surfaces via "click" chemistry

Citric acid is a widely used surface-modifying ligand for growth and processing of a variety of nanoparticles; however, the inability to easily prepare derivatives of this molecule has restricted the development of versatile chemistries for nanoparticle surface functionalization. Here, we report the design and synthesis of a citric acid derivative bearing an alkyne group and demonstrate that this molecule provides the ability to achieve stable, multidentate carboxylate binding to metal oxide nanoparticles, while also enabling subsequent multistep chemistry via the Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction. The broad utility of this strategy for the modular functionalization of metal oxide surfaces was demonstrated by its application in the CuAAC modification of ZnO, Fe(2)O(3), TiO(2), and WO(3) nanoparticles.     

Oxidative acetylenic coupling reactions as a surface chemistry tool

A novel method to prepare redox monolayers on silicon electrodes has been developed that employs Cu(I)-catalyzed oxidative acetylenic coupling reactions for molecular electronic type applications. As the first case study, ethynylferrocene was covalently immobilized onto an acetylene-terminated monolayer on a Si(100) surface to give a 1,3-diyne (C≡C-C≡C-) linked redox assembly. The derivatization process requires no protection/de-protection steps, nor activation procedures. The effect of the conjugated diyne linkage on the rate of electron transfer between tethered ferrocenyl units and the silicon electrode is benchmarked against well-established "click" products (i.e. 1,2,3-triazole linkage). The surfaces, after each step, are characterized thoroughly using X-ray reflectivity (XRR), X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The coupling chemistry provides a useful strategy for functionalizing silicon surfaces and contributes to an expanding repertoire of wet chemistry routes for the functionalization of solid substrates.     

Tandem "click" reactions at acetylene-terminated Si(100) monolayers

We demonstrate a simple method for coupling alkynes to alkynes. The method involves tandem azide-alkyne cycloaddition reactions ("click" chemistry) for the immobilization of 1-alkyne species onto an alkyne modified surface in a one-pot procedure. In the case presented, these reactions take place on a nonoxidized Si(100) surface although the approach is general for linking alkynes to alkynes. The applicability of the method in the preparation of electrically well-behaved functionalized surfaces is demonstrated by coupling an alkyne-tagged ferrocene species onto alkyne-terminated Si(100) surfaces. The utility of the approach in biotechnology is shown by constructing a DNA sensing interface by derivatization of the acetylenyl surface with commercially available alkyne-tagged oligonucleotides. Cyclic voltametry, electrochemical impedance spectroscopy, X-ray photoelectron spectroscopy, and X-ray reflectometry are used to characterize the coupling reactions and performance of the final modified surfaces. These data show that this synthetic protocol gives chemically well-defined, electronically well-behaved, and robust (bio)functionalized monolayers on silicon semiconducting surfaces.     

Enantioselective Nanoporous Carbon Based on Chiral Ionic Liquids

One of the greatest challenges in modern chemical processing is to achieve enantiospecific control in chemical reactions using chiral media such as chiral mesoporous materials. Herein, we describe a novel and effective synthetic pathway for the preparation of enantioselective nanoporous carbon, based on chiral ionic liquids (CILs). CILs of phenylalanine (CIL(Phe)) are used as precursors for the carbonization of chiral mesoporous carbon. We employ circular dichroism spectroscopy, isothermal titration calorimetry (ITC), and chronoamperometry in order to demonstrate the chiral nature of the mesoporous carbon. The approach presented in this paper is highly significant for the development of a new type of chiral porous materials for enantioselective chemistry. In addition, it contributes significantly to our understanding of the structure and nature of chiral nanoporous materials and surfaces.     

Fabrication of highly antireflective silicon surfaces with superhydrophobicity

Highly antireflective porous silicon surfaces with superhydrophobicity were obtained by means of chemical etching and fluoroalkylsilane self-assembly. The results show that wettability and reflectivity of these surfaces strongly depend on the etching method and the resultant surface morphology. All of the four resultant porous silicon surfaces by alkaline etching, acidic etching, thick Pt-assisted acidic etching, and thin Pt-assisted acidic etching can reduce reflectance, but the efficiency differs greatly. Except for the alkaline etching, the porous silicon surfaces produced by the other three etching methods can reach superhydrophobicity after fluoroalkylsilane modification. These differences are due to the different surface morphology and roughness. Moreover, the porous silicon surface produced by thin Pt-assisted acidic etching presents abundant holes and particles with diameters ranging from nanometers to submicrometers. This morphology enables the porous silicon surface to own a very low reflectance value that is averaged to be about 3% over the whole experimental photon wavelength spanning 300-800 nm.     

Protein adsorption and cell adhesion on RGD-functionalized silicon substrate surfaces

A method was developed to modify silicon surfaces with good protein resistance and specific cell attachment. A silicon surface was initially deposited using a block copolymer of N-vinylpyrrolidone (NVP) and 2-hydroxyethyl methacrylate (HEMA) (PVP-b-PHEMA) film through surface-initiated atom transfer radical polymerization and then further immobilized using a short arginine-glycine-aspartate (RGD) peptide. Our results demonstrate that the RGD-modified surfaces (Si-RGD) can suppress non-specific adsorption of proteins and induce the adhesion of L929 cells. The Si-RGD surface exhibited higher cell proliferation rates than the unmodified silicon surface. This research established a simple method for the fabrication of dual-functional silicon surface that combines antifouling and cell attachment promotion.     

Discrete complexes immobilized onto click-SBA-15 silica: controllable loadings and the impact of surface coverage on catalysis

Azidopropyl functionalized mesoporous silica SBA-15 were prepared with variable azide loadings of 0.03-0.7 mmol g(-1) (~2-50% of maximal surface coverage) through a direct synthesis, co-condensation approach. These materials are functionalized selectively with ethynylated organic moieties through a copper-catalyzed azide alkyne cycloaddition (CuAAC) or "click" reaction. Specific loading within a material can be regulated by either the azide loading or limiting the alkyne reagent relative to the azide loading. The immobilization of ferrocene, pyrene, tris(pyridylmethyl)amine (TPA), and iron porphyrin (FeTPP) demonstrates the robust nature and reproducibility of this two-step synthetic attachment strategy. Loading-sensitive pyrene fluorescence correlates with a theoretically random surface distribution, rather than a uniform one; site-isolation of tethered moieties ~15 ? in length occurs at loadings less than 0.02 mmol g(-1). The effect of surface loading on reactivity is observed in the oxygenation of SBA-15-[Cu(I)(TPA)]. SBA-15-[Mn(II)(TPA)]-catalyzed epoxidation exhibits a systematic dependence on surface loading. A comparison of homogeneous, site-isolated and site-dense complexes provides insight into catalyst speciation and ligand activity.     

Nanoscale water condensation on click-functionalized self-assembled monolayers

We have examined the nanoscale adsorption of molecular water under ambient conditions onto a series of well-characterized functionalized surfaces produced by Cu(I)-catalyzed alkyne-azide cycloaddition (CuAAC or "click") reactions on alkyne-terminated self-assembled monolayers on silicon. Water contact angle (CA) measurements reveal a range of macroscopic hydrophilicity that does not correlate with the tendency of these surfaces to adsorb water at the molecular level. X-ray reflectometry has been used to follow the kinetics of water adsorption on these "click"-functionalized surfaces, and also shows that dense continuous molecular water layers are formed over 30 h. For example, a highly hydrophilic surface, functionalized by an oligo(ethylene glycol) moiety (with a CA = 34°) showed 2.9 ? of adsorbed water after 30 h, while the almost hydrophobic underlying alkyne-terminated monolayer (CA = 84°) showed 5.6 ? of adsorbed water over the same period. While this study highlights the capacity of X-ray reflectometry to study the structure of adsorbed water on these surfaces, it should also serve as a warning for those intending to characterize self-assembled monolayers and functionalized surfaces to avoid contamination by even trace amounts of water vapor. Moreover, contact angle measurements alone cannot be relied upon to predict the likely degree of moisture uptake on such surfaces.     

Functionalization of acetylene-terminated monolayers on Si(100) surfaces: a click chemistry approach

In this article, we report the functionalization of alkyne-terminated alkyl monolayers on Si(100) using "click" chemistry, specifically, the Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction of azides with surface-bound alkynes. Covalently immobilized, structurally well-defined acetylene-terminated organic monolayers were prepared from a commercially available terminal diyne species using a one-step hydrosilylation procedure. Subsequent derivatization of the alkyne-terminated monolayers in aqueous environments with representative azide species via a selective, reliable, robust cycloaddition process afforded disubstituted surface-bound [1,2,3]-triazole species. Neither activation procedures nor protection/deprotection steps were required, as is the case with more established grafting approaches for silicon surfaces. Detailed characterization using X-ray photoelectron spectroscopy and X-ray reflectometry demonstrated that the surface acetylenes had reacted in moderate to high yield to give surfaces exposing alkyl chains, oligoether anti-fouling moieties, and functionalized aromatic structures. These results demonstrate that click immobilization offers a versatile, experimentally simple, chemically unambiguous modular approach to producing modified silicon surfaces with organic functionality for applications as diverse as biosensors and molecular electronics.     

Electrochemical "switching" of Si(100) modular assemblies

We report on a modular approach for producing well-defined and electrochemically switchable surfaces on Si(100). The switching of these surfaces is shown to change a Si(100) surface from resistant to cell adsorption to promoting cell adhesion. The electrochemical conversion of the modified electrode surface is demonstrated by X-ray photoelectron spectroscopy, X-ray reflectometry, contact angle and cell adhesion studies.     

Cellular consequences of copper complexes used to catalyze bioorthogonal click reactions

Copper toxicity is a critical issue in the development of copper-based catalysts for copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reactions for applications in living systems. The effects and related toxicity of copper on mammalian cells are dependent on the ligand environment. Copper complexes can be highly toxic, can induce changes in cellular metabolism, and can be rapidly taken up by cells, all of which can affect their ability to function as catalysts for CuAAC in living systems. Herein, we have evaluated the effects of a number of copper complexes that are typically used to catalyze CuAAC reactions on four human cell lines by measuring mitochondrial activity based on the metabolism of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) to study toxicity, inductively coupled plasma mass spectrometry to study cellular uptake, and coherent anti-Stokes Raman scattering (CARS) microscopy to study effects on lipid metabolism. We find that ligand environment around copper influences all three parameters. Interestingly, for the Cu(II)-bis-L-histidine complex (Cu(his)(2)), cellular uptake and metabolic changes are observed with no toxicity after 72 h at micromolar concentrations. Furthermore, we show that under conditions where other copper complexes kill human hepatoma cells, Cu(I)-L-histidine is an effective catalyst for CuAAC labeling of live cells following metabolic incorporation of an alkyne-labeled sugar (Ac(4)ManNAl) into glycosylated proteins expressed on the cell surface. This result suggests that Cu(his)(2) or derivatives thereof have potential for in vivo applications where toxicity as well as catalytic activity are critical factors for successful bioconjugation reactions.     

"Click-functional" block copolymers provide precise surface functionality via spin coating

There are few existing methods for the quantitative functionalization of surfaces, especially for polymeric substrates. We demonstrate that alkyne end-functional diblock copolymers can be used to provide precise areal densities of reactive functionality on both hard (e.g., glass and silicon oxide) and soft (i.e., polymeric) substrates. Alkyne functionality is extremely versatile because the resultant functional surfaces are reactive toward azide functional molecules by Sharpless click chemistry. Spin-coated films of alpha-alkyne-omega-Br-poly( tert-butylacrylate- b-methylmethacrylate) (poly( tBA-MMA)) spontaneously self-assemble on the aforementioned substrates to present a surface monolayer of PtBA with a thickness in the range of 1 to 9 nm. The PMMA block physisorbs to provide multivalent anchoring onto hard substrates and is fixed onto polymer surfaces by interpenetration with the substrate polymer. The areal density of alkyne functional groups is precisely controlled by adjusting the thickness of the block copolymer monolayer, which is accomplished by changing either the spin coating conditions (i.e., rotational speed and solution concentration) or the copolymer molecular weight. The reactivity of surface-bound alkynes, in 1,3-dipolar cycloaddition reactions or by so-called "click chemistry", is demonstrated by covalent surface immobilization of fluorescently labeled azides. The modificed surfaces are characterized by atomic force microscopy (AFM), contact angle, ellipsometry, fluorescent imaging and angle-dependent X-ray photoelectron spectroscopy (ADXPS) measurements. Microarrays of covalently bound fluorescent molecules are created to demonstrate the approach and their performance is evaluated by determining their fluorescence signal-to-noise ratios.     

Anaerobic conditions to reduce oxidation of proteins and to accelerate the copper-catalyzed "Click" reaction with a water-soluble bis(triazole) ligand

Oxidation of protein (bovine albumin serum) by air still occurred under the copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction conditions even in the presence of a Cu(I)-stabilizing tris(triazole) ligand. Anaerobic conditions not only avoided the oxidation of the protein, but also greatly accelerated the CuAAC reaction using a water-soluble bis(triazole) Cu(I) ligand.     

A General Method for Preparing Bridged Organosilanes with Pendant Functional Groups and Functional Mesoporous Organosilicas

New organosilica precursors containing two triethoxysilyl groups suitable for the organosilica material formation through the sol‐gel process were designed and synthesised. These precursors display alkyne or azide groups for attaching targeted functional groups by copper‐catalysed azide–alkyne cycloaddition (CuAAC) and can be used for the preparation of functional organosilicas following two strategies: 1) the functional group is first appended by CuAAC under anhydrous conditions, then the functional material is prepared by the sol‐gel process; 2) the precursor is first subjected to the sol‐gel process, producing porous, clickable bridged silsesquioxanes or periodic mesoporous organosilicas (PMOs), then the desired functional groups are attached by means of CuAAC. Herein, we show the feasibility of both approaches. A series of bridged bis(triethoxysilane)s with different pending organic moieties was prepared, demonstrating the compatibility of the first approach with many functional groups. In particular, we demonstrate that organic functional molecules bearing only one derivatisation site can be used to produce bridged organosilanes and bridged silsesquioxanes. In the second approach, clickable PMOs and porous bridged silsesquioxanes were prepared from the alkyne‐ or azide‐containing precursors, and thereafter, functionalised with complementary model azide‐ or alkyne‐containing molecules. These results confirmed the potential of this approach as a general methodology for preparing functional organosilicas with high loadings of functional groups. Both approaches give rise to a wide range of new functional organosilica materials.     

A fluorogenic ‘click’ reaction of azidoanthracene derivatives

Fluorogenic reactions have broad applications in biolabeling, combinatorial synthesis of fluorescent dyes, and materials development. It was recently reported that the highly selective and efficient Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction can be employed in designing new types of fluorogenic reactions. In this study, we report a fluorogenic reaction using anthracene azides as starting materials. The fluorescence of the anthryl core can be greatly inhibited upon introducing electron-donating azido groups in the proximity. Such weakly fluorescent anthracene azides demonstrate high reactivity with a variety of alkynes under the CuAAC conditions producing a strongly fluorescent triazole product with high quantum yields. This reaction can be used in the synthesis and screening of fluorescent dyes combinatorially. Compared with most existing methods, the fluorogenic CuAAC reaction is a much milder and simpler technique to prepare large libraries of fluorescent dyes without further purification. In order to demonstrate the efficiency of using anthracene azides for biolabeling applications, both small molecules and biomolecules including the multialkyne-derivatized cowpea mosaic virus and tobacco mosaic virus had been studied.     

Bioconjugate functionalization of thermally carbonized porous silicon using a radical coupling reaction

The high stability of Salonen's thermally carbonized porous silicon (TCPSi) has attracted attention for environmental and biochemical sensing applications, where corrosion-induced zero point drift of porous silicon-based sensor elements has historically been a significant problem. Prepared by the high temperature reaction of porous silicon with acetylene gas, the stability of this silicon carbide-like material also poses a challenge--many sensor applications require a functionalized surface, and the low reactivity of TCPSi has limited the ability to chemically modify its surface. This work presents a simple reaction to modify the surface of TCPSi with an alkyl carboxylate. The method involves radical coupling of a dicarboxylic acid (sebacic acid) to the TCPSi surface using a benzoyl peroxide initiator. The grafted carboxylic acid species provides a route for bioconjugate chemical modification, demonstrated in this work by coupling propylamine to the surface carboxylic acid group through the intermediacy of pentafluorophenol and 1-ethyl-3-[3-dimethylaminopropyl]carbodiimide hydrochloride (EDC). The stability of the carbonized porous Si surface, both before and after chemical modification, is tested in phosphate buffered saline solution and found to be superior to either hydrosilylated (with undecylenic acid) or thermally oxidized porous Si surfaces.